--- a/src/internal/asm.h	1970-01-01 01:00:00.000000000 +0100
+++ b/src/internal/asm.h	2019-11-22 13:27:47.954143351 +0100
@@ -0,0 +1,361 @@
+/*
+ * Copyright (c) 1996-2007 MIPS Technologies, Inc.
+ * Copyright (C) 2009 CodeSourcery, LLC.
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ *      * Redistributions of source code must retain the above copyright
+ *        notice, this list of conditions and the following disclaimer.
+ *      * Redistributions in binary form must reproduce the above
+ *      copyright
+ *        notice, this list of conditions and the following disclaimer
+ *        in the documentation and/or other materials provided with
+ *        the distribution.
+ *      * Neither the name of MIPS Technologies Inc. nor the names of its
+ *        contributors may be used to endorse or promote products derived
+ *        from this software without specific prior written permission.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * asm.h: various macros to help assembly language writers
+ */
+
+#ifndef _MIPS_ASM_H_
+#define _MIPS_ASM_H_
+
+/* ABI specific stack frame layout and manipulation. */
+#if _MIPS_SIM==_ABIO32 && ! __mips64
+/* Standard O32 */
+#define SZREG		4	/* saved register size */
+#define	REG_S		sw	/* store saved register */
+#define	REG_L		lw	/* load saved register */
+#define SZARG		4	/* argument register size */
+#define	NARGSAVE	4	/* arg register space on caller stack */
+#define ALSZ		7	/* stack alignment - 1 */
+#define ALMASK		(~7)	/* stack alignment mask */
+#define LOG2_STACK_ALGN	3	/* log2(8) */
+#define SZPTR		4	/* pointer size */
+#define LOG2_SZPTR	2	/* log2(4) */
+#define PTR_S		sw	/* store pointer */
+#define PTR_L		lw	/* load pointer */
+#define PTR_SUBU	subu	/* decrement pointer */
+#define PTR_ADDU	addu	/* increment pointer */
+#define PTR		.word	/* pointer type pseudo */                  
+#elif _MIPS_SIM==_ABIO32 && __mips64
+/* Algorithmics O32+64-bit */
+#define SZREG		8	/* saved register size */		   
+#define	REG_S		sd	/* store saved register */		   
+#define	REG_L		ld	/* load saved register */		   
+#define SZARG		4	/* argument register size */		   
+#define	NARGSAVE	4	/* arg register space on caller stack */   
+#define ALSZ		7	/* stack alignment - 1 */		   
+#define ALMASK		(~7)	/* stack alignment mask */		   
+#define LOG2_STACK_ALGN	3	/* log2(8) */
+#define SZPTR		4	/* pointer size */			   
+#define LOG2_SZPTR	2	/* log2(4) */
+#define PTR_S		sw	/* store pointer */			   
+#define PTR_L		lw	/* load pointer */			   
+#define PTR_SUBU	subu	/* decrement pointer */			   
+#define PTR_ADDU	addu	/* increment pointer */			   
+#define PTR		.word	/* pointer type pseudo */                  
+#elif _MIPS_SIM==_ABIO64
+/* Cygnus O64 */
+#define SZREG		8	/* saved register size */		   
+#define	REG_S		sd	/* store saved register */		   
+#define	REG_L		ld	/* load saved register */		   
+#define SZARG		8	/* argument register size */		   
+#define	NARGSAVE	4	/* arg register space on caller stack */   
+#define ALSZ		7	/* stack alignment - 1 */		   
+#define ALMASK		(~7)	/* stack alignment mask */		   
+#define LOG2_STACK_ALGN	3	/* log2(8) */
+#define SZPTR		4	/* pointer size */			   
+#define LOG2_SZPTR	2	/* log2(4) */
+#define PTR_S		sw	/* store pointer */			   
+#define PTR_L		lw	/* load pointer */			   
+#define PTR_SUBU	subu	/* decrement pointer */			   
+#define PTR_ADDU	addu	/* increment pointer */			   
+#define PTR		.word	/* pointer type pseudo */                  
+#elif _MIPS_SIM==_ABIN32
+/* Standard N32 */
+#define SZREG		8	/* saved register size */		   
+#define	REG_S		sd	/* store saved register */		   
+#define	REG_L		ld	/* load saved register */		   
+#define SZARG		8	/* argument register size */		   
+#define	NARGSAVE	0	/* arg register space on caller stack */   
+#define ALSZ		15	/* stack alignment - 1 */		   
+#define ALMASK		(~15)	/* stack alignment mask */		   
+#define LOG2_STACK_ALGN	4	/* log2(16) */
+#define SZPTR		4	/* pointer size */			   
+#define LOG2_SZPTR	2	/* log2(4) */
+#define PTR_S		sw	/* store pointer */			   
+#define PTR_L		lw	/* load pointer */			   
+#define PTR_SUBU	subu	/* decrement pointer (SGI uses sub) */
+#define PTR_ADDU	addu	/* increment pointer (SGI uses add) */
+#define PTR		.word	/* pointer type pseudo */                  
+#elif _MIPS_SIM==_ABI64
+/* Standard N64 */
+#define SZREG		8	/* saved register size */		   
+#define	REG_S		sd	/* store saved register */		   
+#define	REG_L		ld	/* load saved register */		   
+#define SZARG		8	/* argument register size */		   
+#define	NARGSAVE	0	/* arg register space on caller stack */   
+#define ALSZ		15	/* stack alignment - 1 */		   
+#define ALMASK		(~15)	/* stack alignment mask */		   
+#define LOG2_STACK_ALGN	4	/* log2(16) */
+#define SZPTR		8	/* pointer size */			   
+#define LOG2_SZPTR	3	/* log2(8) */
+#define PTR_S		sd	/* store pointer */			   
+#define PTR_L		ld	/* load pointer */			   
+#define PTR_SUBU	dsubu	/* decrement pointer */			   
+#define PTR_ADDU	daddu	/* increment pointer */			   
+#define PTR		.dword	/* pointer type pseudo */                  
+#else
+#error Unknown ABI
+#endif
+
+/* Concatenate two names. */
+#ifdef __STDC__
+# define _ASMCONCAT(A, B) A ## B
+#else
+# define _ASMCONCAT(A, B) A/**/B
+#endif
+
+/* Name of reset code section. */
+#ifndef _RESET_SECTION
+# define _RESET_SECTION .section .reset, "ax", @progbits
+#endif
+
+#ifndef _RESET_SECTION_NAMED
+/* No function section support for now, since binutils fails to cope with
+   external branches. */
+# define _RESET_SECTION_NAMED(name) .pushsection .reset, "ax", @progbits
+#endif
+
+/* Name of boot code section. */
+#ifndef _BOOT_SECTION
+# define _BOOT_SECTION .section .boot, "ax", @progbits
+#endif
+
+#ifndef _BOOT_SECTION_NAMED
+/* No function section support for now, since binutils fails to cope with
+   external branches. */
+# define _BOOT_SECTION_NAMED(name) .pushsection .boot, "ax", @progbits
+#endif
+
+/* Name of standard code section. */
+#ifndef _NORMAL_SECTION_UNNAMED
+# define _NORMAL_SECTION_UNNAMED .section .text, "ax", @progbits
+#endif
+
+#ifndef _NORMAL_SECTION_NAMED
+# ifdef _FUNCTION_SECTIONS_
+#  define _NORMAL_SECTION_NAMED(name) .pushsection .text ##.name, "ax", @progbits
+# else
+#  define _NORMAL_SECTION_NAMED(name) .pushsection .text, "ax", @progbits
+# endif
+#endif
+
+/* Default code section. */
+#ifndef _TEXT_SECTION_NAMED
+# if defined(_RESETCODE)
+#  define _TEXT_SECTION_NAMED _RESET_SECTION_NAMED
+# elif defined(_BOOTCODE)
+#  define _TEXT_SECTION_NAMED _BOOT_SECTION_NAMED
+# else
+#  define _TEXT_SECTION_NAMED _NORMAL_SECTION_NAMED
+# endif
+#endif
+
+#ifndef _TEXT_SECTION
+# if defined(_RESETCODE)
+#  define _TEXT_SECTION _RESET_SECTION
+# elif defined(_BOOTCODE)
+#  define _TEXT_SECTION _BOOT_SECTION
+# else
+#  define _TEXT_SECTION _NORMAL_SECTION_UNNAMED
+# endif
+	_TEXT_SECTION
+#endif
+
+/*
+ * Leaf functions declarations.
+ */
+
+/* Global leaf function. */
+#define LEAF(name) 			\
+  	_TEXT_SECTION_NAMED(name);	\
+  	.globl	name; 			\
+	.balign	4;			\
+  	.ent	name; 			\
+name:
+
+/* Static/Local leaf function. */
+#define SLEAF(name) 			\
+  	_TEXT_SECTION_NAMED(name);	\
+	.balign	4;			\
+  	.ent	name; 			\
+name:
+
+/* Weak leaf function. */
+#define WLEAF(name) 			\
+  	_TEXT_SECTION_NAMED(name);	\
+  	.weakext name; 			\
+	.balign	4;			\
+  	.ent	name; 			\
+name:
+
+/* Weak alias leaf function. */
+#define ALEAF(name,alias) 		\
+  	_TEXT_SECTION_NAMED(name);	\
+  	.weakext alias,name; 		\
+	.balign	4;			\
+  	.ent	name; 			\
+name:
+
+/*
+ * Alternative function entrypoints.
