// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
 * IPQ9574 DB-AL02-C3 board device tree source
 *
 * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
 */

/dts-v1/;

#include "ipq9574-db-al02-c1.dts"

/ {
	#address-cells = <0x2>;
	#size-cells = <0x2>;
	model = "Qualcomm Technologies, Inc. IPQ9574/DB-AL02-C3";
	compatible = "qcom,ipq9574-db-al02-c3", "qcom,ipq9574-db-al02", "qcom,ipq9574";
	interrupt-parent = <&intc>;

	aliases {
		/delete-property/ serial1;
	};

	soc {
		pinctrl@1000000 {
			/delete-node/ QCC710_pins;

			sfp_pins: sfp_pinmux {
				sfp_rx {
					pins = "gpio46";
					function = "rx1";
					bias-disable;
				};

				sfp_tx {
					pins = "gpio61";
					function = "gpio";
					drive-strength = <8>;
					bias-pull-down;
					output-low;
                                };
                        };

			i2c_4_pins: i2c-4-pinmux {
				pins = "gpio50", "gpio51";
				function = "blsp4_i2c";
				drive-strength = <8>;
				bias-disable;
			};
		};

		blsp1_uart4: serial@78b3000 {
			/delete-property/ pinctrl-0;
			/delete-property/ pinctrl-names;
			status = "disabled";
		};

		dp5 {
			reg = <0x3a510000 0x4000>;
			qcom,mactype = <1>;
			qcom,phy-mdio-addr = <30>;
		};

		i2c_4: i2c@78b9000 {
			status = "ok";
			pinctrl-0 = <&i2c_4_pins>;
			pinctrl-names = "default";
                };

		mdio@90000 {
			/*gpio60 for malibu reset*/
			phy-reset-gpio = <&tlmm 60 0>;
			phy4: ethernet-phy@4 {
				compatible ="ethernet-phy-ieee802.3-c45";
				reg = <0>;
			};
			/delete-node/ ethernet-phy@5;
                };

		ess-instance {
			ess-switch@3a000000 {
				pinctrl-0 = <&sfp_pins>;
				pinctrl-names = "default";
				switch_mac_mode1 = <0xe>; /* mac mode for uniphy instance1*/
				qcom,port_phyinfo {
					port@4 {
						port_id = <5>;
						phy_address = <30>;
						/delete-property/port_mac_sel;
						media-type = "sfp"; /* fiber mode */
					};
				};
			};
		};
		/delete-node/ nss-macsec0;
	};
};