// SPDX-License-Identifier: GPL-2.0-only /* * linux/kernel/printk.c * * Copyright (C) 1991, 1992 Linus Torvalds * * Modified to make sys_syslog() more flexible: added commands to * return the last 4k of kernel messages, regardless of whether * they've been read or not. Added option to suppress kernel printk's * to the console. Added hook for sending the console messages * elsewhere, in preparation for a serial line console (someday). * Ted Ts'o, 2/11/93. * Modified for sysctl support, 1/8/97, Chris Horn. * Fixed SMP synchronization, 08/08/99, Manfred Spraul * manfred@colorfullife.com * Rewrote bits to get rid of console_lock * 01Mar01 Andrew Morton */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define CREATE_TRACE_POINTS #include #include "printk_ringbuffer.h" #include "console_cmdline.h" #include "braille.h" #include "internal.h" int console_printk[4] = { CONSOLE_LOGLEVEL_DEFAULT, /* console_loglevel */ MESSAGE_LOGLEVEL_DEFAULT, /* default_message_loglevel */ CONSOLE_LOGLEVEL_MIN, /* minimum_console_loglevel */ CONSOLE_LOGLEVEL_DEFAULT, /* default_console_loglevel */ }; EXPORT_SYMBOL_GPL(console_printk); atomic_t ignore_console_lock_warning __read_mostly = ATOMIC_INIT(0); EXPORT_SYMBOL(ignore_console_lock_warning); /* * Low level drivers may need that to know if they can schedule in * their unblank() callback or not. So let's export it. */ int oops_in_progress; EXPORT_SYMBOL(oops_in_progress); /* * console_sem protects the console_drivers list, and also * provides serialisation for access to the entire console * driver system. */ static DEFINE_SEMAPHORE(console_sem); struct console *console_drivers; EXPORT_SYMBOL_GPL(console_drivers); /* * System may need to suppress printk message under certain * circumstances, like after kernel panic happens. */ int __read_mostly suppress_printk; #ifdef CONFIG_LOCKDEP static struct lockdep_map console_lock_dep_map = { .name = "console_lock" }; #endif enum devkmsg_log_bits { __DEVKMSG_LOG_BIT_ON = 0, __DEVKMSG_LOG_BIT_OFF, __DEVKMSG_LOG_BIT_LOCK, }; enum devkmsg_log_masks { DEVKMSG_LOG_MASK_ON = BIT(__DEVKMSG_LOG_BIT_ON), DEVKMSG_LOG_MASK_OFF = BIT(__DEVKMSG_LOG_BIT_OFF), DEVKMSG_LOG_MASK_LOCK = BIT(__DEVKMSG_LOG_BIT_LOCK), }; /* Keep both the 'on' and 'off' bits clear, i.e. ratelimit by default: */ #define DEVKMSG_LOG_MASK_DEFAULT 0 static unsigned int __read_mostly devkmsg_log = DEVKMSG_LOG_MASK_DEFAULT; static int __control_devkmsg(char *str) { size_t len; if (!str) return -EINVAL; len = str_has_prefix(str, "on"); if (len) { devkmsg_log = DEVKMSG_LOG_MASK_ON; return len; } len = str_has_prefix(str, "off"); if (len) { devkmsg_log = DEVKMSG_LOG_MASK_OFF; return len; } len = str_has_prefix(str, "ratelimit"); if (len) { devkmsg_log = DEVKMSG_LOG_MASK_DEFAULT; return len; } return -EINVAL; } static int __init control_devkmsg(char *str) { if (__control_devkmsg(str) < 0) { pr_warn("printk.devkmsg: bad option string '%s'\n", str); return 1; } /* * Set sysctl string accordingly: */ if (devkmsg_log == DEVKMSG_LOG_MASK_ON) strcpy(devkmsg_log_str, "on"); else if (devkmsg_log == DEVKMSG_LOG_MASK_OFF) strcpy(devkmsg_log_str, "off"); /* else "ratelimit" which is set by default. */ /* * Sysctl cannot change it anymore. The kernel command line setting of * this parameter is to force the setting to be permanent throughout the * runtime of the system. This is a precation measure against userspace * trying to be a smarta** and attempting to change it up on us. */ devkmsg_log |= DEVKMSG_LOG_MASK_LOCK; return 1; } __setup("printk.devkmsg=", control_devkmsg); char devkmsg_log_str[DEVKMSG_STR_MAX_SIZE] = "ratelimit"; int devkmsg_sysctl_set_loglvl(struct ctl_table *table, int write, void *buffer, size_t *lenp, loff_t *ppos) { char old_str[DEVKMSG_STR_MAX_SIZE]; unsigned int old; int err; if (write) { if (devkmsg_log & DEVKMSG_LOG_MASK_LOCK) return -EINVAL; old = devkmsg_log; strncpy(old_str, devkmsg_log_str, DEVKMSG_STR_MAX_SIZE); } err = proc_dostring(table, write, buffer, lenp, ppos); if (err) return err; if (write) { err = __control_devkmsg(devkmsg_log_str); /* * Do not accept an unknown string OR a known string with * trailing crap... */ if (err < 0 || (err + 1 != *lenp)) { /* ... and restore old setting. */ devkmsg_log = old; strncpy(devkmsg_log_str, old_str, DEVKMSG_STR_MAX_SIZE); return -EINVAL; } } return 0; } /* Number of registered extended console drivers. */ static int nr_ext_console_drivers; /* * Helper macros to handle lockdep when locking/unlocking console_sem. We use * macros instead of functions so that _RET_IP_ contains useful information. */ #define down_console_sem() do { \ down(&console_sem);\ mutex_acquire(&console_lock_dep_map, 0, 0, _RET_IP_);\ } while (0) static int __down_trylock_console_sem(unsigned long ip) { int lock_failed; unsigned long flags; /* * Here and in __up_console_sem() we need to be in safe mode, * because spindump/WARN/etc from under console ->lock will * deadlock in printk()->down_trylock_console_sem() otherwise. */ printk_safe_enter_irqsave(flags); lock_failed = down_trylock(&console_sem); printk_safe_exit_irqrestore(flags); if (lock_failed) return 1; mutex_acquire(&console_lock_dep_map, 0, 1, ip); return 0; } #define down_trylock_console_sem() __down_trylock_console_sem(_RET_IP_) static void __up_console_sem(unsigned long ip) { unsigned long flags; mutex_release(&console_lock_dep_map, ip); printk_safe_enter_irqsave(flags); up(&console_sem); printk_safe_exit_irqrestore(flags); } #define up_console_sem() __up_console_sem(_RET_IP_) /* * This is used for debugging the mess that is the VT code by * keeping track if we have the console semaphore held. It's * definitely not the perfect debug tool (we don't know if _WE_ * hold it and are racing, but it helps tracking those weird code * paths in the console code where we end up in places I want * locked without the console semaphore held). */ static int console_locked, console_suspended; /* * If exclusive_console is non-NULL then only this console is to be printed to. */ static struct console *exclusive_console; /* * Array of consoles built from command line options (console=) */ #define MAX_CMDLINECONSOLES 8 static struct console_cmdline console_cmdline[MAX_CMDLINECONSOLES]; static int preferred_console = -1; static bool has_preferred_console; int console_set_on_cmdline; EXPORT_SYMBOL(console_set_on_cmdline); /* Flag: console code may call schedule() */ static int console_may_schedule; enum con_msg_format_flags { MSG_FORMAT_DEFAULT = 0, MSG_FORMAT_SYSLOG = (1 << 0), }; static int console_msg_format = MSG_FORMAT_DEFAULT; /* * The printk log buffer consists of a sequenced collection of records, each * containing variable length message text. Every record also contains its * own meta-data (@info). * * Every record meta-data carries the timestamp in microseconds, as well as * the standard userspace syslog level and syslog facility. The usual kernel * messages use LOG_KERN; userspace-injected messages always carry a matching * syslog facility, by default LOG_USER. The origin of every message can be * reliably determined that way. * * The human readable log message of a record is available in @text, the * length of the message text in @text_len. The stored message is not * terminated. * * Optionally, a record can carry a dictionary of properties (key/value * pairs), to provide userspace with a machine-readable message context. * * Examples for well-defined, commonly used property names are: * DEVICE=b12:8 device identifier * b12:8 block dev_t * c127:3 char dev_t * n8 netdev ifindex * +sound:card0 subsystem:devname * SUBSYSTEM=pci driver-core subsystem name * * Valid characters in property names are [a-zA-Z0-9.-_]. Property names * and values are terminated by a '\0' character. * * Example of record values: * record.text_buf = "it's a line" (unterminated) * record.info.seq = 56 * record.info.ts_nsec = 36863 * record.info.text_len = 11 * record.info.facility = 0 (LOG_KERN) * record.info.flags = 0 * record.info.level = 3 (LOG_ERR) * record.info.caller_id = 299 (task 299) * record.info.dev_info.subsystem = "pci" (terminated) * record.info.dev_info.device = "+pci:0000:00:01.0" (terminated) * * The 'struct printk_info' buffer must never be directly exported to * userspace, it is a kernel-private implementation detail that might * need to be changed in the future, when the requirements change. * * /dev/kmsg exports the structured data in the following line format: * ",,,[,additional_values, ... ];\n" * * Users of the export format should ignore possible additional values * separated by ',', and find the message after the ';' character. * * The optional key/value pairs are attached as continuation lines starting * with a space character and terminated by a newline. All possible * non-prinatable characters are escaped in the "\xff" notation. */ /* syslog_lock protects syslog_* variables and write access to clear_seq. */ static DEFINE_MUTEX(syslog_lock); #ifdef CONFIG_PRINTK DECLARE_WAIT_QUEUE_HEAD(log_wait); /* All 3 protected by @syslog_lock. */ /* the next printk record to read by syslog(READ) or /proc/kmsg */ static u64 syslog_seq; static size_t syslog_partial; static bool syslog_time; /* All 3 protected by @console_sem. */ /* the next printk record to write to the console */ static u64 console_seq; static u64 exclusive_console_stop_seq; static unsigned long console_dropped; struct latched_seq { seqcount_latch_t latch; u64 val[2]; }; /* * The next printk record to read after the last 'clear' command. There are * two copies (updated with seqcount_latch) so that reads can locklessly * access a valid value. Writers are synchronized by @syslog_lock. */ static struct latched_seq clear_seq = { .latch = SEQCNT_LATCH_ZERO(clear_seq.latch), .val[0] = 0, .val[1] = 0, }; #ifdef CONFIG_PRINTK_CALLER #define PREFIX_MAX 48 #else #define PREFIX_MAX 32 #endif /* the maximum size of a formatted record (i.e. with prefix added per line) */ #define CONSOLE_LOG_MAX 1024 /* the maximum size allowed to be reserved for a record */ #define LOG_LINE_MAX (CONSOLE_LOG_MAX - PREFIX_MAX) #define LOG_LEVEL(v) ((v) & 0x07) #define LOG_FACILITY(v) ((v) >> 3 & 0xff) /* record buffer */ #define LOG_ALIGN __alignof__(unsigned long) #define __LOG_BUF_LEN (1 << CONFIG_LOG_BUF_SHIFT) #define LOG_BUF_LEN_MAX (u32)(1 << 31) static char __log_buf[__LOG_BUF_LEN] __aligned(LOG_ALIGN); static char *log_buf = __log_buf; static u32 log_buf_len = __LOG_BUF_LEN; /* * Define the average message size. This only affects the number of * descriptors that will be available. Underestimating is better than * overestimating (too many available descriptors is better than not enough). */ #define PRB_AVGBITS 5 /* 32 character average length */ #if CONFIG_LOG_BUF_SHIFT <= PRB_AVGBITS #error CONFIG_LOG_BUF_SHIFT value too small. #endif _DEFINE_PRINTKRB(printk_rb_static, CONFIG_LOG_BUF_SHIFT - PRB_AVGBITS, PRB_AVGBITS, &__log_buf[0]); static struct printk_ringbuffer printk_rb_dynamic; static struct printk_ringbuffer *prb = &printk_rb_static; /* * We cannot access per-CPU data (e.g. per-CPU flush irq_work) before * per_cpu_areas are initialised. This variable is set to true when * it's safe to access per-CPU data. */ static bool __printk_percpu_data_ready __read_mostly; bool printk_percpu_data_ready(void) { return __printk_percpu_data_ready; } /* Must be called under syslog_lock. */ static void latched_seq_write(struct latched_seq *ls, u64 val) { raw_write_seqcount_latch(&ls->latch); ls->val[0] = val; raw_write_seqcount_latch(&ls->latch); ls->val[1] = val; } /* Can be called from any context. */ static u64 latched_seq_read_nolock(struct latched_seq *ls) { unsigned int seq; unsigned int idx; u64 val; do { seq = raw_read_seqcount_latch(&ls->latch); idx = seq & 0x1; val = ls->val[idx]; } while (read_seqcount_latch_retry(&ls->latch, seq)); return val; } /* Return log buffer address */ char *log_buf_addr_get(void) { return log_buf; } /* Return log buffer size */ u32 log_buf_len_get(void) { return log_buf_len; } /* * Define how much of the log buffer we could take at maximum. The value * must be greater than two. Note that only half of the buffer is available * when the index points to the middle. */ #define MAX_LOG_TAKE_PART 4 static const char trunc_msg[] = ""; static void truncate_msg(u16 *text_len, u16 *trunc_msg_len) { /* * The message should not take the whole buffer. Otherwise, it might * get removed too soon. */ u32 max_text_len = log_buf_len / MAX_LOG_TAKE_PART; if (*text_len > max_text_len) *text_len = max_text_len; /* enable the warning message (if there is room) */ *trunc_msg_len = strlen(trunc_msg); if (*text_len >= *trunc_msg_len) *text_len -= *trunc_msg_len; else *trunc_msg_len = 0; } int dmesg_restrict = IS_ENABLED(CONFIG_SECURITY_DMESG_RESTRICT); static int syslog_action_restricted(int type) { if (dmesg_restrict) return 1; /* * Unless restricted, we allow "read all" and "get buffer size" * for everybody. */ return type != SYSLOG_ACTION_READ_ALL && type != SYSLOG_ACTION_SIZE_BUFFER; } static int check_syslog_permissions(int type, int source) { /* * If this is from /proc/kmsg and we've already opened it, then we've * already done the capabilities checks at open time. */ if (source == SYSLOG_FROM_PROC && type != SYSLOG_ACTION_OPEN) goto ok; if (syslog_action_restricted(type)) { if (capable(CAP_SYSLOG)) goto ok; /* * For historical reasons, accept CAP_SYS_ADMIN too, with * a warning. */ if (capable(CAP_SYS_ADMIN)) { pr_warn_once("%s (%d): Attempt to access syslog with " "CAP_SYS_ADMIN but no CAP_SYSLOG " "(deprecated).\n", current->comm, task_pid_nr(current)); goto ok; } return -EPERM; } ok: return security_syslog(type); } static void append_char(char **pp, char *e, char c) { if (*pp < e) *(*pp)++ = c; } static ssize_t info_print_ext_header(char *buf, size_t size, struct printk_info *info) { u64 ts_usec = info->ts_nsec; char caller[20]; #ifdef CONFIG_PRINTK_CALLER u32 id = info->caller_id; snprintf(caller, sizeof(caller), ",caller=%c%u", id & 0x80000000 ? 'C' : 'T', id & ~0x80000000); #else caller[0] = '\0'; #endif do_div(ts_usec, 1000); return scnprintf(buf, size, "%u,%llu,%llu,%c%s;", (info->facility << 3) | info->level, info->seq, ts_usec, info->flags & LOG_CONT ? 'c' : '-', caller); } static ssize_t msg_add_ext_text(char *buf, size_t size, const char *text, size_t text_len, unsigned char endc) { char *p = buf, *e = buf + size; size_t i; /* escape non-printable characters */ for (i = 0; i < text_len; i++) { unsigned char c = text[i]; if (c < ' ' || c >= 127 || c == '\\') p += scnprintf(p, e - p, "\\x%02x", c); else append_char(&p, e, c); } append_char(&p, e, endc); return p - buf; } static ssize_t msg_add_dict_text(char *buf, size_t size, const char *key, const char *val) { size_t val_len = strlen(val); ssize_t len; if (!val_len) return 0; len = msg_add_ext_text(buf, size, "", 0, ' '); /* dict prefix */ len += msg_add_ext_text(buf + len, size - len, key, strlen(key), '='); len += msg_add_ext_text(buf + len, size - len, val, val_len, '\n'); return len; } static ssize_t msg_print_ext_body(char *buf, size_t size, char *text, size_t text_len, struct dev_printk_info *dev_info) { ssize_t len; len = msg_add_ext_text(buf, size, text, text_len, '\n'); if (!dev_info) goto out; len += msg_add_dict_text(buf + len, size - len, "SUBSYSTEM", dev_info->subsystem); len += msg_add_dict_text(buf + len, size - len, "DEVICE", dev_info->device); out: return len; } /* /dev/kmsg - userspace message inject/listen interface */ struct devkmsg_user { atomic64_t seq; struct ratelimit_state rs; struct mutex lock; char buf[CONSOLE_EXT_LOG_MAX]; struct printk_info info; char text_buf[CONSOLE_EXT_LOG_MAX]; struct printk_record record; }; static __printf(3, 4) __cold int devkmsg_emit(int facility, int level, const char *fmt, ...) { va_list args; int r; va_start(args, fmt); r = vprintk_emit(facility, level, NULL, fmt, args); va_end(args); return r; } static ssize_t devkmsg_write(struct kiocb *iocb, struct iov_iter *from) { char *buf, *line; int level = default_message_loglevel; int facility = 1; /* LOG_USER */ struct file *file = iocb->ki_filp; struct devkmsg_user *user = file->private_data; size_t len = iov_iter_count(from); ssize_t ret = len; if (!user || len > LOG_LINE_MAX) return -EINVAL; /* Ignore when user logging is disabled. */ if (devkmsg_log & DEVKMSG_LOG_MASK_OFF) return len; /* Ratelimit when not explicitly enabled. */ if (!(devkmsg_log & DEVKMSG_LOG_MASK_ON)) { if (!___ratelimit(&user->rs, current->comm)) return ret; } buf = kmalloc(len+1, GFP_KERNEL); if (buf == NULL) return -ENOMEM; buf[len] = '\0'; if (!copy_from_iter_full(buf, len, from)) { kfree(buf); return -EFAULT; } /* * Extract and skip the syslog prefix <[0-9]*>. Coming from userspace * the decimal value represents 32bit, the lower 3 bit are the log * level, the rest are the log facility. * * If no prefix or no userspace facility is specified, we * enforce LOG_USER, to be able to reliably distinguish * kernel-generated messages from userspace-injected ones. */ line = buf; if (line[0] == '<') { char *endp = NULL; unsigned int u; u = simple_strtoul(line + 1, &endp, 10); if (endp && endp[0] == '>') { level = LOG_LEVEL(u); if (LOG_FACILITY(u) != 0) facility = LOG_FACILITY(u); endp++; line = endp; } } devkmsg_emit(facility, level, "%s", line); kfree(buf); return ret; } static ssize_t devkmsg_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { struct devkmsg_user *user = file->private_data; struct printk_record *r = &user->record; size_t len; ssize_t ret; if (!user) return -EBADF; ret = mutex_lock_interruptible(&user->lock); if (ret) return ret; if (!prb_read_valid(prb, atomic64_read(&user->seq), r)) { if (file->f_flags & O_NONBLOCK) { ret = -EAGAIN; goto out; } /* * Guarantee this task is visible on the waitqueue before * checking the wake condition. * * The full memory barrier within set_current_state() of * prepare_to_wait_event() pairs with the full memory barrier * within wq_has_sleeper(). * * This pairs with __wake_up_klogd:A. */ ret = wait_event_interruptible(log_wait, prb_read_valid(prb, atomic64_read(&user->seq), r)); /* LMM(devkmsg_read:A) */ if (ret) goto out; } if (r->info->seq != atomic64_read(&user->seq)) { /* our last seen message is gone, return error and reset */ atomic64_set(&user->seq, r->info->seq); ret = -EPIPE; goto out; } len = info_print_ext_header(user->buf, sizeof(user->buf), r->info); len += msg_print_ext_body(user->buf + len, sizeof(user->buf) - len, &r->text_buf[0], r->info->text_len, &r->info->dev_info); atomic64_set(&user->seq, r->info->seq + 1); if (len > count) { ret = -EINVAL; goto out; } if (copy_to_user(buf, user->buf, len)) { ret = -EFAULT; goto out; } ret = len; out: mutex_unlock(&user->lock); return ret; } /* * Be careful when modifying this function!!! * * Only few operations are supported because the device works only with the * entire variable length messages (records). Non-standard values are * returned in the other cases and has been this way for quite some time. * User space applications might depend on this behavior. */ static loff_t devkmsg_llseek(struct file *file, loff_t offset, int whence) { struct devkmsg_user *user = file->private_data; loff_t ret = 0; if (!user) return -EBADF; if (offset) return -ESPIPE; switch (whence) { case SEEK_SET: /* the first record */ atomic64_set(&user->seq, prb_first_valid_seq(prb)); break; case SEEK_DATA: /* * The first record after the last SYSLOG_ACTION_CLEAR, * like issued by 'dmesg -c'. Reading /dev/kmsg itself * changes no global state, and does not clear anything. */ atomic64_set(&user->seq, latched_seq_read_nolock(&clear_seq)); break; case SEEK_END: /* after the last record */ atomic64_set(&user->seq, prb_next_seq(prb)); break; default: ret = -EINVAL; } return ret; } static __poll_t devkmsg_poll(struct file *file, poll_table *wait) { struct devkmsg_user *user = file->private_data; struct printk_info info; __poll_t ret = 0; if (!user) return EPOLLERR|EPOLLNVAL; poll_wait(file, &log_wait, wait); if (prb_read_valid_info(prb, atomic64_read(&user->seq), &info, NULL)) { /* return error when data has vanished underneath us */ if (info.seq != atomic64_read(&user->seq)) ret = EPOLLIN|EPOLLRDNORM|EPOLLERR|EPOLLPRI; else ret = EPOLLIN|EPOLLRDNORM; } return ret; } static int devkmsg_open(struct inode *inode, struct file *file) { struct devkmsg_user *user; int err; if (devkmsg_log & DEVKMSG_LOG_MASK_OFF) return -EPERM; /* write-only does not need any file context */ if ((file->f_flags & O_ACCMODE) != O_WRONLY) { err = check_syslog_permissions(SYSLOG_ACTION_READ_ALL, SYSLOG_FROM_READER); if (err) return err; } user = kmalloc(sizeof(struct devkmsg_user), GFP_KERNEL); if (!user) return -ENOMEM; ratelimit_default_init(&user->rs); ratelimit_set_flags(&user->rs, RATELIMIT_MSG_ON_RELEASE); mutex_init(&user->lock); prb_rec_init_rd(&user->record, &user->info, &user->text_buf[0], sizeof(user->text_buf)); atomic64_set(&user->seq, prb_first_valid_seq(prb)); file->private_data = user; return 0; } static int devkmsg_release(struct inode *inode, struct file *file) { struct devkmsg_user *user = file->private_data; if (!user) return 0; ratelimit_state_exit(&user->rs); mutex_destroy(&user->lock); kfree(user); return 0; } const struct file_operations kmsg_fops = { .open = devkmsg_open, .read = devkmsg_read, .write_iter = devkmsg_write, .llseek = devkmsg_llseek, .poll = devkmsg_poll, .release = devkmsg_release, }; #ifdef CONFIG_CRASH_CORE /* * This appends the listed symbols to /proc/vmcore * * /proc/vmcore is used by various utilities, like crash and makedumpfile to * obtain access to symbols that are otherwise very difficult to locate. These * symbols are specifically used so that utilities can access and extract the * dmesg log from a vmcore file after a crash. */ void log_buf_vmcoreinfo_setup(void) { struct dev_printk_info *dev_info = NULL; VMCOREINFO_SYMBOL(prb); VMCOREINFO_SYMBOL(printk_rb_static); VMCOREINFO_SYMBOL(clear_seq); /* * Export struct size and field offsets. User space tools can * parse it and detect any changes to structure down the line. */ VMCOREINFO_STRUCT_SIZE(printk_ringbuffer); VMCOREINFO_OFFSET(printk_ringbuffer, desc_ring); VMCOREINFO_OFFSET(printk_ringbuffer, text_data_ring); VMCOREINFO_OFFSET(printk_ringbuffer, fail); VMCOREINFO_STRUCT_SIZE(prb_desc_ring); VMCOREINFO_OFFSET(prb_desc_ring, count_bits); VMCOREINFO_OFFSET(prb_desc_ring, descs); VMCOREINFO_OFFSET(prb_desc_ring, infos); VMCOREINFO_OFFSET(prb_desc_ring, head_id); VMCOREINFO_OFFSET(prb_desc_ring, tail_id); VMCOREINFO_STRUCT_SIZE(prb_desc); VMCOREINFO_OFFSET(prb_desc, state_var); VMCOREINFO_OFFSET(prb_desc, text_blk_lpos); VMCOREINFO_STRUCT_SIZE(prb_data_blk_lpos); VMCOREINFO_OFFSET(prb_data_blk_lpos, begin); VMCOREINFO_OFFSET(prb_data_blk_lpos, next); VMCOREINFO_STRUCT_SIZE(printk_info); VMCOREINFO_OFFSET(printk_info, seq); VMCOREINFO_OFFSET(printk_info, ts_nsec); VMCOREINFO_OFFSET(printk_info, text_len); VMCOREINFO_OFFSET(printk_info, caller_id); VMCOREINFO_OFFSET(printk_info, dev_info); VMCOREINFO_STRUCT_SIZE(dev_printk_info); VMCOREINFO_OFFSET(dev_printk_info, subsystem); VMCOREINFO_LENGTH(printk_info_subsystem, sizeof(dev_info->subsystem)); VMCOREINFO_OFFSET(dev_printk_info, device); VMCOREINFO_LENGTH(printk_info_device, sizeof(dev_info->device)); VMCOREINFO_STRUCT_SIZE(prb_data_ring); VMCOREINFO_OFFSET(prb_data_ring, size_bits); VMCOREINFO_OFFSET(prb_data_ring, data); VMCOREINFO_OFFSET(prb_data_ring, head_lpos); VMCOREINFO_OFFSET(prb_data_ring, tail_lpos); VMCOREINFO_SIZE(atomic_long_t); VMCOREINFO_TYPE_OFFSET(atomic_long_t, counter); VMCOREINFO_STRUCT_SIZE(latched_seq); VMCOREINFO_OFFSET(latched_seq, val); } #endif /* requested log_buf_len from kernel cmdline */ static unsigned long __initdata new_log_buf_len; /* we practice scaling the ring buffer by powers of 2 */ static void __init log_buf_len_update(u64 size) { if (size > (u64)LOG_BUF_LEN_MAX) { size = (u64)LOG_BUF_LEN_MAX; pr_err("log_buf over 2G is not supported.