+ */
+
+/* Global alternative entrypoint. */
+#define AENT(name) 			\
+  	.globl	name; 			\
+	.balign	4;			\
+  	.aent	name; 			\
+name:
+#define XLEAF(name)	AENT(name)
+
+/* Local/static alternative entrypoint. */
+#define SAENT(name) 			\
+	.balign	4;			\
+  	.aent	name; 			\
+name:
+#define SXLEAF(name)	SAENT(name)
+
+
+/*
+ * Leaf functions declarations.
+ */
+
+/* Global nested function. */
+#define NESTED(name, framesz, rareg)	\
+  	_TEXT_SECTION_NAMED(name);	\
+  	.globl	name; 			\
+	.balign	4;			\
+  	.ent	name; 			\
+	.frame	sp, framesz, rareg;	\
+name:
+
+/* Static/Local nested function. */
+#define SNESTED(name, framesz, rareg)	\
+  	_TEXT_SECTION_NAMED(name);	\
+	.balign	4;			\
+  	.ent	name; 			\
+	.frame	sp, framesz, rareg;	\
+name:
+
+/* Weak nested function. */
+#define WNESTED(name, framesz, rareg)	\
+  	_TEXT_SECTION_NAMED(name);	\
+  	.weakext name; 			\
+	.balign	4;			\
+  	.ent	name; 			\
+	.frame	sp, framesz, rareg;	\
+name:
+
+/* Weak alias nested function. */
+#define ANESTED(name, alias, framesz, rareg) \
+  	_TEXT_SECTION_NAMED(name);	\
+    	.weakext alias, name;		\
+	.balign	4;			\
+  	.ent	name; 			\
+	.frame	sp, framesz, rareg;	\
+name:
+
+/*
+ * Function termination
+ */
+#define END(name) 			\
+  	.size name,.-name; 		\
+  	.end	name;			\
+	.popsection
+
+#define SEND(name)	END(name)
+#define WEND(name)	END(name)
+#define AEND(name,alias) END(name)
+
+/*
+ * Global data declaration.
+ */
+#define EXPORT(name) \
+  	.globl name; \
+  	.type name,@object; \
+name:
+
+/*
+ * Global data declaration with size.
+ */
+#define EXPORTS(name,sz) 		\
+  	.globl name; 			\
+  	.type name,@object; 		\
+  	.size name,sz; 			\
+name:
+
+/*
+ * Weak data declaration with size.
+ */
+#define WEXPORT(name,sz) 		\
+  	.weakext name; 			\
+  	.type name,@object; 		\
+  	.size name,sz; 			\
+name:
+
+/*
+ * Global data reference with size.
+ */
+#define	IMPORT(name, size) 		\
+	.extern	name,size
+
+/*
+ * Global zeroed data.
+ */
+#define BSS(name,size) 			\
+  	.type name,@object; 		\
+	.comm	name,size
+
+/*
+ * Local zeroed data.
+ */
+#define LBSS(name,size) 		\
+  	.lcomm	name,size
+
+/*
+ * Insert call to _mcount if profiling.
+ */
+#ifdef __PROFILING__
+#define _MCOUNT 			\
+	.set push; 			\
+	.set noat; 			\
+	move	$1,$31; 		\
+	jal	_mcount; 		\
+  	.set pop
+#else
+#define _MCOUNT
+#endif
+
+#endif
--- a/src/internal/regdef.h	1970-01-01 01:00:00.000000000 +0100
+++ b/src/internal/regdef.h	2019-11-22 13:23:23.377453320 +0100
@@ -0,0 +1,103 @@
+/*
+ * Copyright (c) 1996-2007 MIPS Technologies, Inc.
+ * Copyright (C) 2009 CodeSourcery, LLC.
+ * 
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ *      * Redistributions of source code must retain the above copyright
+ *        notice, this list of conditions and the following disclaimer.
+ *      * Redistributions in binary form must reproduce the above
+ *      copyright
+ *        notice, this list of conditions and the following disclaimer
+ *        in the documentation and/or other materials provided with
+ *        the distribution.
+ *      * Neither the name of MIPS Technologies Inc. nor the names of its
+ *        contributors may be used to endorse or promote products derived
+ *        from this software without specific prior written permission.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * regdef.h : MIPS Rx000 symbolic register names for assembler
+ */
+
+#ifndef _MIPS_REGDEF_H_
+#define _MIPS_REGDEF_H_
+
+#define zero	$0
+
+#define AT	$1
+
+#define v0 	$2
+#define v1	$3
+
+#define a0	$4
+#define a1	$5
+#define a2	$6
+#define	a3	$7
+
+#if _MIPS_SIM==_ABIN32 || _MIPS_SIM==_ABI64 || _MIPS_SIM==_ABIEABI
+#define a4	$8
+#define a5	$9
+#define a6	$10
+#define	a7	$11
+#define t0	$12
+#define t1	$13
+#define t2	$14
+#define t3	$15
+#define ta0	$8	/* alias for $a4 */
+#define ta1	$9	/* alias for $a5 */
+#define ta2	$10	/* alias for $a6 */
+#define ta3	$11	/* alias for $a7 */
+#else
+#define t0	$8
+#define t1	$9
+#define t2	$10
+#define t3	$11
+#define t4	$12
+#define t5	$13
+#define t6	$14
+#define t7	$15
+#define ta0	$12	/* alias for $t4 */
+#define ta1	$13	/* alias for $t5 */
+#define ta2	$14	/* alias for $t6 */
+#define ta3	$15	/* alias for $t7 */
+#endif
+
+#define s0	$16
+#define s1	$17
+#define s2	$18
+#define s3	$19
+#define s4	$20
+#define s5	$21
+#define s6	$22
+#define s7	$23
+#define s8	$30		/* == fp */
+
+#define t8	$24
+#define t9	$25
+#define k0	$26
+#define k1	$27
+
+#define gp	$28
+
+#define sp	$29
+#define fp	$30
+#define ra	$31
+
+#endif
--- a/src/string/mips/memcpy.S	1970-01-01 01:00:00.000000000 +0100
+++ b/src/string/mips/memcpy.S	2019-12-03 13:45:29.428807058 +0100
@@ -0,0 +1,886 @@
+/*
+ * Copyright (c) 2012-2015
+ *      MIPS Technologies, Inc., California.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the MIPS Technologies, Inc., nor the names of its
+ *    contributors may be used to endorse or promote products derived from
+ *    this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE MIPS TECHNOLOGIES, INC. ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE MIPS TECHNOLOGIES, INC. BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+
+#ifdef ANDROID_CHANGES
+# include "machine/asm.h"
+# include "machine/regdef.h"
+# define USE_MEMMOVE_FOR_OVERLAP
+# define PREFETCH_LOAD_HINT PREFETCH_HINT_LOAD_STREAMED
+# define PREFETCH_STORE_HINT PREFETCH_HINT_PREPAREFORSTORE
+#elif _LIBC
+# include <sysdep.h>
+# include <regdef.h>
+# include <sys/asm.h>
+# define PREFETCH_LOAD_HINT PREFETCH_HINT_LOAD_STREAMED
+# define PREFETCH_STORE_HINT PREFETCH_HINT_PREPAREFORSTORE
+#elif _COMPILING_NEWLIB
+# include "machine/asm.h"
+# include "machine/regdef.h"
+# define PREFETCH_LOAD_HINT PREFETCH_HINT_LOAD_STREAMED
+# define PREFETCH_STORE_HINT PREFETCH_HINT_PREPAREFORSTORE
+#else
+# include <regdef.h>
+# include <asm.h>
+#define DISABLE_PREFETCH
+#endif
+
+/* Check to see if the MIPS architecture we are compiling for supports
+ * prefetching.
+ */
+
+#if (__mips == 4) || (__mips == 5) || (__mips == 32) || (__mips == 64)
+# ifndef DISABLE_PREFETCH
+#  define USE_PREFETCH
+# endif
+#endif
+
+#if defined(_MIPS_SIM) && ((_MIPS_SIM == _ABI64) || (_MIPS_SIM == _ABIN32))
+# ifndef DISABLE_DOUBLE
+#  define USE_DOUBLE
+# endif
+#endif
+
+
+#if __mips_isa_rev > 5
+# if (PREFETCH_STORE_HINT == PREFETCH_HINT_PREPAREFORSTORE)
+#  undef PREFETCH_STORE_HINT
+#  define PREFETCH_STORE_HINT PREFETCH_HINT_STORE_STREAMED
+# endif
+# define R6_CODE
+#endif
+
+/* Some asm.h files do not have the L macro definition.  */
+#ifndef L
+# if _MIPS_SIM == _ABIO32
+#  define L(label) $L ## label
+# else
+#  define L(label) .L ## label
+# endif
+#endif
+
+/* Some asm.h files do not have the PTR_ADDIU macro definition.  */
+#ifndef PTR_ADDIU
+# ifdef USE_DOUBLE
+#  define PTR_ADDIU	daddiu
+# else
+#  define PTR_ADDIU	addiu
+# endif
+#endif
+
+/* Some asm.h files do not have the PTR_SRA macro definition.  */
+#ifndef PTR_SRA
+# ifdef USE_DOUBLE
+#  define PTR_SRA	dsra
+# else
+#  define PTR_SRA	sra
+# endif
+#endif
+
+/* New R6 instructions that may not be in asm.h.  */
+#ifndef PTR_LSA
+# if _MIPS_SIM == _ABI64
+#  define PTR_LSA	dlsa
+# else
+#  define PTR_LSA	lsa
+# endif
+#endif
+
+/*
+ * Using PREFETCH_HINT_LOAD_STREAMED instead of PREFETCH_LOAD on load
+ * prefetches appears to offer a slight preformance advantage.
