static bool check_connect_methode(struct led *led)
{
	int methode = event_get_value(connect_methode);

	if (methode < 1)
		return false;

	return (led->options.connect_methods & CONNECT_METHODE(methode)) != 0;
}

static struct blink_code overlay_connect_error(struct led *led)
{
	enum connect_pairing_values event;

	if (!check_connect_methode(led))
		return BLINK_CODE_SKIP;

	event = event_get_value(connect_pairing);

	if (event == connect_pairing_error ||
	    event == connect_pairing_timeout) {
		return BLINK_CODE(.type = blink_4HZ);
	}

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_connect(struct led *led)
{
	enum connect_pairing_values event;

	if (!check_connect_methode(led))
		return BLINK_CODE_SKIP;

	event = event_get_value(connect_pairing);

	switch (event) {
	case connect_pairing_success:
		return BLINK_CODE(.type = blink_off_on);
	case connect_pairing_start:
		return BLINK_CODE(.type = blink_2HZ);
	case connect_pairing_error:
	case connect_pairing_timeout:
		return BLINK_CODE(.type = blink_4HZ);
	default:
		return BLINK_CODE_SKIP;
	}
}

static struct blink_code default_0_5hz(struct led *led)
{
	return BLINK_CODE(.type = blink_0_5HZ);
}

static struct blink_code default_2hz(struct led *led)
{
	return BLINK_CODE(.type = blink_2HZ);
}

static struct blink_code default_off(struct led *led)
{
	return BLINK_CODE(.type = blink_off);
}

static struct blink_code default_on(struct led *led)
{
	return BLINK_CODE(.type = blink_on);
}

static struct blink_code default_4hz(struct led *led)
{
	return BLINK_CODE(.type = blink_4HZ);
}

static bool any_lan(void)
{
	if (event_get_value(lan1) == lan1_active)
		return true;

	if (event_get_value(lan2) == lan2_active)
		return true;

	if (event_get_value(lan3) == lan3_active)
		return true;

	if (event_get_value(lan4) == lan4_active)
		return true;

	if (event_get_value(lan5) == lan5_active)
		return true;

	return false;
}

static struct blink_code overlay_lan_bridge_no_cable(struct led *led)
{
	if (event_get_value(access_type) != access_type_lan_bridge)
		return BLINK_CODE_SKIP;

	if (!any_lan())
		return BLINK_CODE(.type = blink_0_5HZ);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_wlan_bridge_no_uplink(struct led *led)
{
	enum wlan_sta_values wlan = event_get_value(wlan_sta);

	if (event_get_value(access_type) != access_type_wlan_bridge)
		return BLINK_CODE_SKIP;

	if (event_get_value(wlan_sta_base) != wlan_sta_base_configured)
		return BLINK_CODE_SKIP;

	if (wlan == wlan_sta_register_failed || wlan == wlan_sta_starting ||
	    wlan == wlan_sta_stopping)
		return BLINK_CODE(.type = blink_0_5HZ);

	return BLINK_CODE_SKIP;
}

static int get_wlan_rssi_level(void)
{
	int level = event_get_value(wlan_rssi_level);

	if (level < 0)
		return -1;
	else if (level < 1 * 100 / 6)
		return 0;
	else if (level < 2 * 100 / 6)   /*--- x < 33 ---*/
		return 1;
	else if (level < 3 * 100 / 6)   /*--- x < 50 ---*/
		return 2;
	else if (level < 4 * 100 / 6)   /*--- x < 66 ---*/
		return 3;
	else if (level < 5 * 100 / 6)   /*--- x < 83 ---*/
		return 4;

	return 5;
}

static struct blink_code overlay_wlan_uplink_le_2(struct led *led)
{
	int level = get_wlan_rssi_level();

	if (event_get_value(access_type) != access_type_wlan_bridge)
		return BLINK_CODE_SKIP;

	if (event_get_value(wlan_sta_base) != wlan_sta_base_configured)
		return BLINK_CODE_SKIP;

	if (event_get_value(wlan) != wlan_on)
		return BLINK_CODE_SKIP;

	if (level < 0)
		return BLINK_CODE_SKIP;

	if (level < 2)
		return BLINK_CODE(.type = blink_on);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_plc_low_phyrate(struct led *led)
{
	if (event_get_value(access_type) != access_type_plc_bridge)
		return BLINK_CODE_SKIP;

	if (event_get_value(plc) == plc_low_phyrate)
		return BLINK_CODE(.type = blink_on);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_plc_bridge(struct led *led)
{
	if (event_get_value(access_type) != access_type_plc_bridge)
		return BLINK_CODE_SKIP;

	if (event_get_value(plc) == plc_not_connect)
		return BLINK_CODE(.type = blink_0_5HZ);

	if (event_get_value(plc) == plc_on)
		return BLINK_CODE(.type = blink_on);

	if (event_get_value(plc) == plc_standby_start)
		return BLINK_CODE(.type = blink_off);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_lan_bridge(struct led *led)
{
	if (event_get_value(access_type) != access_type_lan_bridge)
		return BLINK_CODE_SKIP;

	if (any_lan())
		return BLINK_CODE(.type = blink_on);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_disable_no_wlan(struct led *led)
{
	if (event_get_value(wlan) == wlan_off || 
		event_get_value(wlan) == wlan_error)
		return BLINK_CODE(.type = blink_off);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_lan(struct led *led)
{
	if (any_lan())
		return BLINK_CODE(.type = blink_on);

	return BLINK_CODE_SKIP;
}

/*-------------------------------------------------------------------*\
 * NEXUS-pairing fails on the first start after set factorydefaults, 
 * so we have to wait until the nexus-service is on start - JZ87268
\*-------------------------------------------------------------------*/
static struct blink_code overlay_nexus_not_ready(struct led *led)
{
	if (event_get_value(nexus) != nexus_unknown)
		return BLINK_CODE_SKIP;

	return BLINK_CODE(.type = blink_2HZ);
}

static struct blink_code overlay_nexus_not_ready_off(struct led *led)
{
	if (event_get_value(nexus) != nexus_unknown)
		return BLINK_CODE_SKIP;

	return BLINK_CODE(.type = blink_off);
}

static struct blink_code overlay_bootup(struct led *led)
{
	if (event_get_value(wlan) != wlan_unknown)
		return BLINK_CODE_SKIP;

	return BLINK_CODE(.type = blink_2HZ);
}

static struct blink_code overlay_bootup_slow(struct led *led)
{
	if (event_get_value(wlan) != wlan_unknown)
		return BLINK_CODE_SKIP;

	return BLINK_CODE(.type = blink_0_5HZ);
}

static struct blink_code overlay_wlan_repeater(struct led *led)
{
	enum wlan_sta_values wlan_station = event_get_value(wlan_sta);

