/* * Copyright (c) 2006-2008 Intel Corporation * Copyright (c) 2007 Dave Airlie * Copyright (c) 2008 Red Hat Inc. * * DRM core CRTC related functions * * Permission to use, copy, modify, distribute, and sell this software and its * documentation for any purpose is hereby granted without fee, provided that * the above copyright notice appear in all copies and that both that copyright * notice and this permission notice appear in supporting documentation, and * that the name of the copyright holders not be used in advertising or * publicity pertaining to distribution of the software without specific, * written prior permission. The copyright holders make no representations * about the suitability of this software for any purpose. It is provided "as * is" without express or implied warranty. * * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE * OF THIS SOFTWARE. * * Authors: * Keith Packard * Eric Anholt * Dave Airlie * Jesse Barnes */ #include #include #include #include #include #include #include #include #include #include #include #include #include "drm_crtc_internal.h" #include "drm_internal.h" /* * Global properties */ static const struct drm_prop_enum_list drm_plane_type_enum_list[] = { { DRM_PLANE_TYPE_OVERLAY, "Overlay" }, { DRM_PLANE_TYPE_PRIMARY, "Primary" }, { DRM_PLANE_TYPE_CURSOR, "Cursor" }, }; /* * Optional properties */ /** * drm_crtc_force_disable - Forcibly turn off a CRTC * @crtc: CRTC to turn off * * Returns: * Zero on success, error code on failure. */ int drm_crtc_force_disable(struct drm_crtc *crtc) { struct drm_mode_set set = { .crtc = crtc, }; return drm_mode_set_config_internal(&set); } EXPORT_SYMBOL(drm_crtc_force_disable); /** * drm_crtc_force_disable_all - Forcibly turn off all enabled CRTCs * @dev: DRM device whose CRTCs to turn off * * Drivers may want to call this on unload to ensure that all displays are * unlit and the GPU is in a consistent, low power state. Takes modeset locks. * * Returns: * Zero on success, error code on failure. */ int drm_crtc_force_disable_all(struct drm_device *dev) { struct drm_crtc *crtc; int ret = 0; drm_modeset_lock_all(dev); drm_for_each_crtc(crtc, dev) if (crtc->enabled) { ret = drm_crtc_force_disable(crtc); if (ret) goto out; } out: drm_modeset_unlock_all(dev); return ret; } EXPORT_SYMBOL(drm_crtc_force_disable_all); DEFINE_WW_CLASS(crtc_ww_class); static unsigned int drm_num_crtcs(struct drm_device *dev) { unsigned int num = 0; struct drm_crtc *tmp; drm_for_each_crtc(tmp, dev) { num++; } return num; } static int drm_crtc_register_all(struct drm_device *dev) { struct drm_crtc *crtc; int ret = 0; drm_for_each_crtc(crtc, dev) { if (crtc->funcs->late_register) ret = crtc->funcs->late_register(crtc); if (ret) return ret; } return 0; } static void drm_crtc_unregister_all(struct drm_device *dev) { struct drm_crtc *crtc; drm_for_each_crtc(crtc, dev) { if (crtc->funcs->early_unregister) crtc->funcs->early_unregister(crtc); } } /** * drm_crtc_init_with_planes - Initialise a new CRTC object with * specified primary and cursor planes. * @dev: DRM device * @crtc: CRTC object to init * @primary: Primary plane for CRTC * @cursor: Cursor plane for CRTC * @funcs: callbacks for the new CRTC * @name: printf style format string for the CRTC name, or NULL for default name * * Inits a new object created as base part of a driver crtc object. Drivers * should use this function instead of drm_crtc_init(), which is only provided * for backwards compatibility with drivers which do not yet support universal * planes). For really simple hardware which has only 1 plane look at * drm_simple_display_pipe_init() instead. * * Returns: * Zero on success, error code on failure. */ int drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc, struct drm_plane *primary, struct drm_plane *cursor, const struct drm_crtc_funcs *funcs, const char *name, ...) { struct