--- zzzz-none-000/linux-2.6.39.4/scripts/kconfig/Makefile	2011-08-03 19:43:28.000000000 +0000
+++ puma6-atom-6490-729/linux-2.6.39.4/scripts/kconfig/Makefile	2021-11-10 13:38:18.000000000 +0000
@@ -100,11 +100,17 @@
 allnoconfig allyesconfig allmodconfig alldefconfig randconfig: $(obj)/conf
 	$< --$@ $(Kconfig)
 
-PHONY += listnewconfig oldnoconfig savedefconfig defconfig
+PHONY += listnewconfig olddefconfig oldnoconfig savedefconfig defconfig
 
-listnewconfig oldnoconfig: $(obj)/conf
+listnewconfig olddefconfig: $(obj)/conf
 	$< --$@ $(Kconfig)
 
+# oldnoconfig is an alias of olddefconfig, because people already are dependent
+# on its behavior(sets new symbols to their default value but not 'n') with the
+# counter-intuitive name.
+oldnoconfig: $(obj)/conf
+	$< --olddefconfig $(Kconfig)
+
 savedefconfig: $(obj)/conf
 	$< --$@=defconfig $(Kconfig)
 
@@ -138,7 +144,7 @@
 	@echo  '  alldefconfig    - New config with all symbols set to default'
 	@echo  '  randconfig	  - New config with random answer to all options'
 	@echo  '  listnewconfig   - List new options'
-	@echo  '  oldnoconfig     - Same as silentoldconfig but set new symbols to n (unset)'
+	@echo  '  olddefconfig	  - Same as silentoldconfig but sets new symbols to their default value'
 
 # lxdialog stuff
 check-lxdialog  := $(srctree)/$(src)/lxdialog/check-lxdialog.sh
@@ -168,8 +174,11 @@
 mconf-objs     := mconf.o zconf.tab.o $(lxdialog)
 nconf-objs     := nconf.o zconf.tab.o nconf.gui.o
 kxgettext-objs	:= kxgettext.o zconf.tab.o
+qconf-cxxobjs	:= qconf.o
+qconf-objs	:= zconf.tab.o
+gconf-objs	:= gconf.o zconf.tab.o
 
-hostprogs-y := conf qconf gconf kxgettext
+hostprogs-y := conf
 
 ifeq ($(MAKECMDGOALS),nconfig)
 	hostprogs-y += nconf
@@ -179,6 +188,10 @@
 	hostprogs-y += mconf
 endif
 
+ifeq ($(MAKECMDGOALS),update-po-config)
+	hostprogs-y += kxgettext
+endif
+
 ifeq ($(MAKECMDGOALS),xconfig)
 	qconf-target := 1
 endif
@@ -196,8 +209,8 @@
 gconf-objs	:= gconf.o kconfig_load.o zconf.tab.o
 endif
 
-clean-files	:= lkc_defs.h qconf.moc .tmp_qtcheck \
-		   .tmp_gtkcheck zconf.tab.c lex.zconf.c zconf.hash.c gconf.glade.h
+clean-files	:= lkc_defs.h qconf.moc .tmp_qtcheck .tmp_gtkcheck
+clean-files	+= zconf.tab.c zconf.lex.c zconf.hash.c gconf.glade.h
 clean-files     += mconf qconf gconf nconf
 clean-files     += config.pot linux.pot
 
@@ -213,9 +226,12 @@
 HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(srctree)/$(src)/check.sh $(HOSTCC) $(HOSTCFLAGS))
 
 # generated files seem to need this to find local include files
-HOSTCFLAGS_lex.zconf.o	:= -I$(src)
+HOSTCFLAGS_zconf.lex.o	:= -I$(src)
 HOSTCFLAGS_zconf.tab.o	:= -I$(src)
 
+LEX_PREFIX_zconf	:= zconf
+YACC_PREFIX_zconf	:= zconf
+
 HOSTLOADLIBES_qconf	= $(KC_QT_LIBS) -ldl
 HOSTCXXFLAGS_qconf.o	= $(KC_QT_CFLAGS) -D LKC_DIRECT_LINK
 