+ *
+ * Using PREFETCH_HINT_PREPAREFORSTORE instead of PREFETCH_STORE
+ * or PREFETCH_STORE_STREAMED offers a large performance advantage
+ * but PREPAREFORSTORE has some special restrictions to consider.
+ *
+ * Prefetch with the 'prepare for store' hint does not copy a memory
+ * location into the cache, it just allocates a cache line and zeros
+ * it out.  This means that if you do not write to the entire cache
+ * line before writing it out to memory some data will get zero'ed out
+ * when the cache line is written back to memory and data will be lost.
+ *
+ * Also if you are using this memcpy to copy overlapping buffers it may
+ * not behave correctly when using the 'prepare for store' hint.  If you
+ * use the 'prepare for store' prefetch on a memory area that is in the
+ * memcpy source (as well as the memcpy destination), then you will get
+ * some data zero'ed out before you have a chance to read it and data will
+ * be lost.
+ *
+ * If you are going to use this memcpy routine with the 'prepare for store'
+ * prefetch you may want to set USE_MEMMOVE_FOR_OVERLAP in order to avoid
+ * the problem of running memcpy on overlapping buffers.
+ *
+ * There are ifdef'ed sections of this memcpy to make sure that it does not
+ * do prefetches on cache lines that are not going to be completely written.
+ * This code is only needed and only used when PREFETCH_STORE_HINT is set to
+ * PREFETCH_HINT_PREPAREFORSTORE.  This code assumes that cache lines are
+ * 32 bytes and if the cache line is larger it will not work correctly.
+ */
+
+#ifdef USE_PREFETCH
+# define PREFETCH_HINT_LOAD		0
+# define PREFETCH_HINT_STORE		1
+# define PREFETCH_HINT_LOAD_STREAMED	4
+# define PREFETCH_HINT_STORE_STREAMED	5
+# define PREFETCH_HINT_LOAD_RETAINED	6
+# define PREFETCH_HINT_STORE_RETAINED	7
+# define PREFETCH_HINT_WRITEBACK_INVAL	25
+# define PREFETCH_HINT_PREPAREFORSTORE	30
+
+/*
+ * If we have not picked out what hints to use at this point use the
+ * standard load and store prefetch hints.
+ */
+# ifndef PREFETCH_STORE_HINT
+#  define PREFETCH_STORE_HINT PREFETCH_HINT_STORE
+# endif
+# ifndef PREFETCH_LOAD_HINT
+#  define PREFETCH_LOAD_HINT PREFETCH_HINT_LOAD
+# endif
+
+/*
+ * We double everything when USE_DOUBLE is true so we do 2 prefetches to
+ * get 64 bytes in that case.  The assumption is that each individual
+ * prefetch brings in 32 bytes.
+ */
+
+# ifdef USE_DOUBLE
+#  define PREFETCH_CHUNK 64
+#  define PREFETCH_FOR_LOAD(chunk, reg) \
+ pref PREFETCH_LOAD_HINT, (chunk)*64(reg); \
+ pref PREFETCH_LOAD_HINT, ((chunk)*64)+32(reg)
+#  define PREFETCH_FOR_STORE(chunk, reg) \
+ pref PREFETCH_STORE_HINT, (chunk)*64(reg); \
+ pref PREFETCH_STORE_HINT, ((chunk)*64)+32(reg)
+# else
+#  define PREFETCH_CHUNK 32
+#  define PREFETCH_FOR_LOAD(chunk, reg) \
+ pref PREFETCH_LOAD_HINT, (chunk)*32(reg)
+#  define PREFETCH_FOR_STORE(chunk, reg) \
+ pref PREFETCH_STORE_HINT, (chunk)*32(reg)
+# endif
+/* MAX_PREFETCH_SIZE is the maximum size of a prefetch, it must not be less
+ * than PREFETCH_CHUNK, the assumed size of each prefetch.  If the real size
+ * of a prefetch is greater than MAX_PREFETCH_SIZE and the PREPAREFORSTORE
+ * hint is used, the code will not work correctly.  If PREPAREFORSTORE is not
+ * used then MAX_PREFETCH_SIZE does not matter.  */
+# define MAX_PREFETCH_SIZE 128
+/* PREFETCH_LIMIT is set based on the fact that we never use an offset greater
+ * than 5 on a STORE prefetch and that a single prefetch can never be larger
+ * than MAX_PREFETCH_SIZE.  We add the extra 32 when USE_DOUBLE is set because
+ * we actually do two prefetches in that case, one 32 bytes after the other.  */
+# ifdef USE_DOUBLE
+#  define PREFETCH_LIMIT (5 * PREFETCH_CHUNK) + 32 + MAX_PREFETCH_SIZE
+# else
+#  define PREFETCH_LIMIT (5 * PREFETCH_CHUNK) + MAX_PREFETCH_SIZE
+# endif
+# if (PREFETCH_STORE_HINT == PREFETCH_HINT_PREPAREFORSTORE) \
+    && ((PREFETCH_CHUNK * 4) < MAX_PREFETCH_SIZE)
+/* We cannot handle this because the initial prefetches may fetch bytes that
+ * are before the buffer being copied.  We start copies with an offset
+ * of 4 so avoid this situation when using PREPAREFORSTORE.  */
+#error "PREFETCH_CHUNK is too large and/or MAX_PREFETCH_SIZE is too small."
+# endif
+#else /* USE_PREFETCH not defined */
+# define PREFETCH_FOR_LOAD(offset, reg)
+# define PREFETCH_FOR_STORE(offset, reg)
+#endif
+
+/* Allow the routine to be named something else if desired.  */
+#ifndef MEMCPY_NAME
+# define MEMCPY_NAME memcpy
+#endif
+
+/* We use these 32/64 bit registers as temporaries to do the copying.  */
+#define REG0 t0
+#define REG1 t1
+#define REG2 t2
+#define REG3 t3
+#if defined(_MIPS_SIM) && (_MIPS_SIM == _ABIO32 || _MIPS_SIM == _ABIO64)
+# define REG4 t4
+# define REG5 t5
+# define REG6 t6
+# define REG7 t7
+#else
+# define REG4 ta0
+# define REG5 ta1
+# define REG6 ta2
+# define REG7 ta3
+#endif
+
+/* We load/store 64 bits at a time when USE_DOUBLE is true.
+ * The C_ prefix stands for CHUNK and is used to avoid macro name
+ * conflicts with system header files.  */
+
+#ifdef USE_DOUBLE
+# define C_ST	sd
+# define C_LD	ld
+# if __MIPSEB
+#  define C_LDHI	ldl	/* high part is left in big-endian	*/
+#  define C_STHI	sdl	/* high part is left in big-endian	*/
+#  define C_LDLO	ldr	/* low part is right in big-endian	*/
+#  define C_STLO	sdr	/* low part is right in big-endian	*/
+# else
+#  define C_LDHI	ldr	/* high part is right in little-endian	*/
+#  define C_STHI	sdr	/* high part is right in little-endian	*/
+#  define C_LDLO	ldl	/* low part is left in little-endian	*/
+#  define C_STLO	sdl	/* low part is left in little-endian	*/
+# endif
+# define C_ALIGN	dalign	/* r6 align instruction			*/
+#else
+# define C_ST	sw
+# define C_LD	lw
+# if __MIPSEB
+#  define C_LDHI	lwl	/* high part is left in big-endian	*/
+#  define C_STHI	swl	/* high part is left in big-endian	*/
+#  define C_LDLO	lwr	/* low part is right in big-endian	*/
+#  define C_STLO	swr	/* low part is right in big-endian	*/
+# else
+#  define C_LDHI	lwr	/* high part is right in little-endian	*/
+#  define C_STHI	swr	/* high part is right in little-endian	*/
+#  define C_LDLO	lwl	/* low part is left in little-endian	*/
+#  define C_STLO	swl	/* low part is left in little-endian	*/
+# endif
+# define C_ALIGN	align	/* r6 align instruction			*/
+#endif
+
+/* Bookkeeping values for 32 vs. 64 bit mode.  */
+#ifdef USE_DOUBLE
+# define NSIZE 8
+# define NSIZEMASK 0x3f
+# define NSIZEDMASK 0x7f
+#else
+# define NSIZE 4
+# define NSIZEMASK 0x1f
+# define NSIZEDMASK 0x3f
+#endif
+#define UNIT(unit) ((unit)*NSIZE)
+#define UNITM1(unit) (((unit)*NSIZE)-1)
+
+#ifdef ANDROID_CHANGES
+LEAF(MEMCPY_NAME, 0)
+#else
+LEAF(MEMCPY_NAME)
+#endif
+	.set	nomips16
+	.set	noreorder
+/*
+ * Below we handle the case where memcpy is called with overlapping src and dst.
+ * Although memcpy is not required to handle this case, some parts of Android
+ * like Skia rely on such usage. We call memmove to handle such cases.
