/*
* Wireless Tools
*
* Jean II - HPLB 97->99 - HPL 99->07
*
* Main code for "iwconfig". This is the generic tool for most
* manipulations...
* You need to link this code against "iwlib.c" and "-lm".
*
* This file is released under the GPL license.
* Copyright (c) 1997-2007 Jean Tourrilhes <jt@hpl.hp.com>
*/
#include "iwlib.h" /* Header */
/************************** DOCUMENTATION **************************/
/*
* BASIC PRINCIPLE
* ---------------
* Wireless Extension recognise that each wireless device has some
* specific features not covered by the standard wireless extensions.
* Private wireless ioctls/requests allow a device to export the control
* of those device specific features, and allow users to directly interact
* with your driver.
* There are many other ways you can implement such functionality :
* o module parameters
* o netlink socket
* o file system (/proc/ or /sysfs/)
* o extra character device (/dev/)
* Private wireless ioctls is one of the simplest implementation,
* however it is limited, so you may want to check the alternatives.
*
* Like for standard Wireless Extensions, each private wireless
* request is identified by an IOCTL NUMBER and carry a certain number
* of arguments (SET or GET).
* The driver exports a description of those requests (ioctl number,
* request name, set and get arguments). Then, iwpriv uses those request
* descriptions to call the appropriate request and handle the
* arguments.
*
* IOCTL RANGES :
* ------------
* The initial implementation of iwpriv was using the SIOCDEVPRIVATE
* ioctl range (up to 16 ioctls - driver specific). However, this was
* causing some compatibility problems with other usages of those
* ioctls, and those ioctls are supposed to be removed.
* Therefore, I created a new ioctl range, at SIOCIWFIRSTPRIV. Those
* ioctls are specific to Wireless Extensions, so you don't have to
* worry about collisions with other usages. On the other hand, in the
* new range, the SET convention is enforced (see below).
* The differences are : SIOCDEVPRIVATE SIOCIWFIRSTPRIV
* o availability <= 2.5.X WE > 11 (>= 2.4.13)
* o collisions yes no
* o SET convention optional enforced
* o number 16 32
*
* NEW DRIVER API :
* --------------
* Wireless Extension 13 introduces a new driver API. Wireless
* Extensions requests can be handled via a iw_handler table instead
* of through the regular ioctl handler.
* The new driver API can be handled only with the new ioctl range
* and enforces the GET convention (see below).
* The differences are : old API new API
* o handler do_ioctl() struct iw_handler_def
* o SIOCIWFIRSTPRIV WE > 11 yes
* o SIOCDEVPRIVATE yes no
* o GET convention optional enforced
* Note that the new API before Wireless Extension 15 contains bugs
* when handling sub-ioctls and addr/float data types.
*
* INLINING vs. POINTER :
* --------------------
* One of the tricky aspect of the old driver API is how the data
* is handled, which is how the driver is supposed to extract the data
* passed to it by iwpriv.
* 1) If the data has a fixed size (private ioctl definition
* has the flag IW_PRIV_SIZE_FIXED) and the byte size of the data is
* lower than 16 bytes, the data will be inlined. The driver can extract
* data in the field 'u.name' of the struct iwreq.
* 2) If the if the data doesn't have a fixed size or is larger than
* 16 bytes, the data is passed by pointer. struct iwreq contains a
* struct iwpoint with a user space pointer to the data. Appropriate
* copy_from/to_user() function should be used.
*
* With the new API, this is handled transparently, the data is
* always available as the fourth argument of the request handler
* (usually called 'extra').
*
* SET/GET CONVENTION :
* ------------------
* Simplistic summary :
* o even numbered ioctls are SET, restricted to root, and should not
* return arguments (get_args = 0).
* o odd numbered ioctls are GET, authorised to anybody, and should
* not expect any arguments (set_args = 0).
*
* The regular Wireless Extensions use the SET/GET convention, where
* the low order bit identify a SET (0) or a GET (1) request. The private
* Wireless Extension is not as restrictive, but still has some
* limitations.
* The new ioctl range enforces the SET convention : SET request will
* be available to root only and can't return any arguments. If you don't
* like that, just use every other two ioctl.
* The new driver API enforce the GET convention : GET request won't
* be able to accept any arguments (except if its fits within (union
* iwreq_data)). If you don't like that, you can either use the Token Index
* support or the old API (aka the ioctl handler).
