/* * Linux ARCnet driver - COM90xx chipset (memory-mapped buffers) * * Written 1994-1999 by Avery Pennarun. * Written 1999 by Martin Mares . * Derived from skeleton.c by Donald Becker. * * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) * for sponsoring the further development of this driver. * * ********************** * * The original copyright of skeleton.c was as follows: * * skeleton.c Written 1993 by Donald Becker. * Copyright 1993 United States Government as represented by the * Director, National Security Agency. This software may only be used * and distributed according to the terms of the GNU General Public License as * modified by SRC, incorporated herein by reference. * * ********************** * * For more details, see drivers/net/arcnet.c * * ********************** */ #include #include #include #include #include #include #include #include #define VERSION "arcnet: COM90xx chipset support\n" /* Define this to speed up the autoprobe by assuming if only one io port and * shmem are left in the list at Stage 5, they must correspond to each * other. * * This is undefined by default because it might not always be true, and the * extra check makes the autoprobe even more careful. Speed demons can turn * it on - I think it should be fine if you only have one ARCnet card * installed. * * If no ARCnet cards are installed, this delay never happens anyway and thus * the option has no effect. */ #undef FAST_PROBE /* Internal function declarations */ static int com90xx_found(struct net_device *dev, int ioaddr, int airq, u_long shmem); static void com90xx_command(struct net_device *dev, int command); static int com90xx_status(struct net_device *dev); static void com90xx_setmask(struct net_device *dev, int mask); static int com90xx_reset(struct net_device *dev, int really_reset); static void com90xx_openclose(struct net_device *dev, bool open); static void com90xx_copy_to_card(struct net_device *dev, int bufnum, int offset, void *buf, int count); static void com90xx_copy_from_card(struct net_device *dev, int bufnum, int offset, void *buf, int count); /* Known ARCnet cards */ static struct net_device *cards[16]; static int numcards; /* Handy defines for ARCnet specific stuff */ /* The number of low I/O ports used by the card */ #define ARCNET_TOTAL_SIZE 16 /* Amount of I/O memory used by the card */ #define BUFFER_SIZE (512) #define MIRROR_SIZE (BUFFER_SIZE*4) /* COM 9026 controller chip --> ARCnet register addresses */ #define _INTMASK (ioaddr+0) /* writable */ #define _STATUS (ioaddr+0) /* readable */ #define _COMMAND (ioaddr+1) /* writable, returns random vals on read (?) */ #define _CONFIG (ioaddr+2) /* Configuration register */ #define _RESET (ioaddr+8) /* software reset (on read) */ #define _MEMDATA (ioaddr+12) /* Data port for IO-mapped memory */ #define _ADDR_HI (ioaddr+15) /* Control registers for said */ #define _ADDR_LO (ioaddr+14) #undef ASTATUS #undef ACOMMAND #undef AINTMASK #define ASTATUS() inb(_STATUS) #define ACOMMAND(cmd) outb((cmd),_COMMAND) #define AINTMASK(msk) outb((msk),_INTMASK) static int com90xx_skip_probe __initdata = 0; int __init com90xx_probe(struct net_device *dev) { int count, status, ioaddr, numprint, airq, retval = -ENODEV, openparen = 0; unsigned long airqmask; int ports[(0x3f0 - 0x200) / 16 + 1] = {0}; u_long shmems[(0xFF800 - 0xA0000) / 2048 + 1] = {0}; int numports, numshmems, *port; u_long *shmem; if (!dev && com90xx_skip_probe) return -ENODEV; #ifndef MODULE arcnet_init(); #endif