	if (event_get_value(wlan_sta_base) != wlan_sta_base_configured &&
	    event_get_value(wlan) == wlan_on)
		return BLINK_CODE(.type = blink_0_5HZ);

	if (wlan_station == wlan_sta_register_failed ||
	    wlan_station == wlan_sta_starting ||
	    wlan_station == wlan_sta_stopping)
		return BLINK_CODE(.type = blink_off);

	if (wlan_station == wlan_sta_unregister)
		return BLINK_CODE(.type = blink_2HZ);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_wlan_uplink_ge_2(struct led *led)
{
	int level = get_wlan_rssi_level();

	if (event_get_value(access_type) != access_type_wlan_bridge)
		return BLINK_CODE_SKIP;

	if (event_get_value(wlan_sta_base) != wlan_sta_base_configured)
		return BLINK_CODE_SKIP;

	if (event_get_value(wlan) != wlan_on)
		return BLINK_CODE_SKIP;

	if (level < 0)
		return BLINK_CODE_SKIP;

	if (level >= 2)
		return BLINK_CODE(.type = blink_on);

	return BLINK_CODE_SKIP;
}

/*
 * This is only used for new style "one-led" repeater, for other repeaters
 * hardware_error=16 will result in slow blinking
 */
static struct blink_code overlay_factory_defaults(struct led *led)
{
	if (event_get_value(hardware_error) == 16)
		return BLINK_CODE(.type = blink_2HZ);
	if (event_get_value(device) == device_factory_defaults)
		return BLINK_CODE(.type = blink_off);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_update(struct led *led)
{
	if (event_get_value(update) == update_running)
		return BLINK_CODE(.type = blink_2HZ);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_update_off(struct led *led)
{
	if (event_get_value(update) == update_running)
		return BLINK_CODE(.type = blink_off);

	return BLINK_CODE_SKIP;
}

static bool skip_on_connect_events(struct led *led)
{
    // connect_pairing shows that a connect-button just pressed
    // for example wps triggered by the GUI results in connect_pairing == 0
	return (!check_connect_methode(led) && event_get_value(connect_pairing));
}

static struct blink_code overlay_wps_error(struct led *led)
{
	enum wps_values val = event_get_value(wps);

    // the WLAN-Led should not light up when the user has
	// pressed the Connect-button
    // if the user pressed the WLAN-button it should flash
    // if the user started wps on the webgui the led
    // should also flash
	if (skip_on_connect_events(led))
		return BLINK_CODE_SKIP;

	if (val == wps_error || val == wps_timeout ||
		val == wlan_sta_wps_error ||  val == wlan_sta_wps_timeout)
		return BLINK_CODE(.type = blink_4HZ);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_wps(struct led *led)
{
	enum wps_values val = event_get_value(wps);

    // the WLAN-Led should not light up when the user has
	// pressed the Connect-button
    // if the user pressed the WLAN-button it should flash
    // if the user started wps on the webgui the led
    // should also flash
	if (skip_on_connect_events(led))
		return BLINK_CODE_SKIP;

	if (val == wps_start || val == wlan_sta_wps_start)
		return BLINK_CODE(.type = blink_2HZ);

	if (val == wps_success || val == wlan_sta_wps_success)
		return BLINK_CODE(.type = blink_on);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_hardware_error(struct led *led)
{
	int val = event_get_value(hardware_error);

	if (val <= 0)
		return BLINK_CODE_SKIP;

	// Means factory defaults
	if (val == 16)
		return BLINK_CODE_SKIP;

	return BLINK_CODE(.type = blink_hardware_error, .params = { val, 0 });
}

static struct blink_code overlay_message_zentrale(struct led *led)
{
	switch (event_get_value(message_zentrale)) {
	case message_warning_high_priority:
	case message_warning_medium_priority:
	case message_warning_low_priority:
		/*
		 * Some puma platforms don't have a red colour led to signal
		 * errors. On them this error is signalled by fast blinking.
		 *
		 * Check if we have a non-white current colour defined. If not
		 * use this special case.
		 */
		if (led->current_color.red == 0xFF &&
		    led->current_color.green == 0xFF &&
		    led->current_color.blue == 0xFF)
			return BLINK_CODE(.type = blink_4HZ);
		else
			return BLINK_CODE(.type = blink_on);
	default:
		return BLINK_CODE_SKIP;
	}
}

static struct blink_code overlay_info_filesystem(struct led *led)
{
	if (event_get_value(filesystem) == filesystem_mount_failure)
		return BLINK_CODE(.type = blink_4HZ);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_display_suspend(struct led *led)
{
	/// display is simply enabled
	if (event_get_value(display) != display_suspend)
		return BLINK_CODE_SKIP;

	// We force the display on regardless
	if (event_get_value(display_force) == display_suspend_on_idle)
		return BLINK_CODE_SKIP;

	return BLINK_CODE(.type = blink_off);
}

static struct blink_code overlay_ignore_display_suspend_on_wan_disconnect(struct led *led)
{
	int dsl_status = event_get_value(dsl);
	int lte_status = event_get_value(lte);

	if (event_get_value(display_force) == display_suspend_on_idle)
		return BLINK_CODE_SKIP;

	if (event_get_value(display) != display_suspend)
		return BLINK_CODE_SKIP;

	if (event_get_value(ata) == ata_enable)
		return BLINK_CODE_SKIP;

	if (event_get_value(pppoe) == pppoe_on)
		return BLINK_CODE_SKIP;

	if (!dsl_status && !lte_status)
		return BLINK_CODE(.type = blink_1HZ);

	if ((dsl_status == dsl_verbunden) || (lte_status == lte_verbunden))
		return BLINK_CODE_SKIP;

	return BLINK_CODE(.type = blink_1HZ);
}

static struct blink_code overlay_power_state(struct led *led)
{
	// Turn if if explicitly requested, otherwise default to on
	if (event_get_value(power_state) == power_off)
		return BLINK_CODE(.type = blink_off);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_uplink_connecting(struct led *led)
{
	if (event_get_value(dsl) == dsl_training)
		return BLINK_CODE(.type = blink_2HZ_double);

	if (event_get_value(lte) == lte_suchen)
		return BLINK_CODE(.type = blink_2HZ_double);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_uplink_verbunden(struct led *led)
{
	if (event_get_value(dsl) == dsl_verbunden)
		return BLINK_CODE(.type = blink_on);

	if (event_get_value(lte) == lte_verbunden)
		return BLINK_CODE(.type = blink_on);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_ata_mode(struct led *led)
{
	if (event_get_value(ata) == ata_enable)
		return BLINK_CODE(.type = blink_on);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_wds_repeater(struct led *led)
{
	if (event_get_value(wlan_wds_repeater) == wlan_wds_repeater_enable)
		return BLINK_CODE(.type = blink_on);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_gsm_error(struct led *led)
{
	enum gsm_values val = event_get_value(gsm);

