/* * * puma7_board_setup.c * Description: * puma7 board/soc initialization * * GPL LICENSE SUMMARY * * Copyright(c) 2014-2019 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. * The full GNU General Public License is included in this distribution * in the file called LICENSE.GPL. * * Contact Information: * Intel Corporation * 2200 Mission College Blvd. * Santa Clara, CA 97052 * */ #include #include #ifdef CONFIG_CACHE_L2X0 #include #endif #include #include #include #include #include #include #include <../puma7/puma7_cru_ctrl.h> #include <../puma7/puma7_pmu.h> #include #include #include unsigned int cpu_freq = AVALANCHE_ARM_FREQ_DEFAULT; unsigned long puma7_boardtype_id = 0; /* 0 - unknown boardtype */ #if 0 static int arm_pwr_state = 0; static struct proc_dir_entry *gp_arm_pwr_state_file; static struct proc_dir_entry *gp_ddr_pwr_state_file; static struct proc_dir_entry *gp_ddr_sync_state_file; static struct proc_dir_entry *gp_ddr_pwr_state_verbose_file; #endif extern unsigned int system_rev; extern void (*pm_power_off)(void); /* reboot hook: */ extern int reboot_hook_proc_init(void); extern int reboot_hook_is_set(void); extern int reboot_hook_run(void); /** \enum AVL_NS_REMAP_SIZE_T \brief Port remap window size */ typedef enum AVL_NS_REMAP_SIZE_tag { AVL_NS_REMAP_SIZE_0K = 0, AVL_NS_REMAP_SIZE_INV1, /* this is not supported by arm */ AVL_NS_REMAP_SIZE_INV2, /* this is not supported by arm */ AVL_NS_REMAP_SIZE_4K, AVL_NS_REMAP_SIZE_8K, /* like this it can go upto 2GB, but let us keep 8k as max*/ AVL_NS_REMAP_SIZE_MAX }AVL_NS_REMAP_SIZE_T; #define AVL_NS_REMAP_BASE_MASK 0xFFFFF000 /* TBD - what should be the value?*/ void puma_restart(enum reboot_mode reboot_mode, const char *cmd); /* void puma_power_off(void); */ /* This routine remaps the peripheral port remap register to the specified physical address*/ /* argument base should be aligned to the size of remapped region */ int avalanche_remap_non_shared(unsigned int phy_base, AVL_NS_REMAP_SIZE_T size) { unsigned int region_size = 0; if((size >= AVL_NS_REMAP_SIZE_MAX) || (size == AVL_NS_REMAP_SIZE_INV1) || (size == AVL_NS_REMAP_SIZE_INV2)) return (-1); /* calculate region_size from enum (second param) */ region_size = ((1 << (size-1)) * (1024)); /* align base address to the specified size */ phy_base &= (~(region_size-1)); /* mask out unwanted bits */ phy_base &= AVL_NS_REMAP_BASE_MASK; /* set the size bit */ phy_base |= size; /* update port remap h/w register */ __asm__ ("mcr p15, 0, %0, c15, c2, 4" : : "r" (phy_base): "cc"); return (0); } static int __init set_boardtype_str (char *str) { puma7_boardtype_id = simple_strtoul(str, NULL, 16); if (puma7_boardtype_id == PUMA7_UNKNOWN_BOARD_ID) { printk(KERN_ERR "Puma7 boardtype parsing failed - boardtype must be hex digit [%s].