+ */
+#ifdef USE_MEMMOVE_FOR_OVERLAP
+	PTR_SUBU t0,a0,a1
+	PTR_SRA	t2,t0,31
+	xor	t1,t0,t2
+	PTR_SUBU t0,t1,t2
+	sltu	t2,t0,a2
+	beq	t2,zero,L(memcpy)
+	la	t9,memmove
+	jr	t9
+	 nop
+L(memcpy):
+#endif
+/*
+ * If the size is less than 2*NSIZE (8 or 16), go to L(lastb).  Regardless of
+ * size, copy dst pointer to v0 for the return value.
+ */
+	slti	t2,a2,(2 * NSIZE)
+	bne	t2,zero,L(lasts)
+#if defined(RETURN_FIRST_PREFETCH) || defined(RETURN_LAST_PREFETCH)
+	move	v0,zero
+#else
+	move	v0,a0
+#endif
+
+#ifndef R6_CODE
+
+/*
+ * If src and dst have different alignments, go to L(unaligned), if they
+ * have the same alignment (but are not actually aligned) do a partial
+ * load/store to make them aligned.  If they are both already aligned
+ * we can start copying at L(aligned).
+ */
+	xor	t8,a1,a0
+	andi	t8,t8,(NSIZE-1)		/* t8 is a0/a1 word-displacement */
+	bne	t8,zero,L(unaligned)
+	PTR_SUBU a3, zero, a0
+
+	andi	a3,a3,(NSIZE-1)		/* copy a3 bytes to align a0/a1	  */
+	beq	a3,zero,L(aligned)	/* if a3=0, it is already aligned */
+	PTR_SUBU a2,a2,a3		/* a2 is the remining bytes count */
+
+	C_LDHI	t8,0(a1)
+	PTR_ADDU a1,a1,a3
+	C_STHI	t8,0(a0)
+	PTR_ADDU a0,a0,a3
+
+#else /* R6_CODE */
+
+/*
+ * Align the destination and hope that the source gets aligned too.  If it
+ * doesn't we jump to L(r6_unaligned*) to do unaligned copies using the r6
+ * align instruction.
+ */
+	andi	t8,a0,7
+	lapc	t9,L(atable)
+	PTR_LSA	t9,t8,t9,2
+	jrc	t9
+L(atable):
+	bc	L(lb0)
+	bc	L(lb7)
+	bc	L(lb6)
+	bc	L(lb5)
+	bc	L(lb4)
+	bc	L(lb3)
+	bc	L(lb2)
+	bc	L(lb1)
+L(lb7):
+	lb	a3, 6(a1)
+	sb	a3, 6(a0)
+L(lb6):
+	lb	a3, 5(a1)
+	sb	a3, 5(a0)
+L(lb5):
+	lb	a3, 4(a1)
+	sb	a3, 4(a0)
+L(lb4):
+	lb	a3, 3(a1)
+	sb	a3, 3(a0)
+L(lb3):
+	lb	a3, 2(a1)
+	sb	a3, 2(a0)
+L(lb2):
+	lb	a3, 1(a1)
+	sb	a3, 1(a0)
+L(lb1):
+	lb	a3, 0(a1)
+	sb	a3, 0(a0)
+
+	li	t9,8
+	subu	t8,t9,t8
+	PTR_SUBU a2,a2,t8
+	PTR_ADDU a0,a0,t8
+	PTR_ADDU a1,a1,t8
+L(lb0):
+
+	andi	t8,a1,(NSIZE-1)
+	lapc	t9,L(jtable)
+	PTR_LSA	t9,t8,t9,2
+	jrc	t9
+L(jtable):
+	bc	L(aligned)
+	bc	L(r6_unaligned1)
+	bc	L(r6_unaligned2)
+	bc	L(r6_unaligned3)
+# ifdef USE_DOUBLE
+	bc	L(r6_unaligned4)
+	bc	L(r6_unaligned5)
+	bc	L(r6_unaligned6)
+	bc	L(r6_unaligned7)
+# endif
+#endif /* R6_CODE */
+
+L(aligned):
+
+/*
+ * Now dst/src are both aligned to (word or double word) aligned addresses
+ * Set a2 to count how many bytes we have to copy after all the 64/128 byte
+ * chunks are copied and a3 to the dst pointer after all the 64/128 byte
+ * chunks have been copied.  We will loop, incrementing a0 and a1 until a0
+ * equals a3.
+ */
+
+	andi	t8,a2,NSIZEDMASK /* any whole 64-byte/128-byte chunks? */
+	beq	a2,t8,L(chkw)	 /* if a2==t8, no 64-byte/128-byte chunks */
+	PTR_SUBU a3,a2,t8	 /* subtract from a2 the reminder */
+	PTR_ADDU a3,a0,a3	 /* Now a3 is the final dst after loop */
+
+/* When in the loop we may prefetch with the 'prepare to store' hint,
+ * in this case the a0+x should not be past the "t0-32" address.  This
+ * means: for x=128 the last "safe" a0 address is "t0-160".  Alternatively,
+ * for x=64 the last "safe" a0 address is "t0-96" In the current version we
+ * will use "prefetch hint,128(a0)", so "t0-160" is the limit.
+ */
+#if defined(USE_PREFETCH) && (PREFETCH_STORE_HINT == PREFETCH_HINT_PREPAREFORSTORE)
+	PTR_ADDU t0,a0,a2		/* t0 is the "past the end" address */
+	PTR_SUBU t9,t0,PREFETCH_LIMIT	/* t9 is the "last safe pref" address */
+#endif
+	PREFETCH_FOR_LOAD  (0, a1)
+	PREFETCH_FOR_LOAD  (1, a1)
+	PREFETCH_FOR_LOAD  (2, a1)
+	PREFETCH_FOR_LOAD  (3, a1)
+#if defined(USE_PREFETCH) && (PREFETCH_STORE_HINT != PREFETCH_HINT_PREPAREFORSTORE)
+	PREFETCH_FOR_STORE (1, a0)
+	PREFETCH_FOR_STORE (2, a0)
+	PREFETCH_FOR_STORE (3, a0)
+#endif
+#if defined(RETURN_FIRST_PREFETCH) && defined(USE_PREFETCH)
+# if PREFETCH_STORE_HINT == PREFETCH_HINT_PREPAREFORSTORE
+	sltu    v1,t9,a0
+	bgtz    v1,L(skip_set)
+	nop
+	PTR_ADDIU v0,a0,(PREFETCH_CHUNK*4)
+L(skip_set):
+# else
+	PTR_ADDIU v0,a0,(PREFETCH_CHUNK*1)
+# endif
+#endif
+#if defined(RETURN_LAST_PREFETCH) && defined(USE_PREFETCH) \
+    && (PREFETCH_STORE_HINT != PREFETCH_HINT_PREPAREFORSTORE)
+	PTR_ADDIU v0,a0,(PREFETCH_CHUNK*3)
+# ifdef USE_DOUBLE
+	PTR_ADDIU v0,v0,32
+# endif
+#endif
+L(loop16w):
+	C_LD	t0,UNIT(0)(a1)
+#if defined(USE_PREFETCH) && (PREFETCH_STORE_HINT == PREFETCH_HINT_PREPAREFORSTORE)
+	sltu	v1,t9,a0		/* If a0 > t9 don't use next prefetch */
+	bgtz	v1,L(skip_pref)
+#endif
+	C_LD	t1,UNIT(1)(a1)
+#ifndef R6_CODE
+	PREFETCH_FOR_STORE (4, a0)
+	PREFETCH_FOR_STORE (5, a0)
+#else
+	PREFETCH_FOR_STORE (2, a0)
+#endif
+#if defined(RETURN_LAST_PREFETCH) && defined(USE_PREFETCH)
+	PTR_ADDIU v0,a0,(PREFETCH_CHUNK*5)
+# ifdef USE_DOUBLE
+	PTR_ADDIU v0,v0,32
+# endif
+#endif
+L(skip_pref):
+	C_LD	REG2,UNIT(2)(a1)
+	C_LD	REG3,UNIT(3)(a1)
+	C_LD	REG4,UNIT(4)(a1)
+	C_LD	REG5,UNIT(5)(a1)
+	C_LD	REG6,UNIT(6)(a1)
+	C_LD	REG7,UNIT(7)(a1)
+#ifndef R6_CODE
+	PREFETCH_FOR_LOAD (4, a1)
+#else
+	PREFETCH_FOR_LOAD (3, a1)
+#endif
+	C_ST	t0,UNIT(0)(a0)
+	C_ST	t1,UNIT(1)(a0)
+	C_ST	REG2,UNIT(2)(a0)
+	C_ST	REG3,UNIT(3)(a0)
+	C_ST	REG4,UNIT(4)(a0)
+	C_ST	REG5,UNIT(5)(a0)
+	C_ST	REG6,UNIT(6)(a0)
+	C_ST	REG7,UNIT(7)(a0)
+
+	C_LD	t0,UNIT(8)(a1)
+	C_LD	t1,UNIT(9)(a1)
+	C_LD	REG2,UNIT(10)(a1)
+	C_LD	REG3,UNIT(11)(a1)
+	C_LD	REG4,UNIT(12)(a1)
+	C_LD	REG5,UNIT(13)(a1)
+	C_LD	REG6,UNIT(14)(a1)
+	C_LD	REG7,UNIT(15)(a1)
+#ifndef R6_CODE
+	PREFETCH_FOR_LOAD (5, a1)
+#endif
+	C_ST	t0,UNIT(8)(a0)
+	C_ST	t1,UNIT(9)(a0)
+	C_ST	REG2,UNIT(10)(a0)
+	C_ST	REG3,UNIT(11)(a0)
+	C_ST	REG4,UNIT(12)(a0)
+	C_ST	REG5,UNIT(13)(a0)
+	C_ST	REG6,UNIT(14)(a0)
+	C_ST	REG7,UNIT(15)(a0)
+	PTR_ADDIU a0,a0,UNIT(16)	/* adding 64/128 to dest */
+	bne	a0,a3,L(loop16w)
+	PTR_ADDIU a1,a1,UNIT(16)	/* adding 64/128 to src */
+	move	a2,t8
+
+/* Here we have src and dest word-aligned but less than 64-bytes or
+ * 128 bytes to go.  Check for a 32(64) byte chunk and copy if if there
+ * is one.  Otherwise jump down to L(chk1w) to handle the tail end of
+ * the copy.