	if (val == gsm_sync_failed || val == gsm_isp_error ||
	    val == gsm_auth_failed)
		return BLINK_CODE(.type = blink_2HZ);

	if (val == gsm_syncing)
		return BLINK_CODE(.type = blink_1HZ);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_gsm(struct led *led)
{
	enum gsm_values val = event_get_value(gsm);

	if (val == gsm_off || val == gsm_unknown)
		return BLINK_CODE_SKIP;

	if (val == gsm_syncing)
		return BLINK_CODE(.type = blink_1HZ);

	return BLINK_CODE(.type = blink_on);
}

static struct blink_code overlay_wlan(struct led *led)
{
	switch (event_get_value(wlan)) {
	case wlan_on: {
		enum wlan_sta_values val = event_get_value(wlan_sta);

		if (val == wlan_sta_unregister ||
		    val == wlan_sta_register_failed)
			return BLINK_CODE(.type = blink_0_5HZ);

		return BLINK_CODE(.type = blink_on);
	}
	case wlan_error:
		return BLINK_CODE(.type = blink_4HZ);
	case wlan_starting:
	case wlan_configuring:
		return BLINK_CODE(.type = blink_1HZ);
	case wlan_dfs_starting:
		return BLINK_CODE(.type = blink_2HZ_double);
	case wlan_stopping:
		return BLINK_CODE(.type = blink_off);
	default:
		return BLINK_CODE_SKIP;
	}
}

static struct blink_code overlay_wlan_on(struct led *led)
{
	if (event_get_value(wlan) == wlan_on) 
		return BLINK_CODE(.type = blink_on);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_wlan_error(struct led *led)
{
	switch (event_get_value(wlan)) {
	case wlan_error:
		return BLINK_CODE(.type = blink_4HZ);
	default:
		return BLINK_CODE_SKIP;
	}
}

static struct blink_code overlay_wlan_rssi_bar_common(struct led *led)
{
	int level = event_get_value(wlan_rssi_level);
	enum wlan_sta_values sta = event_get_value(wlan_sta);

	// This led has no physical location
	if (led->options.location == 0)
		return BLINK_CODE_SKIP;

	if (event_get_value(wlan) != wlan_on)
		return BLINK_CODE_SKIP;

	// Can not do a bar without leds
	if (leds_max_location() == 0)
		return BLINK_CODE_SKIP;

	// We want to connect, but we are not ~> disconnected
	if (sta != wlan_sta_register && sta != wlan_sta_starting &&
	    sta != wlan_sta_stopping && sta != wlan_sta_unknown)
		return BLINK_CODE(.type = blink_0_5HZ);

	level = (level * (leds_max_location() + 1) / 100);

	if (level >= led->options.location)
		return BLINK_CODE(.type = blink_on);
	else
		return BLINK_CODE(.type = blink_off);
}

static struct blink_code overlay_wlan_rssi_bar_sta(struct led *led)
{
	if (event_get_value(access_type) != access_type_wlan_bridge)
		return BLINK_CODE_SKIP;

	if (event_get_value(wlan_sta_base) != wlan_sta_base_configured)
		return BLINK_CODE_SKIP;

	return overlay_wlan_rssi_bar_common(led);
}

static struct blink_code overlay_wlan_rssi_bar_client(struct led *led)
{
	if (event_get_value(access_type) != access_type_lan_bridge)
		return BLINK_CODE_SKIP;

	return overlay_wlan_rssi_bar_common(led);
}

static struct blink_code overlay_wlan_bridge_mode(struct led *led)
{
	if (event_get_value(access_type) == access_type_wlan_bridge)
		return BLINK_CODE(.type = blink_on);

	return BLINK_CODE_SKIP;
}

// after 30s we go from wlan lost to wlan failed
static struct blink_code overlay_disable_wlan_failed(struct led *led)
{
	enum wlan_sta_values sta = event_get_value(wlan_sta);

	if (event_get_value(wlan) != wlan_on)
		return BLINK_CODE_SKIP;

	if (event_get_value(access_type) != access_type_wlan_bridge)
		return BLINK_CODE_SKIP;

	if (event_get_value(wlan_sta_base) != wlan_sta_base_configured)
		return BLINK_CODE_SKIP;

	// Will be signaled by other led
	if (sta != wlan_sta_register && sta != wlan_sta_starting &&
	    sta != wlan_sta_stopping && sta != wlan_sta_unknown)
		return BLINK_CODE(.type = blink_off);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_info_klingelsperre(struct led *led)
{
	if (event_get_value(switch_info) != switch_info_to_klingelsperre_aktiv)
		return BLINK_CODE_SKIP;

	if (event_get_value(fon_info_klingelsperre) ==
	    fon_info_klingelsperre_aktiv)
		return BLINK_CODE(.type = blink_on);
	else
		return BLINK_CODE(.type = blink_off);
}

static struct blink_code overlay_info_tam_mwi(struct led *led)
{
	int info = event_get_value(switch_info);

	if (info != switch_info_to_tam_fax_missed_call &&
	    info != switch_info_to_tam_mwi)
		return BLINK_CODE_SKIP;

	if (event_get_value(fon_info_tam) == fon_info_tam_set_mwi)
		return BLINK_CODE(.type = blink_1HZ);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_info_fax_mwi(struct led *led)
{
	int info = event_get_value(switch_info);

	if (info != switch_info_to_tam_fax_missed_call &&
	    info != switch_info_to_fax_mwi)
		return BLINK_CODE_SKIP;

	if (event_get_value(fon_info_fax) == fon_info_fax_set_mwi)
		return BLINK_CODE(.type = blink_1HZ);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_info_missed_call(struct led *led)
{
	int info = event_get_value(switch_info);

	if (info != switch_info_to_tam_fax_missed_call &&
	    info != switch_info_to_missed_call)
		return BLINK_CODE_SKIP;

	if (event_get_value(fon_info_missed_call) == fon_info_missed_call_set)
		return BLINK_CODE(.type = blink_1HZ);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_info_voip_freecall(struct led *led)
{
	// For some reason this should be always signaled
	if (event_get_value(voip_info_freecall) == voip_info_freecall_start)
		return BLINK_CODE(.type = blink_on);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_dect_stick_and_surf(struct led *led)
{
	// the DECT-Led should not light up when the user has
	// pressed the Connect-button
    // if the user pressed the DECT-button it should flash
    // if the user started dect-stick&surf on the webgui the led
    // should also flash
	if (skip_on_connect_events(led))
		return BLINK_CODE_SKIP;

	switch (event_get_value(dect_stick_and_surf)) {
	case dect_stick_and_surf_start:
		return BLINK_CODE(.type = blink_2HZ);
	case dect_stick_and_surf_error:
		return BLINK_CODE(.type = blink_4HZ);
	case dect_stick_and_surf_success:
		return BLINK_CODE(.type = blink_on);
	default:
		return BLINK_CODE_SKIP;
	}
}