\n"); } if (size) size = roundup_pow_of_two(size); if (size > log_buf_len) new_log_buf_len = (unsigned long)size; } /* save requested log_buf_len since it's too early to process it */ static int __init log_buf_len_setup(char *str) { u64 size; if (!str) return -EINVAL; size = memparse(str, &str); log_buf_len_update(size); return 0; } early_param("log_buf_len", log_buf_len_setup); #ifdef CONFIG_SMP #define __LOG_CPU_MAX_BUF_LEN (1 << CONFIG_LOG_CPU_MAX_BUF_SHIFT) static void __init log_buf_add_cpu(void) { unsigned int cpu_extra; /* * archs should set up cpu_possible_bits properly with * set_cpu_possible() after setup_arch() but just in * case lets ensure this is valid. */ if (num_possible_cpus() == 1) return; cpu_extra = (num_possible_cpus() - 1) * __LOG_CPU_MAX_BUF_LEN; /* by default this will only continue through for large > 64 CPUs */ if (cpu_extra <= __LOG_BUF_LEN / 2) return; pr_info("log_buf_len individual max cpu contribution: %d bytes\n", __LOG_CPU_MAX_BUF_LEN); pr_info("log_buf_len total cpu_extra contributions: %d bytes\n", cpu_extra); pr_info("log_buf_len min size: %d bytes\n", __LOG_BUF_LEN); log_buf_len_update(cpu_extra + __LOG_BUF_LEN); } #else /* !CONFIG_SMP */ static inline void log_buf_add_cpu(void) {} #endif /* CONFIG_SMP */ static void __init set_percpu_data_ready(void) { __printk_percpu_data_ready = true; } static unsigned int __init add_to_rb(struct printk_ringbuffer *rb, struct printk_record *r) { struct prb_reserved_entry e; struct printk_record dest_r; prb_rec_init_wr(&dest_r, r->info->text_len); if (!prb_reserve(&e, rb, &dest_r)) return 0; memcpy(&dest_r.text_buf[0], &r->text_buf[0], r->info->text_len); dest_r.info->text_len = r->info->text_len; dest_r.info->facility = r->info->facility; dest_r.info->level = r->info->level; dest_r.info->flags = r->info->flags; dest_r.info->ts_nsec = r->info->ts_nsec; dest_r.info->caller_id = r->info->caller_id; memcpy(&dest_r.info->dev_info, &r->info->dev_info, sizeof(dest_r.info->dev_info)); prb_final_commit(&e); return prb_record_text_space(&e); } static char setup_text_buf[LOG_LINE_MAX] __initdata; void __init setup_log_buf(int early) { struct printk_info *new_infos; unsigned int new_descs_count; struct prb_desc *new_descs; struct printk_info info; struct printk_record r; unsigned int text_size; size_t new_descs_size; size_t new_infos_size; unsigned long flags; char *new_log_buf; unsigned int free; u64 seq; /* * Some archs call setup_log_buf() multiple times - first is very * early, e.g. from setup_arch(), and second - when percpu_areas * are initialised. */ if (!early) set_percpu_data_ready(); if (log_buf != __log_buf) return; if (!early && !new_log_buf_len) log_buf_add_cpu(); if (!new_log_buf_len) return; new_descs_count = new_log_buf_len >> PRB_AVGBITS; if (new_descs_count == 0) { pr_err("new_log_buf_len: %lu too small\n", new_log_buf_len); return; } new_log_buf = memblock_alloc(new_log_buf_len, LOG_ALIGN); if (unlikely(!new_log_buf)) { pr_err("log_buf_len: %lu text bytes not available\n", new_log_buf_len); return; } new_descs_size = new_descs_count * sizeof(struct prb_desc); new_descs = memblock_alloc(new_descs_size, LOG_ALIGN); if (unlikely(!new_descs)) { pr_err("log_buf_len: %zu desc bytes not available\n", new_descs_size); goto err_free_log_buf; } new_infos_size = new_descs_count * sizeof(struct printk_info); new_infos = memblock_alloc(new_infos_size, LOG_ALIGN); if (unlikely(!new_infos)) { pr_err("log_buf_len: %zu info bytes not available\n", new_infos_size); goto err_free_descs; } prb_rec_init_rd(&r, &info, &setup_text_buf[0], sizeof(setup_text_buf)); prb_init(&printk_rb_dynamic, new_log_buf, ilog2(new_log_buf_len), new_descs, ilog2(new_descs_count), new_infos); local_irq_save(flags); log_buf_len = new_log_buf_len; log_buf = new_log_buf; new_log_buf_len = 0; free = __LOG_BUF_LEN; prb_for_each_record(0, &printk_rb_static, seq, &r) { text_size = add_to_rb(&printk_rb_dynamic, &r); if (text_size > free) free = 0; else free -= text_size; } prb = &printk_rb_dynamic; local_irq_restore(flags); /* * Copy any remaining messages that might have appeared from * NMI context after copying but before switching to the * dynamic buffer. */ prb_for_each_record(seq, &printk_rb_static, seq, &r) { text_size = add_to_rb(&printk_rb_dynamic, &r); if (text_size > free) free = 0; else free -= text_size; } if (seq != prb_next_seq(&printk_rb_static)) { pr_err("dropped %llu messages\n", prb_next_seq(&printk_rb_static) - seq); } pr_info("log_buf_len: %u bytes\n", log_buf_len); pr_info("early log buf free: %u(%u%%)\n", free, (free * 100) / __LOG_BUF_LEN); return; err_free_descs: memblock_free_ptr(new_descs, new_descs_size); err_free_log_buf: memblock_free_ptr(new_log_buf, new_log_buf_len); } static bool __read_mostly ignore_loglevel; static int __init ignore_loglevel_setup(char *str) { ignore_loglevel = true; pr_info("debug: ignoring loglevel setting.\n"); return 0; } early_param("ignore_loglevel", ignore_loglevel_setup); module_param(ignore_loglevel, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(ignore_loglevel, "ignore loglevel setting (prints all kernel messages to the console)"); static bool suppress_message_printing(int level) { return (level >= console_loglevel && !ignore_loglevel); } #ifdef CONFIG_BOOT_PRINTK_DELAY static int boot_delay; /* msecs delay after each printk during bootup */ static unsigned long long loops_per_msec; /* based on boot_delay */ static int __init boot_delay_setup(char *str) { unsigned long lpj; lpj = preset_lpj ? preset_lpj : 1000000; /* some guess */ loops_per_msec = (unsigned long long)lpj / 1000 * HZ; get_option(&str, &boot_delay); if (boot_delay > 10 * 1000) boot_delay = 0; pr_debug("boot_delay: %u, preset_lpj: %ld, lpj: %lu, " "HZ: %d, loops_per_msec: %llu\n", boot_delay, preset_lpj, lpj, HZ, loops_per_msec); return 0; } early_param("boot_delay", boot_delay_setup); static void boot_delay_msec(int level) { unsigned long long k; unsigned long timeout; if ((boot_delay == 0 || system_state >= SYSTEM_RUNNING) || suppress_message_printing(level)) { return; } k = (unsigned long long)loops_per_msec * boot_delay; timeout = jiffies + msecs_to_jiffies(boot_delay); while (k) { k--; cpu_relax(); /* * use (volatile) jiffies to prevent * compiler reduction; loop termination via jiffies * is secondary and may or may not happen. */ if (time_after(jiffies, timeout)) break; touch_nmi_watchdog(); } } #else static inline void boot_delay_msec(int level) { } #endif static bool printk_time = IS_ENABLED(CONFIG_PRINTK_TIME); module_param_named(time, printk_time, bool, S_IRUGO | S_IWUSR); static size_t print_syslog(unsigned int level, char *buf) { return sprintf(buf, "<%u>", level); } static size_t print_time(u64 ts, char *buf) { unsigned long rem_nsec = do_div(ts, 1000000000); return sprintf(buf, "[%5lu.%06lu]", (unsigned long)ts, rem_nsec / 1000); } #ifdef CONFIG_PRINTK_CALLER static size_t print_caller(u32 id, char *buf) { char caller[12]; snprintf(caller, sizeof(caller), "%c%u", id & 0x80000000 ? 'C' : 'T', id & ~0x80000000); return sprintf(buf, "[%6s]", caller); } #else #define print_caller(id, buf) 0 #endif static size_t info_print_prefix(const struct printk_info *info, bool syslog, bool time, char *buf) { size_t len = 0; if (syslog) len = print_syslog((info->facility << 3) | info->level, buf); if (time) len += print_time(info->ts_nsec, buf + len); len += print_caller(info->caller_id, buf + len); if (IS_ENABLED(CONFIG_PRINTK_CALLER) || time) { buf[len++] = ' '; buf[len] = '\0'; } return len; } /* * Prepare the record for printing. The text is shifted within the given * buffer to avoid a need for another one. The following operations are * done: * * - Add prefix for each line. * - Drop truncated lines that no longer fit into the buffer. * - Add the trailing newline that has been removed in vprintk_store(). * - Add a string terminator. * * Since the produced string is always terminated, the maximum possible * return value is @r->text_buf_size - 1; * * Return: The length of the updated/prepared text, including the added * prefixes and the newline. The terminator is not counted. The dropped * line(s) are not counted. */ static size_t record_print_text(struct printk_record *r, bool syslog, bool time) { size_t text_len = r->info->text_len; size_t buf_size = r->text_buf_size; char *text = r->text_buf; char prefix[PREFIX_MAX]; bool truncated = false; size_t prefix_len; size_t line_len; size_t len = 0; char *next; /* * If the message was truncated because the buffer was not large * enough, treat the available text as if it were the full text. */ if (text_len > buf_size) text_len = buf_size; prefix_len = info_print_prefix(r->info, syslog, time, prefix); /* * @text_len: bytes of unprocessed text * @line_len: bytes of current line _without_ newline * @text: pointer to beginning of current line * @len: number of bytes prepared in r->text_buf */ for (;;) { next = memchr(text, '\n', text_len); if (next) { line_len = next - text; } else { /* Drop truncated line(s). */ if (truncated) break; line_len = text_len; } /* * Truncate the text if there is not enough space to add the * prefix and a trailing newline and a terminator. */ if (len + prefix_len + text_len + 1 + 1 > buf_size) { /* Drop even the current line if no space. */ if (len + prefix_len + line_len + 1 + 1 > buf_size) break; text_len = buf_size - len - prefix_len - 1 - 1; truncated = true; } memmove(text + prefix_len, text, text_len); memcpy(text, prefix, prefix_len); /* * Increment the prepared length to include the text and * prefix that were just moved+copied. Also increment for the * newline at the end of this line. If this is the last line, * there is no newline, but it will be added immediately below. */ len += prefix_len + line_len + 1; if (text_len == line_len) { /* * This is the last line. Add the trailing newline * removed in vprintk_store(). */ text[prefix_len + line_len] = '\n'; break; } /* * Advance beyond the added prefix and the related line with * its newline. */ text += prefix_len + line_len + 1; /* * The remaining text has only decreased by the line with its * newline. * * Note that @text_len can become zero. It happens when @text * ended with a newline (either due to truncation or the * original string ending with "\n\n"). The loop is correctly * repeated and (if not truncated) an empty line with a prefix * will be prepared. */ text_len -= line_len + 1; } /* * If a buffer was provided, it will be terminated. Space for the * string terminator is guaranteed to be available. The terminator is * not counted in the return value. */ if (buf_size > 0) r->text_buf[len] = 0; return len; } static size_t get_record_print_text_size(struct printk_info *info, unsigned int line_count, bool syslog, bool time) { char