* In any case, it's a good idea to not have ioctl with both SET
* and GET arguments. If the GET arguments doesn't fit within
* (union iwreq_data) and SET do, or vice versa, the current code in iwpriv
* won't work. One exception is if both SET and GET arguments fit within
* (union iwreq_data), this case should be handled safely in a GET
* request.
* If you don't fully understand those limitations, just follow the
* rules of the simplistic summary ;-)
*
* SUB-IOCTLS :
* ----------
* Wireless Extension 15 introduces sub-ioctls. For some applications,
* 32 ioctls is not enough, and this simple mechanism allows to increase
* the number of ioctls by adding a sub-ioctl index to some of the ioctls
* (so basically it's a two level addressing).
* One might argue that at the point, some other mechanisms might be
* better, like using a real filesystem abstraction (/proc, driverfs, ...),
* but sub-ioctls are simple enough and don't have much drawbacks (which
* means that it's a quick and dirty hack ;-).
*
* There are two slightly different variations of the sub-ioctl scheme :
* 1) If the payload fits within (union iwreq_data), the first int
* (4 bytes) is reserved as the sub-ioctl number and the regular payload
* shifted by 4 bytes. The handler must extract the sub-ioctl number,
* increment the data pointer and then use it in the usual way.
* 2) If the ioctl uses (struct iw_point), the sub-ioctl number is
* set in the flags member of the structure. In this case, the handler
* should simply get the sub-ioctl number from the flags and process the
* data in the usual way.
*
* Sub-ioctls are declared normally in the private definition table,
* with cmd (first arg) being the sub-ioctl number. Then, you should
* declare the real ioctl, which will process the sub-ioctls, with
* the SAME ARGUMENTS and a EMPTY NAME.
* Here's an example of how it could look like :
* --------------------------------------------
// --- sub-ioctls handlers ---
{ 0x8BE0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "" },
{ 0x8BE1, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "" },
// --- sub-ioctls definitions ---
{ 1, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_param1" },
{ 1, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "get_param1" },
{ 2, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_param2" },
{ 2, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "get_param2" },
// --- Raw access to sub-ioctl handlers ---
{ 0x8BE0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "set_paramN" },
{ 0x8BE1, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "get_paramN" },
* --------------------------------------------
* And iwpriv should do the rest for you ;-)
*
* Note that versions of iwpriv up to v24 (included) expect at most
* 16 ioctls definitions and will likely crash when given more.
* There is no fix that I can see, apart from recommending your users
* to upgrade their Wireless Tools. Wireless Extensions 15 will check this
* condition, so another workaround is restricting those extra definitions
* to WE-15.
*
* Another problem is that the new API before Wireless Extension 15
* has a bug when passing fixed arguments of 12-15 bytes. It will
* try to get them inline instead of by pointer. You can fool the new API
* to do the right thing using fake ioctl definitions (but remember that
* you will be more likely to hit the limit of 16 ioctl definitions).
* To play safe, use the old-style ioctl handler before v15.
*
* NEW DATA TYPES (ADDR/FLOAT) :
* ---------------------------
* Wireless Tools 25 introduce two new data types, addr and float,
* corresponding to struct sockaddr and struct iwfreq.
* Those types are properly handled with Wireless Extensions 15.
* However, the new API before v15 won't handle them properly.
*
* The first problem is that the new API won't know their size, so
* it won't copy them. This can be workaround with a fake ioctl definition.
* The second problem is that a fixed single addr won't be inlined
* in struct iwreq and will be passed as a pointer. This is due to an
* off-by-one error, where all fixed data of 16 bytes is considered too
* big to fit in struct iwreq.
*
* For those reasons, I would recommend to use the ioctl handler
* before v15 when manipulating those data.
*
* TOKEN INDEX :
* -----------
* Token index is very similar to sub-ioctl. It allows the user
* to specify an integer index in front of a bunch of other arguments
* (addresses, strings, ...). It's specified in square brackets on the
* iwpriv command line before other arguments.
* > iwpriv eth0 [index] args...
* Token index works only when the data is passed as pointer, and
* is otherwise ignored. If your data would fit within struct iwreq, you
* should declare the command *without* IW_PRIV_SIZE_FIXED to force
* this to happen (and check arg number yourself).