static struct blink_code overlay_usb_host_stick_and_surf(struct led *led)
{
	switch (event_get_value(usb_host_stick_and_surf)) {
	case usb_host_stick_and_surf_start:
		return BLINK_CODE(.type = blink_2HZ);
	case usb_host_stick_and_surf_error:
		return BLINK_CODE(.type = blink_4HZ);
	case usb_host_stick_and_surf_success:
		return BLINK_CODE(.type = blink_on);
	default:
		return BLINK_CODE_SKIP;
	}
}

static struct blink_code overlay_info_voip_srtp(struct led *led)
{
	if (event_get_value(switch_info) != switch_info_to_voip_srtp)
		return BLINK_CODE_SKIP;

	if (event_get_value(voip_srtp) == voip_srtp_active)
		return BLINK_CODE(.type = blink_2HZ);
	else
		return BLINK_CODE(.type = blink_off);
}

static struct blink_code overlay_info_dect(struct led *led)
{
	if (event_get_value(switch_info) != switch_info_to_dect)
		return BLINK_CODE_SKIP;

	if (event_get_value(dect) == dect_aktiv)
		return BLINK_CODE(.type = blink_on);
	else
		return BLINK_CODE(.type = blink_off);
}

static struct blink_code overlay_info_budget(struct led *led)
{
	if (event_get_value(switch_info) != switch_info_to_budget)
		return BLINK_CODE_SKIP;

	if (event_get_value(budget) == budget_reached)
		return BLINK_CODE(.type = blink_2HZ_double);
	else
		return BLINK_CODE(.type = blink_off);
}

static struct blink_code overlay_info_lan(struct led *led)
{
	if (event_get_value(switch_info) != switch_info_to_lan)
		return BLINK_CODE_SKIP;

	return overlay_lan(led);
}

static struct blink_code overlay_info_pppoe(struct led *led)
{
	if (event_get_value(switch_info) != switch_info_to_online)
		return BLINK_CODE_SKIP;

	if (event_get_value(pppoe) == pppoe_on)
		return BLINK_CODE(.type = blink_on);
	else
		return BLINK_CODE(.type = blink_off);
}

static struct blink_code overlay_info_wlan(struct led *led)
{
	if (event_get_value(switch_info) != switch_info_to_wlan_active)
		return BLINK_CODE_SKIP;

	if (event_get_value(wlan) == wlan_on)
		return BLINK_CODE(.type = blink_on);
	else
		return BLINK_CODE(.type = blink_off);
}

static struct blink_code overlay_info_wlan_guest(struct led *led)
{
	if (event_get_value(switch_info) != switch_info_to_wlan_guest_active)
		return BLINK_CODE_SKIP;

	if (event_get_value(wlan_guest) == wlan_guest_enabled)
		return BLINK_CODE(.type = blink_on);
	else
		return BLINK_CODE(.type = blink_off);
}

static struct blink_code overlay_info_wlan_guest_device(struct led *led)
{
	if (event_get_value(switch_info) != switch_info_to_wlan_guest_device)
		return BLINK_CODE_SKIP;

	if (event_get_value(wlan_guest_device) == wlan_guest_device_present)
		return BLINK_CODE(.type = blink_on);
	else
		return BLINK_CODE(.type = blink_off);
}

static struct blink_code overlay_info_usb_host(struct led *led)
{
	if (event_get_value(switch_info) != switch_info_to_usb_host)
		return BLINK_CODE_SKIP;

	switch (event_get_value(usb_host)) {
	case usb_host_connected:
		return BLINK_CODE(.type = blink_on);
	case usb_host_error:
		return BLINK_CODE(.type = blink_4HZ);
	default:
		return BLINK_CODE(.type = blink_off);
	}
}

static struct blink_code overlay_info_usb_client(struct led *led)
{
	if (event_get_value(switch_info) != switch_info_to_usb_client)
		return BLINK_CODE_SKIP;

	switch (event_get_value(usb_client)) {
	case usb_client_connected:
		return BLINK_CODE(.type = blink_on);
	case usb_client_error:
		return BLINK_CODE(.type = blink_4HZ);
	default:
		return BLINK_CODE(.type = blink_off);
	}
}

static struct blink_code overlay_wlan_macfilter_max(struct led *led)
{
	if (event_get_value(wlan_macfilter_max) != wlan_macfilter_max_reached)
		return BLINK_CODE_SKIP;

	return BLINK_CODE(.type = blink_2HZ_double);
}

static struct blink_code overlay_plc(struct led *led)
{
	if (event_get_value(plc) == plc_on)
		return BLINK_CODE(.type = blink_on);

	if (event_get_value(plc) == plc_low_phyrate)
		return BLINK_CODE(.type = blink_on);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_power_pppoe(struct led *led)
{
	if (event_get_value(pppoe) == pppoe_on)
		return BLINK_CODE(.type = blink_on);
	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_two_factor(struct led *led)
{
	if (event_get_value(two_factor) == two_factor_start)
		return BLINK_CODE(.type = blink_0_5HZ);

	if (event_get_value(two_factor) == two_factor_success)
		return BLINK_CODE(.type = blink_2HZ);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_voice_internet(struct led *led)
{
	if (event_get_value(internet) == internet_aufgebaut)
		return BLINK_CODE(.type = blink_on);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_voice_festnetz(struct led *led)
{
	if (event_get_value(festnetz) == festnetz_aufgebaut)
		return BLINK_CODE(.type = blink_on);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_voice_ab(struct led *led)
{
	if (event_get_value(ab) != 0)
		return BLINK_CODE(.type = blink_on);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_voice_mwi(struct led *led)
{
	if (event_get_value(voip_mwi) == voip_mwi_speech_msg)
		return BLINK_CODE(.type = blink_2HZ);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_dect_aktiv(struct led *led)
{
	if (event_get_value(dect) == dect_aktiv)
		return BLINK_CODE(.type = blink_on);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_zigbee_on(struct led *led)
{
	if (event_get_value(zigbee) == zigbee_aktiv)
		return BLINK_CODE(.type = blink_on);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_vu(struct led *led)
{
	int level = event_get_value(vu_level);
	bool dim = leds_all_dimmable();
	int steps_per_led;
	int step_min, step_max, step;

	// This led has no physical location
	if (led->options.location == 0)
		return BLINK_CODE_SKIP;

	if (level < 100 || level > 200)
		return BLINK_CODE_SKIP;

	// Can not a vu without leds
	if (leds_max_location() == 0)
		return BLINK_CODE_SKIP;

	if (event_get_value(lte_map_mode) == lte_map_mode_rssi)
		return BLINK_CODE_SKIP;

	/*
	 * Depending if all leds are dimmable we will use either 5 dim steps
	 * per led or use 2 steps where the middle step is blinking.
	 */
	if (dim)
		steps_per_led = 5;
	else
		steps_per_led = 2;

