/* * USB HandSpring Visor, Palm m50x, and Sony Clie driver * (supports all of the Palm OS USB devices) * * Copyright (C) 1999 - 2001 * Greg Kroah-Hartman (greg@kroah.com) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * See Documentation/usb/usb-serial.txt for more information on using this driver * * (11/11/2001) gkh * Added support for the m125 devices, and added check to prevent oopses * for Cli‰ devices that lie about the number of ports they have. * * (08/30/2001) gkh * Added support for the Clie devices, both the 3.5 and 4.0 os versions. * Many thanks to Daniel Burke, and Bryan Payne for helping with this. * * (08/23/2001) gkh * fixed a few potential bugs pointed out by Oliver Neukum. * * (05/30/2001) gkh * switched from using spinlock to a semaphore, which fixes lots of problems. * * (05/28/2000) gkh * Added initial support for the Palm m500 and Palm m505 devices. * * (04/08/2001) gb * Identify version on module load. * * (01/21/2000) gkh * Added write_room and chars_in_buffer, as they were previously using the * generic driver versions which is all wrong now that we are using an urb * pool. Thanks to Wolfgang Grandegger for pointing this out to me. * Removed count assignment in the write function, which was not needed anymore * either. Thanks to Al Borchers for pointing this out. * * (12/12/2000) gkh * Moved MOD_DEC to end of visor_close to be nicer, as the final write * message can sleep. * * (11/12/2000) gkh * Fixed bug with data being dropped on the floor by forcing tty->low_latency * to be on. Hopefully this fixes the OHCI issue! * * (11/01/2000) Adam J. Richter * usb_device_id table support * * (10/05/2000) gkh * Fixed bug with urb->dev not being set properly, now that the usb * core needs it. * * (09/11/2000) gkh * Got rid of always calling kmalloc for every urb we wrote out to the * device. * Added visor_read_callback so we can keep track of bytes in and out for * those people who like to know the speed of their device. * Removed DEBUG #ifdefs with call to usb_serial_debug_data * * (09/06/2000) gkh * Fixed oops in visor_exit. Need to uncomment usb_unlink_urb call _after_ * the host controller drivers set urb->dev = NULL when the urb is finished. * * (08/28/2000) gkh * Added locks for SMP safeness. * * (08/08/2000) gkh * Fixed endian problem in visor_startup. * Fixed MOD_INC and MOD_DEC logic and the ability to open a port more * than once. * * (07/23/2000) gkh * Added pool of write urbs to speed up transfers to the visor. * * (07/19/2000) gkh * Added module_init and module_exit functions to handle the fact that this * driver is a loadable module now. * * (07/03/2000) gkh * Added visor_set_ioctl and visor_set_termios functions (they don't do much * of anything, but are good for debugging.) * * (06/25/2000) gkh * Fixed bug in visor_unthrottle that should help with the disconnect in PPP * bug that people have been reporting. * * (06/23/2000) gkh * Cleaned up debugging statements in a quest to find UHCI timeout bug. * * (04/27/2000) Ryan VanderBijl * Fixed memory leak in visor_close * * (03/26/2000) gkh * Split driver up into device specific pieces. * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef CONFIG_USB_SERIAL_DEBUG static int debug = 1; #else static int debug; #endif #include "usb-serial.h" #include "visor.h" /* * Version Information */ #define DRIVER_VERSION "v1.5" #define DRIVER_AUTHOR "Greg Kroah-Hartman " #define DRIVER_DESC "USB HandSpring Visor, Palm m50x, Sony Cli‰ driver" /* function prototypes for a handspring visor */ static int visor_open (struct usb_serial_port *port, struct file *filp); static void visor_close (struct usb_serial_port *port, struct file *filp); static int visor_write (struct usb_serial_port *port, int from_user, const unsigned char *buf, int count); static int visor_write_room (struct usb_serial_port *port); static int visor_chars_in_buffer (struct usb_serial_port *port); static void visor_throttle (struct usb_serial_port *port); static void visor_unthrottle (struct usb_serial_port *port); static int visor_startup (struct usb_serial *serial); static void visor_shutdown (struct usb_serial *serial); static int visor_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg); static void visor_set_termios (struct usb_serial_port *port, struct termios *old_termios); static void visor_write_bulk_callback (struct urb *urb); static void visor_read_bulk_callback (struct urb *urb); static __devinitdata struct usb_device_id visor_id_table [] = { { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID) }, { } /* Terminating entry */ }; static __devinitdata struct usb_device_id palm_4_0_id_table [] = { { USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID) }, { USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID) }, { USB_DEVICE(PALM_VENDOR_ID, PALM_M125_ID) }, { } /* Terminating entry */ }; static __devinitdata struct usb_device_id clie_id_3_5_table [] = { { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_3_5_ID) }, { } /* Terminating entry */ }; static __devinitdata struct usb_device_id clie_id_4_0_table [] = { { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_0_ID) }, { } /* Terminating entry */ }; static __devinitdata struct usb_device_id id_table [] = { { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID) }, { USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID) }, { USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID) }, { USB_DEVICE(PALM_VENDOR_ID, PALM_M125_ID) }, { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_3_5_ID) }, { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_0_ID) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE (usb, id_table); /* All of the device info needed for the Handspring Visor */ static struct usb_serial_device_type handspring_device = { name: "Handspring Visor", id_table: visor_id_table, needs_interrupt_in: MUST_HAVE_NOT, /* this device must not have an interrupt in endpoint */ needs_bulk_in: MUST_HAVE, /* this device must have a bulk in endpoint */ needs_bulk_out: MUST_HAVE, /* this device must have a bulk out endpoint */ num_interrupt_in: 0, num_bulk_in: 2, num_bulk_out: 2, num_ports: 2, open: visor_open, close: visor_close, throttle: visor_throttle, unthrottle: visor_unthrottle, startup: visor_startup, shutdown: visor_shutdown, ioctl: visor_ioctl, set_termios: visor_set_termios, write: visor_write, write_room: visor_write_room, chars_in_buffer: visor_chars_in_buffer, write_bulk_callback: visor_write_bulk_callback, read_bulk_callback: visor_read_bulk_callback, }; /* device info for the Palm 4.0 devices */ static struct usb_serial_device_type palm_4_0_device = { name: "Palm 4.0", id_table: palm_4_0_id_table, needs_interrupt_in: MUST_HAVE_NOT, /* this device must not have an interrupt in endpoint */ needs_bulk_in: MUST_HAVE, /* this device must have a bulk in endpoint */ needs_bulk_out: MUST_HAVE, /* this device must have a bulk out endpoint */ num_interrupt_in: 0, num_bulk_in: 2, num_bulk_out: 2, num_ports: 2, open: visor_open, close: visor_close, throttle: visor_throttle, unthrottle: visor_unthrottle, startup: visor_startup, shutdown: visor_shutdown, ioctl: visor_ioctl, set_termios: visor_set_termios, write: visor_write, write_room: visor_write_room, chars_in_buffer: visor_chars_in_buffer, write_bulk_callback: visor_write_bulk_callback, read_bulk_callback: visor_read_bulk_callback, }; /* device info for the Sony Clie OS version 3.5 */ static struct usb_serial_device_type clie_3_5_device = { name: "Sony Cli‰ 3.5", id_table: clie_id_3_5_table, needs_interrupt_in: MUST_HAVE_NOT, /* this device must not have an interrupt in endpoint */ needs_bulk_in: MUST_HAVE, /* this device must have