/******************************************************************************
**
** FILE NAME    : ar9_ref_board.c
** PROJECT      : IFX UEIP
** MODULES      : BSP Basic
**
** DATE         : 27 May 2009
** AUTHOR       : Xu Liang
** DESCRIPTION  : source file for AR9
** COPYRIGHT    :       Copyright (c) 2009
**                      Infineon Technologies AG
**                      Am Campeon 1-12, 85579 Neubiberg, Germany
**
**    This program is free software; you can redistribute it and/or modify
**    it under the terms of the GNU General Public License as published by
**    the Free Software Foundation; either version 2 of the License, or
**    (at your option) any later version.
**
** HISTORY
** $Date        $Author         $Comment
** 27 May 2009   Xu Liang        The first UEIP release
*******************************************************************************/



#include <linux/module.h>
#include <linux/types.h>
#include <linux/kallsyms.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>

#include <ifx_regs.h>
#include <ifx_types.h>
#include <ifx_board.h>
#include <irq.h>
#include <ifx_gpio.h>
#include <ifx_ledc.h>
#include <ifx_led.h>


struct ifx_si_eiu_config g_si_eiu_config = {
    .irq            = -1,   //  no serial input
    .intsync        = 0,
    .sampling_clk   = 0,
    .shift_clk      = 0,
    .group          = 0,
    .active_high    = 0,
};

//  GPIO PIN to Module Mapping and default PIN configuration
struct ifx_gpio_ioctl_pin_config g_board_gpio_pin_map[] = {
    /*
     *  ASC0 (not used in refernce board, pin-9 is assigned to GPHY)
     */
//    {IFX_GPIO_MODULE_ASC0, IFX_GPIO_PIN_ID(0,  9), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET},
//    {IFX_GPIO_MODULE_ASC0, IFX_GPIO_PIN_ID(0, 10), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_IN | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR},
//    {IFX_GPIO_MODULE_ASC0, IFX_GPIO_PIN_ID(0, 11), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_IN | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR},
//    {IFX_GPIO_MODULE_ASC0, IFX_GPIO_PIN_ID(0, 12), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET},

    /*
     *  SSC (SPI)
     */
    {IFX_GPIO_MODULE_SSC, IFX_GPIO_PIN_ID(1, 0), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_IN | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR},
    {IFX_GPIO_MODULE_SSC, IFX_GPIO_PIN_ID(1, 1), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET},
    {IFX_GPIO_MODULE_SSC, IFX_GPIO_PIN_ID(1, 2), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET},

    {IFX_GPIO_MODULE_SPI_FLASH, IFX_GPIO_PIN_ID(0, 10), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_SET | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET},

#ifdef CONFIG_IFX_LEDC
    /*
     *  IFX LED Controller
     */
    {IFX_GPIO_MODULE_LEDC, IFX_GPIO_PIN_ID(0, 4), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET},
    {IFX_GPIO_MODULE_LEDC, IFX_GPIO_PIN_ID(0, 5), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET},
    {IFX_GPIO_MODULE_LEDC, IFX_GPIO_PIN_ID(0, 6), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET},
#else /*--- #ifdef CONFIG_IFX_LEDC ---*/
/*------------------------------------------------------------------------------------------*\
    LED GPIO: 2,3 - 2,5 - 2,6 - 2,12 - 2,13 - 2,15  (alle aktive low)
    Taster:   0,1 WLAN (aktive low) - 0,2 DECT (aktive low)
\*------------------------------------------------------------------------------------------*/
    /* TEST PIN */
    /*--- {IFX_GPIO_MODULE_LED,  IFX_GPIO_PIN_ID(0, 3),  IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET }, ---*/
    /* LEDs */
    {IFX_GPIO_MODULE_LED,  IFX_GPIO_PIN_ID(2, 3),  IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OUTPUT_SET},
    {IFX_GPIO_MODULE_LED,  IFX_GPIO_PIN_ID(2, 5),  IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OUTPUT_SET},
    {IFX_GPIO_MODULE_LED,  IFX_GPIO_PIN_ID(2, 6),  IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OUTPUT_SET},
    {IFX_GPIO_MODULE_LED,  IFX_GPIO_PIN_ID(2, 15), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OUTPUT_SET},
    {IFX_GPIO_MODULE_LED,  IFX_GPIO_PIN_ID(2, 12), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OUTPUT_SET},
    {IFX_GPIO_MODULE_LED,  IFX_GPIO_PIN_ID(2, 13), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OUTPUT_SET},
#endif /*--- #else ---*/ /*--- #ifdef CONFIG_IFX_LEDC ---*/