* --------------------------------------------
// --- Commands that would fit in struct iwreq ---
{ 0x8BE0, IW_PRIV_TYPE_ADDR | 1, 0, "set_param_with_token" },
// --- No problem here (bigger than struct iwreq) ---
{ 0x8BE1, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 2, 0, "again" },
* --------------------------------------------
* The token index feature is pretty transparent, the token index
* will just be in the flags member of (struct iw_point). Default value
* (if the user doesn't specify it) will be 0. Token index itself will
* work with any version of Wireless Extensions.
* Token index is not compatible with sub-ioctl (both use the same
* field of struct iw_point). However, the token index can be used to offer
* raw access to the sub-ioctl handlers (if it uses struct iw_point) :
* --------------------------------------------
// --- sub-ioctls handler ---
{ 0x8BE0, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "" },
// --- sub-ioctls definitions ---
{ 0, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "setaddr" },
{ 1, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "deladdr" },
// --- raw access with token index (+ iwreq workaround) ---
{ 0x8BE0, IW_PRIV_TYPE_ADDR | 1, 0, "rawaddr" },
* --------------------------------------------
*
* Jean II
*/
/**************************** CONSTANTS ****************************/
static const char * argtype[] = {
" ", "byte ", "char ", "", "int ", "float", "addr " };
/************************* MISC SUBROUTINES **************************/
/*------------------------------------------------------------------*/
/*
* Print usage string
*/
static void
iw_usage(void)
{
fprintf(stderr, "Usage: iwpriv interface [private-command [private-arguments]]\n");
}
/************************* SETTING ROUTINES **************************/
/*------------------------------------------------------------------*/
/*
* Execute a private command on the interface
*/
static int
set_private_cmd(int skfd, /* Socket */
char * args[], /* Command line args */
int count, /* Args count */
char * ifname, /* Dev name */
char * cmdname, /* Command name */
iwprivargs * priv, /* Private ioctl description */
int priv_num) /* Number of descriptions */
{
struct iwreq wrq;
u_char buffer[4096]; /* Only that big in v25 and later */
int i = 0; /* Start with first command arg */
int k; /* Index in private description table */
int temp;
int subcmd = 0; /* sub-ioctl index */
int offset = 0; /* Space for sub-ioctl index */
/* Check if we have a token index.
* Do it now so that sub-ioctl takes precedence, and so that we
* don't have to bother with it later on... */
if((count >= 1) && (sscanf(args[0], "[%i]", &temp) == 1))
{
subcmd = temp;
args++;
count--;
}
/* Search the correct ioctl */
k = -1;
while((++k < priv_num) && strcmp(priv[k].name, cmdname));
/* If not found... */
if(k == priv_num)
{
fprintf(stderr, "Invalid command : %s\n", cmdname);
return(-1);
}
/* Watch out for sub-ioctls ! */
if(priv[k].cmd < SIOCDEVPRIVATE)
{
int j = -1;
/* Find the matching *real* ioctl */
while((++j < priv_num) && ((priv[j].name[0] != '\0') ||
(priv[j].set_args != priv[k].set_args) ||
(priv[j].get_args != priv[k].get_args)));
/* If not found... */
if(j == priv_num)
{
fprintf(stderr, "Invalid private ioctl definition for : %s\n",
cmdname);
return(-1);
}
/* Save sub-ioctl number */
subcmd = priv[k].cmd;
/* Reserve one int (simplify alignment issues) */
offset = sizeof(__u32);
/* Use real ioctl definition from now on */
k = j;
#if 0
printf("<mapping sub-ioctl %s to cmd 0x%X-%d>\n", cmdname,