a bulk in endpoint */ needs_bulk_out: MUST_HAVE, /* this device must have a bulk out endpoint */ num_interrupt_in: 0, num_bulk_in: 1, num_bulk_out: 1, num_ports: 1, open: visor_open, close: visor_close, throttle: visor_throttle, unthrottle: visor_unthrottle, ioctl: visor_ioctl, set_termios: visor_set_termios, write: visor_write, write_room: visor_write_room, chars_in_buffer: visor_chars_in_buffer, write_bulk_callback: visor_write_bulk_callback, read_bulk_callback: visor_read_bulk_callback, }; /* device info for the Sony Clie OS version 4.0 */ static struct usb_serial_device_type clie_4_0_device = { name: "Sony Cli‰ 4.0", id_table: clie_id_4_0_table, needs_interrupt_in: MUST_HAVE_NOT, /* this device must not have an interrupt in endpoint */ needs_bulk_in: MUST_HAVE, /* this device must have a bulk in endpoint */ needs_bulk_out: MUST_HAVE, /* this device must have a bulk out endpoint */ num_interrupt_in: 0, num_bulk_in: 2, num_bulk_out: 2, num_ports: 2, open: visor_open, close: visor_close, throttle: visor_throttle, unthrottle: visor_unthrottle, startup: visor_startup, shutdown: visor_shutdown, ioctl: visor_ioctl, set_termios: visor_set_termios, write: visor_write, write_room: visor_write_room, chars_in_buffer: visor_chars_in_buffer, write_bulk_callback: visor_write_bulk_callback, read_bulk_callback: visor_read_bulk_callback, }; #define NUM_URBS 24 #define URB_TRANSFER_BUFFER_SIZE 768 static struct urb *write_urb_pool[NUM_URBS]; static spinlock_t write_urb_pool_lock; static int bytes_in; static int bytes_out; /****************************************************************************** * Handspring Visor specific driver functions ******************************************************************************/ static int visor_open (struct usb_serial_port *port, struct file *filp) { struct usb_serial *serial = port->serial; int result = 0; if (port_paranoia_check (port, __FUNCTION__)) return -ENODEV; dbg(__FUNCTION__ " - port %d", port->number); if (!port->read_urb) { err ("Device lied about number of ports, please use a lower one."); return -ENODEV; } down (&port->sem); ++port->open_count; MOD_INC_USE_COUNT; if (!port->active) { port->active = 1; bytes_in = 0; bytes_out = 0; /* force low_latency on so that our tty_push actually forces the data through, otherwise it is scheduled, and with high data rates (like with OHCI) data can get lost. */ port->tty->low_latency = 1; /* Start reading from the device */ FILL_BULK_URB(port->read_urb, serial->dev, usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress), port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length, visor_read_bulk_callback, port); result = usb_submit_urb(port->read_urb); if (result) err(__FUNCTION__ " - failed submitting read urb, error %d", result); } up (&port->sem); return result; } static void visor_close (struct usb_serial_port *port, struct file * filp) { struct usb_serial *serial; unsigned char *transfer_buffer; if (port_paranoia_check (port, __FUNCTION__)) return; dbg(__FUNCTION__ " - port %d", port->number); serial = get_usb_serial (port, __FUNCTION__); if (!serial) return; down (&port->sem); --port->open_count; if (port->open_count <= 0) { if (serial->dev) { /* only send a shutdown message if the * device is still here */ transfer_buffer = kmalloc (0x12, GFP_KERNEL); if (!transfer_buffer) { err(__FUNCTION__ " - kmalloc(%d) failed.", 0x12); } else { /* send a shutdown message to the device */ usb_control_msg (serial->dev, usb_rcvctrlpipe(serial->dev, 0), VISOR_CLOSE_NOTIFICATION, 0xc2, 0x0000, 0x0000, transfer_buffer, 0x12, 300); kfree (transfer_buffer); } /* shutdown our bulk read */ usb_unlink_urb (port->read_urb); } port->active = 0; port->open_count = 0; } up (&port->sem); /* Uncomment the following line if you want to see some statistics in your syslog */ /* info ("Bytes