	// Move range to 0-100
	level -= 100;
	// Scale 0-200 onto 0-<num_steps>
	step = level * leds_max_location() * steps_per_led / 100;

	// Calculate the min step we respond on
	step_min = (led->options.location - 1) * steps_per_led + 1;
	// Calculate the max step we will be full on
	step_max = led->options.location * steps_per_led;

	if (step >= step_max)
		return BLINK_CODE(.type = blink_on);
	else if (dim && step >= step_min) {
		struct blink_code code = BLINK_CODE(.type = blink_on);

		code.color.brightness = (step - step_min + 1) * 255 / steps_per_led;

		return code;
	}
	else if (!dim && step >= step_min)
		return BLINK_CODE(.type = blink_4HZ);
	else
		return BLINK_CODE(.type = blink_off);
}

static struct blink_code overlay_vu_rssi(struct led *led)
{
	int level = event_get_value(vu_level);
	int steps_per_led;
	int step_min, step_max, step;
	int led_count;

	if (led->options.location == 3)
		return BLINK_CODE_SKIP;

	if (level < 100 || level > 200)
		return BLINK_CODE_SKIP;

	// Can not a vu without leds
	if (leds_max_location() == 0)
		return BLINK_CODE_SKIP;

	led_count = leds_max_location();
	steps_per_led = 2;

	// Move range to 0-100
	level -= 100;
	// Scale 0-200 onto 0-<num_steps>
	step = level * led_count * steps_per_led / 100;

	// Calculate the min step we respond on
	step_min = (led->options.location - 1) * steps_per_led + 1;
	// Calculate the max step we will be full on
	step_max = led->options.location * steps_per_led;

	if (step >= step_max || step >= step_min)
		return BLINK_CODE(.type = blink_on);
	else
		return BLINK_CODE(.type = blink_off);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_fb6820_vu_rssi(struct led *led)
{
	int level = event_get_value(vu_level);
	int steps_per_led;
	int step_min, step_max, step;
	int led_count;

	if (led->options.location < 3)
		return BLINK_CODE_SKIP;

	if (level < 100 || level > 200)
		return BLINK_CODE_SKIP;

	// Can not a vu without leds
	if (leds_max_location() == 0)
		return BLINK_CODE_SKIP;

	led_count = leds_max_location() - 2;
	steps_per_led = 2;

	// Move range to 0-100
	level -= 100;
	// Scale 0-200 onto 0-<num_steps>
	step = level * led_count * steps_per_led / 100;

	// Calculate the min step we respond on
	step_min = (led->options.location - 3) * steps_per_led + 1;
	// Calculate the max step we will be full on
	step_max = (led->options.location - 2) * steps_per_led;

	if (step >= step_max || step >= step_min)
		return BLINK_CODE(.type = blink_on);
	else
		return BLINK_CODE(.type = blink_off);

	return BLINK_CODE_SKIP;
}

static struct blink_code overlay_fb6820_update(struct led *led)
{
	/* take care on led location==3 only */

	if (led->options.location != 3)
		return BLINK_CODE_SKIP;

	if (event_get_value(update) == update_running) {
		return BLINK_CODE(.type = blink_2HZ);
	}

	return BLINK_CODE_SKIP;
}

struct led_type led_types[] = {
	{
		.name = "repeater-all-in-one",
		.options = {
			.connect_methods = CONNECT_METHODE_ALL,
			.flags = LED_FLAG_BARE_UPDATE,
		},
		.overlays = OVERLAYS(
			OVERLAY(set_current_color_error),
			OVERLAY(overlay_hardware_error),
			OVERLAY(set_current_color_normal),
			OVERLAY(overlay_update),
			OVERLAY(overlay_two_factor),
			OVERLAY(overlay_display_suspend),

			OVERLAY(overlay_bootup),
			OVERLAY(overlay_nexus_not_ready),
			OVERLAY(overlay_factory_defaults),
			OVERLAY(overlay_connect),

			OVERLAY(set_current_color_error),
			OVERLAY(overlay_connect_error),
			OVERLAY(overlay_wps_error),
			OVERLAY(overlay_wlan_error),

			OVERLAY(set_current_color_warn),
			OVERLAY(overlay_lan_bridge_no_cable),
			OVERLAY(overlay_wlan_bridge_no_uplink),
			OVERLAY(overlay_wlan_uplink_le_2),

			OVERLAY(set_current_color_normal),
			OVERLAY(overlay_wps),
			OVERLAY(overlay_lan_bridge),
			OVERLAY(overlay_disable_no_wlan),
			OVERLAY(overlay_wlan_repeater),
			OVERLAY(overlay_wlan_uplink_ge_2),

			OVERLAY(default_2hz),
		),
	},
	{
		// found on FR2400 and also on FP1260
		.name = "repeater-one-no-rssi",
		.options = {
			.connect_methods = CONNECT_METHODE_ALL,
			.flags = LED_FLAG_BARE_UPDATE,
		},
		.overlays = OVERLAYS(
			OVERLAY(set_current_color_error),
			OVERLAY(overlay_hardware_error),
			OVERLAY(set_current_color_normal),
			OVERLAY(overlay_update),
			OVERLAY(overlay_two_factor),
			OVERLAY(overlay_display_suspend),

			OVERLAY(overlay_bootup),
			OVERLAY(overlay_nexus_not_ready),
			OVERLAY(overlay_factory_defaults),
			OVERLAY(overlay_connect),

			OVERLAY(set_current_color_error),
			OVERLAY(overlay_connect_error),
			OVERLAY(overlay_wps_error),
			OVERLAY(overlay_wlan_error),

			OVERLAY(set_current_color_warn),
			OVERLAY(overlay_lan_bridge_no_cable),
			OVERLAY(overlay_wlan_bridge_no_uplink),
			OVERLAY(overlay_plc_low_phyrate),

			OVERLAY(set_current_color_normal),
			OVERLAY(overlay_wps),
			OVERLAY(overlay_lan_bridge),
			OVERLAY(overlay_plc_bridge),
			OVERLAY(overlay_disable_no_wlan),
			OVERLAY(overlay_wlan_repeater),
			OVERLAY(overlay_wlan_on),

			OVERLAY(default_2hz),
		),
	},
	{
		/*
		 * Copy for fr3000 only which has no orange on this led and therefore
		 * for odd reasons require the orange part for missing wlan to be shown
		 * on the rssi led.
		 *
		 * Oh man!
		 */
		.name = "repeater-one-fr3000",
		.options = {
			.connect_methods = CONNECT_METHODE_ALL,
			.flags = LED_FLAG_BARE_UPDATE,
		},
		.overlays = OVERLAYS(
			OVERLAY(set_current_color_error),
			OVERLAY(overlay_hardware_error),
			OVERLAY(set_current_color_normal),
			OVERLAY(overlay_update),
			OVERLAY(overlay_two_factor),
			OVERLAY(overlay_display_suspend),