drm_mode_config *config = &dev->mode_config; int ret; WARN_ON(primary && primary->type != DRM_PLANE_TYPE_PRIMARY); WARN_ON(cursor && cursor->type != DRM_PLANE_TYPE_CURSOR); crtc->dev = dev; crtc->funcs = funcs; INIT_LIST_HEAD(&crtc->commit_list); spin_lock_init(&crtc->commit_lock); drm_modeset_lock_init(&crtc->mutex); ret = drm_mode_object_get(dev, &crtc->base, DRM_MODE_OBJECT_CRTC); if (ret) return ret; if (name) { va_list ap; va_start(ap, name); crtc->name = kvasprintf(GFP_KERNEL, name, ap); va_end(ap); } else { crtc->name = kasprintf(GFP_KERNEL, "crtc-%d", drm_num_crtcs(dev)); } if (!crtc->name) { drm_mode_object_unregister(dev, &crtc->base); return -ENOMEM; } crtc->base.properties = &crtc->properties; list_add_tail(&crtc->head, &config->crtc_list); crtc->index = config->num_crtc++; crtc->primary = primary; crtc->cursor = cursor; if (primary) primary->possible_crtcs = 1 << drm_crtc_index(crtc); if (cursor) cursor->possible_crtcs = 1 << drm_crtc_index(crtc); if (drm_core_check_feature(dev, DRIVER_ATOMIC)) { drm_object_attach_property(&crtc->base, config->prop_active, 0); drm_object_attach_property(&crtc->base, config->prop_mode_id, 0); } return 0; } EXPORT_SYMBOL(drm_crtc_init_with_planes); /** * drm_crtc_cleanup - Clean up the core crtc usage * @crtc: CRTC to cleanup * * This function cleans up @crtc and removes it from the DRM mode setting * core. Note that the function does *not* free the crtc structure itself, * this is the responsibility of the caller. */ void drm_crtc_cleanup(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; /* Note that the crtc_list is considered to be static; should we * remove the drm_crtc at runtime we would have to decrement all * the indices on the drm_crtc after us in the crtc_list. */ kfree(crtc->gamma_store); crtc->gamma_store = NULL; drm_modeset_lock_fini(&crtc->mutex); drm_mode_object_unregister(dev, &crtc->base); list_del(&crtc->head); dev->mode_config.num_crtc--; WARN_ON(crtc->state && !crtc->funcs->atomic_destroy_state); if (crtc->state && crtc->funcs->atomic_destroy_state) crtc->funcs->atomic_destroy_state(crtc, crtc->state); kfree(crtc->name); memset(crtc, 0, sizeof(*crtc)); } EXPORT_SYMBOL(drm_crtc_cleanup); int drm_modeset_register_all(struct drm_device *dev) { int ret; ret = drm_plane_register_all(dev); if (ret) goto err_plane; ret = drm_crtc_register_all(dev); if (ret) goto err_crtc; ret = drm_encoder_register_all(dev); if (ret) goto err_encoder; ret = drm_connector_register_all(dev); if (ret) goto err_connector; return 0; err_connector: drm_encoder_unregister_all(dev); err_encoder: drm_crtc_unregister_all(dev); err_crtc: drm_plane_unregister_all(dev); err_plane: return ret; } void drm_modeset_unregister_all(struct drm_device *dev) { drm_connector_unregister_all(dev); drm_encoder_unregister_all(dev); drm_crtc_unregister_all(dev); drm_plane_unregister_all(dev); } static int drm_mode_create_standard_properties(struct drm_device *dev) { struct drm_property *prop; int ret; ret = drm_connector_create_standard_properties(dev); if (ret) return ret; prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE, "type", drm_plane_type_enum_list, ARRAY_SIZE(drm_plane_type_enum_list)); if (!prop) return -ENOMEM; dev->mode_config.plane_type_property = prop; prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC, "SRC_X", 0, UINT_MAX); if (!prop) return -ENOMEM; dev->mode_config.prop_src_x = prop; prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC, "SRC_Y", 0, UINT_MAX); if (!prop) return -ENOMEM; dev->mode_config.prop_src_y = prop; prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC, "SRC_W", 0, UINT_MAX); if (!prop) return -ENOMEM; dev->mode_config.prop_src_w = prop; prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC, "SRC_H", 0, UINT_MAX); if (!prop) return -ENOMEM; dev->mode_config.prop_src_h = prop; prop = drm_property_create_signed_range(dev, DRM_MODE_PROP_ATOMIC, "CRTC_X", INT_MIN, INT_MAX); if (!prop) return -ENOMEM; dev->mode_config.prop_crtc_x = prop; prop = drm_property_create_signed_range(dev, DRM_MODE_PROP_ATOMIC, "CRTC_Y", INT_MIN, INT_MAX); if (!prop) return -ENOMEM; dev->mode_config.prop_crtc_y = prop; prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC, "CRTC_W", 0, INT_MAX); if (!prop) return -ENOMEM; dev->mode_config.prop_crtc_w = prop; prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC, "CRTC_H", 0, INT_MAX); if (!prop) return -ENOMEM; dev->mode_config.prop_crtc_h = prop; prop = drm_property_create_object(dev, DRM_MODE_PROP_ATOMIC, "FB_ID", DRM_MODE_OBJECT_FB); if (!prop) return -ENOMEM; dev->mode_config.prop_fb_id = prop; prop = drm_property_create_object(dev, DRM_MODE_PROP_ATOMIC, "CRTC_ID", DRM_MODE_OBJECT_CRTC); if (!prop) return -ENOMEM; dev->mode_config.prop_crtc_id = prop; prop = drm_property_create_bool(dev, DRM_MODE_PROP_ATOMIC, "ACTIVE"); if (!prop) return -ENOMEM; dev->mode_config.prop_active = prop; prop = drm_property_create(dev, DRM_MODE_PROP_ATOMIC | DRM_MODE_PROP_BLOB, "MODE_ID", 0); if (!prop) return -ENOMEM; dev->mode_config.prop_mode_id = prop; prop = drm_property_create(dev, DRM_MODE_PROP_BLOB, "DEGAMMA_LUT", 0); if (!prop) return -ENOMEM; dev->mode_config.degamma_lut_property = prop; prop = drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE, "DEGAMMA_LUT_SIZE", 0, UINT_MAX); if (!prop) return -ENOMEM; dev->mode_config.degamma_lut_size_property = prop; prop = drm_property_create(dev, DRM_MODE_PROP_BLOB, "CTM", 0); if (!prop) return -ENOMEM; dev->mode_config.ctm_property = prop; prop = drm_property_create(dev, DRM_MODE_PROP_BLOB, "GAMMA_LUT", 0); if (!prop) return -ENOMEM; dev->mode_config.gamma_lut_property = prop; prop = drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE, "GAMMA_LUT_SIZE", 0, UINT_MAX); if (!prop) return -ENOMEM; dev->mode_config.gamma_lut_size_property = prop; return 0; } /** * drm_mode_getresources - get graphics configuration * @dev: drm device for the ioctl * @data: data pointer for the ioctl * @file_priv: drm file for the ioctl call * * Construct a set of configuration description structures and return * them to the user, including CRTC, connector and framebuffer configuration. * * Called by the user via ioctl. * * Returns: * Zero on success, negative errno on failure. */ int drm_mode_getresources(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_mode_card_res *card_res = data; struct list_head *lh; struct drm_framebuffer *fb; struct drm_connector *connector; struct drm_crtc *crtc; struct drm_encoder *encoder; int ret = 0; int connector_count = 0; int crtc_count = 0; int fb_count = 0; int encoder_count = 0; int copied = 0; uint32_t __user *fb_id; uint32_t __user *crtc_id; uint32_t __user *connector_id; uint32_t __user *encoder_id; if (!drm_core_check_feature(dev, DRIVER_MODESET)) return -EINVAL; mutex_lock(&file_priv->fbs_lock); /* * For the non-control nodes we need to limit the list of resources * by IDs in the group list for this node */ list_for_each(lh, &file_priv->fbs) fb_count++; /* handle this in 4 parts */ /* FBs */ if (card_res->count_fbs >= fb_count) { copied = 0; fb_id = (uint32_t __user *)(unsigned long)card_res->fb_id_ptr; list_for_each_entry(fb, &file_priv->fbs, filp_head) { if (put_user(fb->base.id, fb_id + copied)) { mutex_unlock(&file_priv->fbs_lock); return -EFAULT; } copied++; } } card_res->count_fbs = fb_count; mutex_unlock(&file_priv->fbs_lock); /* mode_config.mutex protects the connector list against e.g. DP MST * connector hot-adding. CRTC/Plane lists are invariant. */ mutex_lock(&dev->mode_config.mutex); drm_for_each_crtc(crtc, dev) crtc_count++; drm_for_each_connector(connector, dev) connector_count++; drm_for_each_encoder(encoder, dev) encoder_count++; card_res->max_height = dev->mode_config.max_height; card_res->min_height = dev->mode_config.min_height; card_res->max_width = dev->mode_config.max_width; card_res->min_width = dev->mode_config.min_width; /* CRTCs */ if (card_res->count_crtcs >= crtc_count) { copied = 0; crtc_id = (uint32_t __user *)(unsigned long)card_res->crtc_id_ptr; drm_for_each_crtc(crtc, dev) { if (put_user(crtc->base.id, crtc_id + copied)) { ret = -EFAULT; goto out; } copied++; } } card_res->count_crtcs = crtc_count; /* Encoders */ if (card_res->count_encoders >= encoder_count) { copied = 0; encoder_id = (uint32_t __user *)(unsigned long)card_res->encoder_id_ptr; drm_for_each_encoder(encoder, dev) { if (put_user(encoder->base.id, encoder_id + copied)) { ret = -EFAULT; goto out; } copied++; } } card_res->count_encoders = encoder_count; /* Connectors */ if (card_res->count_connectors >= connector_count) { copied = 0; connector_id = (uint32_t __user *)(unsigned long)card_res->connector_id_ptr; drm_for_each_connector(connector, dev) { if (put_user(connector->base.id, connector_id + copied)) { ret = -EFAULT; goto out; } copied++; } } card_res->count_connectors = connector_count; out: mutex_unlock(&dev->mode_config.mutex); return ret; } /** * drm_mode_getcrtc - get CRTC configuration * @dev: drm device for the ioctl * @data: data pointer for the ioctl * @file_priv: drm file for the ioctl call * * Construct a CRTC configuration structure to return to the user. * * Called by the user via ioctl. * * Returns: * Zero on success, negative errno on failure. */ int drm_mode_getcrtc(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_mode_crtc *crtc_resp = data; struct drm_crtc *crtc; if (!drm_core_check_feature(dev, DRIVER_MODESET)) return -EINVAL; crtc = drm_crtc_find(dev, crtc_resp->crtc_id); if (!crtc) return -ENOENT; drm_modeset_lock_crtc(crtc, crtc->primary); crtc_resp->gamma_size = crtc->gamma_size; if (crtc->primary->fb) crtc_resp->fb_id = crtc->primary->fb->base.id; else crtc_resp->fb_id = 0; if (crtc->state) { crtc_resp->x = crtc->primary->state->src_x >> 16; crtc_resp->y = crtc->primary->state->src_y >> 16; if (crtc->state->enable) { drm_mode_convert_to_umode(&crtc_resp->mode, &crtc->state->mode); crtc_resp->mode_valid = 1; } else { crtc_resp->mode_valid = 0; } } else { crtc_resp->x = crtc->x; crtc_resp->y = crtc->y; if (crtc->enabled) { drm_mode_convert_to_umode(&crtc_resp->mode, &crtc->mode); crtc_resp->mode_valid = 1; } else { crtc_resp->mode_valid = 0; } } drm_modeset_unlock_crtc(crtc); return 0; } /** * drm_mode_set_config_internal - helper to call ->set_config * @set: modeset config to set * * This is a little helper to wrap internal calls to the ->set_config driver * interface. The only thing it adds is correct refcounting dance. * * Returns: * Zero on success, negative errno on failure. */ int drm_mode_set_config_internal(struct drm_mode_set *set) { struct drm_crtc *crtc = set->crtc; struct drm_framebuffer *fb; struct drm_crtc *tmp; int ret; /* * NOTE: ->set_config can also disable other crtcs (if we steal all * connectors from it), hence we need to refcount the fbs across all * crtcs. Atomic modeset will have saner semantics ... */ drm_for_each_crtc(tmp, crtc->dev) tmp->primary->old_fb = tmp->primary->fb; fb = set->fb; ret = crtc->funcs->set_config(set); if (ret == 0) { crtc->primary->crtc = crtc; crtc->primary->fb = fb; } drm_for_each_crtc(tmp, crtc->dev) { if (tmp->primary->fb) drm_framebuffer_reference(tmp->primary->fb); if (tmp->primary->old_fb) drm_framebuffer_unreference(tmp->primary->old_fb); tmp->primary->old_fb = NULL; } return ret; } EXPORT_SYMBOL(drm_mode_set_config_internal); /** * drm_crtc_get_hv_timing - Fetches hdisplay/vdisplay for given mode * @mode: mode to query * @hdisplay: hdisplay value to fill in * @vdisplay: vdisplay value to fill in * * The vdisplay value will be doubled if the specified mode is a stereo mode of * the appropriate layout. */ void drm_crtc_get_hv_timing(const