BUGLVL(D_NORMAL) printk(VERSION); /* set up the arrays where we'll store the possible probe addresses */ numports = numshmems = 0; if (dev && dev->base_addr) ports[numports++] = dev->base_addr; else for (count = 0x200; count <= 0x3f0; count += 16) ports[numports++] = count; if (dev && dev->mem_start) shmems[numshmems++] = dev->mem_start; else for (count = 0xA0000; count <= 0xFF800; count += 2048) shmems[numshmems++] = count; /* Stage 1: abandon any reserved ports, or ones with status==0xFF * (empty), and reset any others by reading the reset port. */ numprint = -1; for (port = &ports[0]; port - ports < numports; port++) { numprint++; numprint %= 8; if (!numprint) { BUGMSG2(D_INIT, "\n"); BUGMSG2(D_INIT, "S1: "); } BUGMSG2(D_INIT, "%Xh ", *port); ioaddr = *port; if (check_region(*port, ARCNET_TOTAL_SIZE)) { BUGMSG2(D_INIT_REASONS, "(check_region)\n"); BUGMSG2(D_INIT_REASONS, "S1: "); BUGLVL(D_INIT_REASONS) numprint = 0; *port = ports[numports - 1]; numports--; port--; continue; } if (ASTATUS() == 0xFF) { BUGMSG2(D_INIT_REASONS, "(empty)\n"); BUGMSG2(D_INIT_REASONS, "S1: "); BUGLVL(D_INIT_REASONS) numprint = 0; *port = ports[numports - 1]; numports--; port--; continue; } inb(_RESET); /* begin resetting card */ BUGMSG2(D_INIT_REASONS, "\n"); BUGMSG2(D_INIT_REASONS, "S1: "); BUGLVL(D_INIT_REASONS) numprint = 0; } BUGMSG2(D_INIT, "\n"); if (!numports) { BUGMSG2(D_NORMAL, "S1: No ARCnet cards found.\n"); return -ENODEV; } /* Stage 2: we have now reset any possible ARCnet cards, so we can't * do anything until they finish. If D_INIT, print the list of * cards that are left. */ numprint = -1; for (port = &ports[0]; port - ports < numports; port++) { numprint++; numprint %= 8; if (!numprint) { BUGMSG2(D_INIT, "\n"); BUGMSG2(D_INIT, "S2: "); } BUGMSG2(D_INIT, "%Xh ", *port); } BUGMSG2(D_INIT, "\n"); mdelay(RESETtime); /* Stage 3: abandon any shmem addresses that don't have the signature * 0xD1 byte in the right place, or are read-only. */ numprint = -1; for (shmem = &shmems[0]; shmem - shmems < numshmems; shmem++) { u_long ptr = *shmem; numprint++; numprint %= 8; if (!numprint) { BUGMSG2(D_INIT, "\n"); BUGMSG2(D_INIT, "S3: "); } BUGMSG2(D_INIT, "%lXh ", *shmem); if (check_mem_region(*shmem, BUFFER_SIZE)) { BUGMSG2(D_INIT_REASONS, "(check_mem_region)\n"); BUGMSG2(D_INIT_REASONS, "Stage 3: "); BUGLVL(D_INIT_REASONS) numprint = 0; *shmem = shmems[numshmems - 1]; numshmems--; shmem--; continue; } if (isa_readb(ptr) != TESTvalue) { BUGMSG2(D_INIT_REASONS, "(%02Xh != %02Xh)\n", isa_readb(ptr), TESTvalue); BUGMSG2(D_INIT_REASONS, "S3: "); BUGLVL(D_INIT_REASONS) numprint = 0; *shmem = shmems[numshmems - 1]; numshmems--; shmem--; continue; } /* By writing 0x42 to the TESTvalue location, we also make * sure no "mirror" shmem areas show up - if they occur * in another pass through this loop, they will be discarded * because *cptr != TESTvalue. */ isa_writeb(0x42, ptr); if (isa_readb(ptr) != 0x42) { BUGMSG2(D_INIT_REASONS, "(read only)\n"); BUGMSG2(D_INIT_REASONS, "S3: "); *shmem = shmems[numshmems - 1]; numshmems--; shmem--; continue; } BUGMSG2(D_INIT_REASONS, "\n"); BUGMSG2(D_INIT_REASONS, "S3: "); BUGLVL(D_INIT_REASONS) numprint = 0; } BUGMSG2(D_INIT, "\n"); if (!numshmems) { BUGMSG2(D_NORMAL, "S3: No ARCnet cards found.