			OVERLAY(overlay_bootup),
			OVERLAY(overlay_nexus_not_ready),
			OVERLAY(overlay_factory_defaults),
			OVERLAY(overlay_connect),

			OVERLAY(set_current_color_error),
			OVERLAY(overlay_connect_error),
			OVERLAY(overlay_wps_error),
			OVERLAY(overlay_wlan_error),

			OVERLAY(set_current_color_warn),
			OVERLAY(overlay_lan_bridge_no_cable),

			OVERLAY(set_current_color_normal),
			OVERLAY(overlay_wps),
			OVERLAY(overlay_lan_bridge),
			OVERLAY(overlay_disable_no_wlan),
			OVERLAY(overlay_wlan_repeater),

			OVERLAY(default_on),
		),
	},
	{
		.name = "repeater-rssi-color",
		.overlays = OVERLAYS(
			OVERLAY(overlay_two_factor),

			OVERLAY(overlay_display_suspend),

			OVERLAY(overlay_disable_no_wlan),
			OVERLAY(overlay_nexus_not_ready_off),

			OVERLAY(set_current_color_warn),
			OVERLAY(overlay_wlan_uplink_le_2),
			OVERLAY(overlay_wlan_bridge_no_uplink),
			OVERLAY(overlay_disable_wlan_failed),

			OVERLAY(set_current_color_normal),
			OVERLAY(overlay_lan_bridge),
			OVERLAY(overlay_wlan_uplink_ge_2),

			OVERLAY(default_off),
		),
	},
	{
		// found on FR1750e
		.name = "repeater-power",
		.options = {
			.flags = LED_FLAG_BARE_UPDATE,
		},
		.overlays = OVERLAYS(
			OVERLAY(overlay_update),
			OVERLAY(overlay_two_factor),
			OVERLAY(overlay_hardware_error),

			OVERLAY(overlay_display_suspend),
			OVERLAY(overlay_bootup_slow),

			OVERLAY(overlay_power_state),
			OVERLAY(default_on),
		),
	},
	{
		.name = "lan",
		.overlays = OVERLAYS(
			OVERLAY(overlay_two_factor),
			OVERLAY(overlay_hardware_error),
			OVERLAY(overlay_display_suspend),

			OVERLAY(overlay_lan),
			OVERLAY(default_off),
		),
	},
	{
		// found on FR1750e
		.name = "repeater-wlan",
		.options = {
			.connect_methods = CONNECT_METHODE_ALL,
		},
		.overlays = OVERLAYS(
			OVERLAY(overlay_two_factor),
			OVERLAY(overlay_hardware_error),
			OVERLAY(overlay_display_suspend),

			OVERLAY(overlay_nexus_not_ready),
			OVERLAY(overlay_connect),
			OVERLAY(overlay_wps_error),
			OVERLAY(overlay_wps),

			OVERLAY(overlay_wlan),
			OVERLAY(default_off),
		),
	},
	{
		// found on FP1260
		.name = "repeater-plc-wlan",
		.options = {
			.connect_methods = CONNECT_METHODE(4),
		},
		.overlays = OVERLAYS(
			OVERLAY(overlay_update_off),
			OVERLAY(overlay_hardware_error),
			OVERLAY(overlay_display_suspend),

			OVERLAY(overlay_nexus_not_ready_off),
			OVERLAY(overlay_connect),

			OVERLAY(overlay_wlan_on),
			OVERLAY(default_off),
		),
	},
	{
		.name = "repeater-plc",
		.options = {
			.flags = LED_FLAG_BARE_UPDATE,
		},
		.overlays = OVERLAYS(
			OVERLAY(overlay_update_off),
			OVERLAY(overlay_two_factor),
			OVERLAY(overlay_hardware_error),
			OVERLAY(overlay_display_suspend),

			OVERLAY(overlay_plc),
			OVERLAY(default_off),
		),
	},
	{
		.name = "box-power",
		.overlays = OVERLAYS(
			OVERLAY(set_current_color_normal),
			OVERLAY(overlay_gsm_error),

			OVERLAY(overlay_two_factor),
			OVERLAY(overlay_vu),
			OVERLAY(overlay_hardware_error),
			OVERLAY(overlay_ignore_display_suspend_on_wan_disconnect),
			OVERLAY(overlay_display_suspend),

			OVERLAY(overlay_power_state),

			OVERLAY(overlay_gsm),
			OVERLAY(overlay_wds_repeater),
			OVERLAY(overlay_power_pppoe),
			OVERLAY(overlay_ata_mode),

			OVERLAY(overlay_uplink_connecting),
			OVERLAY(overlay_uplink_verbunden),
			OVERLAY(default_0_5hz),
		),
	},
	{
		// used by FB7583
		.name = "box-internet",
		.overlays = OVERLAYS(
			OVERLAY(set_current_color_normal),

			OVERLAY(overlay_two_factor),
			OVERLAY(overlay_hardware_error),
			OVERLAY(overlay_display_suspend),

			OVERLAY(overlay_power_pppoe),

			OVERLAY(default_off),
		),
	},
	{
		// LED is blinking on connect-events
		.name = "box-wlan-connect",
		.options = {
			.connect_methods = CONNECT_METHODE_ALL,
		},
		.overlays = OVERLAYS(
			OVERLAY(set_current_color_normal),
			OVERLAY(overlay_two_factor),
			OVERLAY(overlay_vu),
			OVERLAY(overlay_hardware_error),
			OVERLAY(overlay_display_suspend),

			OVERLAY(overlay_connect),
			OVERLAY(overlay_connect_error),
			OVERLAY(overlay_wps_error),
			OVERLAY(overlay_wps),

			OVERLAY(overlay_wlan),
			OVERLAY(default_off),
		),
	},
	{
		// LED is NOT blinking on connect-events
		.name = "box-wlan",
		.options = {
			.connect_methods = CONNECT_METHODE(4),
		},
		.overlays = OVERLAYS(
			OVERLAY(set_current_color_normal),
			OVERLAY(overlay_two_factor),
			OVERLAY(overlay_vu),
			OVERLAY(overlay_hardware_error),
			OVERLAY(overlay_display_suspend),

			OVERLAY(overlay_connect),
			OVERLAY(overlay_wps_error),
			OVERLAY(overlay_wps),

			OVERLAY(overlay_wlan),
			OVERLAY(default_off),
		),
	},
	{
		// LED is blinking on connect-events
		.name = "box-fon-connect",
		.options = {
			.connect_methods = CONNECT_METHODE(1),
		},
		.overlays = OVERLAYS(
			OVERLAY(set_current_color_normal),
			OVERLAY(overlay_two_factor),
			OVERLAY(overlay_vu),
			OVERLAY(overlay_hardware_error),
			OVERLAY(overlay_display_suspend),