prefix[PREFIX_MAX]; size_t prefix_len; prefix_len = info_print_prefix(info, syslog, time, prefix); /* * Each line will be preceded with a prefix. The intermediate * newlines are already within the text, but a final trailing * newline will be added. */ return ((prefix_len * line_count) + info->text_len + 1); } /* * Beginning with @start_seq, find the first record where it and all following * records up to (but not including) @max_seq fit into @size. * * @max_seq is simply an upper bound and does not need to exist. If the caller * does not require an upper bound, -1 can be used for @max_seq. */ static u64 find_first_fitting_seq(u64 start_seq, u64 max_seq, size_t size, bool syslog, bool time) { struct printk_info info; unsigned int line_count; size_t len = 0; u64 seq; /* Determine the size of the records up to @max_seq. */ prb_for_each_info(start_seq, prb, seq, &info, &line_count) { if (info.seq >= max_seq) break; len += get_record_print_text_size(&info, line_count, syslog, time); } /* * Adjust the upper bound for the next loop to avoid subtracting * lengths that were never added. */ if (seq < max_seq) max_seq = seq; /* * Move first record forward until length fits into the buffer. Ignore * newest messages that were not counted in the above cycle. Messages * might appear and get lost in the meantime. This is a best effort * that prevents an infinite loop that could occur with a retry. */ prb_for_each_info(start_seq, prb, seq, &info, &line_count) { if (len <= size || info.seq >= max_seq) break; len -= get_record_print_text_size(&info, line_count, syslog, time); } return seq; } /* The caller is responsible for making sure @size is greater than 0. */ static int syslog_print(char __user *buf, int size) { struct printk_info info; struct printk_record r; char *text; int len = 0; u64 seq; text = kmalloc(CONSOLE_LOG_MAX, GFP_KERNEL); if (!text) return -ENOMEM; prb_rec_init_rd(&r, &info, text, CONSOLE_LOG_MAX); mutex_lock(&syslog_lock); /* * Wait for the @syslog_seq record to be available. @syslog_seq may * change while waiting. */ do { seq = syslog_seq; mutex_unlock(&syslog_lock); /* * Guarantee this task is visible on the waitqueue before * checking the wake condition. * * The full memory barrier within set_current_state() of * prepare_to_wait_event() pairs with the full memory barrier * within wq_has_sleeper(). * * This pairs with __wake_up_klogd:A. */ len = wait_event_interruptible(log_wait, prb_read_valid(prb, seq, NULL)); /* LMM(syslog_print:A) */ mutex_lock(&syslog_lock); if (len) goto out; } while (syslog_seq != seq); /* * Copy records that fit into the buffer. The above cycle makes sure * that the first record is always available. */ do { size_t n; size_t skip; int err; if (!prb_read_valid(prb, syslog_seq, &r)) break; if (r.info->seq != syslog_seq) { /* message is gone, move to next valid one */ syslog_seq = r.info->seq; syslog_partial = 0; } /* * To keep reading/counting partial line consistent, * use printk_time value as of the beginning of a line. */ if (!syslog_partial) syslog_time = printk_time; skip = syslog_partial; n = record_print_text(&r, true, syslog_time); if (n - syslog_partial <= size) { /* message fits into buffer, move forward */ syslog_seq = r.info->seq + 1; n -= syslog_partial; syslog_partial = 0; } else if (!len){ /* partial read(), remember position */ n = size; syslog_partial += n; } else n = 0; if (!n) break; mutex_unlock(&syslog_lock); err = copy_to_user(buf, text + skip, n); mutex_lock(&syslog_lock); if (err) { if (!len) len = -EFAULT; break; } len += n; size -= n; buf += n; } while (size); out: mutex_unlock(&syslog_lock); kfree(text); return len; } static int syslog_print_all(char __user *buf, int size, bool clear) { struct printk_info info; struct printk_record r; char *text; int len = 0; u64 seq; bool time; text = kmalloc(CONSOLE_LOG_MAX, GFP_KERNEL); if (!text) return -ENOMEM; time = printk_time; /* * Find first record that fits, including all following records, * into the user-provided buffer for this dump. */ seq = find_first_fitting_seq(latched_seq_read_nolock(&clear_seq), -1, size, true, time); prb_rec_init_rd(&r, &info, text, CONSOLE_LOG_MAX); len = 0; prb_for_each_record(seq, prb, seq, &r) { int textlen; textlen = record_print_text(&r, true, time); if (len + textlen > size) { seq--; break; } if (copy_to_user(buf + len, text, textlen)) len = -EFAULT; else len += textlen; if (len < 0) break; } if (clear) { mutex_lock(&syslog_lock); latched_seq_write(&clear_seq, seq); mutex_unlock(&syslog_lock); } kfree(text); return len; } static void syslog_clear(void) { mutex_lock(&syslog_lock); latched_seq_write(&clear_seq, prb_next_seq(prb)); mutex_unlock(&syslog_lock); } int do_syslog(int type, char __user *buf, int len, int source) { struct printk_info info; bool clear = false; static int saved_console_loglevel = LOGLEVEL_DEFAULT; int error; error = check_syslog_permissions(type, source); if (error) return error; switch (type) { case SYSLOG_ACTION_CLOSE: /* Close log */ break; case SYSLOG_ACTION_OPEN: /* Open log */ break; case SYSLOG_ACTION_READ: /* Read from log */ if (!buf || len < 0) return -EINVAL; if (!len) return 0; if (!access_ok(buf, len)) return -EFAULT; error = syslog_print(buf, len); break; /* Read/clear last kernel messages */ case SYSLOG_ACTION_READ_CLEAR: clear = true; fallthrough; /* Read last kernel messages */ case SYSLOG_ACTION_READ_ALL: if (!buf || len < 0) return -EINVAL; if (!len) return 0; if (!access_ok(buf, len)) return -EFAULT; error = syslog_print_all(buf, len, clear); break; /* Clear ring buffer */ case SYSLOG_ACTION_CLEAR: syslog_clear(); break; /* Disable logging to console */ case SYSLOG_ACTION_CONSOLE_OFF: if (saved_console_loglevel == LOGLEVEL_DEFAULT) saved_console_loglevel = console_loglevel; console_loglevel = minimum_console_loglevel; break; /* Enable logging to console */ case SYSLOG_ACTION_CONSOLE_ON: if (saved_console_loglevel != LOGLEVEL_DEFAULT) { console_loglevel = saved_console_loglevel; saved_console_loglevel = LOGLEVEL_DEFAULT; } break; /* Set level of messages printed to console */ case SYSLOG_ACTION_CONSOLE_LEVEL: if (len < 1 || len > 8) return -EINVAL; if (len < minimum_console_loglevel) len = minimum_console_loglevel; console_loglevel = len; /* Implicitly re-enable logging to console */ saved_console_loglevel = LOGLEVEL_DEFAULT; break; /* Number of chars in the log buffer */ case SYSLOG_ACTION_SIZE_UNREAD: mutex_lock(&syslog_lock); if (!prb_read_valid_info(prb, syslog_seq, &info, NULL)) { /* No unread messages. */ mutex_unlock(&syslog_lock); return 0; } if (info.seq != syslog_seq) { /* messages are gone, move to first one */ syslog_seq = info.seq; syslog_partial = 0; } if (source == SYSLOG_FROM_PROC) { /* * Short-cut for poll(/"proc/kmsg") which simply checks * for pending data, not the size; return the count of * records, not the length. */ error = prb_next_seq(prb) - syslog_seq; } else { bool time = syslog_partial ? syslog_time : printk_time; unsigned int line_count; u64 seq; prb_for_each_info(syslog_seq, prb, seq, &info, &line_count) { error += get_record_print_text_size(&info, line_count, true, time); time = printk_time; } error -= syslog_partial; } mutex_unlock(&syslog_lock); break; /* Size of the log buffer */ case SYSLOG_ACTION_SIZE_BUFFER: error = log_buf_len; break; default: error = -EINVAL; break; } return error; } SYSCALL_DEFINE3(syslog, int, type, char __user *, buf, int, len) { return do_syslog(type, buf, len, SYSLOG_FROM_READER); } /* * Special console_lock variants that help to reduce the risk of soft-lockups. * They allow to pass console_lock to another printk() call using a busy wait. */ #ifdef CONFIG_LOCKDEP static struct lockdep_map console_owner_dep_map = { .name = "console_owner" }; #endif static DEFINE_RAW_SPINLOCK(console_owner_lock); static struct task_struct *console_owner; static bool console_waiter; /** * console_lock_spinning_enable - mark beginning of code where another * thread might safely busy wait * * This basically converts console_lock into a spinlock. This marks * the section where the console_lock owner can not sleep, because * there may be a waiter spinning (like a spinlock). Also it must be * ready to hand over the lock at the end of the section. */ static void console_lock_spinning_enable(void) { raw_spin_lock(&console_owner_lock); console_owner = current; raw_spin_unlock(&console_owner_lock); /* The waiter may spin on us after setting console_owner */ spin_acquire(&console_owner_dep_map, 0, 0, _THIS_IP_); } /** * console_lock_spinning_disable_and_check - mark end of code where another * thread was able to busy wait and check if there is a waiter * * This is called at the end of the section where spinning is allowed. * It has two functions. First, it is a signal that it is no longer * safe to start busy waiting for the lock. Second, it checks if * there is a busy waiter and passes the lock rights to her. * * Important: Callers lose the lock if there was a busy waiter. * They must not touch items synchronized by console_lock * in this case. * * Return: 1 if the lock rights were passed, 0 otherwise. */ static int console_lock_spinning_disable_and_check(void) { int waiter; raw_spin_lock(&console_owner_lock); waiter = READ_ONCE(console_waiter); console_owner = NULL; raw_spin_unlock(&console_owner_lock); if (!waiter) { spin_release(&console_owner_dep_map, _THIS_IP_); return 0; } /* The waiter is now free to continue */ WRITE_ONCE(console_waiter, false); spin_release(&console_owner_dep_map, _THIS_IP_); /* * Hand off console_lock to waiter. The waiter will perform * the up(). After this, the waiter is the console_lock owner. */ mutex_release(&console_lock_dep_map, _THIS_IP_); return 1; } /** * console_trylock_spinning - try to get console_lock by busy waiting * * This allows to busy wait for the console_lock when the current * owner is running in specially marked sections. It means that * the current owner is running and cannot reschedule until it * is ready to lose the lock. * * Return: 1 if we got the lock, 0 othrewise */ static int console_trylock_spinning(void) { struct task_struct *owner = NULL; bool waiter; bool spin = false; unsigned long flags; if (console_trylock()) return 1; printk_safe_enter_irqsave(flags); raw_spin_lock(&console_owner_lock); owner = READ_ONCE(console_owner); waiter = READ_ONCE(console_waiter); if (!waiter && owner && owner != current) { WRITE_ONCE(console_waiter, true); spin = true; } raw_spin_unlock(&console_owner_lock); /* * If there is an active printk() writing to the * consoles, instead of having it write our data too, * see if we can offload that load from the active * printer, and do some printing ourselves. * Go into a spin only if there isn't already a waiter * spinning, and there is an active printer, and * that active printer isn't us (recursive printk?). */ if (!spin) { printk_safe_exit_irqrestore(flags); return 0; } /* We spin waiting for the owner to release us */ spin_acquire(&console_owner_dep_map, 0, 0, _THIS_IP_); /* Owner will clear console_waiter on hand off */ while (READ_ONCE(console_waiter)) cpu_relax(); spin_release(&console_owner_dep_map, _THIS_IP_); printk_safe_exit_irqrestore(flags); /* * The owner passed the console lock to us. * Since we did not spin on console lock, annotate * this as a trylock. Otherwise lockdep will * complain. */ mutex_acquire(&console_lock_dep_map, 0, 1, _THIS_IP_); return 1; } /* * Call the console drivers, asking them to write out * log_buf[start] to log_buf[end - 1]. * The console_lock must be held. */ static void call_console_drivers(const char *ext_text, size_t ext_len, const char *text, size_t len) { static char dropped_text[64]; size_t dropped_len = 0; struct console *con; trace_console_rcuidle(text, len); if (!console_drivers) return; if (console_dropped) { dropped_len = snprintf(dropped_text, sizeof(dropped_text), "** %lu printk messages dropped **\n", console_dropped); console_dropped = 0; } for_each_console(con) { if (exclusive_console && con != exclusive_console) continue; if (!