\n"); return -ENODEV; } /* Stage 4: something of a dummy, to report the shmems that are * still possible after stage 3. */ numprint = -1; for (shmem = &shmems[0]; shmem - shmems < numshmems; shmem++) { numprint++; numprint %= 8; if (!numprint) { BUGMSG2(D_INIT, "\n"); BUGMSG2(D_INIT, "S4: "); } BUGMSG2(D_INIT, "%lXh ", *shmem); } BUGMSG2(D_INIT, "\n"); /* Stage 5: for any ports that have the correct status, can disable * the RESET flag, and (if no irq is given) generate an autoirq, * register an ARCnet device. * * Currently, we can only register one device per probe, so quit * after the first one is found. */ numprint = -1; for (port = &ports[0]; port - ports < numports; port++) { numprint++; numprint %= 8; if (!numprint) { BUGMSG2(D_INIT, "\n"); BUGMSG2(D_INIT, "S5: "); } BUGMSG2(D_INIT, "%Xh ", *port); ioaddr = *port; status = ASTATUS(); if ((status & 0x9D) != (NORXflag | RECONflag | TXFREEflag | RESETflag)) { BUGMSG2(D_INIT_REASONS, "(status=%Xh)\n", status); BUGMSG2(D_INIT_REASONS, "S5: "); BUGLVL(D_INIT_REASONS) numprint = 0; *port = ports[numports - 1]; numports--; port--; continue; } ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear); status = ASTATUS(); if (status & RESETflag) { BUGMSG2(D_INIT_REASONS, " (eternal reset, status=%Xh)\n", status); BUGMSG2(D_INIT_REASONS, "S5: "); BUGLVL(D_INIT_REASONS) numprint = 0; *port = ports[numports - 1]; numports--; port--; continue; } /* skip this completely if an IRQ was given, because maybe * we're on a machine that locks during autoirq! */ if (!dev || !dev->irq) { /* if we do this, we're sure to get an IRQ since the * card has just reset and the NORXflag is on until * we tell it to start receiving. */ airqmask = probe_irq_on(); AINTMASK(NORXflag); udelay(1); AINTMASK(0); airq = probe_irq_off(airqmask); if (airq <= 0) { BUGMSG2(D_INIT_REASONS, "(airq=%d)\n", airq); BUGMSG2(D_INIT_REASONS, "S5: "); BUGLVL(D_INIT_REASONS) numprint = 0; *port = ports[numports - 1]; numports--; port--; continue; } } else { airq = dev->irq; } BUGMSG2(D_INIT, "(%d,", airq); openparen = 1; /* Everything seems okay. But which shmem, if any, puts * back its signature byte when the card is reset? * * If there are multiple cards installed, there might be * multiple shmems still in the list. */ #ifdef FAST_PROBE if (numports > 1 || numshmems > 1) { inb(_RESET); mdelay(RESETtime); } else { /* just one shmem and port, assume they match */ isa_writeb(TESTvalue, shmems[0]); } #else inb(_RESET); mdelay(RESETtime); #endif for (shmem = &shmems[0]; shmem - shmems < numshmems; shmem++) { u_long ptr = *shmem; if (isa_readb(ptr) == TESTvalue) { /* found one */ BUGMSG2(D_INIT, "%lXh)\n", *shmem); openparen = 0; /* register the card */ retval = com90xx_found(dev, *port, airq, *shmem); numprint = -1; /* remove shmem from the list */ *shmem = shmems[numshmems - 1]; numshmems--; break; /* go to the next I/O port */ } else { BUGMSG2(D_INIT_REASONS, "%Xh-", isa_readb(ptr)); } } if (openparen) { BUGLVL(D_INIT) printk("no matching shmem)\n"); BUGLVL(D_INIT_REASONS) printk("S5: "); BUGLVL(D_INIT_REASONS) numprint = 0; } *port = ports[numports - 1]; numports--; port--; } BUGLVL(D_INIT_REASONS) printk("\n"); /* Now put back TESTvalue on all leftover shmems. */ for (shmem = &shmems[0]; shmem - shmems < numshmems; shmem++) isa_writeb(TESTvalue, *shmem); if (retval && dev && !numcards) BUGMSG2(D_NORMAL, "S5: No ARCnet cards found.\n"); return retval; } /* Set up the struct net_device associated with this card. Called after * probing succeeds. */ static int __init com90xx_found(struct net_device *dev0, int ioaddr, int airq, u_long shmem) { struct net_device *dev = dev0; struct arcnet_local *lp; u_long first_mirror, last_mirror; int mirror_size, err; /* allocate struct net_device if we don't have one yet */ if (!dev && !