			OVERLAY(overlay_connect),
			OVERLAY(overlay_dect_stick_and_surf),

			OVERLAY(overlay_voice_internet),
			OVERLAY(overlay_voice_festnetz),
			OVERLAY(overlay_voice_ab),
			OVERLAY(overlay_voice_mwi),

			OVERLAY(default_off),
		),
	},
	{
		// LED must NOT blinking on all connect-events
		.name = "box-fon",
		.overlays = OVERLAYS(
			OVERLAY(set_current_color_normal),
			OVERLAY(overlay_two_factor),
			OVERLAY(overlay_vu),
			OVERLAY(overlay_hardware_error),
			OVERLAY(overlay_display_suspend),

			OVERLAY(overlay_voice_internet),
			OVERLAY(overlay_voice_festnetz),
			OVERLAY(overlay_voice_ab),
			OVERLAY(overlay_voice_mwi),

			OVERLAY(default_off),
		),
	},
	{
		// LED is NOT blinking on connect-events
		.name = "box-fon-dect",
		.overlays = OVERLAYS(
			OVERLAY(set_current_color_normal),
			OVERLAY(overlay_two_factor),
			OVERLAY(overlay_vu),
			OVERLAY(overlay_hardware_error),
			OVERLAY(overlay_display_suspend),

			OVERLAY(overlay_dect_stick_and_surf),

			OVERLAY(overlay_voice_internet),
			OVERLAY(overlay_voice_festnetz),
			OVERLAY(overlay_voice_ab),
			OVERLAY(overlay_voice_mwi),

			OVERLAY(default_off),
		),
	},
	{
		// LED is found on Cable-devices
		.name = "box-dect",
		.options = {
			.connect_methods = CONNECT_METHODE(1),
		},
		.overlays = OVERLAYS(
			OVERLAY(set_current_color_normal),
			OVERLAY(overlay_two_factor),
			OVERLAY(overlay_vu),
			OVERLAY(overlay_hardware_error),
			OVERLAY(overlay_display_suspend),

			OVERLAY(overlay_connect),
			OVERLAY(overlay_dect_stick_and_surf),
			OVERLAY(overlay_dect_aktiv),

			OVERLAY(default_off),
		),
	},
	{
		.name = "connect",
		.options = {
			.connect_methods = CONNECT_METHODE(1) | CONNECT_METHODE(2) | CONNECT_METHODE(5) | CONNECT_METHODE(6),
		},
		.overlays = OVERLAYS(
			OVERLAY(set_current_color_normal),
			OVERLAY(overlay_two_factor),
			OVERLAY(overlay_vu),
			OVERLAY(overlay_hardware_error),
			OVERLAY(overlay_display_suspend),

			OVERLAY(overlay_connect_error),
			OVERLAY(overlay_connect),

			OVERLAY(default_off),
		),
	},
	{
		// LED is blinking on connect-events
		.name = "info-connect",
		.options = {
			.connect_methods = CONNECT_METHODE(1),
			.flags = LED_FLAG_BARE_UPDATE,
		},
		.overlays = OVERLAYS(
			OVERLAY(set_current_color_normal),
			OVERLAY(overlay_update),
			OVERLAY(overlay_two_factor),
			OVERLAY(overlay_vu),
			OVERLAY(overlay_hardware_error),

			OVERLAY(set_current_color_error),
			OVERLAY(overlay_message_zentrale),

			OVERLAY(overlay_display_suspend),

			OVERLAY(overlay_info_filesystem),

			OVERLAY(set_current_color_normal),
			OVERLAY(overlay_usb_host_stick_and_surf),
			OVERLAY(overlay_info_voip_freecall),
			OVERLAY(overlay_dect_stick_and_surf),
			OVERLAY(overlay_wlan_macfilter_max),

			OVERLAY(overlay_connect),

			// The following overlays will only be active when they are enabled by
			// the switch_info call.

			OVERLAY(overlay_info_klingelsperre),
			OVERLAY(overlay_info_tam_mwi),
			OVERLAY(overlay_info_fax_mwi),
			OVERLAY(overlay_info_missed_call),

			OVERLAY(overlay_info_voip_srtp),

			OVERLAY(overlay_info_dect),

			OVERLAY(overlay_info_budget),

			OVERLAY(overlay_info_lan),
			OVERLAY(overlay_info_pppoe),

			OVERLAY(overlay_info_wlan),
			OVERLAY(overlay_info_wlan_guest),
			OVERLAY(overlay_info_wlan_guest_device),

			OVERLAY(overlay_info_usb_host),
			OVERLAY(overlay_info_usb_client),

			OVERLAY(default_off),
		),
	},
	{
		// LED is NOT blinking on connect-events
		.name = "info",
		.options = {
			.flags = LED_FLAG_BARE_UPDATE,
		},
		.overlays = OVERLAYS(
			OVERLAY(set_current_color_normal),
			OVERLAY(overlay_update),
			OVERLAY(overlay_two_factor),
			OVERLAY(overlay_vu),
			OVERLAY(overlay_hardware_error),

			OVERLAY(set_current_color_error),
			OVERLAY(overlay_message_zentrale),

			OVERLAY(overlay_display_suspend),

			OVERLAY(overlay_info_filesystem),

			OVERLAY(set_current_color_normal),
			OVERLAY(overlay_usb_host_stick_and_surf),
			OVERLAY(overlay_info_voip_freecall),
			OVERLAY(overlay_wlan_macfilter_max),

			// The following overlays will only be active when they are enabled by
			// the switch_info call.

			OVERLAY(overlay_info_klingelsperre),
			OVERLAY(overlay_info_tam_mwi),
			OVERLAY(overlay_info_fax_mwi),
			OVERLAY(overlay_info_missed_call),

			OVERLAY(overlay_info_voip_srtp),

			OVERLAY(overlay_info_dect),

			OVERLAY(overlay_info_budget),

			OVERLAY(overlay_info_lan),
			OVERLAY(overlay_info_pppoe),

			OVERLAY(overlay_info_wlan),
			OVERLAY(overlay_info_wlan_guest),
			OVERLAY(overlay_info_wlan_guest_device),

			OVERLAY(overlay_info_usb_host),
			OVERLAY(overlay_info_usb_client),

			OVERLAY(default_off),
		),
	},
	{
		// this INFO-LED should not flash on connect-events but
		// on dect_stick_and_surf events. this is used on boxes
		// without a FON/DECT LED to signal GUI related DECT events
		// this LED is found on a FB6690 and FB4060
		.name = "info-dect",
		.options = {
			.flags = LED_FLAG_BARE_UPDATE,
		},
		.overlays = OVERLAYS(
			OVERLAY(set_current_color_normal),
			OVERLAY(overlay_update),
			OVERLAY(overlay_two_factor),
			OVERLAY(overlay_vu),
			OVERLAY(overlay_hardware_error),

			OVERLAY(set_current_color_error),
			OVERLAY(overlay_message_zentrale),

			OVERLAY(overlay_display_suspend),

			OVERLAY(overlay_info_filesystem),

			OVERLAY(set_current_color_normal),
			OVERLAY(overlay_dect_stick_and_surf),
			OVERLAY(overlay_usb_host_stick_and_surf),
			OVERLAY(overlay_info_voip_freecall),
			OVERLAY(overlay_wlan_macfilter_max),

			// The following overlays will only be active when they are enabled by
			// the switch_info call.