(con->flags & CON_ENABLED)) continue; if (!con->write) continue; if (!cpu_online(smp_processor_id()) && !(con->flags & CON_ANYTIME)) continue; if (con->flags & CON_EXTENDED) con->write(con, ext_text, ext_len); else { if (dropped_len) con->write(con, dropped_text, dropped_len); con->write(con, text, len); } } } /* * Recursion is tracked separately on each CPU. If NMIs are supported, an * additional NMI context per CPU is also separately tracked. Until per-CPU * is available, a separate "early tracking" is performed. */ static DEFINE_PER_CPU(u8, printk_count); static u8 printk_count_early; #ifdef CONFIG_HAVE_NMI static DEFINE_PER_CPU(u8, printk_count_nmi); static u8 printk_count_nmi_early; #endif /* * Recursion is limited to keep the output sane. printk() should not require * more than 1 level of recursion (allowing, for example, printk() to trigger * a WARN), but a higher value is used in case some printk-internal errors * exist, such as the ringbuffer validation checks failing. */ #define PRINTK_MAX_RECURSION 3 /* * Return a pointer to the dedicated counter for the CPU+context of the * caller. */ static u8 *__printk_recursion_counter(void) { #ifdef CONFIG_HAVE_NMI if (in_nmi()) { if (printk_percpu_data_ready()) return this_cpu_ptr(&printk_count_nmi); return &printk_count_nmi_early; } #endif if (printk_percpu_data_ready()) return this_cpu_ptr(&printk_count); return &printk_count_early; } /* * Enter recursion tracking. Interrupts are disabled to simplify tracking. * The caller must check the boolean return value to see if the recursion is * allowed. On failure, interrupts are not disabled. * * @recursion_ptr must be a variable of type (u8 *) and is the same variable * that is passed to printk_exit_irqrestore(). */ #define printk_enter_irqsave(recursion_ptr, flags) \ ({ \ bool success = true; \ \ typecheck(u8 *, recursion_ptr); \ local_irq_save(flags); \ (recursion_ptr) = __printk_recursion_counter(); \ if (*(recursion_ptr) > PRINTK_MAX_RECURSION) { \ local_irq_restore(flags); \ success = false; \ } else { \ (*(recursion_ptr))++; \ } \ success; \ }) /* Exit recursion tracking, restoring interrupts. */ #define printk_exit_irqrestore(recursion_ptr, flags) \ do { \ typecheck(u8 *, recursion_ptr); \ (*(recursion_ptr))--; \ local_irq_restore(flags); \ } while (0) int printk_delay_msec __read_mostly; static inline void printk_delay(void) { if (unlikely(printk_delay_msec)) { int m = printk_delay_msec; while (m--) { mdelay(1); touch_nmi_watchdog(); } } } static inline u32 printk_caller_id(void) { return in_task() ? task_pid_nr(current) : 0x80000000 + raw_smp_processor_id(); } /** * printk_parse_prefix - Parse level and control flags. * * @text: The terminated text message. * @level: A pointer to the current level value, will be updated. * @flags: A pointer to the current printk_info flags, will be updated. * * @level may be NULL if the caller is not interested in the parsed value. * Otherwise the variable pointed to by @level must be set to * LOGLEVEL_DEFAULT in order to be updated with the parsed value. * * @flags may be NULL if the caller is not interested in the parsed value. * Otherwise the variable pointed to by @flags will be OR'd with the parsed * value. * * Return: The length of the parsed level and control flags. */ u16 printk_parse_prefix(const char *text, int *level, enum printk_info_flags *flags) { u16 prefix_len = 0; int kern_level; while (*text) { kern_level = printk_get_level(text); if (!kern_level) break; switch (kern_level) { case '0' ... '7': if (level && *level == LOGLEVEL_DEFAULT) *level = kern_level - '0'; break; case 'c': /* KERN_CONT */ if (flags) *flags |= LOG_CONT; } prefix_len += 2; text += 2; } return prefix_len; } static u16 printk_sprint(char *text, u16 size, int facility, enum printk_info_flags *flags, const char *fmt, va_list args) { u16 text_len; text_len = vscnprintf(text, size, fmt, args); /* Mark and strip a trailing newline. */ if (text_len && text[text_len - 1] == '\n') { text_len--; *flags |= LOG_NEWLINE; } /* Strip log level and control flags. */ if (facility == 0) { u16 prefix_len; prefix_len = printk_parse_prefix(text, NULL, NULL); if (prefix_len) { text_len -= prefix_len; memmove(text, text + prefix_len, text_len); } } return text_len; } __printf(4, 0) int vprintk_store(int facility, int level, const struct dev_printk_info *dev_info, const char *fmt, va_list args) { const u32 caller_id = printk_caller_id(); struct prb_reserved_entry e; enum printk_info_flags flags = 0; struct printk_record r; unsigned long irqflags; u16 trunc_msg_len = 0; char prefix_buf[8]; u8 *recursion_ptr; u16 reserve_size; va_list args2; u16 text_len; int ret = 0; u64 ts_nsec; /* * Since the duration of printk() can vary depending on the message * and state of the ringbuffer, grab the timestamp now so that it is * close to the call of printk(). This provides a more deterministic * timestamp with respect to the caller. */ ts_nsec = local_clock(); if (!printk_enter_irqsave(recursion_ptr, irqflags)) return 0; /* * The sprintf needs to come first since the syslog prefix might be * passed in as a parameter. An extra byte must be reserved so that * later the vscnprintf() into the reserved buffer has room for the * terminating '\0', which is not counted by vsnprintf(). */ va_copy(args2, args); reserve_size = vsnprintf(&prefix_buf[0], sizeof(prefix_buf), fmt, args2) + 1; va_end(args2); if (reserve_size > LOG_LINE_MAX) reserve_size = LOG_LINE_MAX; /* Extract log level or control flags. */ if (facility == 0) printk_parse_prefix(&prefix_buf[0], &level, &flags); if (level == LOGLEVEL_DEFAULT) level = default_message_loglevel; if (dev_info) flags |= LOG_NEWLINE; if (flags & LOG_CONT) { prb_rec_init_wr(&r, reserve_size); if (prb_reserve_in_last(&e, prb, &r, caller_id, LOG_LINE_MAX)) { text_len = printk_sprint(&r.text_buf[r.info->text_len], reserve_size, facility, &flags, fmt, args); r.info->text_len += text_len; if (flags & LOG_NEWLINE) { r.info->flags |= LOG_NEWLINE; prb_final_commit(&e); } else { prb_commit(&e); } ret = text_len; goto out; } } /* * Explicitly initialize the record before every prb_reserve() call. * prb_reserve_in_last() and prb_reserve() purposely invalidate the * structure when they fail. */ prb_rec_init_wr(&r, reserve_size); if (!prb_reserve(&e, prb, &r)) { /* truncate the message if it is too long for empty buffer */ truncate_msg(&reserve_size, &trunc_msg_len); prb_rec_init_wr(&r, reserve_size + trunc_msg_len); if (!prb_reserve(&e, prb, &r)) goto out; } /* fill message */ text_len = printk_sprint(&r.text_buf[0], reserve_size, facility, &flags, fmt, args); if (trunc_msg_len) memcpy(&r.text_buf[text_len], trunc_msg, trunc_msg_len); r.info->text_len = text_len + trunc_msg_len; r.info->facility = facility; r.info->level = level & 7; r.info->flags = flags & 0x1f; r.info->ts_nsec = ts_nsec; r.info->caller_id = caller_id; if (dev_info) memcpy(&r.info->dev_info, dev_info, sizeof(r.info->dev_info)); /* A message without a trailing newline can be continued. */ if (!(flags & LOG_NEWLINE)) prb_commit(&e); else prb_final_commit(&e); ret = text_len + trunc_msg_len; out: printk_exit_irqrestore(recursion_ptr, irqflags); return ret; } asmlinkage int vprintk_emit(int facility, int level, const struct dev_printk_info *dev_info, const char *fmt, va_list args) { int printed_len; bool in_sched = false; /* Suppress unimportant messages after panic happens */ if (unlikely(suppress_printk)) return 0; if (level == LOGLEVEL_SCHED) { level = LOGLEVEL_DEFAULT; in_sched = true; } boot_delay_msec(level); printk_delay(); printed_len = vprintk_store(facility, level, dev_info, fmt, args); /* If called from the scheduler, we can not call up(). */ if (!in_sched) { /* * Disable preemption to avoid being preempted while holding * console_sem which would prevent anyone from printing to * console */ preempt_disable(); /* * Try to acquire and then immediately release the console * semaphore. The release will print out buffers and wake up * /dev/kmsg and syslog() users. */ if (console_trylock_spinning()) console_unlock(); preempt_enable(); } wake_up_klogd(); return printed_len; } EXPORT_SYMBOL(vprintk_emit); int vprintk_default(const char *fmt, va_list args) { return vprintk_emit(0, LOGLEVEL_DEFAULT, NULL, fmt, args); } EXPORT_SYMBOL_GPL(vprintk_default); asmlinkage __visible int _printk(const char *fmt, ...) { va_list args; int r; va_start(args, fmt); r = vprintk(fmt, args); va_end(args); return r; } EXPORT_SYMBOL(_printk); #ifdef CONFIG_AVM_DEBUG static int force_printk_avm = 0; static bool no_avm_printk = false; core_param(no_avm_printk, no_avm_printk, bool, 0644); #define FORCE_PRINTK_LINUX_FACILITIES_VALUE 0x100 asmlinkage int printk_linux(const char *fmt, ...) { va_list args; int r; va_start(args, fmt); r = vprintk_emit(FORCE_PRINTK_LINUX_FACILITIES_VALUE, -1, NULL, fmt, args); va_end(args); return r; } EXPORT_SYMBOL(printk_linux); /*--------------------------------------------------------------------------------*\ * ret: old-mode: 1 bended, 0: std.printk \*--------------------------------------------------------------------------------*/ int printk_avm_console_bend(unsigned int activate) { int ret = 0; ret = force_printk_avm; if (activate && no_avm_printk) pr_notice_once("AVM printk disabled by cmdline (no_avm_printk)\n"); else force_printk_avm = activate ? 1 : 0; return ret; } EXPORT_SYMBOL(printk_avm_console_bend); #endif /* CONFIG_AVM_DEBUG */ #else /* CONFIG_PRINTK */ #define CONSOLE_LOG_MAX 0 #define printk_time false #define prb_read_valid(rb, seq, r) false #define prb_first_valid_seq(rb) 0 static u64 syslog_seq; static u64 console_seq; static u64 exclusive_console_stop_seq; static unsigned long console_dropped; static size_t record_print_text(const struct printk_record *r, bool syslog, bool time) { return 0; } static ssize_t info_print_ext_header(char *buf, size_t size, struct printk_info *info) { return 0; } static ssize_t msg_print_ext_body(char *buf, size_t size, char *text, size_t text_len, struct dev_printk_info *dev_info) { return 0; } static void console_lock_spinning_enable(void) { } static int console_lock_spinning_disable_and_check(void) { return 0; } static void call_console_drivers(const char *ext_text, size_t ext_len, const char *text, size_t len) {} static bool suppress_message_printing(int level) { return false; } #endif /* CONFIG_PRINTK */ #ifdef CONFIG_EARLY_PRINTK struct console *early_console; asmlinkage __visible void early_printk(const char *fmt, ...) { va_list ap; char buf[512]; int n; if (!early_console) return; va_start(ap, fmt); n = vscnprintf(buf, sizeof(buf), fmt, ap); va_end(ap); early_console->write(early_console, buf, n); } #endif static int __add_preferred_console(char *name, int idx, char *options, char *brl_options, bool user_specified) { struct console_cmdline *c; int i; /* * See if this tty is not yet registered, and * if we have a slot free. */ for (i = 0, c = console_cmdline; i < MAX_CMDLINECONSOLES && c->name[0]; i++, c++) { if (strcmp(c->name, name) == 0 && c->index == idx) { if (!brl_options) preferred_console = i; if (user_specified) c->user_specified = true; return 0; } } if (i == MAX_CMDLINECONSOLES) return -E2BIG; if (!brl_options) preferred_console = i; strlcpy(c->name, name, sizeof(c->name)); c->options = options; c->user_specified = user_specified; braille_set_options(c, brl_options); c->index = idx; return 0; } static int __init console_msg_format_setup(char *str) { if (!strcmp(str, "syslog")) console_msg_format = MSG_FORMAT_SYSLOG; if (!strcmp(str, "default")) console_msg_format = MSG_FORMAT_DEFAULT; return 1; } __setup("console_msg_format=", console_msg_format_setup); /* * Set up a console. Called via do_early_param() in init/main.c * for each "console=" parameter in the boot command line. */ static int __init console_setup(char *str) { char buf[sizeof(console_cmdline[0].name) + 4]; /* 4 for "ttyS" */ char *s, *options, *brl_options = NULL; int idx; /* * console="" or console=null have been suggested as a way to * disable console output. Use ttynull that has been created * for exactly this purpose. */ if (str[0] == 0 || strcmp(str, "null") == 0) { __add_preferred_console("ttynull", 0, NULL, NULL, true); return 1; } if (_braille_console_setup(&str, &brl_options)) return 1; /* * Decode str into name, index, options. */ if (str[0] >= '0' && str[0] <= '9') { strcpy(buf, "ttyS"); strncpy(buf + 4, str, sizeof(buf) - 5); } else { strncpy(buf, str, sizeof(buf) - 1); } buf[sizeof(buf) - 1] = 0; options = strchr(str, ','); if (options) *(options++) = 0; #ifdef __sparc__ if (!strcmp(str, "ttya")) strcpy(buf, "ttyS0"); if (!strcmp(str, "ttyb")) strcpy(buf, "ttyS1"); #endif for (s = buf; *s; s++) if (isdigit(*s) || *s == ',') break; idx = simple_strtoul(s, NULL, 10); *s = 0; __add_preferred_console(buf, idx, options, brl_options, true); console_set_on_cmdline = 1; return 1; } __setup("console=", console_setup); /** * add_preferred_console - add a device to the list of preferred consoles. * @name: device name * @idx: device index * @options: options for this console * * The last preferred console added will be used for kernel messages * and stdin/out/err for init. Normally this is used by console_setup * above to handle user-supplied console arguments; however it can also * be used by arch-specific code either to override the user or more * commonly to provide a default console (ie from PROM variables) when * the user has not supplied one. */ int add_preferred_console(char *name, int idx, char *options) { return __add_preferred_console(name, idx, options, NULL, false); } bool console_suspend_enabled = true; EXPORT_SYMBOL(console_suspend_enabled); static int __init console_suspend_disable(char *str) { console_suspend_enabled = false; return 1; } __setup("no_console_suspend", console_suspend_disable); module_param_named(console_suspend, console_suspend_enabled, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(console_suspend, "suspend console during suspend" " and hibernate operations"); static bool printk_console_no_auto_verbose; void console_verbose(void) { if (console_loglevel && !printk_console_no_auto_verbose) console_loglevel = CONSOLE_LOGLEVEL_MOTORMOUTH; } EXPORT_SYMBOL_GPL(console_verbose); module_param_named(console_no_auto_verbose, printk_console_no_auto_verbose, bool, 0644); MODULE_PARM_DESC(console_no_auto_verbose, "Disable console loglevel raise to highest on oops/panic/etc"); /** * suspend_console - suspend the console subsystem * * This disables printk() while we go into suspend states */ void suspend_console(void) { if (!console_suspend_enabled) return; pr_info("Suspending console(s) (use no_console_suspend to debug)\n"); console_lock(); console_suspended = 1; up_console_sem(); } void resume_console(void) { if (!console_suspend_enabled) return; down_console_sem(); console_suspended = 0; console_unlock(); } /** * console_cpu_notify - print deferred console messages after CPU hotplug * @cpu: unused * * If printk() is called from a CPU that is not online yet, the messages * will be printed on the console only if there are CON_ANYTIME consoles. * This function is called when a new CPU comes online (or fails to come * up) or goes offline. */ static int console_cpu_notify(unsigned int cpu) { if (!cpuhp_tasks_frozen) { /* If trylock fails, someone else is doing the printing */ if (console_trylock()) console_unlock(); } return 0; } /** * console_lock - lock the console system for exclusive use. * * Acquires a lock which guarantees that the caller has * exclusive access to the console system and the console_drivers list. * * Can sleep, returns nothing. */ void console_lock(void) { might_sleep(); down_console_sem(); if (console_suspended) return; console_locked = 1; console_may_schedule = 1; } EXPORT_SYMBOL(console_lock); /** * console_trylock - try to lock the console system for exclusive use. * * Try to acquire a lock which guarantees that the caller has exclusive * access to the console system and the console_drivers list. * * returns 1 on success, and 0 on failure to acquire the lock. */ int console_trylock(void) { if (down_trylock_console_sem()) return 0; if (console_suspended) { up_console_sem(); return 0; } console_locked = 1; console_may_schedule = 0; return 1; } EXPORT_SYMBOL(console_trylock); int is_console_locked(void) { return console_locked; } EXPORT_SYMBOL(is_console_locked); /* * Check if we have any console that is capable of printing while cpu is * booting or shutting down. Requires console_sem. */ static int have_callable_console(void) { struct console *con; for_each_console(con) if ((con->flags & CON_ENABLED) && (con->flags & CON_ANYTIME)) return 1; return 0; } /* * Can we actually use the console at this time on this cpu? * * Console drivers may assume that per-cpu resources have been allocated. So * unless they're explicitly marked as being able to cope (CON_ANYTIME) don't * call them until this CPU is officially up. */ static inline int can_use_console(void) { return cpu_online(raw_smp_processor_id()) || have_callable_console(); } /** * console_unlock - unlock the console system * * Releases the console_lock which the caller holds on the console system * and the console driver list. * * While the console_lock was held, console output may have been buffered * by printk(). If this is the case, console_unlock(); emits * the output prior to releasing the lock. * * If there is output waiting, we wake /dev/kmsg and syslog() users. * * console_unlock(); may be called from any context. */ void console_unlock(void) { static char ext_text[CONSOLE_EXT_LOG_MAX]; static char text[CONSOLE_LOG_MAX]; unsigned long flags; bool do_cond_resched, retry; struct printk_info info; struct printk_record r; u64 __maybe_unused next_seq; if (console_suspended) { up_console_sem(); return; } prb_rec_init_rd(&r, &info, text, sizeof(text)); /* * Console drivers are called with interrupts disabled, so * @console_may_schedule should be cleared before; however, we may * end up dumping a lot of lines, for example, if called from * console registration path, and should invoke cond_resched() * between lines if allowable. Not doing so can cause a very long * scheduling stall on a slow console leading to RCU stall and * softlockup warnings which exacerbate the issue with more * messages practically incapacitating the system. * * console_trylock() is not able to detect the preemptive * context reliably. Therefore the value must be stored before * and cleared after the "again" goto label. */ do_cond_resched = console_may_schedule; again: console_may_schedule = 0; /* * We released the console_sem lock, so we need to recheck if * cpu is online and (if not) is there at least one CON_ANYTIME * console. */ if (!can_use_console()) { console_locked = 0; up_console_sem(); return; } for (;;) { size_t ext_len = 0; int handover; size_t len; skip: if (!prb_read_valid(prb, console_seq, &r)) break; if (console_seq != r.info->seq) { console_dropped += r.info->seq - console_seq; console_seq = r.info->seq; } if (suppress_message_printing(r.info->level)) { /* * Skip record we have buffered and already printed * directly to the console when we received it, and * record that has level above the console loglevel. */ console_seq++; goto skip; } /* Output to all consoles once old messages replayed. */ if (unlikely(exclusive_console && console_seq >= exclusive_console_stop_seq)) { exclusive_console = NULL; } /* * Handle extended console text first because later * record_print_text() will modify the record buffer in-place. */ if (nr_ext_console_drivers) { ext_len = info_print_ext_header(ext_text, sizeof(ext_text), r.info); ext_len += msg_print_ext_body(ext_text + ext_len, sizeof(ext_text) - ext_len, &r.text_buf[0], r.info->text_len, &r.info->dev_info); } len = record_print_text(&r, console_msg_format & MSG_FORMAT_SYSLOG, printk_time); console_seq++; /* * While actively printing out messages, if another printk() * were to occur on another CPU, it may wait for this one to * finish. This task can not be preempted if there is a * waiter waiting to take over. * * Interrupts are disabled because the hand over to a waiter * must not be interrupted until the hand over is completed * (@console_waiter is cleared). */ printk_safe_enter_irqsave(flags); console_lock_spinning_enable(); stop_critical_timings(); /* don't trace print latency */ call_console_drivers(ext_text, ext_len, text, len); start_critical_timings(); handover = console_lock_spinning_disable_and_check(); printk_safe_exit_irqrestore(flags); if (handover) return; if (do_cond_resched) cond_resched(); } /* Get consistent value of the next-to-be-used sequence number. */ next_seq = console_seq; console_locked = 0; up_console_sem(); /* * Someone could have filled up the buffer again, so re-check if there's * something to flush. In case we cannot trylock the console_sem again, * there's a new owner and the console_unlock() from them will do the * flush, no worries. */ retry = prb_read_valid(prb, next_seq, NULL); if (retry && console_trylock()) goto again; } EXPORT_SYMBOL(console_unlock); /** * console_conditional_schedule - yield the CPU if required * * If the console code is currently allowed to sleep, and * if this CPU should yield the CPU to another task, do * so here. * * Must be called within console_lock();. */ void __sched console_conditional_schedule(void) { if (console_may_schedule) cond_resched(); } EXPORT_SYMBOL(console_conditional_schedule); void console_unblank(void) { struct console *c; /* * console_unblank can no longer be called in interrupt context unless * oops_in_progress is set to 1.. */ if (oops_in_progress) { if (down_trylock_console_sem() != 0) return; } else console_lock(); console_locked = 1; console_may_schedule = 0; for_each_console(c) if ((c->flags & CON_ENABLED) && c->unblank) c->unblank(); console_unlock(); } /** * console_flush_on_panic - flush console content on panic * @mode: flush all messages in buffer or just the pending ones * * Immediately output all pending messages no matter what. */ void console_flush_on_panic(enum con_flush_mode mode) { /* * If someone else is holding the console lock, trylock will fail * and may_schedule may be set. Ignore and proceed to unlock so * that messages are flushed out. As this can be called from any * context and we don't want to get preempted while flushing, * ensure may_schedule is cleared. */ console_trylock(); console_may_schedule = 0; if (mode == CONSOLE_REPLAY_ALL) console_seq = prb_first_valid_seq(prb); console_unlock(); } /* * Return the console tty driver structure and its associated index */ struct tty_driver *console_device(int *index) { struct console *c; struct tty_driver *driver = NULL; console_lock(); for_each_console(c) { if (!c->device) continue; driver = c->device(c, index); if (driver) break; } console_unlock(); return driver; } /* * Prevent further output on the passed console device so that (for example) * serial drivers can disable console output before suspending a port, and can * re-enable output afterwards. */ void console_stop(struct console *console) { console_lock(); console->flags &= ~CON_ENABLED; console_unlock(); } EXPORT_SYMBOL(console_stop); void console_start(struct console *console) { console_lock(); console->flags |= CON_ENABLED; console_unlock(); } EXPORT_SYMBOL(console_start); static int __read_mostly keep_bootcon; static int __init keep_bootcon_setup(char *str) { keep_bootcon = 1; pr_info("debug: skip boot console de-registration.