(dev = dev_alloc("arc%d", &err))) { BUGMSG2(D_NORMAL, "com90xx: Can't allocate device!\n"); return err; } lp = dev->priv = kmalloc(sizeof(struct arcnet_local), GFP_KERNEL); if (!lp) { BUGMSG(D_NORMAL, "Can't allocate device data!\n"); goto err_free_dev; } /* find the real shared memory start/end points, including mirrors */ /* guess the actual size of one "memory mirror" - the number of * bytes between copies of the shared memory. On most cards, it's * 2k (or there are no mirrors at all) but on some, it's 4k. */ mirror_size = MIRROR_SIZE; if (isa_readb(shmem) == TESTvalue && isa_readb(shmem - mirror_size) != TESTvalue && isa_readb(shmem - 2 * mirror_size) == TESTvalue) mirror_size *= 2; first_mirror = last_mirror = shmem; while (isa_readb(first_mirror) == TESTvalue) first_mirror -= mirror_size; first_mirror += mirror_size; while (isa_readb(last_mirror) == TESTvalue) last_mirror += mirror_size; last_mirror -= mirror_size; dev->mem_start = first_mirror; dev->mem_end = last_mirror + MIRROR_SIZE - 1; dev->rmem_start = dev->mem_start + BUFFER_SIZE * 0; dev->rmem_end = dev->mem_start + BUFFER_SIZE * 2 - 1; /* Initialize the rest of the device structure. */ memset(lp, 0, sizeof(struct arcnet_local)); lp->card_name = "COM90xx"; lp->hw.command = com90xx_command; lp->hw.status = com90xx_status; lp->hw.intmask = com90xx_setmask; lp->hw.reset = com90xx_reset; lp->hw.open_close = com90xx_openclose; lp->hw.copy_to_card = com90xx_copy_to_card; lp->hw.copy_from_card = com90xx_copy_from_card; lp->mem_start = ioremap(dev->mem_start, dev->mem_end - dev->mem_start + 1); if (!lp->mem_start) { BUGMSG(D_NORMAL, "Can't remap device memory!\n"); goto err_free_dev_priv; } /* Fill in the fields of the device structure with generic values. */ arcdev_setup(dev); /* get and check the station ID from offset 1 in shmem */ dev->dev_addr[0] = readb(lp->mem_start + 1); /* reserve the irq */ if (request_irq(airq, &arcnet_interrupt, 0, "arcnet (90xx)", dev)) { BUGMSG(D_NORMAL, "Can't get IRQ %d!\n", airq); goto err_unmap; } dev->irq = airq; /* reserve the I/O and memory regions - guaranteed to work by check_region */ request_region(ioaddr, ARCNET_TOTAL_SIZE, "arcnet (90xx)"); request_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1, "arcnet (90xx)"); dev->base_addr = ioaddr; BUGMSG(D_NORMAL, "COM90xx station %02Xh found at %03lXh, IRQ %d, " "ShMem %lXh (%ld*%xh).\n", dev->dev_addr[0], dev->base_addr, dev->irq, dev->mem_start, (dev->mem_end - dev->mem_start + 1) / mirror_size, mirror_size); if (!dev0 && register_netdev(dev)) goto err_release; cards[numcards++] = dev; return 0; err_release: free_irq(dev->irq, dev); release_region(dev->base_addr, ARCNET_TOTAL_SIZE); release_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1); err_unmap: iounmap(lp->mem_start); err_free_dev_priv: kfree(dev->priv); err_free_dev: if (!dev0) kfree(dev); return -EIO; } static void com90xx_command(struct net_device *dev, int cmd) { short ioaddr = dev->base_addr; ACOMMAND(cmd); } static int com90xx_status(struct net_device *dev) { short ioaddr = dev->base_addr; return ASTATUS(); } static void com90xx_setmask(struct net_device *dev, int mask) { short ioaddr = dev->base_addr; AINTMASK(mask); } /* * Do a hardware reset on the card, and set up necessary registers. * * This should be called as little as possible, because it disrupts the * token on the network (causes a RECON) and requires a significant delay. * * However, it