\n", str); } else { printk(KERN_INFO "Puma7 boardtype Id %lu \n",puma7_boardtype_id); } return 1; } __setup("boardtype=", set_boardtype_str); #if 0 static int arm_proc_read_state (struct seq_file *m, void *v) { seq_printf (m, "%d\n", arm_pwr_state); return 0; } static int arm_proc_write_state (struct file *fp, const char __user *buf, size_t count, loff_t *f_pos) { /* In Puma-7 we cant change the ARM clock rate. */ return -EPERM; /* Operation not permitted */ } DECLARE_PROCFS_ENTRY(arm_state, arm_proc_read_state, arm_proc_write_state) int arm_create_pwr_state_proc (void) { gp_arm_pwr_state_file = proc_create("avalanche/arm_state", 0644, NULL, &arm_state_proc_fops); return 0; } static int ddr_proc_read_state_verbose (struct seq_file *m, void *v) { return -EPERM; } static int ddr_proc_read_sync_state (struct seq_file *m, void *v) { return -EPERM; } static int ddr_proc_read_state (struct seq_file *m, void *v) { return -EPERM; } static int ddr_proc_write_state (struct file *fp, const char __user *buf, size_t count, loff_t *f_pos) { /* In Puma-7 we cant change the DDR regs. */ return -EPERM; /* Operation not permitted */ } DECLARE_PROCFS_ENTRY(ddr_state, ddr_proc_read_state, ddr_proc_write_state) DECLARE_PROCFS_ENTRY(ddr_state_verbose, ddr_proc_read_state_verbose, NULL) DECLARE_PROCFS_ENTRY(ddr_sync_state, ddr_proc_read_sync_state, NULL) int ddr_create_pwr_state_proc (void) { gp_ddr_pwr_state_file = proc_create("avalanche/ddr_state", 0644, NULL, &ddr_state_proc_fops); gp_ddr_pwr_state_verbose_file = proc_create("avalanche/ddr_state_verbose", 0444, NULL, &ddr_state_verbose_proc_fops); gp_ddr_sync_state_file = proc_create("avalanche/ddr_sync_state", 0444, NULL, &ddr_sync_state_proc_fops); return 0; } late_initcall(ddr_create_pwr_state_proc); late_initcall(arm_create_pwr_state_proc); #endif int puma7_proc_init (void) { reboot_hook_proc_init(); return 0; } fs_initcall(puma7_proc_init); /* Boot sequance: 1. start_kernel()@/src/init/main.c calling to -> 2. setup_arch()@/src/arch/arm/kernel/setup.c calling to -> 3. init_early (a callback, which is initialize to puma_avalanche_setup, by MACHINE_START macro at src\arch\arm\mach-avalanche\puma7\puma7_core.c or puma6/puma5) 4. puma_avalanche_setup, then calling to this function (avalanche_soc_platform_init) */ void avalanche_soc_platform_init(void) { /* unsigned int paramVal_silicon; */ /* unsigned int paramVal_boardType; */ /*************************************************************** * Boot config initialization - NOTE *** MUST BE DONE FIRST **************************************************************/ PAL_sysBootCfgCtrl_init(); PAL_sysBootCfgCtrl_Endianess(); /* Select SAI for RCE tarnsaction to PMC over IOSF-SB (Direct) */ /* For B0 stepping - may be removed */ PAL_sysBootCfgCtrl_SetRCE_SAI(); /*************************************************************** * Get entities on the board out of reset **************************************************************/ PAL_sysResetCtrl(AVALANCHE_UART0_RESET, OUT_OF_RESET); PAL_sysResetCtrl(AVALANCHE_UART1_RESET, OUT_OF_RESET); PAL_sysResetCtrl(AVALANCHE_I2C_RESET, OUT_OF_RESET); PAL_sysResetCtrl(AVALANCHE_TIMER1_RESET, OUT_OF_RESET); PAL_sysResetCtrl(AVALANCHE_TIMER2_RESET, OUT_OF_RESET); PAL_sysResetCtrl(AVALANCHE_GPIO_RESET_BIT, OUT_OF_RESET); PAL_sysResetCtrl(AVALANCHE_PP_RESET, OUT_OF_RESET); /*puma7 TDM out of reset*/ PAL_sysResetCtrl(CRU_NUM_TDM00, OUT_OF_RESET); PAL_sysResetCtrl(CRU_NUM_TDM01, OUT_OF_RESET); PAL_sysResetCtrl(CRU_NUM_TDM10, OUT_OF_RESET); PAL_sysResetCtrl(CRU_NUM_TDM11, OUT_OF_RESET); PAL_sysResetCtrl(CRU_NUM_TDM20, OUT_OF_RESET); PAL_sysResetCtrl(CRU_NUM_TDM21, OUT_OF_RESET); // TBD - add /* Check silicon stepping */ /*************************************************************** * Initialize clock controller **************************************************************/ /* Initialize clock controller */ PAL_sysClkcInit(NULL); cpu_freq = PAL_sysClkcGetFreq(PAL_SYS_CLKC_ARM); /*************************************************************** * Programming ARM Peripheral Port remap register to map Interrupt controller * Userspace mmap on non-shared region will not work if this is not done ***************************************************************/ if(avalanche_remap_non_shared(INTC_PHY, AVL_NS_REMAP_SIZE_4K) == 0) printk("Initialized Peripheral Port Remap Register to base : 0x%08x\n", INTC_PHY); else printk("Peripheral Port Remap Register Initialization Failed at base : 0x%08x\n", INTC_PHY); printk("Puma-7 system_rev = %d -- docsis ip rev = %d\n", system_rev, avalanche_get_chip_version_info()); /* Callback definition for the last function to be called during system restart process */ arm_pm_restart = puma_restart; /* Callback definition for the last function to be called during system shutdown process */ /* pm_power_off = puma_power_off; */ /* Enabling clocks for MoCA */ PAL_sysBootCfgCtrl_MoCAConfigClkMux(BOOTCFG_IO_ENABLE); } void l2x0_shutdown(void) { unsigned long flags; printk(KERN_EMERG "Shutting down L2cache\n"); /* disable interrupts */ local_irq_save(flags); outer_disable(); /* enable interrupts */ local_irq_restore(flags); } #ifdef CONFIG_CACHE_L2X0 static struct syscore_ops l2x0_syscore_ops = { .shutdown = l2x0_shutdown, }; #endif static int __init avalanche_soc_platform_init_late(void) { /*************************************************************** * Initialize l2cache controller **************************************************************/ #ifdef CONFIG_CACHE_L2X0 { bool l2cache_enabled; PAL_SYS_RESET_CTRL_T l2cache_reset; unsigned int aux_mask, aux_val; /* The following two settings must be enabled by UEFI for L2$ to work */ l2cache_enabled = PAL_sysBootCfgCtrl_IsCpuL2CacheEnabled(); l2cache_reset = PAL_sysGetResetStatus(CRU_NUM_ARM11_L2); if(l2cache_enabled == false) { printk("Puma7 L2C: Not enabled in boot config!\n"); /* Powering down ARM11 L2 Cache SRAM (which is enabled by default...) */ if (PUMA7_SRAM_Ctrl(PMU_ARM11_SRAM_ID, PMU_SRAM_POWER_DOWN) != 0) { /* Failed to power down L2 Cache SRAM */ printk(KERN_ERR "Failed to power down L2 Cache SRAM\n"); return 0; } } else if(l2cache_reset != OUT_OF_RESET) { printk("Puma7 L2C: CRU is not taken out of reset!, l2cache_reset state=%d\n", l2cache_reset); } else { /* Powering up ARM11 L2 Cache SRAM */ if (PUMA7_SRAM_Ctrl(PMU_ARM11_SRAM_ID, PMU_SRAM_POWER_UP) != 0) { /* Failed to power up L2 Cache SRAM */ printk(KERN_ERR "Failed to power up L2 Cache SRAM\n"); return 0; } /* L2cache Configuration --------------------- [30] ; Early BRESP enable [27] ; NS Interrupt access control [26] ; NS Lockdown enable [25] ; Random replacement [23] ; [24:23] Write allocate override (ex: 2 = force write allocate) [22] ; Shared override enable [21] ; Parity enable [20] ; Event bus enable [19:17] ; Way