priv[k].cmd, subcmd);
#endif
}
/* If we have to set some data */
if((priv[k].set_args & IW_PRIV_TYPE_MASK) &&
(priv[k].set_args & IW_PRIV_SIZE_MASK))
{
switch(priv[k].set_args & IW_PRIV_TYPE_MASK)
{
case IW_PRIV_TYPE_BYTE:
/* Number of args to fetch */
wrq.u.data.length = count;
if(wrq.u.data.length > (priv[k].set_args & IW_PRIV_SIZE_MASK))
wrq.u.data.length = priv[k].set_args & IW_PRIV_SIZE_MASK;
/* Fetch args */
for(; i < wrq.u.data.length; i++) {
sscanf(args[i], "%i", &temp);
buffer[i] = (char) temp;
}
break;
case IW_PRIV_TYPE_INT:
/* Number of args to fetch */
wrq.u.data.length = count;
if(wrq.u.data.length > (priv[k].set_args & IW_PRIV_SIZE_MASK))
wrq.u.data.length = priv[k].set_args & IW_PRIV_SIZE_MASK;
/* Fetch args */
for(; i < wrq.u.data.length; i++) {
sscanf(args[i], "%i", &temp);
((__s32 *) buffer)[i] = (__s32) temp;
}
break;
case IW_PRIV_TYPE_CHAR:
if(i < count)
{
/* Size of the string to fetch */
wrq.u.data.length = strlen(args[i]) + 1;
if(wrq.u.data.length > (priv[k].set_args & IW_PRIV_SIZE_MASK))
wrq.u.data.length = priv[k].set_args & IW_PRIV_SIZE_MASK;
/* Fetch string */
memcpy(buffer, args[i], wrq.u.data.length);
buffer[sizeof(buffer) - 1] = '\0';
i++;
}
else
{
wrq.u.data.length = 1;
buffer[0] = '\0';
}
break;
case IW_PRIV_TYPE_FLOAT:
/* Number of args to fetch */
wrq.u.data.length = count;
if(wrq.u.data.length > (priv[k].set_args & IW_PRIV_SIZE_MASK))
wrq.u.data.length = priv[k].set_args & IW_PRIV_SIZE_MASK;
/* Fetch args */
for(; i < wrq.u.data.length; i++) {
double freq;
if(sscanf(args[i], "%lg", &(freq)) != 1)
{
printf("Invalid float [%s]...\n", args[i]);
return(-1);
}
if(strchr(args[i], 'G')) freq *= GIGA;
if(strchr(args[i], 'M')) freq *= MEGA;
if(strchr(args[i], 'k')) freq *= KILO;
sscanf(args[i], "%i", &temp);
iw_float2freq(freq, ((struct iw_freq *) buffer) + i);
}
break;
case IW_PRIV_TYPE_ADDR:
/* Number of args to fetch */
wrq.u.data.length = count;
if(wrq.u.data.length > (priv[k].set_args & IW_PRIV_SIZE_MASK))
wrq.u.data.length = priv[k].set_args & IW_PRIV_SIZE_MASK;
/* Fetch args */
for(; i < wrq.u.data.length; i++) {
if(iw_in_addr(skfd, ifname, args[i],
((struct sockaddr *) buffer) + i) < 0)
{
printf("Invalid address [%s]...\n", args[i]);
return(-1);
}
}
break;
default:
fprintf(stderr, "Not implemented...\n");
return(-1);
}
if((priv[k].set_args & IW_PRIV_SIZE_FIXED) &&
(wrq.u.data.length != (priv[k].set_args & IW_PRIV_SIZE_MASK)))
{
printf("The command %s needs exactly %d argument(s)...\n",
cmdname, priv[k].set_args & IW_PRIV_SIZE_MASK);
return(-1);
}
} /* if args to set */
else
{
wrq.u.data.length = 0L;
}
strncpy(wrq.ifr_name, ifname, IFNAMSIZ);
/* Those two tests are important. They define how the driver
* will have to handle the data */
if((priv[k].set_args & IW_PRIV_SIZE_FIXED) &&
((iw_get_priv_size(priv[k].set_args) + offset) <= IFNAMSIZ))
{
/* First case : all SET args fit within wrq */
if(offset)
wrq.u.mode = subcmd;
memcpy(wrq.u.name + offset, buffer, IFNAMSIZ - offset);
}
else
{
if((priv[k].set_args == 0) &&
(priv[k].get_args & IW_PRIV_SIZE_FIXED) &&
(iw_get_priv_size(priv[k].get_args) <= IFNAMSIZ))
{
/* Second case : no SET args, GET args fit within wrq */
if(offset)
wrq.u.mode = subcmd;
}
else
{
/* Third case : args won't fit in wrq, or variable number of args */
wrq.u.data.pointer = (caddr_t) buffer;
wrq.u.data.flags = subcmd;
}
}
/* Perform the private ioctl */
if(ioctl(skfd, priv[k].cmd, &wrq) < 0)
{
fprintf(stderr, "Interface doesn't accept private ioctl...\n");