struct drm_display_mode *mode, int *hdisplay, int *vdisplay) { struct drm_display_mode adjusted; drm_mode_copy(&adjusted, mode); drm_mode_set_crtcinfo(&adjusted, CRTC_STEREO_DOUBLE_ONLY); *hdisplay = adjusted.crtc_hdisplay; *vdisplay = adjusted.crtc_vdisplay; } EXPORT_SYMBOL(drm_crtc_get_hv_timing); /** * drm_crtc_check_viewport - Checks that a framebuffer is big enough for the * CRTC viewport * @crtc: CRTC that framebuffer will be displayed on * @x: x panning * @y: y panning * @mode: mode that framebuffer will be displayed under * @fb: framebuffer to check size of */ int drm_crtc_check_viewport(const struct drm_crtc *crtc, int x, int y, const struct drm_display_mode *mode, const struct drm_framebuffer *fb) { int hdisplay, vdisplay; drm_crtc_get_hv_timing(mode, &hdisplay, &vdisplay); if (crtc->state && crtc->primary->state->rotation & (DRM_ROTATE_90 | DRM_ROTATE_270)) swap(hdisplay, vdisplay); return drm_framebuffer_check_src_coords(x << 16, y << 16, hdisplay << 16, vdisplay << 16, fb); } EXPORT_SYMBOL(drm_crtc_check_viewport); /** * drm_mode_setcrtc - set CRTC configuration * @dev: drm device for the ioctl * @data: data pointer for the ioctl * @file_priv: drm file for the ioctl call * * Build a new CRTC configuration based on user request. * * Called by the user via ioctl. * * Returns: * Zero on success, negative errno on failure. */ int drm_mode_setcrtc(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_mode_config *config = &dev->mode_config; struct drm_mode_crtc *crtc_req = data; struct drm_crtc *crtc; struct drm_connector **connector_set = NULL, *connector; struct drm_framebuffer *fb = NULL; struct drm_display_mode *mode = NULL; struct drm_mode_set set; uint32_t __user *set_connectors_ptr; int ret; int i; if (!drm_core_check_feature(dev, DRIVER_MODESET)) return -EINVAL; /* * Universal plane src offsets are only 16.16, prevent havoc for * drivers using universal plane code internally. */ if (crtc_req->x & 0xffff0000 || crtc_req->y & 0xffff0000) return -ERANGE; drm_modeset_lock_all(dev); crtc = drm_crtc_find(dev, crtc_req->crtc_id); if (!crtc) { DRM_DEBUG_KMS("Unknown CRTC ID %d\n", crtc_req->crtc_id); ret = -ENOENT; goto out; } DRM_DEBUG_KMS("[CRTC:%d:%s]\n", crtc->base.id, crtc->name); if (crtc_req->mode_valid) { /* If we have a mode we need a framebuffer. */ /* If we pass -1, set the mode with the currently bound fb */ if (crtc_req->fb_id == -1) { if (!crtc->primary->fb) { DRM_DEBUG_KMS("CRTC doesn't have current FB\n"); ret = -EINVAL; goto out; } fb = crtc->primary->fb; /* Make refcounting symmetric with the lookup path. */ drm_framebuffer_reference(fb); } else { fb = drm_framebuffer_lookup(dev, crtc_req->fb_id); if (!fb) { DRM_DEBUG_KMS("Unknown FB ID%d\n", crtc_req->fb_id); ret = -ENOENT; goto out; } } mode = drm_mode_create(dev); if (!mode) { ret = -ENOMEM; goto out; } ret = drm_mode_convert_umode(mode, &crtc_req->mode); if (ret) { DRM_DEBUG_KMS("Invalid mode\n"); goto out; } /* * Check whether the primary plane supports the fb pixel format. * Drivers not implementing the universal planes API use a * default formats list provided by the DRM core which doesn't * match real hardware capabilities. Skip the check in that * case. */ if (!crtc->primary->format_default) { ret = drm_plane_check_pixel_format(crtc->primary, fb->pixel_format); if (ret) { char *format_name = drm_get_format_name(fb->pixel_format); DRM_DEBUG_KMS("Invalid pixel format %s\n", format_name); kfree(format_name); goto out; } } ret = drm_crtc_check_viewport(crtc, crtc_req->x, crtc_req->y, mode, fb); if (ret) goto out; } if (crtc_req->count_connectors == 0 && mode) { DRM_DEBUG_KMS("Count connectors is 0 but mode set\n"); ret = -EINVAL; goto out; } if (crtc_req->count_connectors > 0 && (!mode || !fb)) { DRM_DEBUG_KMS("Count connectors is %d but no mode or fb set\n", crtc_req->count_connectors); ret = -EINVAL; goto