\n"); return 0; } early_param("keep_bootcon", keep_bootcon_setup); /* * This is called by register_console() to try to match * the newly registered console with any of the ones selected * by either the command line or add_preferred_console() and * setup/enable it. * * Care need to be taken with consoles that are statically * enabled such as netconsole */ static int try_enable_new_console(struct console *newcon, bool user_specified) { struct console_cmdline *c; int i, err; for (i = 0, c = console_cmdline; i < MAX_CMDLINECONSOLES && c->name[0]; i++, c++) { if (c->user_specified != user_specified) continue; if (!newcon->match || newcon->match(newcon, c->name, c->index, c->options) != 0) { /* default matching */ BUILD_BUG_ON(sizeof(c->name) != sizeof(newcon->name)); if (strcmp(c->name, newcon->name) != 0) continue; if (newcon->index >= 0 && newcon->index != c->index) continue; if (newcon->index < 0) newcon->index = c->index; if (_braille_register_console(newcon, c)) return 0; if (newcon->setup && (err = newcon->setup(newcon, c->options)) != 0) return err; } newcon->flags |= CON_ENABLED; if (i == preferred_console) { newcon->flags |= CON_CONSDEV; has_preferred_console = true; } return 0; } /* * Some consoles, such as pstore and netconsole, can be enabled even * without matching. Accept the pre-enabled consoles only when match() * and setup() had a chance to be called. */ if (newcon->flags & CON_ENABLED && c->user_specified == user_specified) return 0; return -ENOENT; } /* * The console driver calls this routine during kernel initialization * to register the console printing procedure with printk() and to * print any messages that were printed by the kernel before the * console driver was initialized. * * This can happen pretty early during the boot process (because of * early_printk) - sometimes before setup_arch() completes - be careful * of what kernel features are used - they may not be initialised yet. * * There are two types of consoles - bootconsoles (early_printk) and * "real" consoles (everything which is not a bootconsole) which are * handled differently. * - Any number of bootconsoles can be registered at any time. * - As soon as a "real" console is registered, all bootconsoles * will be unregistered automatically. * - Once a "real" console is registered, any attempt to register a * bootconsoles will be rejected */ void register_console(struct console *newcon) { struct console *bcon = NULL; int err; for_each_console(bcon) { if (WARN(bcon == newcon, "console '%s%d' already registered\n", bcon->name, bcon->index)) return; } /* * before we register a new CON_BOOT console, make sure we don't * already have a valid console */ if (newcon->flags & CON_BOOT) { for_each_console(bcon) { if (!(bcon->flags & CON_BOOT)) { pr_info("Too late to register bootconsole %s%d\n", newcon->name, newcon->index); return; } } } if (console_drivers && console_drivers->flags & CON_BOOT) bcon = console_drivers; if (!has_preferred_console || bcon || !console_drivers) has_preferred_console = preferred_console >= 0; /* * See if we want to use this console driver. If we * didn't select a console we take the first one * that registers here. */ if (!has_preferred_console) { if (newcon->index < 0) newcon->index = 0; if (newcon->setup == NULL || newcon->setup(newcon, NULL) == 0) { newcon->flags |= CON_ENABLED; if (newcon->device) { newcon->flags |= CON_CONSDEV; has_preferred_console = true; } } } /* See if this console matches one we selected on the command line */ err = try_enable_new_console(newcon, true); /* If not, try to match against the platform default(s) */ if (err == -ENOENT) err = try_enable_new_console(newcon, false); /* printk() messages are not printed to the Braille console. */ if (err || newcon->flags & CON_BRL) return; /* * If we have a bootconsole, and are switching to a real console, * don't print everything out again, since when the boot console, and * the real console are the same physical device, it's annoying to * see the beginning boot messages twice */ if (bcon && ((newcon->flags & (CON_CONSDEV | CON_BOOT)) == CON_CONSDEV)) newcon->flags &= ~CON_PRINTBUFFER; /* * Put this console in the list - keep the * preferred driver at the head of the list. */ console_lock(); if ((newcon->flags & CON_CONSDEV) || console_drivers == NULL) { newcon->next = console_drivers; console_drivers = newcon; if (newcon->next) newcon->next->flags &= ~CON_CONSDEV; /* Ensure this flag is always set for the head of the list */ newcon->flags |= CON_CONSDEV; } else { newcon->next = console_drivers->next; console_drivers->next = newcon; } if (newcon->flags & CON_EXTENDED) nr_ext_console_drivers++; if (newcon->flags & CON_PRINTBUFFER) { /* * console_unlock(); will print out the buffered messages * for us. * * We're about to replay the log buffer. Only do this to the * just-registered console to avoid excessive message spam to * the already-registered consoles. * * Set exclusive_console with disabled interrupts to reduce * race window with eventual console_flush_on_panic() that * ignores console_lock. */ exclusive_console = newcon; exclusive_console_stop_seq = console_seq; /* Get a consistent copy of @syslog_seq. */ mutex_lock(&syslog_lock); console_seq = syslog_seq; mutex_unlock(&syslog_lock); } console_unlock(); console_sysfs_notify(); /* * By unregistering the bootconsoles after we enable the real console * we get the "console xxx enabled" message on all the consoles - * boot consoles, real consoles, etc - this is to ensure that end * users know there might be something in the kernel's log buffer that * went to the bootconsole (that they do not see on the real console) */ pr_info("%sconsole [%s%d] enabled\n", (newcon->flags & CON_BOOT) ? "boot" : "" , newcon->name, newcon->index); if (bcon && ((newcon->flags & (CON_CONSDEV | CON_BOOT)) == CON_CONSDEV) && !keep_bootcon) { /* We need to iterate through all boot consoles, to make * sure we print everything out, before we unregister them. */ for_each_console(bcon) if (bcon->flags & CON_BOOT) unregister_console(bcon); } } EXPORT_SYMBOL(register_console); int unregister_console(struct console *console) { struct console *con; int res; pr_info("%sconsole [%s%d] disabled\n", (console->flags & CON_BOOT) ? "boot" : "" , console->name, console->index); res = _braille_unregister_console(console); if (res < 0) return res; if (res > 0) return 0; res = -ENODEV; console_lock(); if (console_drivers == console) { console_drivers=console->next; res = 0; } else { for_each_console(con) { if (con->next == console) { con->next = console->next; res = 0; break; } } } if (res) goto out_disable_unlock; if (console->flags & CON_EXTENDED) nr_ext_console_drivers--; /* * If this isn't the last console and it has CON_CONSDEV set, we * need to set it on the next preferred console. */ if (console_drivers != NULL && console->flags & CON_CONSDEV) console_drivers->flags |= CON_CONSDEV; console->flags &= ~CON_ENABLED; console_unlock(); console_sysfs_notify(); if (console->exit) res = console->exit(console); return res; out_disable_unlock: console->flags &= ~CON_ENABLED; console_unlock(); return res; } EXPORT_SYMBOL(unregister_console); /* * Initialize the console device. This is called *early*, so * we can't necessarily depend on lots of kernel help here. * Just do some early initializations, and do the complex setup * later. */ void __init console_init(void) { int ret; initcall_t call; initcall_entry_t *ce; /* Setup the default TTY line discipline. */ n_tty_init(); /* * set up the console device so that later boot sequences can * inform about problems etc.. */ ce = __con_initcall_start; trace_initcall_level("console"); while (ce < __con_initcall_end) { call = initcall_from_entry(ce); trace_initcall_start(call); ret = call(); trace_initcall_finish(call, ret); ce++; } } /* * Some boot consoles access data that is in the init section and which will * be discarded after the initcalls have been run. To make sure that no code * will access this data, unregister the boot consoles in a late initcall. * * If for some reason, such as deferred probe or the driver being a loadable * module, the real console hasn't registered yet at this point, there will * be a brief interval in which no messages are logged to the console, which * makes it difficult to diagnose problems that occur during this time. * * To mitigate this problem somewhat, only unregister consoles whose memory * intersects with the init section. Note that all other boot consoles will * get unregistered when the real preferred console is registered. */ static int __init printk_late_init(void) { struct console *con; int ret; for_each_console(con) { if (!(con->flags & CON_BOOT)) continue; /* Check addresses that might be used for enabled consoles. */ if (init_section_intersects(con, sizeof(*con)) || init_section_contains(con->write, 0) || init_section_contains(con->read, 0) || init_section_contains(con->device, 0) || init_section_contains(con->unblank, 0) || init_section_contains(con->data, 0)) { /* * Please, consider moving the reported consoles out * of the init section. */ pr_warn("bootconsole [%s%d] uses init memory and must be disabled even before the real one is ready\n", con->name, con->index); unregister_console(con); } } ret = cpuhp_setup_state_nocalls(CPUHP_PRINTK_DEAD, "printk:dead", NULL, console_cpu_notify); WARN_ON(ret < 0); ret = cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN, "printk:online", console_cpu_notify, NULL); WARN_ON(ret < 0); return 0; } late_initcall(printk_late_init); #if defined CONFIG_PRINTK /* * Delayed printk version, for scheduler-internal messages: */ #define PRINTK_PENDING_WAKEUP 0x01 #define PRINTK_PENDING_OUTPUT 0x02 static DEFINE_PER_CPU(int, printk_pending); static void wake_up_klogd_work_func(struct irq_work *irq_work) { int pending = this_cpu_xchg(printk_pending, 0); if (pending & PRINTK_PENDING_OUTPUT) { /* If trylock fails, someone else is doing the printing */ if (console_trylock()) console_unlock(); } if (pending & PRINTK_PENDING_WAKEUP) wake_up_interruptible(&log_wait); } static DEFINE_PER_CPU(struct irq_work, wake_up_klogd_work) = IRQ_WORK_INIT_LAZY(wake_up_klogd_work_func); static void __wake_up_klogd(int val) { if (!printk_percpu_data_ready()) return; preempt_disable(); /* * Guarantee any new records can be seen by tasks preparing to wait * before this context checks if the wait queue is empty. * * The full memory barrier within wq_has_sleeper() pairs with the full * memory barrier within set_current_state() of * prepare_to_wait_event(), which is called after ___wait_event() adds * the waiter but before it has checked the wait condition. * * This pairs with devkmsg_read:A and syslog_print:A. */ if (wq_has_sleeper(&log_wait) || /* LMM(__wake_up_klogd:A) */ (val & PRINTK_PENDING_OUTPUT)) { this_cpu_or(printk_pending, val); irq_work_queue(this_cpu_ptr(&wake_up_klogd_work)); } preempt_enable(); } void wake_up_klogd(void) { __wake_up_klogd(PRINTK_PENDING_WAKEUP); } void defer_console_output(void) { /* * New messages may have been added directly to the ringbuffer * using vprintk_store(), so wake any waiters as well. */ __wake_up_klogd(PRINTK_PENDING_WAKEUP | PRINTK_PENDING_OUTPUT); } void printk_trigger_flush(void) { defer_console_output(); } int vprintk_deferred(const char *fmt, va_list args) { int r; r = vprintk_emit(0, LOGLEVEL_SCHED, NULL, fmt, args); defer_console_output(); return r; } int _printk_deferred(const char *fmt, ...) { va_list args; int r; va_start(args, fmt); r = vprintk_deferred(fmt, args); va_end(args); return r; } /* * printk rate limiting, lifted from the networking subsystem. * * This enforces a rate limit: not more than 10 kernel messages * every 5s to make a denial-of-service attack impossible. */ DEFINE_RATELIMIT_STATE(printk_ratelimit_state, 5 * HZ, 10); int __printk_ratelimit(const char *func) { return ___ratelimit(&printk_ratelimit_state, func); } EXPORT_SYMBOL(__printk_ratelimit); /** * printk_timed_ratelimit - caller-controlled printk ratelimiting * @caller_jiffies: pointer to caller's state * @interval_msecs: minimum interval between prints * * printk_timed_ratelimit() returns true if more than @interval_msecs * milliseconds have elapsed since the last time printk_timed_ratelimit() * returned true. */ bool printk_timed_ratelimit(unsigned long *caller_jiffies, unsigned int interval_msecs) { unsigned long elapsed = jiffies - *caller_jiffies; if (*caller_jiffies && elapsed <= msecs_to_jiffies(interval_msecs)) return false; *caller_jiffies = jiffies; return true; } EXPORT_SYMBOL(printk_timed_ratelimit); static DEFINE_SPINLOCK(dump_list_lock); static LIST_HEAD(dump_list); #if defined(CONFIG_AVM_DEBUG) /* AVM/TLG: TODO: Better use the function from avm_sammel */ bool kmsg_dump_get_buffer_nocontext(bool syslog, char *buf, size_t size, size_t *len) { struct kmsg_dump_iter iter; kmsg_dump_rewind(&iter); return kmsg_dump_get_buffer(&iter, 0, buf, size, len); } #endif/*--- #if defined(CONFIG_AVM_DEBUG) ---*/ /** * kmsg_dump_register - register a kernel log dumper. * @dumper: pointer to the kmsg_dumper structure * * Adds a kernel log dumper to the system. The dump callback in the * structure will be called when the kernel oopses or panics and must be * set. Returns zero on success and %-EINVAL or %-EBUSY otherwise. */ int kmsg_dump_register(struct kmsg_dumper *dumper) { unsigned long flags; int err = -EBUSY; /* The dump callback needs to be set */ if (!dumper->dump) return -EINVAL; spin_lock_irqsave(&dump_list_lock, flags); /* Don't allow registering multiple times */ if (!dumper->registered) { dumper->registered = 1; list_add_tail_rcu(&dumper->list, &dump_list); err = 0; } spin_unlock_irqrestore(&dump_list_lock, flags); return err; } EXPORT_SYMBOL_GPL(kmsg_dump_register); /** * kmsg_dump_unregister - unregister a kmsg dumper. * @dumper: pointer to the kmsg_dumper structure * * Removes a dump device from the system. Returns zero on success and * %-EINVAL otherwise. */ int kmsg_dump_unregister(struct kmsg_dumper *dumper) { unsigned long flags; int err = -EINVAL; spin_lock_irqsave(&dump_list_lock, flags); if (dumper->registered) { dumper->registered = 0; list_del_rcu(&dumper->list); err = 0; } spin_unlock_irqrestore(&dump_list_lock, flags); synchronize_rcu(); return err; } EXPORT_SYMBOL_GPL(kmsg_dump_unregister); static bool always_kmsg_dump; module_param_named(always_kmsg_dump, always_kmsg_dump, bool, S_IRUGO | S_IWUSR); const char *kmsg_dump_reason_str(enum kmsg_dump_reason reason) { switch (reason) { case KMSG_DUMP_PANIC: return "Panic"; case KMSG_DUMP_OOPS: return "Oops"; case KMSG_DUMP_EMERG: return "Emergency"; case KMSG_DUMP_SHUTDOWN: return "Shutdown"; default: return "Unknown"; } } EXPORT_SYMBOL_GPL(kmsg_dump_reason_str); /** * kmsg_dump - dump kernel log to kernel message dumpers. * @reason: the reason (oops, panic etc) for dumping * * Call each of the registered dumper's dump() callback, which can * retrieve the kmsg records with kmsg_dump_get_line() or * kmsg_dump_get_buffer(). */ void kmsg_dump(enum kmsg_dump_reason reason) { struct kmsg_dumper *dumper; rcu_read_lock(); list_for_each_entry_rcu(dumper, &dump_list, list) { enum kmsg_dump_reason max_reason = dumper->max_reason; /* * If client has not provided a specific max_reason, default * to KMSG_DUMP_OOPS, unless always_kmsg_dump was set. */ if (max_reason == KMSG_DUMP_UNDEF) { max_reason = always_kmsg_dump ? KMSG_DUMP_MAX : KMSG_DUMP_OOPS; } if (reason > max_reason) continue; /* invoke dumper which will iterate over records */ dumper->dump(dumper, reason); } rcu_read_unlock(); } /** * kmsg_dump_get_line - retrieve one kmsg log line * @iter: kmsg dump iterator * @syslog: include the "<4>" prefixes * @line: buffer to copy the line to * @size: maximum size of the buffer * @len: length of line placed into buffer * * Start at the beginning of the kmsg buffer, with the oldest kmsg * record, and copy one record into the provided buffer. * * Consecutive calls will return the next available record moving * towards the end of the buffer with the youngest messages. * * A return value of FALSE indicates that there are no more records to * read. */ bool kmsg_dump_get_line(struct kmsg_dump_iter *iter, bool syslog, char *line, size_t size, size_t *len) { u64 min_seq = latched_seq_read_nolock(&clear_seq); struct printk_info info; unsigned int line_count; struct printk_record r; size_t l = 0; bool ret = false; if (iter->cur_seq < min_seq) iter->cur_seq = min_seq; prb_rec_init_rd(&r, &info, line, size); /* Read text or count text lines? */ if (line) { if (!prb_read_valid(prb, iter->cur_seq, &r)) goto out; l = record_print_text(&r, syslog, printk_time); } else { if (!prb_read_valid_info(prb, iter->cur_seq, &info, &line_count)) { goto out; } l = get_record_print_text_size(&info, line_count, syslog, printk_time); } iter->cur_seq = r.info->seq + 1; ret = true; out: if (len) *len = l; return ret; } EXPORT_SYMBOL_GPL(kmsg_dump_get_line); /** * kmsg_dump_get_buffer - copy kmsg log lines * @iter: kmsg dump iterator * @syslog: include the "<4>" prefixes * @buf: buffer to copy the line to * @size: maximum size of the buffer * @len_out: length of line placed into buffer * * Start at the end of the kmsg buffer and fill the provided buffer * with as many of the *youngest* kmsg records that fit into it. * If the buffer is large enough, all available kmsg records will be * copied with a single call. * * Consecutive calls will fill the buffer with the next block of * available older records, not including the earlier retrieved ones. * * A return value of FALSE indicates that there are no more records to * read. */ bool kmsg_dump_get_buffer(struct kmsg_dump_iter *iter, bool syslog, char *buf, size_t size, size_t *len_out) { u64 min_seq = latched_seq_read_nolock(&clear_seq); struct printk_info info; struct printk_record r; u64 seq; u64 next_seq; size_t len = 0; bool ret = false; bool time = printk_time; if (!buf || !size) goto out; if (iter->cur_seq < min_seq) iter->cur_seq = min_seq; if (prb_read_valid_info(prb, iter->cur_seq, &info, NULL)) { if (info.seq != iter->cur_seq) { /* messages are gone, move to first available one */ iter->cur_seq = info.seq; } } /* last entry */ if (iter->cur_seq >= iter->next_seq) goto out; /* * Find first record that fits, including all following records, * into the user-provided buffer for this dump. Pass in size-1 * because this function (by way of record_print_text()) will * not write more than size-1 bytes of text into @buf. */ seq = find_first_fitting_seq(iter->cur_seq, iter->next_seq, size - 1, syslog, time); /* * Next kmsg_dump_get_buffer() invocation will dump block of * older records stored right before this one. */ next_seq = seq; prb_rec_init_rd(&r, &info, buf, size); len = 0; prb_for_each_record(seq, prb, seq, &r) { if (r.info->seq >= iter->next_seq) break; len += record_print_text(&r, syslog, time); /* Adjust record to store to remaining buffer space. */ prb_rec_init_rd(&r, &info, buf + len, size - len); } iter->next_seq = next_seq; ret = true; out: if (len_out) *len_out = len; return ret; } EXPORT_SYMBOL_GPL(kmsg_dump_get_buffer); /** * kmsg_dump_rewind - reset the iterator * @iter: kmsg dump iterator * * Reset the dumper's iterator so that kmsg_dump_get_line() and * kmsg_dump_get_buffer() can be called again and used multiple * times within the same dumper.dump() callback. */ void kmsg_dump_rewind(struct kmsg_dump_iter *iter) { iter->cur_seq = latched_seq_read_nolock(&clear_seq); iter->next_seq = prb_next_seq(prb); } EXPORT_SYMBOL_GPL(kmsg_dump_rewind); #endif #ifdef CONFIG_SMP static atomic_t printk_cpulock_owner = ATOMIC_INIT(-1); static atomic_t printk_cpulock_nested = ATOMIC_INIT(0); /** * __printk_wait_on_cpu_lock() - Busy wait until the printk cpu-reentrant * spinning lock is not owned by any CPU. * * Context: Any context. */ void __printk_wait_on_cpu_lock(void) { do { cpu_relax(); } while (atomic_read(&printk_cpulock_owner) != -1); } EXPORT_SYMBOL(__printk_wait_on_cpu_lock); /** * __printk_cpu_trylock() - Try to acquire the printk cpu-reentrant * spinning lock. * * If no processor has the lock, the calling processor takes the lock and * becomes the owner. If the calling processor is already the owner of the * lock, this function succeeds immediately. * * Context: Any context. Expects interrupts to be disabled. * Return: 1 on success, otherwise 0. */ int __printk_cpu_trylock(void) { int cpu; int old; cpu = smp_processor_id(); /* * Guarantee loads and stores from this CPU when it is the lock owner * are _not_ visible to the previous lock owner. This pairs with * __printk_cpu_unlock:B. * * Memory barrier involvement: * * If __printk_cpu_trylock:A reads from __printk_cpu_unlock:B, then * __printk_cpu_unlock:A can never read from __printk_cpu_trylock:B. * * Relies on: * * RELEASE from __printk_cpu_unlock:A to __printk_cpu_unlock:B * of the previous CPU * matching * ACQUIRE from __printk_cpu_trylock:A to __printk_cpu_trylock:B * of this CPU */ old = atomic_cmpxchg_acquire(&printk_cpulock_owner, -1, cpu); /* LMM(__printk_cpu_trylock:A) */ if (old == -1) { /* * This CPU is now the owner and begins loading/storing * data: LMM(__printk_cpu_trylock:B) */ return 1; } else if (old == cpu) { /* This CPU is already the owner. */ atomic_inc(&printk_cpulock_nested); return 1; } return 0; } EXPORT_SYMBOL(__printk_cpu_trylock); /** * __printk_cpu_unlock() - Release the printk cpu-reentrant spinning lock. * * The calling processor must be the owner of the lock. * * Context: Any context. Expects interrupts to be disabled. */ void __printk_cpu_unlock(void) { if (atomic_read(&printk_cpulock_nested)) { atomic_dec(&printk_cpulock_nested); return; } /* * This CPU is finished loading/storing data: * LMM(__printk_cpu_unlock:A) */ /* * Guarantee loads and stores from this CPU when it was the * lock owner are visible to the next lock owner. This pairs * with __printk_cpu_trylock:A. * * Memory barrier involvement: * * If __printk_cpu_trylock:A reads from __printk_cpu_unlock:B, * then __printk_cpu_trylock:B reads from __printk_cpu_unlock:A. * * Relies on: * * RELEASE from __printk_cpu_unlock:A to __printk_cpu_unlock:B * of this CPU * matching * ACQUIRE from __printk_cpu_trylock:A to __printk_cpu_trylock:B * of the next CPU */ atomic_set_release(&printk_cpulock_owner, -1); /* LMM(__printk_cpu_unlock:B) */ } EXPORT_SYMBOL(__printk_cpu_unlock); #endif /* CONFIG_SMP */