fprintf(stderr, "%s (%X): %s\n", cmdname, priv[k].cmd, strerror(errno));
return(-1);
}
/* If we have to get some data */
if((priv[k].get_args & IW_PRIV_TYPE_MASK) &&
(priv[k].get_args & IW_PRIV_SIZE_MASK))
{
int j;
int n = 0; /* number of args */
printf("%-8.16s %s:", ifname, cmdname);
/* Check where is the returned data */
if((priv[k].get_args & IW_PRIV_SIZE_FIXED) &&
(iw_get_priv_size(priv[k].get_args) <= IFNAMSIZ))
{
memcpy(buffer, wrq.u.name, IFNAMSIZ);
n = priv[k].get_args & IW_PRIV_SIZE_MASK;
}
else
n = wrq.u.data.length;
switch(priv[k].get_args & IW_PRIV_TYPE_MASK)
{
case IW_PRIV_TYPE_BYTE:
/* Display args */
for(j = 0; j < n; j++)
printf("%d ", buffer[j]);
printf("\n");
break;
case IW_PRIV_TYPE_INT:
/* Display args */
for(j = 0; j < n; j++)
printf("%d ", ((__s32 *) buffer)[j]);
printf("\n");
break;
case IW_PRIV_TYPE_CHAR:
/* Display args */
buffer[n] = '\0';
printf("%s\n", buffer);
break;
case IW_PRIV_TYPE_FLOAT:
{
double freq;
/* Display args */
for(j = 0; j < n; j++)
{
freq = iw_freq2float(((struct iw_freq *) buffer) + j);
if(freq >= GIGA)
printf("%gG ", freq / GIGA);
else
if(freq >= MEGA)
printf("%gM ", freq / MEGA);
else
printf("%gk ", freq / KILO);
}
printf("\n");
}
break;
case IW_PRIV_TYPE_ADDR:
{
char scratch[128];
struct sockaddr * hwa;
/* Display args */
for(j = 0; j < n; j++)
{
hwa = ((struct sockaddr *) buffer) + j;
if(j)
printf(" %.*s",
(int) strlen(cmdname), " ");
printf("%s\n", iw_saether_ntop(hwa, scratch));
}
}
break;
default:
fprintf(stderr, "Not yet implemented...\n");
return(-1);
}
} /* if args to set */
return(0);
}
/*------------------------------------------------------------------*/
/*
* Execute a private command on the interface
*/
static inline int
set_private(int skfd, /* Socket */
char * args[], /* Command line args */
int count, /* Args count */
char * ifname) /* Dev name */
{
iwprivargs * priv;
int number; /* Max of private ioctl */
int ret;
/* Read the private ioctls */
number = iw_get_priv_info(skfd, ifname, &priv);
/* Is there any ? */
if(number <= 0)
{
/* Should I skip this message ? */
fprintf(stderr, "%-8.16s no private ioctls.\n\n",
ifname);
if(priv)
free(priv);
return(-1);
}
/* Do it */
ret = set_private_cmd(skfd, args + 1, count - 1, ifname, args[0],
priv, number);
free(priv);
return(ret);
}
/************************ CATALOG FUNCTIONS ************************/
/*------------------------------------------------------------------*/
/*
* Print on the screen in a neat fashion the list of private ioctls
* for the device.
*/
static int
print_priv_info(int skfd,
char * ifname,
char * args[],
int count)
{
int k;
iwprivargs * priv;
int n;
/* Avoid "Unused parameter" warning */
args = args; count = count;
/* Read the private ioctls */
n = iw_get_priv_info(skfd, ifname, &priv);
/* Is there any ? */
if(n <= 0)
{
/* Should I skip this message ? */
fprintf(stderr, "%-8.16s no private ioctls.\n\n",
ifname);
}
else
{
printf("%-8.16s Available private ioctls :\n", ifname);
/* Print them all */
for(k = 0; k < n; k++)
if(priv[k].name[0] != '\0')
printf(" %-16.16s (%.4X) : set %3d %s & get %3d %s\n",
priv[k].name, priv[k].cmd,
priv[k].set_args & IW_PRIV_SIZE_MASK,
argtype[(priv[k].set_args & IW_PRIV_TYPE_MASK) >> 12],
priv[k].get_args & IW_PRIV_SIZE_MASK,
argtype[(priv[k].get_args & IW_PRIV_TYPE_MASK) >> 12]);
printf("\n");
}
/* Cleanup */
if(priv)
free(priv);
return(0);
}
/*------------------------------------------------------------------*/
/*
* Print on the screen in a neat fashion the list of private GET ioctl
* data for the device and data returned by those.