    /* Taster (WLAN & DECT) */
    {IFX_GPIO_MODULE_LED,  IFX_GPIO_PIN_ID(0, 1),  IFX_GPIO_IOCTL_PIN_CONFIG_DIR_IN | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR },
    {IFX_GPIO_MODULE_LED,  IFX_GPIO_PIN_ID(0, 2),  IFX_GPIO_IOCTL_PIN_CONFIG_DIR_IN | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR },
    /* EXT0 */
    /*--- {IFX_GPIO_MODULE_EXIN,  IFX_GPIO_PIN_ID(1, 13), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_IN  | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET   | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_SET }, ---*/
    /*--- {IFX_GPIO_MODULE_EXIN,  IFX_GPIO_PIN_ID(2, 4),  IFX_GPIO_IOCTL_PIN_CONFIG_DIR_IN  | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET   | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_SET }, ---*/

    /*
     *  External Phy
     */
    // Use interrupt
    {IFX_GPIO_MODULE_EXTPHY_INT, IFX_GPIO_PIN_ID(2, 7), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_IN | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_SET },
    // Use MDIO
    {IFX_GPIO_MODULE_EXTPHY_MDIO, IFX_GPIO_PIN_ID(2, 10), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_IN | IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET },
    {IFX_GPIO_MODULE_EXTPHY_MDIO, IFX_GPIO_PIN_ID(2, 11), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET },
    // Phy Reset
    {IFX_GPIO_MODULE_EXTPHY_RESET, IFX_GPIO_PIN_ID(2, 2), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET },
    {IFX_GPIO_MODULE_EXTPHY_RESET, IFX_GPIO_PIN_ID(2, 4), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET },
    // Use internal 25MHz clock
    /*--- {IFX_GPIO_MODULE_EXTPHY_25MHZ_CLOCK, IFX_GPIO_PIN_ID(0, 3), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET }, ---*/
    // no 25MHz clock output on GPIO3
    {IFX_GPIO_MODULE_EXTPHY_25MHZ_CLOCK, IFX_GPIO_PIN_ID(0, 3), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_IN | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET },

    /*
     *  TAPI - FXO
     */
    //  FXO rstQ
    {IFX_GPIO_MODULE_TAPI_FXO, IFX_GPIO_PIN_ID(0, 12), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET | IFX_GPIO_IOCTL_PIN_CONFIG_PUDEN_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_PUDSEL_SET},
    //  FXO CSQ
    {IFX_GPIO_MODULE_TAPI_FXO, IFX_GPIO_PIN_ID(3, 2), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET | IFX_GPIO_IOCTL_PIN_CONFIG_PUDEN_SET | IFX_GPIO_IOCTL_PIN_CONFIG_PUDSEL_SET | IFX_GPIO_IOCTL_PIN_CONFIG_OUTPUT_SET},

    /*
     *  EXIN5 - reserved by ICU driver when IRQ is requested, it will be reserved by FXO
     */
    //{IFX_GPIO_MODULE_EXIN, IFX_GPIO_PIN_ID(2, 14), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_IN | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_SET | IFX_GPIO_IOCTL_PIN_CONFIG_OD_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_PUDEN_SET | IFX_GPIO_IOCTL_PIN_CONFIG_PUDSEL_SET},

    /*
     *  PAGE BUTTON DRIVER for DECT
     */
    {IFX_GPIO_MODULE_PAGE, IFX_GPIO_PIN_ID(2, 6), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_IN | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR },

    /*
     * AVM DECT RESET  
     */
    {IFX_GPIO_MODULE_PIGLET, IFX_GPIO_PIN_ID(3, 6), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET},
    /*
     * AVM DECT UART  
     */
    {IFX_GPIO_MODULE_PIGLET, IFX_GPIO_PIN_ID(0, 11), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_IN | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR},
    {IFX_GPIO_MODULE_PIGLET, IFX_GPIO_PIN_ID(0, 12), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET},
    /*
     *  AVM PCMBUS
     */
    //  TDM/FSC - used as INPUT by default (FSC Slave)
    {IFX_GPIO_MODULE_PCMLINK, IFX_GPIO_PIN_ID(0, 0), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_IN | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_SET | IFX_GPIO_IOCTL_PIN_CONFIG_PUDSEL_SET | IFX_GPIO_IOCTL_PIN_CONFIG_PUDEN_SET},
    //  TDM/DO
    {IFX_GPIO_MODULE_PCMLINK, IFX_GPIO_PIN_ID(1, 9), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET},
    //  TDM/DI
    {IFX_GPIO_MODULE_PCMLINK, IFX_GPIO_PIN_ID(2, 9), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_IN | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_SET | IFX_GPIO_IOCTL_PIN_CONFIG_PUDSEL_SET | IFX_GPIO_IOCTL_PIN_CONFIG_PUDEN_SET },
    //  TDM/DCL - used as INPUT by default (DCL Slave)
    {IFX_GPIO_MODULE_PCMLINK, IFX_GPIO_PIN_ID(2, 8), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_IN | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_SET | IFX_GPIO_IOCTL_PIN_CONFIG_PUDSEL_SET | IFX_GPIO_IOCTL_PIN_CONFIG_PUDEN_SET },
    // SPI_CS2
    {IFX_GPIO_MODULE_PCMLINK, IFX_GPIO_PIN_ID(1, 6), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_IN | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR },
    // ZERBERUS (EXIIN5)
    {IFX_GPIO_MODULE_PCMLINK, IFX_GPIO_PIN_ID(0, 9), IFX_GPIO_IOCTL_PIN_CONFIG_DIR_IN | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_SET | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_SET },

    /*
     *  USB
     */
#if defined(CONFIG_USB_HOST_IFX) || defined(CONFIG_USB_HOST_IFX_MODULE)
    {IFX_GPIO_MODULE_USB, IFX_GPIO_USB_VBUS1, IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET},
    {IFX_GPIO_MODULE_USB, IFX_GPIO_USB_VBUS2, IFX_GPIO_IOCTL_PIN_CONFIG_DIR_OUT | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL0_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_ALTSEL1_CLEAR | IFX_GPIO_IOCTL_PIN_CONFIG_OD_SET},
#endif

    //  module_id of last item must be IFX_GPIO_PIN_AVAILABLE
    {IFX_GPIO_PIN_AVAILABLE, 0, 0}
};
EXPORT_SYMBOL(g_board_gpio_pin_map);

struct ifx_ledc_config_param g_board_ledc_hw_config = {
    .operation_mask         = IFX_LEDC_CFG_OP_UPDATE_SOURCE | IFX_LEDC_CFG_OP_BLINK | IFX_LEDC_CFG_OP_UPDATE_CLOCK | IFX_LEDC_CFG_OP_STORE_MODE | IFX_LEDC_CFG_OP_SHIFT_CLOCK | IFX_LEDC_CFG_OP_DATA_OFFSET | IFX_LEDC_CFG_OP_NUMBER_OF_LED | IFX_LEDC_CFG_OP_DATA | IFX_LEDC_CFG_OP_MIPS0_ACCESS | IFX_LEDC_CFG_OP_DATA_CLOCK_EDGE,
    .source_mask            = 3,
    .source                 = 0,    //  by default all LEDs controlled by LEDC DATA
    .blink_mask             = (1 << 16) - 1,
    .blink                  = 0,    //  disable blink for all LEDs
    .update_clock           = LED_CON1_UPDATE_SRC_SOFTWARE,
    .fpid                   = 0,
    .store_mode             = 0,    //  single store
    .fpis                   = 0,
    .data_offset            = 0,
    .number_of_enabled_led  = 16,
    .data_mask              = (1 << 16) - 1,
    .data                   = (1 << 0) | (1 << 1) | (1 << 14),  // LED0,1 - 1 is turning off, LED14 - Warning LED turns on by default
    .mips0_access_mask      = (1 << 16) - 1,
    .mips0_access           = (1 << 16) - 1,
    .f_data_clock_on_rising = 0,    //  falling edge
};
EXPORT_SYMBOL(g_board_ledc_hw_config);

