* QPIC LCD node

Required properties:
- compatible:		"qti,mdss_qpic"
- reg:			QPIC LCD register address range
- clocks:		must contain core clock and always on clock
- clock-names:		must contain "core" for the core clock and "aon" for the
			always on clock
- dmas:			DMA specifier, consisting of a phandle BAM DMA
			controller node and the channel number to
			be used for LCD. Refer to dma.txt and
			qcom_bam_dma.txt for more details
Optional properties:
- qti,bam_timeout:	Timeout in ms for QPIC BAM transfer. Default timeout
			i.e. 400 ms will be used if this parameter is not
			present.

Example:

qti_mdss_qpic@7980000 {
	compatible = "qti,mdss_qpic";
	reg = <0x7980000 0x24000>;
	interrupts = <0 106 0>;
	clocks = <&gcc GCC_QPIC_CLK>, <&gcc GCC_QPIC_AHB_CLK>;
	clock-names = "core", "aon";
	dmas = <&qpic_bam 6>;
	qti,bam_timeout = <1000>;
};

* QPIC LCD Display Panel

Required properties:
- compatible:		"qti,mdss-qpic-panel"
- label:		QPIC LCD Panel Name
- qti,mdss-pan-res:	QPIC LCD Display Panel resolution in x,y
- qti,mdss-pan-bpp:	QPIC LCD Display Panel bits per pixel
- qti,refresh_rate:	QPIC LCD Display Panel refresh rate

Example:

qti_mdss_qpic_panel {
	compatible = "qti,mdss-qpic-panel";
	label = "qpic lcd panel";
	qti,mdss-pan-res = <800 480>;
	qti,mdss-pan-bpp = <18>;
	qti,refresh_rate = <60>;
	status = "disabled";
};