*/
static int
print_priv_all(int skfd,
char * ifname,
char * args[],
int count)
{
int k;
iwprivargs * priv;
int n;
/* Avoid "Unused parameter" warning */
args = args; count = count;
/* Read the private ioctls */
n = iw_get_priv_info(skfd, ifname, &priv);
/* Is there any ? */
if(n <= 0)
{
/* Should I skip this message ? */
fprintf(stderr, "%-8.16s no private ioctls.\n\n",
ifname);
}
else
{
printf("%-8.16s Available read-only private ioctl :\n", ifname);
/* Print them all */
for(k = 0; k < n; k++)
/* We call all ioctls that don't have a null name, don't require
* args and return some (avoid triggering "reset" commands) */
if((priv[k].name[0] != '\0') && (priv[k].set_args == 0) &&
(priv[k].get_args != 0))
set_private_cmd(skfd, NULL, 0, ifname, priv[k].name,
priv, n);
printf("\n");
}
/* Cleanup */
if(priv)
free(priv);
return(0);
}
/********************** PRIVATE IOCTLS MANIPS ***********************/
/*
* Convenient access to some private ioctls of some devices
*/
#if 0
/*------------------------------------------------------------------*/
/*
* Set roaming mode on and off
* Found in wavelan_cs driver
* Note : this is obsolete, most 802.11 devices should use the
* SIOCSIWAP request.
*/
static int
set_roaming(int skfd, /* Socket */
char * args[], /* Command line args */
int count, /* Args count */
char * ifname) /* Dev name */
{
u_char buffer[1024];
struct iwreq wrq;
int i = 0; /* Start with first arg */
int k;
iwprivargs * priv;
int number;
int roamcmd;
char RoamState; /* buffer to hold new roam state */
char ChangeRoamState=0; /* whether or not we are going to
change roam states */
/* Read the private ioctls */
number = iw_get_priv_info(skfd, ifname, &priv);
/* Is there any ? */
if(number <= 0)
{
/* Should I skip this message ? */
fprintf(stderr, "%-8.16s no private ioctls.\n\n",
ifname);
if(priv)
free(priv);
return(-1);
}
/* Get the ioctl number */
k = -1;
while((++k < number) && strcmp(priv[k].name, "setroam"));
if(k == number)
{
fprintf(stderr, "This device doesn't support roaming\n");
free(priv);
return(-1);
}
roamcmd = priv[k].cmd;
/* Cleanup */
free(priv);
if(count != 1)
{
iw_usage();
return(-1);
}
if(!strcasecmp(args[i], "on"))
{
printf("%-8.16s enable roaming\n", ifname);
if(!number)
{
fprintf(stderr, "This device doesn't support roaming\n");
return(-1);
}
ChangeRoamState=1;
RoamState=1;
}
else
if(!strcasecmp(args[i], "off"))
{
i++;
printf("%-8.16s disable roaming\n", ifname);
if(!number)
{
fprintf(stderr, "This device doesn't support roaming\n");
return(-1);
}
ChangeRoamState=1;
RoamState=0;
}
else
{
iw_usage();
return(-1);
}
if(ChangeRoamState)
{
strncpy(wrq.ifr_name, ifname, IFNAMSIZ);
buffer[0]=RoamState;
memcpy(wrq.u.name, &buffer, IFNAMSIZ);
if(ioctl(skfd, roamcmd, &wrq) < 0)
{
fprintf(stderr, "Roaming support is broken.\n");
return(-1);
}
}
return(0);
}
/*------------------------------------------------------------------*/
/*
* Get and set the port type
* Found in wavelan2_cs and wvlan_cs drivers
* TODO : Add support for HostAP ?