In = %d Bytes Out = %d", bytes_in, bytes_out); */ MOD_DEC_USE_COUNT; } static int visor_write (struct usb_serial_port *port, int from_user, const unsigned char *buf, int count) { struct usb_serial *serial = port->serial; struct urb *urb; const unsigned char *current_position = buf; unsigned long flags; int status; int i; int bytes_sent = 0; int transfer_size; dbg(__FUNCTION__ " - port %d", port->number); while (count > 0) { /* try to find a free urb in our list of them */ urb = NULL; spin_lock_irqsave (&write_urb_pool_lock, flags); for (i = 0; i < NUM_URBS; ++i) { if (write_urb_pool[i]->status != -EINPROGRESS) { urb = write_urb_pool[i]; break; } } spin_unlock_irqrestore (&write_urb_pool_lock, flags); if (urb == NULL) { dbg (__FUNCTION__ " - no more free urbs"); goto exit; } if (urb->transfer_buffer == NULL) { urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); if (urb->transfer_buffer == NULL) { err(__FUNCTION__" no more kernel memory..."); goto exit; } } transfer_size = min (count, URB_TRANSFER_BUFFER_SIZE); if (from_user) { if (copy_from_user (urb->transfer_buffer, current_position, transfer_size)) { bytes_sent = -EFAULT; break; } } else { memcpy (urb->transfer_buffer, current_position, transfer_size); } usb_serial_debug_data (__FILE__, __FUNCTION__, transfer_size, urb->transfer_buffer); /* build up our urb */ FILL_BULK_URB (urb, serial->dev, usb_sndbulkpipe(serial->dev, port->bulk_out_endpointAddress), urb->transfer_buffer, transfer_size, visor_write_bulk_callback, port); urb->transfer_flags |= USB_QUEUE_BULK; /* send it down the pipe */ status = usb_submit_urb(urb); if (status) { err(__FUNCTION__ " - usb_submit_urb(write bulk) failed with status = %d", status); bytes_sent = status; break; } current_position += transfer_size; bytes_sent += transfer_size; count -= transfer_size; bytes_out += transfer_size; } exit: return bytes_sent; } static int visor_write_room (struct usb_serial_port *port) { unsigned long flags; int i; int room = 0; dbg(__FUNCTION__ " - port %d", port->number); spin_lock_irqsave (&write_urb_pool_lock, flags); for (i = 0; i < NUM_URBS; ++i) { if (write_urb_pool[i]->status != -EINPROGRESS) { room += URB_TRANSFER_BUFFER_SIZE; } } spin_unlock_irqrestore (&write_urb_pool_lock, flags); dbg(__FUNCTION__ " - returns %d", room); return (room); } static int visor_chars_in_buffer (struct usb_serial_port *port) { unsigned long flags; int i; int chars = 0; dbg(__FUNCTION__ " - port %d", port->number); spin_lock_irqsave (&write_urb_pool_lock, flags); for (i = 0; i < NUM_URBS; ++i) { if (write_urb_pool[i]->status == -EINPROGRESS) { chars += URB_TRANSFER_BUFFER_SIZE; } } spin_unlock_irqrestore (&write_urb_pool_lock, flags); dbg (__FUNCTION__ " - returns %d", chars); return (chars); } static void visor_write_bulk_callback (struct urb *urb) { struct usb_serial_port *port = (struct usb_serial_port *)urb->context; if (port_paranoia_check (port, __FUNCTION__)) return; dbg(__FUNCTION__ " - port %d", port->number); if (urb->status) { dbg(__FUNCTION__ " - nonzero write bulk status received: %d", urb->status); return; } queue_task(&port->tqueue, &tq_immediate); mark_bh(IMMEDIATE_BH); return; } static void visor_read_bulk_callback (struct urb *urb) { struct usb_serial_port *port = (struct usb_serial_port *)urb->context; struct usb_serial *serial = get_usb_serial (port, __FUNCTION__); struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; int i; int result; if (port_paranoia_check (port, __FUNCTION__)) return; dbg(__FUNCTION__ " - port %d", port->number); if (!serial) { dbg(__FUNCTION__ " - bad serial pointer, exiting"); return; } if (urb->status) { dbg(__FUNCTION__ " - nonzero read bulk status received: %d", urb->status); return; } usb_serial_debug_data (__FILE__, __FUNCTION__, urb->actual_length, data); tty = port->tty; if (urb->actual_length) { for (i = 0; i < urb->actual_length ; ++i) { /* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */ if(tty->flip.count >= TTY_FLIPBUF_SIZE) { tty_flip_buffer_push(tty); } /* this doesn't actually push the data through unless tty->low_latency is set */ tty_insert_flip_char(tty, data[i], 0); } tty_flip_buffer_push(tty); bytes_in += urb->actual_length; } /* Continue trying to always read */ FILL_BULK_URB(port->read_urb, serial->dev, usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress), port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length, visor_read_bulk_callback, port); result = usb_submit_urb(port->read_urb); if (result) err(__FUNCTION__ " - failed resubmitting read urb, error %d", result); return; } static void visor_throttle (struct usb_serial_port *port) { dbg(__FUNCTION__ " - port %d", port->number); down (&port->sem); usb_unlink_urb (port->read_urb); up (&port->sem); return; } static void visor_unthrottle (struct usb_serial_port *port) { int result; dbg(__FUNCTION__ " - port %d", port->number); down (&port->sem); port->read_urb->dev = port->serial->dev; result = usb_submit_urb(port->read_urb); if (result) err(__FUNCTION__ " - failed submitting read urb, error %d", result); up (&port->sem); return; } static int visor_startup (struct usb_serial *serial) { int response; int i; unsigned char *transfer_buffer = kmalloc (256, GFP_KERNEL); if (!transfer_buffer) { err(__FUNCTION__ " - kmalloc(%d) failed.", 256); return -ENOMEM; } dbg(__FUNCTION__); dbg(__FUNCTION__ " - Set config to 1"); usb_set_configuration (serial->dev, 1); /* send a get connection info request */ response = usb_control_msg (serial->dev, usb_rcvctrlpipe(serial->dev, 0), VISOR_GET_CONNECTION_INFORMATION, 0xc2, 0x0000, 0x0000, transfer_buffer, 0x12, 300); if (response < 0) { err(__FUNCTION__ " - error getting connection information"); } else { struct visor_connection_info *connection_info = (struct visor_connection_info *)transfer_buffer; char *string; le16_to_cpus(&connection_info->num_ports); info("%s: Number of ports: %d", serial->type->name, connection_info->num_ports); for (i = 0; i < connection_info->num_ports; ++i) { switch (connection_info->connections[i].port_function_id) { case VISOR_FUNCTION_GENERIC: string = "Generic"; break; case VISOR_FUNCTION_DEBUGGER: string = "Debugger"; break; case VISOR_FUNCTION_HOTSYNC: string = "HotSync"; break; case VISOR_FUNCTION_CONSOLE: string = "Console"; break; case VISOR_FUNCTION_REMOTE_FILE_SYS: string = "Remote File System"; break; default: string = "unknown"; break; } info("%s: port %d, is for %s use and is bound to ttyUSB%d", serial->type->name, connection_info->connections[i].port, string, serial->minor + i); } } if ((serial->dev->descriptor.idVendor == PALM_VENDOR_ID) || (serial->dev->descriptor.idVendor == SONY_VENDOR_ID)) { /* Palm OS 4.0 Hack */ response = usb_control_msg (serial->dev, usb_rcvctrlpipe(serial->dev, 0), PALM_GET_SOME_UNKNOWN_INFORMATION, 0xc2, 0x0000, 0x0000, transfer_buffer, 0x14, 300); if (response < 0) { err(__FUNCTION__ " - error getting first unknown palm command"); } else { usb_serial_debug_data (__FILE__, __FUNCTION__, 0x14, transfer_buffer); } response = usb_control_msg (serial->dev, usb_rcvctrlpipe(serial->dev, 0), PALM_GET_SOME_UNKNOWN_INFORMATION, 0xc2, 0x0000, 0x0000, transfer_buffer, 0x14, 300); if (response < 0) { err(__FUNCTION__ " - error getting second unknown palm command"); } else { usb_serial_debug_data (__FILE__, __FUNCTION__, 0x14, transfer_buffer); } } /* ask for the number of bytes available, but ignore the response as it is broken */ response = usb_control_msg (serial->dev, usb_rcvctrlpipe(serial->dev, 0), VISOR_REQUEST_BYTES_AVAILABLE, 0xc2, 0x0000, 0x0005, transfer_buffer, 0x02, 300); if (response < 0) { err(__FUNCTION__ " - error getting bytes available request"); } kfree (transfer_buffer); /* continue on with initialization */ return 0; } static void visor_shutdown (struct usb_serial *serial) { int i; dbg (__FUNCTION__); /* stop reads and writes on all ports */ for (i=0; i < serial->num_ports; ++i) { serial->port[i].active = 0; serial->port[i].open_count = 0; } } static int visor_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg) { dbg(__FUNCTION__ " - port %d, cmd 0x%.4x", port->number, cmd); return -ENOIOCTLCMD; } /* This function is all nice and good, but we don't change anything based on it :) */ static void visor_set_termios (struct usb_serial_port *port, struct termios *old_termios) { unsigned int cflag; dbg(__FUNCTION__ " - port %d", port->number); if ((!port->tty) || (!port->tty->termios)) { dbg(__FUNCTION__" - no tty structures"); return; } cflag = port->tty->termios->c_cflag; /* check that they really want us to change something */ if (old_termios) { if ((cflag == old_termios->c_cflag) && (RELEVANT_IFLAG(port->tty->termios->c_iflag) == RELEVANT_IFLAG(old_termios->c_iflag))) { dbg(__FUNCTION__ " - nothing to change..."); return; } } /* get the byte size */ switch (cflag & CSIZE) { case CS5: dbg(__FUNCTION__ " - data bits = 5"); break; case CS6: dbg(__FUNCTION__ " - data bits = 6"); break; case CS7: dbg(__FUNCTION__ " - data bits = 7"); break; default: case CS8: dbg(__FUNCTION__ " - data bits = 8"); break; } /* determine the parity */ if (cflag & PARENB) if (cflag & PARODD) dbg(__FUNCTION__ " - parity = odd"); else dbg(__FUNCTION__ " - parity = even"); else dbg(__FUNCTION__ " - parity = none"); /* figure out the stop bits requested */ if (cflag & CSTOPB) dbg(__FUNCTION__ " - stop bits = 2"); else dbg(__FUNCTION__ " - stop bits = 1"); /* figure out the flow control settings */ if (cflag & CRTSCTS) dbg(__FUNCTION__ " - RTS/CTS is enabled"); else dbg(__FUNCTION__ " - RTS/CTS is disabled"); /* determine software flow control */ if (I_IXOFF(port->tty)) dbg(__FUNCTION__ " - XON/XOFF is enabled, XON = %2x, XOFF = %2x", START_CHAR(port->tty), STOP_CHAR(port->tty)); else dbg(__FUNCTION__ " - XON/XOFF is disabled"); /* get the baud rate wanted */ dbg(__FUNCTION__ " - baud rate = %d", tty_get_baud_rate(port->tty)); return; } static int __init visor_init (void) { struct urb *urb; int i; usb_serial_register (&handspring_device); usb_serial_register (&palm_4_0_device); usb_serial_register (&clie_3_5_device); usb_serial_register (&clie_4_0_device); /* create our write urb pool and transfer buffers */ spin_lock_init (&write_urb_pool_lock); for (i = 0; i < NUM_URBS; ++i) { urb = usb_alloc_urb(0); write_urb_pool[i] = urb; if (urb == NULL) { err("No more urbs???"); continue; } urb->transfer_buffer = NULL; urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); if (!urb->transfer_buffer) { err (__FUNCTION__ " - out of memory for urb buffers."); continue; } } info(DRIVER_DESC " " DRIVER_VERSION); return 0; } static void __exit visor_exit (void) { int i; unsigned long flags; usb_serial_deregister (&handspring_device); usb_serial_deregister (&palm_4_0_device); usb_serial_deregister (&clie_3_5_device); usb_serial_deregister (&clie_4_0_device); spin_lock_irqsave (&write_urb_pool_lock, flags); for (i = 0; i < NUM_URBS; ++i) { if (write_urb_pool[i]) { /* FIXME - uncomment the following usb_unlink_urb call when * the host controllers get fixed to set urb->dev = NULL after * the urb is finished. Otherwise this call oopses. */ /* usb_unlink_urb(write_urb_pool[i]); */ if (write_urb_pool[i]->transfer_buffer) kfree(write_urb_pool[i]->transfer_buffer); usb_free_urb (write_urb_pool[i]); } } spin_unlock_irqrestore (&write_urb_pool_lock, flags); } module_init(visor_init); module_exit(visor_exit); MODULE_AUTHOR( DRIVER_AUTHOR ); MODULE_DESCRIPTION( DRIVER_DESC ); MODULE_LICENSE("GPL"); MODULE_PARM(debug, "i"); MODULE_PARM_DESC(debug, "Debug enabled or not");