+ */
+
+L(chkw):
+	PREFETCH_FOR_LOAD (0, a1)
+	andi	t8,a2,NSIZEMASK	/* Is there a 32-byte/64-byte chunk.  */
+				/* The t8 is the reminder count past 32-bytes */
+	beq	a2,t8,L(chk1w)	/* When a2=t8, no 32-byte chunk  */
+	nop
+	C_LD	t0,UNIT(0)(a1)
+	C_LD	t1,UNIT(1)(a1)
+	C_LD	REG2,UNIT(2)(a1)
+	C_LD	REG3,UNIT(3)(a1)
+	C_LD	REG4,UNIT(4)(a1)
+	C_LD	REG5,UNIT(5)(a1)
+	C_LD	REG6,UNIT(6)(a1)
+	C_LD	REG7,UNIT(7)(a1)
+	PTR_ADDIU a1,a1,UNIT(8)
+	C_ST	t0,UNIT(0)(a0)
+	C_ST	t1,UNIT(1)(a0)
+	C_ST	REG2,UNIT(2)(a0)
+	C_ST	REG3,UNIT(3)(a0)
+	C_ST	REG4,UNIT(4)(a0)
+	C_ST	REG5,UNIT(5)(a0)
+	C_ST	REG6,UNIT(6)(a0)
+	C_ST	REG7,UNIT(7)(a0)
+	PTR_ADDIU a0,a0,UNIT(8)
+
+/*
+ * Here we have less than 32(64) bytes to copy.  Set up for a loop to
+ * copy one word (or double word) at a time.  Set a2 to count how many
+ * bytes we have to copy after all the word (or double word) chunks are
+ * copied and a3 to the dst pointer after all the (d)word chunks have
+ * been copied.  We will loop, incrementing a0 and a1 until a0 equals a3.
+ */
+L(chk1w):
+	andi	a2,t8,(NSIZE-1)	/* a2 is the reminder past one (d)word chunks */
+	beq	a2,t8,L(lastw)
+	PTR_SUBU a3,t8,a2	/* a3 is count of bytes in one (d)word chunks */
+	PTR_ADDU a3,a0,a3	/* a3 is the dst address after loop */
+
+/* copying in words (4-byte or 8-byte chunks) */
+L(wordCopy_loop):
+	C_LD	REG3,UNIT(0)(a1)
+	PTR_ADDIU a0,a0,UNIT(1)
+	PTR_ADDIU a1,a1,UNIT(1)
+	bne	a0,a3,L(wordCopy_loop)
+	C_ST	REG3,UNIT(-1)(a0)
+
+/* If we have been copying double words, see if we can copy a single word
+   before doing byte copies.  We can have, at most, one word to copy.  */
+
+L(lastw):
+#ifdef USE_DOUBLE
+	andi    t8,a2,3		/* a2 is the remainder past 4 byte chunks.  */
+	beq	t8,a2,L(lastb)
+	move	a2,t8
+	lw	REG3,0(a1)
+	sw	REG3,0(a0)
+	PTR_ADDIU a0,a0,4
+	PTR_ADDIU a1,a1,4
+#endif
+
+/* Copy the last 8 (or 16) bytes */
+L(lastb):
+	blez	a2,L(leave)
+	PTR_ADDU a3,a0,a2	/* a3 is the last dst address */
+L(lastbloop):
+	lb	v1,0(a1)
+	PTR_ADDIU a0,a0,1
+	PTR_ADDIU a1,a1,1
+	bne	a0,a3,L(lastbloop)
+	sb	v1,-1(a0)
+L(leave):
+	j	ra
+	nop
+
+/* We jump here with a memcpy of less than 8 or 16 bytes, depending on
+   whether or not USE_DOUBLE is defined.  Instead of just doing byte
+   copies, check the alignment and size and use lw/sw if possible.
+   Otherwise, do byte copies.  */
+
+L(lasts):
+	andi	t8,a2,3
+	beq	t8,a2,L(lastb)
+
+	andi	t9,a0,3
+	bne	t9,zero,L(lastb)
+	andi	t9,a1,3
+	bne	t9,zero,L(lastb)
+
+	PTR_SUBU a3,a2,t8
+	PTR_ADDU a3,a0,a3
+
+L(wcopy_loop):
+	lw	REG3,0(a1)
+	PTR_ADDIU a0,a0,4
+	PTR_ADDIU a1,a1,4
+	bne	a0,a3,L(wcopy_loop)
+	sw	REG3,-4(a0)
+
+	b	L(lastb)
+	move	a2,t8
+
+#ifndef R6_CODE
+/*
+ * UNALIGNED case, got here with a3 = "negu a0"
+ * This code is nearly identical to the aligned code above
+ * but only the destination (not the source) gets aligned
+ * so we need to do partial loads of the source followed
+ * by normal stores to the destination (once we have aligned
+ * the destination).
+ */
+
+L(unaligned):
+	andi	a3,a3,(NSIZE-1)	/* copy a3 bytes to align a0/a1 */
+	beqz	a3,L(ua_chk16w) /* if a3=0, it is already aligned */
+	PTR_SUBU a2,a2,a3	/* a2 is the remining bytes count */
+
+	C_LDHI	v1,UNIT(0)(a1)
+	C_LDLO	v1,UNITM1(1)(a1)
+	PTR_ADDU a1,a1,a3
+	C_STHI	v1,UNIT(0)(a0)
+	PTR_ADDU a0,a0,a3
+
+/*
+ *  Now the destination (but not the source) is aligned
+ * Set a2 to count how many bytes we have to copy after all the 64/128 byte
+ * chunks are copied and a3 to the dst pointer after all the 64/128 byte
+ * chunks have been copied.  We will loop, incrementing a0 and a1 until a0
+ * equals a3.
+ */
+
+L(ua_chk16w):
+	andi	t8,a2,NSIZEDMASK /* any whole 64-byte/128-byte chunks? */
+	beq	a2,t8,L(ua_chkw) /* if a2==t8, no 64-byte/128-byte chunks */
+	PTR_SUBU a3,a2,t8	 /* subtract from a2 the reminder */
+	PTR_ADDU a3,a0,a3	 /* Now a3 is the final dst after loop */
+
+# if defined(USE_PREFETCH) && (PREFETCH_STORE_HINT == PREFETCH_HINT_PREPAREFORSTORE)
+	PTR_ADDU t0,a0,a2	  /* t0 is the "past the end" address */
+	PTR_SUBU t9,t0,PREFETCH_LIMIT /* t9 is the "last safe pref" address */
+# endif
+	PREFETCH_FOR_LOAD  (0, a1)
+	PREFETCH_FOR_LOAD  (1, a1)
+	PREFETCH_FOR_LOAD  (2, a1)
+# if defined(USE_PREFETCH) && (PREFETCH_STORE_HINT != PREFETCH_HINT_PREPAREFORSTORE)
+	PREFETCH_FOR_STORE (1, a0)
+	PREFETCH_FOR_STORE (2, a0)
+	PREFETCH_FOR_STORE (3, a0)
+# endif
+# if defined(RETURN_FIRST_PREFETCH) && defined(USE_PREFETCH)
+#  if (PREFETCH_STORE_HINT == PREFETCH_HINT_PREPAREFORSTORE)
+	sltu    v1,t9,a0
+	bgtz    v1,L(ua_skip_set)
+	nop
+	PTR_ADDIU v0,a0,(PREFETCH_CHUNK*4)
+L(ua_skip_set):
+#  else
+	PTR_ADDIU v0,a0,(PREFETCH_CHUNK*1)
+#  endif
+# endif
+L(ua_loop16w):
+	PREFETCH_FOR_LOAD  (3, a1)
+	C_LDHI	t0,UNIT(0)(a1)
+	C_LDHI	t1,UNIT(1)(a1)
+	C_LDHI	REG2,UNIT(2)(a1)
+# if defined(USE_PREFETCH) && (PREFETCH_STORE_HINT == PREFETCH_HINT_PREPAREFORSTORE)
+	sltu	v1,t9,a0
+	bgtz	v1,L(ua_skip_pref)
+# endif
+	C_LDHI	REG3,UNIT(3)(a1)
+	PREFETCH_FOR_STORE (4, a0)
+	PREFETCH_FOR_STORE (5, a0)
+L(ua_skip_pref):
+	C_LDHI	REG4,UNIT(4)(a1)
+	C_LDHI	REG5,UNIT(5)(a1)
+	C_LDHI	REG6,UNIT(6)(a1)
+	C_LDHI	REG7,UNIT(7)(a1)
+	C_LDLO	t0,UNITM1(1)(a1)
+	C_LDLO	t1,UNITM1(2)(a1)
+	C_LDLO	REG2,UNITM1(3)(a1)
+	C_LDLO	REG3,UNITM1(4)(a1)
+	C_LDLO	REG4,UNITM1(5)(a1)
+	C_LDLO	REG5,UNITM1(6)(a1)
+	C_LDLO	REG6,UNITM1(7)(a1)
+	C_LDLO	REG7,UNITM1(8)(a1)
+        PREFETCH_FOR_LOAD (4, a1)
+	C_ST	t0,UNIT(0)(a0)
+	C_ST	t1,UNIT(1)(a0)
+	C_ST	REG2,UNIT(2)(a0)