*/
static int
port_type(int skfd, /* Socket */
char * args[], /* Command line args */
int count, /* Args count */
char * ifname) /* Dev name */
{
struct iwreq wrq;
int i = 0; /* Start with first arg */
int k;
iwprivargs * priv;
int number;
char ptype = 0;
char * modes[] = { "invalid", "managed (BSS)", "reserved", "ad-hoc" };
/* Read the private ioctls */
number = iw_get_priv_info(skfd, ifname, &priv);
/* Is there any ? */
if(number <= 0)
{
/* Should I skip this message ? */
fprintf(stderr, "%-8.16s no private ioctls.\n\n", ifname);
if(priv)
free(priv);
return(-1);
}
/* Arguments ? */
if(count == 0)
{
/* So, we just want to see the current value... */
k = -1;
while((++k < number) && strcmp(priv[k].name, "gport_type") &&
strcmp(priv[k].name, "get_port"));
if(k == number)
{
fprintf(stderr, "This device doesn't support getting port type\n");
goto err;
}
strncpy(wrq.ifr_name, ifname, IFNAMSIZ);
/* Get it */
if(ioctl(skfd, priv[k].cmd, &wrq) < 0)
{
fprintf(stderr, "Port type support is broken.\n");
goto err;
}
ptype = *wrq.u.name;
/* Display it */
printf("%-8.16s Current port mode is %s <port type is %d>.\n\n",
ifname, modes[(int) ptype], ptype);
free(priv);
return(0);
}
if(count != 1)
{
iw_usage();
goto err;
}
/* Read it */
/* As a string... */
k = 0;
while((k < 4) && strncasecmp(args[i], modes[k], 2))
k++;
if(k < 4)
ptype = k;
else
/* ...or as an integer */
if(sscanf(args[i], "%i", (int *) &ptype) != 1)
{
iw_usage();
goto err;
}
k = -1;
while((++k < number) && strcmp(priv[k].name, "sport_type") &&
strcmp(priv[k].name, "set_port"));
if(k == number)
{
fprintf(stderr, "This device doesn't support setting port type\n");
goto err;
}
strncpy(wrq.ifr_name, ifname, IFNAMSIZ);
*(wrq.u.name) = ptype;
if(ioctl(skfd, priv[k].cmd, &wrq) < 0)
{
fprintf(stderr, "Invalid port type (or setting not allowed)\n");
goto err;
}
free(priv);
return(0);
err:
free(priv);
return(-1);
}
#endif
/******************************* MAIN ********************************/
/*------------------------------------------------------------------*/
/*
* The main !
*/
int
main(int argc,
char ** argv)
{
int skfd; /* generic raw socket desc. */
int goterr = 0;
/* Create a channel to the NET kernel. */
if((skfd = iw_sockets_open()) < 0)
{
perror("socket");
return(-1);
}
/* No argument : show the list of all devices + ioctl list */
if(argc == 1)
iw_enum_devices(skfd, &print_priv_info, NULL, 0);
else
/* Special cases take one... */
/* All */
if((!strncmp(argv[1], "-a", 2)) || (!strcmp(argv[1], "--all")))
iw_enum_devices(skfd, &print_priv_all, NULL, 0);
else
/* Help */
if((!strncmp(argv[1], "-h", 2)) || (!strcmp(argv[1], "--help")))
iw_usage();
else
/* Version */
if (!strcmp(argv[1], "-v") || !strcmp(argv[1], "--version"))
goterr = iw_print_version_info("iwpriv");
else
/* The device name must be the first argument */
/* Name only : show for that device only */
if(argc == 2)
print_priv_info(skfd, argv[1], NULL, 0);
else
/* Special cases take two... */
/* All */
if((!strncmp(argv[2], "-a", 2)) ||
(!strcmp(argv[2], "--all")))
print_priv_all(skfd, argv[1], NULL, 0);
else
#if 0
/* Roaming */
if(!strncmp(argv[2], "roam", 4))
goterr = set_roaming(skfd, argv + 3, argc - 3, argv[1]);
else
/* Port type */
if(!strncmp(argv[2], "port", 4))
goterr = port_type(skfd, argv + 3, argc - 3, argv[1]);
else
#endif
/*-------------*/
/* Otherwise, it's a private ioctl */
goterr = set_private(skfd, argv + 2, argc - 2, argv[1]);
/* Close the socket. */
iw_sockets_close(skfd);
return(goterr);
}