			OVERLAY(overlay_info_klingelsperre),
			OVERLAY(overlay_info_tam_mwi),
			OVERLAY(overlay_info_fax_mwi),
			OVERLAY(overlay_info_missed_call),

			OVERLAY(overlay_info_voip_srtp),

			OVERLAY(overlay_info_dect),

			OVERLAY(overlay_info_budget),

			OVERLAY(overlay_info_lan),
			OVERLAY(overlay_info_pppoe),

			OVERLAY(overlay_info_wlan),
			OVERLAY(overlay_info_wlan_guest),
			OVERLAY(overlay_info_wlan_guest_device),

			OVERLAY(overlay_info_usb_host),
			OVERLAY(overlay_info_usb_client),

			OVERLAY(default_off),
		),
	},
	{
		.name = "uplink-rssi",
		.overlays = OVERLAYS(
			OVERLAY(set_current_color_normal),
			OVERLAY(overlay_two_factor),
			OVERLAY(overlay_hardware_error),

			OVERLAY(overlay_display_suspend),
			OVERLAY(overlay_nexus_not_ready_off),

			/*
			 * When no ap is configured, always turn off.
			 *
			 * Otherwise if lan uplink is available -> full
			 * Otherwise if wlan uplink -> show actual rssi
			 */
			OVERLAY(overlay_disable_no_wlan),
			OVERLAY(overlay_lan_bridge),
			OVERLAY(overlay_disable_wlan_failed),
			OVERLAY(overlay_wlan_rssi_bar_sta),

			OVERLAY(default_off),
		),
	},
	{
		.name = "wlan-rssi",
		.overlays = OVERLAYS(
			OVERLAY(set_current_color_normal),
			OVERLAY(overlay_two_factor),
			OVERLAY(overlay_hardware_error),

			OVERLAY(overlay_display_suspend),
			OVERLAY(overlay_nexus_not_ready_off),

			OVERLAY(overlay_wlan_rssi_bar_client),
			OVERLAY(overlay_wlan_rssi_bar_sta),

			OVERLAY(default_off),
		),
	},
	{
		.name = "fsg-dect",
		.overlays = OVERLAYS(
			OVERLAY(set_current_color_normal),
			OVERLAY(overlay_two_factor),
			OVERLAY(overlay_vu),
			OVERLAY(overlay_hardware_error),
			OVERLAY(overlay_display_suspend),

			OVERLAY(overlay_dect_aktiv),

			OVERLAY(default_off),
		),
	},
	{
		// LED is NOT blinking on connect-events
		.name = "fsg-wlan",
		.overlays = OVERLAYS(
			OVERLAY(set_current_color_normal),
			OVERLAY(overlay_two_factor),
			OVERLAY(overlay_hardware_error),
			OVERLAY(overlay_display_suspend),

			OVERLAY(overlay_wlan_bridge_mode),

			OVERLAY(default_off),
		),
	},
	{
		.name = "fsg-connect-rgy",
		.options = {
			.connect_methods = CONNECT_METHODE_ALL,
			.flags = LED_FLAG_BARE_UPDATE,
		},
		.overlays = OVERLAYS(
			OVERLAY(set_current_color_error),
			OVERLAY(overlay_hardware_error),
			OVERLAY(set_current_color_normal),
			OVERLAY(overlay_update),
			OVERLAY(overlay_two_factor),
			OVERLAY(overlay_display_suspend),

			OVERLAY(overlay_bootup),
			OVERLAY(overlay_nexus_not_ready),
			OVERLAY(overlay_factory_defaults),
			OVERLAY(overlay_connect),

			OVERLAY(set_current_color_error),
			OVERLAY(overlay_connect_error),
			OVERLAY(overlay_wps_error),
			OVERLAY(overlay_wlan_error),

			OVERLAY(set_current_color_warn),
			OVERLAY(overlay_lan_bridge_no_cable),
			OVERLAY(overlay_wlan_bridge_no_uplink),
			OVERLAY(overlay_wlan_uplink_le_2),

			OVERLAY(set_current_color_normal),
			OVERLAY(overlay_wps),
			OVERLAY(overlay_lan_bridge),
			OVERLAY(overlay_wlan_uplink_ge_2),

			OVERLAY(default_0_5hz),
		),
	},
	{
		.name = "zigbee",
		.overlays = OVERLAYS(
			OVERLAY(set_current_color_normal),
			OVERLAY(overlay_two_factor),
			OVERLAY(overlay_hardware_error),
			OVERLAY(overlay_display_suspend),

			OVERLAY(overlay_zigbee_on),

			OVERLAY(default_off),
		),
	},
	{
		.name = "default-on",
		.options = { 0 },
		.overlays = OVERLAYS(
			OVERLAY(overlay_display_suspend),
			OVERLAY(default_on),
		),
	},
	{
		.name = "unknown",
		.options = { 0 },
		.overlays = OVERLAYS(
			OVERLAY(default_4hz),
		),
	},
	{
		.name = "always-on",
		.options = { 0 },
		.overlays = OVERLAYS(
			OVERLAY(default_on),
		),
	},
	{
		.name = "always-off",
		.options = { 0 },
		.overlays = OVERLAYS(
			OVERLAY(default_off),
		),
	},
	{
		.name = "lte-rssi",
		.options = { 0 },
		.overlays = OVERLAYS(
			OVERLAY(set_current_color_normal),
			OVERLAY(overlay_hardware_error),
			OVERLAY(overlay_two_factor),
			OVERLAY(overlay_display_suspend),
			OVERLAY(overlay_vu_rssi),
			OVERLAY(default_off),
		),
	},
	{	/* fb6820 */
		.name = "lte-rssi_6820",
		.options = { 0 },	/*--- no need for any options ---*/
		.overlays = OVERLAYS(
			OVERLAY(set_current_color_normal),
			OVERLAY(overlay_hardware_error),
			OVERLAY(overlay_two_factor),
			OVERLAY(overlay_fb6820_update),
			OVERLAY(overlay_vu),
			OVERLAY(overlay_display_suspend),
			OVERLAY(overlay_fb6820_vu_rssi),
			OVERLAY(default_off),
		),
	}
};