+	C_ST	REG3,UNIT(3)(a0)
+	C_ST	REG4,UNIT(4)(a0)
+	C_ST	REG5,UNIT(5)(a0)
+	C_ST	REG6,UNIT(6)(a0)
+	C_ST	REG7,UNIT(7)(a0)
+	C_LDHI	t0,UNIT(8)(a1)
+	C_LDHI	t1,UNIT(9)(a1)
+	C_LDHI	REG2,UNIT(10)(a1)
+	C_LDHI	REG3,UNIT(11)(a1)
+	C_LDHI	REG4,UNIT(12)(a1)
+	C_LDHI	REG5,UNIT(13)(a1)
+	C_LDHI	REG6,UNIT(14)(a1)
+	C_LDHI	REG7,UNIT(15)(a1)
+	C_LDLO	t0,UNITM1(9)(a1)
+	C_LDLO	t1,UNITM1(10)(a1)
+	C_LDLO	REG2,UNITM1(11)(a1)
+	C_LDLO	REG3,UNITM1(12)(a1)
+	C_LDLO	REG4,UNITM1(13)(a1)
+	C_LDLO	REG5,UNITM1(14)(a1)
+	C_LDLO	REG6,UNITM1(15)(a1)
+	C_LDLO	REG7,UNITM1(16)(a1)
+        PREFETCH_FOR_LOAD (5, a1)
+	C_ST	t0,UNIT(8)(a0)
+	C_ST	t1,UNIT(9)(a0)
+	C_ST	REG2,UNIT(10)(a0)
+	C_ST	REG3,UNIT(11)(a0)
+	C_ST	REG4,UNIT(12)(a0)
+	C_ST	REG5,UNIT(13)(a0)
+	C_ST	REG6,UNIT(14)(a0)
+	C_ST	REG7,UNIT(15)(a0)
+	PTR_ADDIU a0,a0,UNIT(16)	/* adding 64/128 to dest */
+	bne	a0,a3,L(ua_loop16w)
+	PTR_ADDIU a1,a1,UNIT(16)	/* adding 64/128 to src */
+	move	a2,t8
+
+/* Here we have src and dest word-aligned but less than 64-bytes or
+ * 128 bytes to go.  Check for a 32(64) byte chunk and copy if if there
+ * is one.  Otherwise jump down to L(ua_chk1w) to handle the tail end of
+ * the copy.  */
+
+L(ua_chkw):
+	PREFETCH_FOR_LOAD (0, a1)
+	andi	t8,a2,NSIZEMASK	  /* Is there a 32-byte/64-byte chunk.  */
+				  /* t8 is the reminder count past 32-bytes */
+	beq	a2,t8,L(ua_chk1w) /* When a2=t8, no 32-byte chunk */
+	nop
+	C_LDHI	t0,UNIT(0)(a1)
+	C_LDHI	t1,UNIT(1)(a1)
+	C_LDHI	REG2,UNIT(2)(a1)
+	C_LDHI	REG3,UNIT(3)(a1)
+	C_LDHI	REG4,UNIT(4)(a1)
+	C_LDHI	REG5,UNIT(5)(a1)
+	C_LDHI	REG6,UNIT(6)(a1)
+	C_LDHI	REG7,UNIT(7)(a1)
+	C_LDLO	t0,UNITM1(1)(a1)
+	C_LDLO	t1,UNITM1(2)(a1)
+	C_LDLO	REG2,UNITM1(3)(a1)
+	C_LDLO	REG3,UNITM1(4)(a1)
+	C_LDLO	REG4,UNITM1(5)(a1)
+	C_LDLO	REG5,UNITM1(6)(a1)
+	C_LDLO	REG6,UNITM1(7)(a1)
+	C_LDLO	REG7,UNITM1(8)(a1)
+	PTR_ADDIU a1,a1,UNIT(8)
+	C_ST	t0,UNIT(0)(a0)
+	C_ST	t1,UNIT(1)(a0)
+	C_ST	REG2,UNIT(2)(a0)
+	C_ST	REG3,UNIT(3)(a0)
+	C_ST	REG4,UNIT(4)(a0)
+	C_ST	REG5,UNIT(5)(a0)
+	C_ST	REG6,UNIT(6)(a0)
+	C_ST	REG7,UNIT(7)(a0)
+	PTR_ADDIU a0,a0,UNIT(8)
+/*
+ * Here we have less than 32(64) bytes to copy.  Set up for a loop to
+ * copy one word (or double word) at a time.
+ */
+L(ua_chk1w):
+	andi	a2,t8,(NSIZE-1)	/* a2 is the reminder past one (d)word chunks */
+	beq	a2,t8,L(ua_smallCopy)
+	PTR_SUBU a3,t8,a2	/* a3 is count of bytes in one (d)word chunks */
+	PTR_ADDU a3,a0,a3	/* a3 is the dst address after loop */
+
+/* copying in words (4-byte or 8-byte chunks) */
+L(ua_wordCopy_loop):
+	C_LDHI	v1,UNIT(0)(a1)
+	C_LDLO	v1,UNITM1(1)(a1)
+	PTR_ADDIU a0,a0,UNIT(1)
+	PTR_ADDIU a1,a1,UNIT(1)
+	bne	a0,a3,L(ua_wordCopy_loop)
+	C_ST	v1,UNIT(-1)(a0)
+
+/* Copy the last 8 (or 16) bytes */
+L(ua_smallCopy):
+	beqz	a2,L(leave)
+	PTR_ADDU a3,a0,a2	/* a3 is the last dst address */
+L(ua_smallCopy_loop):
+	lb	v1,0(a1)
+	PTR_ADDIU a0,a0,1
+	PTR_ADDIU a1,a1,1
+	bne	a0,a3,L(ua_smallCopy_loop)
+	sb	v1,-1(a0)
+
+	j	ra
+	nop
+
+#else /* R6_CODE */
+
+# if __MIPSEB
+#  define SWAP_REGS(X,Y) X, Y
+#  define ALIGN_OFFSET(N) (N)
+# else
+#  define SWAP_REGS(X,Y) Y, X
+#  define ALIGN_OFFSET(N) (NSIZE-N)
+# endif
+# define R6_UNALIGNED_WORD_COPY(BYTEOFFSET) \
+	andi	REG7, a2, (NSIZE-1);/* REG7 is # of bytes to by bytes.     */ \
+	beq	REG7, a2, L(lastb); /* Check for bytes to copy by word	   */ \
+	PTR_SUBU a3, a2, REG7;	/* a3 is number of bytes to be copied in   */ \
+				/* (d)word chunks.			   */ \
+	move	a2, REG7;	/* a2 is # of bytes to copy byte by byte   */ \
+				/* after word loop is finished.		   */ \
+	PTR_ADDU REG6, a0, a3;	/* REG6 is the dst address after loop.	   */ \
+	PTR_SUBU REG2, a1, t8;	/* REG2 is the aligned src address.	   */ \
+	PTR_ADDU a1, a1, a3;	/* a1 is addr of source after word loop.   */ \
+	C_LD	t0, UNIT(0)(REG2);  /* Load first part of source.	   */ \
+L(r6_ua_wordcopy##BYTEOFFSET):						      \
+	C_LD	t1, UNIT(1)(REG2);  /* Load second part of source.	   */ \
+	C_ALIGN	REG3, SWAP_REGS(t1,t0), ALIGN_OFFSET(BYTEOFFSET);	      \
+	PTR_ADDIU a0, a0, UNIT(1);  /* Increment destination pointer.	   */ \
+	PTR_ADDIU REG2, REG2, UNIT(1); /* Increment aligned source pointer.*/ \
+	move	t0, t1;		/* Move second part of source to first.	   */ \
+	bne	a0, REG6,L(r6_ua_wordcopy##BYTEOFFSET);			      \
+	C_ST	REG3, UNIT(-1)(a0);					      \
+	j	L(lastb);						      \
+	nop
+
+	/* We are generating R6 code, the destination is 4 byte aligned and
+	   the source is not 4 byte aligned. t8 is 1, 2, or 3 depending on the
+           alignment of the source.  */
+
+L(r6_unaligned1):
+	R6_UNALIGNED_WORD_COPY(1)
+L(r6_unaligned2):
+	R6_UNALIGNED_WORD_COPY(2)
+L(r6_unaligned3):
+	R6_UNALIGNED_WORD_COPY(3)
+# ifdef USE_DOUBLE
+L(r6_unaligned4):
+	R6_UNALIGNED_WORD_COPY(4)
+L(r6_unaligned5):
+	R6_UNALIGNED_WORD_COPY(5)
+L(r6_unaligned6):
+	R6_UNALIGNED_WORD_COPY(6)
+L(r6_unaligned7):
+	R6_UNALIGNED_WORD_COPY(7)
+# endif
+#endif /* R6_CODE */
+
+	.set	at
+	.set	reorder
+END(MEMCPY_NAME)
+#ifndef ANDROID_CHANGES
+# ifdef _LIBC
+libc_hidden_builtin_def (MEMCPY_NAME)
+# endif
+#endif
--- a/src/string/mips/memset.S	1970-01-01 01:00:00.000000000 +0100
+++ b/src/string/mips/memset.S	2019-12-03 13:45:50.024846998 +0100
@@ -0,0 +1,438 @@
+/*
+ * Copyright (c) 2013
+ *      MIPS Technologies, Inc., California.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the MIPS Technologies, Inc., nor the names of its
+ *    contributors may be used to endorse or promote products derived from