struct ifx_led_device g_board_led_hw_config[] = {
    {
        .default_trigger    = NULL,
        .phys_id            = 0,
        .value_on           = 0,
        .value_off          = 1,
        .flags              = IFX_LED_DEVICE_FLAG_PHYS_LEDC,
    },
    {
        .default_trigger    = NULL,
        .phys_id            = 1,
        .value_on           = 0,
        .value_off          = 1,
        .flags              = IFX_LED_DEVICE_FLAG_PHYS_LEDC,
    },
    {
        .default_trigger    = NULL,
        .phys_id            = 2,
        .value_on           = 1,
        .value_off          = 0,
        .flags              = IFX_LED_DEVICE_FLAG_PHYS_LEDC,
    },
    {
        .default_trigger    = NULL,
        .phys_id            = 3,
        .value_on           = 1,
        .value_off          = 0,
        .flags              = IFX_LED_DEVICE_FLAG_PHYS_LEDC,
    },
    {
        .default_trigger    = NULL,
        .phys_id            = 4,
        .value_on           = 1,
        .value_off          = 0,
        .flags              = IFX_LED_DEVICE_FLAG_PHYS_LEDC,
    },
    {
        .default_trigger    = NULL,
        .phys_id            = 5,
        .value_on           = 1,
        .value_off          = 0,
        .flags              = IFX_LED_DEVICE_FLAG_PHYS_LEDC,
    },
    {
        .default_trigger    = NULL,
        .phys_id            = 6,
        .value_on           = 1,
        .value_off          = 0,
        .flags              = IFX_LED_DEVICE_FLAG_PHYS_LEDC,
    },
    {
        .default_trigger    = NULL,
        .phys_id            = 7,
        .value_on           = 1,
        .value_off          = 0,
        .flags              = IFX_LED_DEVICE_FLAG_PHYS_LEDC,
    },
    {
        .default_trigger    = NULL,
        .phys_id            = 8,
        .value_on           = 1,
        .value_off          = 0,
        .flags              = IFX_LED_DEVICE_FLAG_PHYS_LEDC,
    },
    {
        .default_trigger    = NULL,
        .phys_id            = 9,
        .value_on           = 1,
        .value_off          = 0,
        .flags              = IFX_LED_DEVICE_FLAG_PHYS_LEDC,
    },
    {
        .default_trigger    = NULL,
        .phys_id            = 10,
        .value_on           = 1,
        .value_off          = 0,
        .flags              = IFX_LED_DEVICE_FLAG_PHYS_LEDC,
    },
    {
        .default_trigger    = NULL,
        .phys_id            = 11,
        .value_on           = 1,
        .value_off          = 0,
        .flags              = IFX_LED_DEVICE_FLAG_PHYS_LEDC,
    },
    {
        .default_trigger    = NULL,
        .phys_id            = 12,
        .value_on           = 1,
        .value_off          = 0,
        .flags              = IFX_LED_DEVICE_FLAG_PHYS_LEDC,
    },
    {
        .default_trigger    = NULL,
        .phys_id            = 13,
        .value_on           = 1,
        .value_off          = 0,
        .flags              = IFX_LED_DEVICE_FLAG_PHYS_LEDC,
    },
    {
        .default_trigger    = NULL,
        .phys_id            = 14,
        .value_on           = 1,
        .value_off          = 0,
        .flags              = IFX_LED_DEVICE_FLAG_PHYS_LEDC,
    },
    {
        .default_trigger    = NULL,
        .phys_id            = 15,
        .value_on           = 1,
        .value_off          = 0,
        .flags              = IFX_LED_DEVICE_FLAG_PHYS_LEDC,
    },
    {
        .flags              = IFX_LED_DEVICE_FLAG_INVALID,
    }
};
EXPORT_SYMBOL(g_board_led_hw_config);