size - 001 for 16KB [16] ; Associativity - 1 for 16 ways [12] ; Exclusive cache enable [11] ; Store buffer device limitation enable [10] ; SO and DEV read priority enable [0 ] ; Full line of zero enable */ aux_val = (L310_AUX_CTRL_ASSOCIATIVITY_16 | L2C_AUX_CTRL_WAY_SIZE(1)); aux_mask = ~(L310_AUX_CTRL_FULL_LINE_ZERO | L310_AUX_CTRL_ASSOCIATIVITY_16 | L2C_AUX_CTRL_WAY_SIZE_MASK | L310_AUX_CTRL_CACHE_REPLACE_RR | L310_AUX_CTRL_EARLY_BRESP); l2x0_init((void*)AVALANCHE_L2CACHE_BASE, aux_val, aux_mask); register_syscore_ops(&l2x0_syscore_ops); printk("Puma7 L2C: L2cache init DONE\n"); } } #else /* Powering down ARM11 L2 Cache SRAM (which is enabled by default...) */ if (PUMA7_SRAM_Ctrl(PMU_ARM11_SRAM_ID, PMU_SRAM_POWER_DOWN) != 0) { /* Failed to power down L2 Cache SRAM */ printk(KERN_ERR "Failed to power down L2 Cache SRAM\n"); } #endif /* CONFIG_CACHE_L2X0 */ return 0; } core_initcall(avalanche_soc_platform_init_late); #ifdef CONFIG_AVALANCHE_INTC_PACING unsigned int avalanche_get_intc_input_freq(void) { return PAL_sysClkcGetFreq(PAL_SYS_CLKC_INTC); } #endif void avalanche_processor_idle(void) { cpu_do_idle(); return ; } #if 0 /* * Puma7 OS power off flow ends here - on shutdown send * MBOX message to PMC and write to RCE shut down register. */ void puma_power_off( void ) { printk(KERN_EMERG "Power Off: Send message and write to RCE register\n"); /* MBOX Send delayed message */ /* Write to RCE Register */ } #endif /* * Puma7 OS fatal error reset flow ends here - on shutdown * Set watchdog timer for immediate reset. */ void avalanche_system_reset(void) { #if 0 /* AVM: Atom side may do undesired things, let us clean up and tear down the system as per the watchdog. */ if (reboot_hook_is_set() == 1) { /* Reboot Hook - In case of graceful reboot, the userspace application sets a reboot hook before calling to reboot() (before killing the init process). To set a reboot hook the user needs to write to /proc/avalanche/reboot_hook. More information in "puma7_reboot_hook.c". */ reboot_hook_run(); #if defined(CONFIG_ARM_AVALANCHE_WDTIMER) /* disable watchdog timer */ printk("Reboot: Disable WDT.\n"); PAL_sysWdtimerCtrl(AVALANCHE_WDT_DISABLE_VALUE); #endif printk("Reboot: system reset.\n"); while (1); } #endif /* If reboot hook is not set then initiate a WatchDog Reset */ console_verbose(); printk("Reboot: system reset.\n"); printk_avm_console_bend(0); /* Flush console */ console_lock(); console_unlock(); local_irq_disable(); #if !defined(CONFIG_ARM_AVALANCHE_WDTIMER) /* get the Watchdog timer module out of reset */ PAL_sysResetCtrl(AVALANCHE_WDT_RESET, OUT_OF_RESET); /* Initialize watchdog timer */ PAL_sysWdtimerInit(AVALANCHE_WATCHDOG_TIMER_BASE, PAL_sysClkcGetFreq(PAL_SYS_CLKC_WDT)); #endif /* disable watchdog timer */ if(PAL_sysWdtimerCtrl(AVALANCHE_WDT_DISABLE_VALUE)) return; /* set timer (in msecs) */ if(PAL_sysWdtimerSetPeriod(AVALANCHE_WDT_RESET_MARGIN)) return; /* enable watchdog timer */ if(PAL_sysWdtimerCtrl(AVALANCHE_WDT_ENABLE_VALUE)) return; /* kick is required to reload the new timeout margin */ PAL_sysWdtimerKick(); while (1); } void puma_restart(enum reboot_mode reboot_mode, const char *cmd) { avalanche_system_reset(); }