+ *    this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE MIPS TECHNOLOGIES, INC. ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE MIPS TECHNOLOGIES, INC. BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifdef ANDROID_CHANGES
+# include "machine/asm.h"
+# include "machine/regdef.h"
+# define PREFETCH_STORE_HINT PREFETCH_HINT_PREPAREFORSTORE
+#elif _LIBC
+# include <sysdep.h>
+# include <regdef.h>
+# include <sys/asm.h>
+# define PREFETCH_STORE_HINT PREFETCH_HINT_PREPAREFORSTORE
+#elif _COMPILING_NEWLIB
+# include "machine/asm.h"
+# include "machine/regdef.h"
+# define PREFETCH_STORE_HINT PREFETCH_HINT_PREPAREFORSTORE
+#else
+# include <regdef.h>
+# include <asm.h>
+#define DISABLE_PREFETCH
+#endif
+
+/* Check to see if the MIPS architecture we are compiling for supports
+   prefetching.  */
+
+#if (__mips == 4) || (__mips == 5) || (__mips == 32) || (__mips == 64)
+# ifndef DISABLE_PREFETCH
+#  define USE_PREFETCH
+# endif
+#endif
+
+#if defined(_MIPS_SIM) && ((_MIPS_SIM == _ABI64) || (_MIPS_SIM == _ABIN32))
+# ifndef DISABLE_DOUBLE
+#  define USE_DOUBLE
+# endif
+#endif
+
+#ifndef USE_DOUBLE
+# ifndef DISABLE_DOUBLE_ALIGN
+#  define DOUBLE_ALIGN
+# endif
+#endif
+
+/* Some asm.h files do not have the L macro definition.  */
+#ifndef L
+# if _MIPS_SIM == _ABIO32
+#  define L(label) $L ## label
+# else
+#  define L(label) .L ## label
+# endif
+#endif
+
+/* Some asm.h files do not have the PTR_ADDIU macro definition.  */
+#ifndef PTR_ADDIU
+# ifdef USE_DOUBLE
+#  define PTR_ADDIU	daddiu
+# else
+#  define PTR_ADDIU	addiu
+# endif
+#endif
+
+/* New R6 instructions that may not be in asm.h.  */
+#ifndef PTR_LSA
+# if _MIPS_SIM == _ABI64
+#  define PTR_LSA        dlsa
+# else
+#  define PTR_LSA        lsa
+# endif
+#endif
+
+/* Using PREFETCH_HINT_PREPAREFORSTORE instead of PREFETCH_STORE
+   or PREFETCH_STORE_STREAMED offers a large performance advantage
+   but PREPAREFORSTORE has some special restrictions to consider.
+
+   Prefetch with the 'prepare for store' hint does not copy a memory
+   location into the cache, it just allocates a cache line and zeros
+   it out.  This means that if you do not write to the entire cache
+   line before writing it out to memory some data will get zero'ed out
+   when the cache line is written back to memory and data will be lost.
+
+   There are ifdef'ed sections of this memcpy to make sure that it does not
+   do prefetches on cache lines that are not going to be completely written.
+   This code is only needed and only used when PREFETCH_STORE_HINT is set to
+   PREFETCH_HINT_PREPAREFORSTORE.  This code assumes that cache lines are
+   less than MAX_PREFETCH_SIZE bytes and if the cache line is larger it will
+   not work correctly.  */
+
+#ifdef USE_PREFETCH
+# define PREFETCH_HINT_STORE		1
+# define PREFETCH_HINT_STORE_STREAMED	5
+# define PREFETCH_HINT_STORE_RETAINED	7
+# define PREFETCH_HINT_PREPAREFORSTORE	30
+
+/* If we have not picked out what hints to use at this point use the
+   standard load and store prefetch hints.  */
+# ifndef PREFETCH_STORE_HINT
+#  define PREFETCH_STORE_HINT PREFETCH_HINT_STORE
+# endif
+
+/* We double everything when USE_DOUBLE is true so we do 2 prefetches to
+   get 64 bytes in that case.  The assumption is that each individual
+   prefetch brings in 32 bytes.  */
+# ifdef USE_DOUBLE
+#  define PREFETCH_CHUNK 64
+#  define PREFETCH_FOR_STORE(chunk, reg) \
+    pref PREFETCH_STORE_HINT, (chunk)*64(reg); \
+    pref PREFETCH_STORE_HINT, ((chunk)*64)+32(reg)
+# else
+#  define PREFETCH_CHUNK 32
+#  define PREFETCH_FOR_STORE(chunk, reg) \
+    pref PREFETCH_STORE_HINT, (chunk)*32(reg)
+# endif
+
+/* MAX_PREFETCH_SIZE is the maximum size of a prefetch, it must not be less
+   than PREFETCH_CHUNK, the assumed size of each prefetch.  If the real size
+   of a prefetch is greater than MAX_PREFETCH_SIZE and the PREPAREFORSTORE
+   hint is used, the code will not work correctly.  If PREPAREFORSTORE is not
+   used than MAX_PREFETCH_SIZE does not matter.  */
+# define MAX_PREFETCH_SIZE 128
+/* PREFETCH_LIMIT is set based on the fact that we never use an offset greater
+   than 5 on a STORE prefetch and that a single prefetch can never be larger
+   than MAX_PREFETCH_SIZE.  We add the extra 32 when USE_DOUBLE is set because
+   we actually do two prefetches in that case, one 32 bytes after the other.  */
+# ifdef USE_DOUBLE
+#  define PREFETCH_LIMIT (5 * PREFETCH_CHUNK) + 32 + MAX_PREFETCH_SIZE
+# else
+#  define PREFETCH_LIMIT (5 * PREFETCH_CHUNK) + MAX_PREFETCH_SIZE
+# endif
+
+# if (PREFETCH_STORE_HINT == PREFETCH_HINT_PREPAREFORSTORE) \
+    && ((PREFETCH_CHUNK * 4) < MAX_PREFETCH_SIZE)
+/* We cannot handle this because the initial prefetches may fetch bytes that
+   are before the buffer being copied.  We start copies with an offset
+   of 4 so avoid this situation when using PREPAREFORSTORE.  */
+#  error "PREFETCH_CHUNK is too large and/or MAX_PREFETCH_SIZE is too small."
+# endif
+#else /* USE_PREFETCH not defined */
+# define PREFETCH_FOR_STORE(offset, reg)
+#endif
+
+#if __mips_isa_rev > 5
+# if (PREFETCH_STORE_HINT == PREFETCH_HINT_PREPAREFORSTORE)
+#  undef PREFETCH_STORE_HINT
+#  define PREFETCH_STORE_HINT PREFETCH_HINT_STORE_STREAMED
+# endif
+# define R6_CODE
+#endif
+
+/* Allow the routine to be named something else if desired.  */
+#ifndef MEMSET_NAME
+# define MEMSET_NAME memset
+#endif
+
+/* We load/store 64 bits at a time when USE_DOUBLE is true.