out; } if (crtc_req->count_connectors > 0) { u32 out_id; /* Avoid unbounded kernel memory allocation */ if (crtc_req->count_connectors > config->num_connector) { ret = -EINVAL; goto out; } connector_set = kmalloc_array(crtc_req->count_connectors, sizeof(struct drm_connector *), GFP_KERNEL); if (!connector_set) { ret = -ENOMEM; goto out; } for (i = 0; i < crtc_req->count_connectors; i++) { connector_set[i] = NULL; set_connectors_ptr = (uint32_t __user *)(unsigned long)crtc_req->set_connectors_ptr; if (get_user(out_id, &set_connectors_ptr[i])) { ret = -EFAULT; goto out; } connector = drm_connector_lookup(dev, out_id); if (!connector) { DRM_DEBUG_KMS("Connector id %d unknown\n", out_id); ret = -ENOENT; goto out; } DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id, connector->name); connector_set[i] = connector; } } set.crtc = crtc; set.x = crtc_req->x; set.y = crtc_req->y; set.mode = mode; set.connectors = connector_set; set.num_connectors = crtc_req->count_connectors; set.fb = fb; ret = drm_mode_set_config_internal(&set); out: if (fb) drm_framebuffer_unreference(fb); if (connector_set) { for (i = 0; i < crtc_req->count_connectors; i++) { if (connector_set[i]) drm_connector_unreference(connector_set[i]); } } kfree(connector_set); drm_mode_destroy(dev, mode); drm_modeset_unlock_all(dev); return ret; } int drm_mode_crtc_set_obj_prop(struct drm_mode_object *obj, struct drm_property *property, uint64_t value) { int ret = -EINVAL; struct drm_crtc *crtc = obj_to_crtc(obj); if (crtc->funcs->set_property) ret = crtc->funcs->set_property(crtc, property, value); if (!ret) drm_object_property_set_value(obj, property, value); return ret; } /** * drm_mode_config_reset - call ->reset callbacks * @dev: drm device * * This functions calls all the crtc's, encoder's and connector's ->reset * callback. Drivers can use this in e.g. their driver load or resume code to * reset hardware and software state. */ void drm_mode_config_reset(struct drm_device *dev) { struct drm_crtc *crtc; struct drm_plane *plane; struct drm_encoder *encoder; struct drm_connector *connector; drm_for_each_plane(plane, dev) if (plane->funcs->reset) plane->funcs->reset(plane); drm_for_each_crtc(crtc, dev) if (crtc->funcs->reset) crtc->funcs->reset(crtc); drm_for_each_encoder(encoder, dev) if (encoder->funcs->reset) encoder->funcs->reset(encoder); mutex_lock(&dev->mode_config.mutex); drm_for_each_connector(connector, dev) if (connector->funcs->reset) connector->funcs->reset(connector); mutex_unlock(&dev->mode_config.mutex); } EXPORT_SYMBOL(drm_mode_config_reset); /** * drm_mode_create_dumb_ioctl - create a dumb backing storage buffer * @dev: DRM device * @data: ioctl data * @file_priv: DRM file info * * This creates a new dumb buffer in the driver's backing storage manager (GEM, * TTM or something else entirely) and returns the resulting buffer handle. This * handle can then be wrapped up into a framebuffer modeset object. * * Note that userspace is not allowed to use such objects for render * acceleration - drivers must create their own private ioctls for such a use * case. * * Called by the user via ioctl. * * Returns: * Zero on success, negative errno on failure. */ int drm_mode_create_dumb_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_mode_create_dumb *args = data; u32 cpp, stride, size; if (!dev->driver->dumb_create) return -ENOSYS; if (!args->width || !args->height || !args->bpp) return -EINVAL; /* overflow checks for 32bit size calculations */ /* NOTE: DIV_ROUND_UP() can overflow */ cpp = DIV_ROUND_UP(args->bpp, 8); if (!cpp || cpp > 0xffffffffU / args->width) return -EINVAL; stride = cpp * args->width; if (args->height > 0xffffffffU / stride) return -EINVAL; /* test for wrap-around */ size = args->height * stride; if (PAGE_ALIGN(size) == 0) return -EINVAL; /* * handle, pitch and size are output parameters. Zero them out to * prevent drivers from accidentally using uninitialized data. Since * not all existing userspace is clearing these fields properly we * cannot reject IOCTL with garbage in them. */ args->handle = 0; args->pitch = 0; args->size = 0; return dev->driver->dumb_create(file_priv, dev, args); } /** * drm_mode_mmap_dumb_ioctl - create an mmap offset for a dumb backing storage buffer * @dev: DRM device * @data: ioctl data * @file_priv: DRM file info * * Allocate an offset in the drm device node's address space to be able to * memory map a dumb buffer. * * Called by the user via ioctl. * * Returns: * Zero on success, negative errno on failure. */ int drm_mode_mmap_dumb_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_mode_map_dumb *args = data; /* call driver ioctl to get mmap offset */ if (!dev->driver->dumb_map_offset) return -ENOSYS; return dev->driver->dumb_map_offset(file_priv, dev, args->handle, &args->offset); } /** * drm_mode_destroy_dumb_ioctl - destroy a dumb backing strage buffer * @dev: DRM device * @data: ioctl data * @file_priv: DRM file info * * This destroys the userspace handle for the given dumb backing storage buffer. * Since buffer objects must be reference counted in the kernel a buffer object * won't be immediately freed if a framebuffer modeset object still uses it. * * Called by the user via ioctl. * * Returns: * Zero on success, negative errno on failure. */ int drm_mode_destroy_dumb_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_mode_destroy_dumb *args = data; if (!dev->driver->dumb_destroy) return -ENOSYS; return dev->driver->dumb_destroy(file_priv, dev, args->handle); } /** * drm_mode_config_init - initialize DRM mode_configuration structure * @dev: DRM device * * Initialize @dev's mode_config structure, used for tracking the graphics * configuration of @dev. * * Since this initializes the modeset locks, no locking is possible. Which is no * problem, since this should happen single threaded at init time. It is the * driver's problem to ensure this guarantee. * */ void drm_mode_config_init(struct drm_device *dev) { mutex_init(&dev->mode_config.mutex); drm_modeset_lock_init(&dev->mode_config.connection_mutex); mutex_init(&dev->mode_config.idr_mutex); mutex_init(&dev->mode_config.fb_lock); mutex_init(&dev->mode_config.blob_lock); INIT_LIST_HEAD(&dev->mode_config.fb_list); INIT_LIST_HEAD(&dev->mode_config.crtc_list); INIT_LIST_HEAD(&dev->mode_config.connector_list); INIT_LIST_HEAD(&dev->mode_config.encoder_list); INIT_LIST_HEAD(&dev->mode_config.property_list); INIT_LIST_HEAD(&dev->mode_config.property_blob_list); INIT_LIST_HEAD(&dev->mode_config.plane_list); idr_init(&dev->mode_config.crtc_idr); idr_init(&dev->mode_config.tile_idr); ida_init(&dev->mode_config.connector_ida); drm_modeset_lock_all(dev); drm_mode_create_standard_properties(dev); drm_modeset_unlock_all(dev); /* Just to be sure */ dev->mode_config.num_fb = 0; dev->mode_config.num_connector = 0; dev->mode_config.num_crtc = 0; dev->mode_config.num_encoder = 0; dev->mode_config.num_overlay_plane = 0; dev->mode_config.num_total_plane = 0; } EXPORT_SYMBOL(drm_mode_config_init); /** * drm_mode_config_cleanup - free up DRM mode_config info * @dev: DRM device * * Free up all the connectors and CRTCs associated with this DRM device, then * free up the framebuffers and associated buffer objects. * * Note that since this /should/ happen single-threaded at driver/device * teardown time, no locking is required. It's the driver's job to ensure that * this guarantee actually holds true. * * FIXME: cleanup any dangling user buffer objects too */ void drm_mode_config_cleanup(struct drm_device *dev) { struct drm_connector *connector, *ot; struct drm_crtc *crtc, *ct; struct drm_encoder *encoder, *enct; struct drm_framebuffer *fb, *fbt; struct drm_property *property, *pt; struct drm_property_blob *blob, *bt; struct drm_plane *plane, *plt; list_for_each_entry_safe(encoder, enct, &dev->mode_config.encoder_list, head) { encoder->funcs->destroy(encoder); } list_for_each_entry_safe(connector, ot, &dev->mode_config.connector_list, head) { connector->funcs->destroy(connector); } list_for_each_entry_safe(property, pt, &dev->mode_config.property_list, head) { drm_property_destroy(dev, property); } list_for_each_entry_safe(plane, plt, &dev->mode_config.plane_list, head) { plane->funcs->destroy(plane); } list_for_each_entry_safe(crtc, ct, &dev->mode_config.crtc_list, head) { crtc->funcs->destroy(crtc); } list_for_each_entry_safe(blob, bt, &dev->mode_config.property_blob_list, head_global) { drm_property_unreference_blob(blob); } /* * Single-threaded teardown context, so it's not required to grab the * fb_lock to protect against concurrent fb_list access. Contrary, it * would actually deadlock with the drm_framebuffer_cleanup function. * * Also, if there are any framebuffers left, that's a driver leak now, * so politely WARN about this. */ WARN_ON(!list_empty(&dev->mode_config.fb_list)); list_for_each_entry_safe(fb, fbt, &dev->mode_config.fb_list, head) { drm_framebuffer_free(&fb->base.refcount); } ida_destroy(&dev->mode_config.connector_ida); idr_destroy(&dev->mode_config.tile_idr); idr_destroy(&dev->mode_config.crtc_idr); drm_modeset_lock_fini(&dev->mode_config.connection_mutex); } EXPORT_SYMBOL(drm_mode_config_cleanup); /** * DOC: Tile group * * Tile groups are used to represent tiled monitors with a unique * integer identifier. Tiled monitors using DisplayID v1.3 have * a unique 8-byte handle, we store this in a tile group, so we * have a common identifier for all tiles in a monitor group. */ static void drm_tile_group_free(struct kref *kref) { struct drm_tile_group *tg = container_of(kref, struct drm_tile_group, refcount); struct drm_device *dev = tg->dev; mutex_lock(&dev->mode_config.idr_mutex); idr_remove(&dev->mode_config.tile_idr, tg->id); mutex_unlock(&dev->mode_config.idr_mutex); kfree(tg); } /** * drm_mode_put_tile_group - drop a reference to a tile group. * @dev: DRM device * @tg: tile group to drop reference to. * * drop reference to tile group and free if 0. */ void drm_mode_put_tile_group(struct drm_device *dev, struct drm_tile_group *tg) { kref_put(&tg->refcount, drm_tile_group_free); } /** * drm_mode_get_tile_group - get a reference to an existing tile group * @dev: DRM device * @topology: 8-bytes unique per monitor. * * Use the unique bytes to get a reference to an existing tile group. * * RETURNS: * tile group or NULL if not found. */ struct drm_tile_group *drm_mode_get_tile_group(struct drm_device *dev, char topology[8]) { struct drm_tile_group *tg; int id; mutex_lock(&dev->mode_config.idr_mutex); idr_for_each_entry(&dev->mode_config.tile_idr, tg, id) { if (!memcmp(tg->group_data, topology, 8)) { if (!kref_get_unless_zero(&tg->refcount)) tg = NULL; mutex_unlock(&dev->mode_config.idr_mutex); return tg; } } mutex_unlock(&dev->mode_config.idr_mutex); return NULL; } EXPORT_SYMBOL(drm_mode_get_tile_group); /** * drm_mode_create_tile_group - create a tile group from a displayid description * @dev: DRM device * @topology: 8-bytes unique per monitor. * * Create a tile group for the unique monitor, and get a unique * identifier for the tile group. * * RETURNS: * new tile group or error. */ struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev, char topology[8]) { struct drm_tile_group *tg; int ret; tg = kzalloc(sizeof(*tg), GFP_KERNEL); if (!tg) return ERR_PTR(-ENOMEM); kref_init(&tg->refcount); memcpy(tg->group_data, topology, 8); tg->dev = dev; mutex_lock(&dev->mode_config.idr_mutex); ret = idr_alloc(&dev->mode_config.tile_idr, tg, 1, 0, GFP_KERNEL); if (ret >= 0) { tg->id = ret; } else { kfree(tg); tg = ERR_PTR(ret); } mutex_unlock(&dev->mode_config.idr_mutex); return tg; } EXPORT_SYMBOL(drm_mode_create_tile_group);