does make sure the card is in a defined state. */ int com90xx_reset(struct net_device *dev, int really_reset) { struct arcnet_local *lp = (struct arcnet_local *) dev->priv; short ioaddr = dev->base_addr; BUGMSG(D_INIT, "Resetting (status=%02Xh)\n", ASTATUS()); if (really_reset) { /* reset the card */ inb(_RESET); mdelay(RESETtime); } ACOMMAND(CFLAGScmd | RESETclear); /* clear flags & end reset */ ACOMMAND(CFLAGScmd | CONFIGclear); /* don't do this until we verify that it doesn't hurt older cards! */ /* outb(inb(_CONFIG) | ENABLE16flag, _CONFIG); */ /* verify that the ARCnet signature byte is present */ if (readb(lp->mem_start) != TESTvalue) { if (really_reset) BUGMSG(D_NORMAL, "reset failed: TESTvalue not present.\n"); return 1; } /* enable extended (512-byte) packets */ ACOMMAND(CONFIGcmd | EXTconf); /* clean out all the memory to make debugging make more sense :) */ BUGLVL(D_DURING) memset_io(lp->mem_start, 0x42, 2048); /* done! return success. */ return 0; } static void com90xx_openclose(struct net_device *dev, bool open) { if (open) MOD_INC_USE_COUNT; else MOD_DEC_USE_COUNT; } static void com90xx_copy_to_card(struct net_device *dev, int bufnum, int offset, void *buf, int count) { struct arcnet_local *lp = (struct arcnet_local *) dev->priv; void *memaddr = lp->mem_start + bufnum * 512 + offset; TIME("memcpy_toio", count, memcpy_toio(memaddr, buf, count)); } static void com90xx_copy_from_card(struct net_device *dev, int bufnum, int offset, void *buf, int count) { struct arcnet_local *lp = (struct arcnet_local *) dev->priv; void *memaddr = lp->mem_start + bufnum * 512 + offset; TIME("memcpy_fromio", count, memcpy_fromio(buf, memaddr, count)); } #ifdef MODULE /* Module parameters */ static int io; /* use the insmod io= irq= shmem= options */ static int irq; static int shmem; static char *device; /* use eg. device=arc1 to change name */ MODULE_PARM(io, "i"); MODULE_PARM(irq, "i"); MODULE_PARM(shmem, "i"); MODULE_PARM(device, "s"); int init_module(void) { struct net_device *dev; int err; if (io || irq || shmem || device) { dev = dev_alloc(device ? : "arc%d", &err); if (!dev) return err; dev->base_addr = io; dev->irq = irq; if (dev->irq == 2) dev->irq = 9; dev->mem_start = shmem; com90xx_probe(dev); } else com90xx_probe(NULL); if (!numcards) return -EIO; return 0; } void cleanup_module(void) { struct net_device *dev; struct arcnet_local *lp; int count; for (count = 0; count < numcards; count++) { dev = cards[count]; lp = (struct arcnet_local *) dev->priv; unregister_netdev(dev); free_irq(dev->irq, dev); iounmap(lp->mem_start); release_region(dev->base_addr, ARCNET_TOTAL_SIZE); release_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1); kfree(dev->priv); kfree(dev); } } #else static int __init com90xx_setup(char *s) { struct net_device *dev; int ints[8]; com90xx_skip_probe = 1; s = get_options(s, 8, ints); if (!ints[0] && !*s) { printk("com90xx: Disabled.\n"); return 1; } dev = alloc_bootmem(sizeof(struct net_device)); memset(dev, 0, sizeof(struct net_device)); dev->init = com90xx_probe; switch (ints[0]) { default: /* ERROR */ printk("com90xx: Too many arguments.\n"); case 3: /* Mem address */ dev->mem_start = ints[3]; case 2: /* IRQ */ dev->irq = ints[2]; case 1: /* IO address */ dev->base_addr = ints[1]; } if (*s) strncpy(dev->name, s, 9); else strcpy(dev->name, "arc%d"); if (register_netdev(dev)) printk(KERN_ERR "com90xx: Cannot register arcnet device\n"); return 1; } __setup("com90xx=", com90xx_setup); #endif /* MODULE */