+   The C_ prefix stands for CHUNK and is used to avoid macro name
+   conflicts with system header files.  */
+
+#ifdef USE_DOUBLE
+# define C_ST	sd
+# if __MIPSEB
+#  define C_STHI	sdl	/* high part is left in big-endian	*/
+# else
+#  define C_STHI	sdr	/* high part is right in little-endian	*/
+# endif
+#else
+# define C_ST	sw
+# if __MIPSEB
+#  define C_STHI	swl	/* high part is left in big-endian	*/
+# else
+#  define C_STHI	swr	/* high part is right in little-endian	*/
+# endif
+#endif
+
+/* Bookkeeping values for 32 vs. 64 bit mode.  */
+#ifdef USE_DOUBLE
+# define NSIZE 8
+# define NSIZEMASK 0x3f
+# define NSIZEDMASK 0x7f
+#else
+# define NSIZE 4
+# define NSIZEMASK 0x1f
+# define NSIZEDMASK 0x3f
+#endif
+#define UNIT(unit) ((unit)*NSIZE)
+#define UNITM1(unit) (((unit)*NSIZE)-1)
+
+#ifdef ANDROID_CHANGES
+LEAF(MEMSET_NAME,0)
+#else
+LEAF(MEMSET_NAME)
+#endif
+
+	.set	nomips16
+	.set	noreorder
+/* If the size is less than 2*NSIZE (8 or 16), go to L(lastb).  Regardless of
+   size, copy dst pointer to v0 for the return value.  */
+	slti	t2,a2,(2 * NSIZE)
+	bne	t2,zero,L(lastb)
+	move	v0,a0
+
+/* If memset value is not zero, we copy it to all the bytes in a 32 or 64
+   bit word.  */
+	beq	a1,zero,L(set0)		/* If memset value is zero no smear  */
+	PTR_SUBU a3,zero,a0
+	nop
+
+	/* smear byte into 32 or 64 bit word */
+#if ((__mips == 64) || (__mips == 32)) && (__mips_isa_rev >= 2)
+# ifdef USE_DOUBLE
+	dins	a1, a1, 8, 8        /* Replicate fill byte into half-word.  */
+	dins	a1, a1, 16, 16      /* Replicate fill byte into word.       */
+	dins	a1, a1, 32, 32      /* Replicate fill byte into dbl word.   */
+# else
+	ins	a1, a1, 8, 8        /* Replicate fill byte into half-word.  */
+	ins	a1, a1, 16, 16      /* Replicate fill byte into word.       */
+# endif
+#else
+# ifdef USE_DOUBLE
+        and     a1,0xff
+	dsll	t2,a1,8
+	or	a1,t2
+	dsll	t2,a1,16
+	or	a1,t2
+	dsll	t2,a1,32
+	or	a1,t2
+# else
+        and     a1,0xff
+	sll	t2,a1,8
+	or	a1,t2
+	sll	t2,a1,16
+	or	a1,t2
+# endif
+#endif
+
+/* If the destination address is not aligned do a partial store to get it
+   aligned.  If it is already aligned just jump to L(aligned).  */
+L(set0):
+#ifndef R6_CODE
+	andi	t2,a3,(NSIZE-1)		/* word-unaligned address?          */
+	beq	t2,zero,L(aligned)	/* t2 is the unalignment count      */
+	PTR_SUBU a2,a2,t2
+	C_STHI	a1,0(a0)
+	PTR_ADDU a0,a0,t2
+#else /* R6_CODE */
+	andi	t2,a0,(NSIZE-1)
+	lapc	t9,L(atable)
+	PTR_LSA	t9,t2,t9,2
+	jrc	t9
+L(atable):
+	bc	L(aligned)
+# ifdef USE_DOUBLE
+	bc	L(lb7)
+	bc	L(lb6)
+	bc	L(lb5)
+	bc	L(lb4)
+# endif
+	bc	L(lb3)
+	bc	L(lb2)
+	bc	L(lb1)
+L(lb7):
+	sb	a1,6(a0)
+L(lb6):
+	sb	a1,5(a0)
+L(lb5):
+	sb	a1,4(a0)
+L(lb4):
+	sb	a1,3(a0)
+L(lb3):
+	sb	a1,2(a0)
+L(lb2):
+	sb	a1,1(a0)
+L(lb1):
+	sb	a1,0(a0)
+
+	li	t9,NSIZE
+	subu	t2,t9,t2
+	PTR_SUBU a2,a2,t2
+	PTR_ADDU a0,a0,t2
+#endif /* R6_CODE */
+
+L(aligned):
+/* If USE_DOUBLE is not set we may still want to align the data on a 16
+   byte boundry instead of an 8 byte boundry to maximize the opportunity
+   of proAptiv chips to do memory bonding (combining two sequential 4
+   byte stores into one 8 byte store).  We know there are at least 4 bytes
+   left to store or we would have jumped to L(lastb) earlier in the code.  */
+#ifdef DOUBLE_ALIGN
+	andi	t2,a3,4
+	beq	t2,zero,L(double_aligned)
+	PTR_SUBU a2,a2,t2
+	sw	a1,0(a0)
+	PTR_ADDU a0,a0,t2
+L(double_aligned):
+#endif
+
+/* Now the destination is aligned to (word or double word) aligned address
+   Set a2 to count how many bytes we have to copy after all the 64/128 byte
+   chunks are copied and a3 to the dest pointer after all the 64/128 byte
+   chunks have been copied.  We will loop, incrementing a0 until it equals
+   a3.  */
+	andi	t8,a2,NSIZEDMASK /* any whole 64-byte/128-byte chunks? */
+	beq	a2,t8,L(chkw)	 /* if a2==t8, no 64-byte/128-byte chunks */
+	PTR_SUBU a3,a2,t8	 /* subtract from a2 the reminder */
+	PTR_ADDU a3,a0,a3	 /* Now a3 is the final dst after loop */
+
+/* When in the loop we may prefetch with the 'prepare to store' hint,
+   in this case the a0+x should not be past the "t0-32" address.  This
+   means: for x=128 the last "safe" a0 address is "t0-160".  Alternatively,
+   for x=64 the last "safe" a0 address is "t0-96" In the current version we
+   will use "prefetch hint,128(a0)", so "t0-160" is the limit.  */
+#if defined(USE_PREFETCH) \
+    && (PREFETCH_STORE_HINT == PREFETCH_HINT_PREPAREFORSTORE)
+	PTR_ADDU t0,a0,a2		/* t0 is the "past the end" address */
+	PTR_SUBU t9,t0,PREFETCH_LIMIT	/* t9 is the "last safe pref" address */
+#endif
+#if defined(USE_PREFETCH) \
+    && (PREFETCH_STORE_HINT != PREFETCH_HINT_PREPAREFORSTORE)
+	PREFETCH_FOR_STORE (1, a0)
+	PREFETCH_FOR_STORE (2, a0)
+	PREFETCH_FOR_STORE (3, a0)
+#endif
+
+L(loop16w):
+#if defined(USE_PREFETCH) \
+    && (PREFETCH_STORE_HINT == PREFETCH_HINT_PREPAREFORSTORE)
+	sltu	v1,t9,a0		/* If a0 > t9 don't use next prefetch */
+	bgtz	v1,L(skip_pref)
+	nop
+#endif
+#ifndef R6_CODE
+	PREFETCH_FOR_STORE (4, a0)
+	PREFETCH_FOR_STORE (5, a0)
+#else
+	PREFETCH_FOR_STORE (2, a0)
+#endif
+L(skip_pref):
+	C_ST	a1,UNIT(0)(a0)
+	C_ST	a1,UNIT(1)(a0)
+	C_ST	a1,UNIT(2)(a0)
+	C_ST	a1,UNIT(3)(a0)
+	C_ST	a1,UNIT(4)(a0)
+	C_ST	a1,UNIT(5)(a0)
+	C_ST	a1,UNIT(6)(a0)
+	C_ST	a1,UNIT(7)(a0)
+	C_ST	a1,UNIT(8)(a0)
+	C_ST	a1,UNIT(9)(a0)
+	C_ST	a1,UNIT(10)(a0)
+	C_ST	a1,UNIT(11)(a0)
+	C_ST	a1,UNIT(12)(a0)
+	C_ST	a1,UNIT(13)(a0)
+	C_ST	a1,UNIT(14)(a0)
+	C_ST	a1,UNIT(15)(a0)
+	PTR_ADDIU a0,a0,UNIT(16)	/* adding 64/128 to dest */
+	bne	a0,a3,L(loop16w)
+	nop
+	move	a2,t8
+
+/* Here we have dest word-aligned but less than 64-bytes or 128 bytes to go.
+   Check for a 32(64) byte chunk and copy if if there is one.  Otherwise
+   jump down to L(chk1w) to handle the tail end of the copy.  */
+L(chkw):
+	andi	t8,a2,NSIZEMASK	/* is there a 32-byte/64-byte chunk.  */
+				/* the t8 is the reminder count past 32-bytes */
+	beq	a2,t8,L(chk1w)/* when a2==t8, no 32-byte chunk */
+	nop
+	C_ST	a1,UNIT(0)(a0)
+	C_ST	a1,UNIT(1)(a0)
+	C_ST	a1,UNIT(2)(a0)
+	C_ST	a1,UNIT(3)(a0)
+	C_ST	a1,UNIT(4)(a0)
+	C_ST	a1,UNIT(5)(a0)
+	C_ST	a1,UNIT(6)(a0)
+	C_ST	a1,UNIT(7)(a0)
+	PTR_ADDIU a0,a0,UNIT(8)
+
+/* Here we have less than 32(64) bytes to set.  Set up for a loop to
+   copy one word (or double word) at a time.  Set a2 to count how many
+   bytes we have to copy after all the word (or double word) chunks are
+   copied and a3 to the dest pointer after all the (d)word chunks have
+   been copied.  We will loop, incrementing a0 until a0 equals a3.  */
+L(chk1w):
+	andi	a2,t8,(NSIZE-1)	/* a2 is the reminder past one (d)word chunks */
+	beq	a2,t8,L(lastb)
+	PTR_SUBU a3,t8,a2	/* a3 is count of bytes in one (d)word chunks */
+	PTR_ADDU a3,a0,a3	/* a3 is the dst address after loop */
+
+/* copying in words (4-byte or 8 byte chunks) */
+L(wordCopy_loop):
+	PTR_ADDIU a0,a0,UNIT(1)
+	bne	a0,a3,L(wordCopy_loop)
+	C_ST	a1,UNIT(-1)(a0)
+
+/* Copy the last 8 (or 16) bytes */
+L(lastb):
+	blez	a2,L(leave)
+	PTR_ADDU a3,a0,a2       /* a3 is the last dst address */
+L(lastbloop):
+	PTR_ADDIU a0,a0,1
+	bne	a0,a3,L(lastbloop)
+	sb	a1,-1(a0)
+L(leave):
+	j	ra
+	nop
+
+	.set	at
+	.set	reorder
+END(MEMSET_NAME)
+#ifndef ANDROID_CHANGES
+# ifdef _LIBC
+libc_hidden_builtin_def (MEMSET_NAME)
+# endif
+#endif