@@ -249,12 +265,12 @@
 	        if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \
 	      done; \
 	      if [ -z "$$dir" ]; then \
-	        echo "*"; \
-	        echo "* Unable to find any QT installation. Please make sure that"; \
-	        echo "* the QT4 or QT3 development package is correctly installed and"; \
-	        echo "* either qmake can be found or install pkg-config or set"; \
-	        echo "* the QTDIR environment variable to the correct location."; \
-	        echo "*"; \
+	        echo >&2 "*"; \
+	        echo >&2 "* Unable to find any QT installation. Please make sure that"; \
+	        echo >&2 "* the QT4 or QT3 development package is correctly installed and"; \
+	        echo >&2 "* either qmake can be found or install pkg-config or set"; \
+	        echo >&2 "* the QTDIR environment variable to the correct location."; \
+	        echo >&2 "*"; \
 	        false; \
 	      fi; \
 	      libpath=$$dir/lib; lib=qt; osdir=""; \
@@ -294,61 +310,29 @@
 		if `pkg-config --atleast-version=2.0.0 gtk+-2.0`; then			\
 			touch $@;								\
 		else									\
-			echo "*"; 							\
-			echo "* GTK+ is present but version >= 2.0.0 is required.";	\
-			echo "*";							\
+			echo >&2 "*"; 							\
+			echo >&2 "* GTK+ is present but version >= 2.0.0 is required.";	\
+			echo >&2 "*";							\
 			false;								\
 		fi									\
 	else										\
-		echo "*"; 								\
-		echo "* Unable to find the GTK+ installation. Please make sure that"; 	\
-		echo "* the GTK+ 2.0 development package is correctly installed..."; 	\
-		echo "* You need gtk+-2.0, glib-2.0 and libglade-2.0."; 		\
-		echo "*"; 								\
+		echo >&2 "*"; 								\
+		echo >&2 "* Unable to find the GTK+ installation. Please make sure that"; 	\
+		echo >&2 "* the GTK+ 2.0 development package is correctly installed..."; 	\
+		echo >&2 "* You need gtk+-2.0, glib-2.0 and libglade-2.0."; 		\
+		echo >&2 "*"; 								\
 		false;									\
 	fi
 endif
 
-$(obj)/zconf.tab.o: $(obj)/lex.zconf.c $(obj)/zconf.hash.c
+$(obj)/zconf.tab.o: $(obj)/zconf.lex.c $(obj)/zconf.hash.c
 
-$(obj)/kconfig_load.o: $(obj)/lkc_defs.h
-
-$(obj)/qconf.o: $(obj)/qconf.moc $(obj)/lkc_defs.h
-
-$(obj)/gconf.o: $(obj)/lkc_defs.h
+$(obj)/qconf.o: $(obj)/qconf.moc
 
 $(obj)/%.moc: $(src)/%.h
 	$(KC_QT_MOC) -i $< -o $@
 
-$(obj)/lkc_defs.h: $(src)/lkc_proto.h
-	sed < $< > $@ 's/P(\([^,]*\),.*/#define \1 (\*\1_p)/'
-
 # Extract gconf menu items for I18N support
 $(obj)/gconf.glade.h: $(obj)/gconf.glade
 	intltool-extract --type=gettext/glade $(obj)/gconf.glade
 
-###
-# The following requires flex/bison/gperf
-# By default we use the _shipped versions, uncomment the following line if
-# you are modifying the flex/bison src.
-# LKC_GENPARSER := 1
-
-ifdef LKC_GENPARSER
-
-$(obj)/zconf.tab.c: $(src)/zconf.y
-$(obj)/lex.zconf.c: $(src)/zconf.l
-$(obj)/zconf.hash.c: $(src)/zconf.gperf
-
-%.tab.c: %.y
-	bison -l -b $* -p $(notdir $*) $<
-	cp $@ $@_shipped
-
-lex.%.c: %.l
-	flex -L -P$(notdir $*) -o$@ $<
-	cp $@ $@_shipped
-
-%.hash.c: %.gperf
-	gperf < $< > $@
-	cp $@ $@_shipped
-
-endif