/* * Copyright 2014 Linaro Ltd * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ /dts-v1/; #include #include / { #address-cells = <1>; #size-cells = <1>; model = "ARM RealView PB1176"; compatible = "arm,realview-pb1176"; chosen { }; aliases { serial0 = &pb1176_serial0; serial1 = &pb1176_serial1; serial2 = &pb1176_serial2; serial3 = &pb1176_serial3; serial4 = &fpga_serial; }; memory { device_type = "memory"; /* 128 MiB memory @ 0x0 */ reg = <0x00000000 0x08000000>; }; /* The voltage to the MMC card is hardwired at 3.3V */ vmmc: regulator-vmmc { compatible = "regulator-fixed"; regulator-name = "vmmc"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-boot-on; }; veth: regulator-veth { compatible = "regulator-fixed"; regulator-name = "veth"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-boot-on; }; xtal24mhz: xtal24mhz@24M { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; }; timclk: timclk@1M { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <24>; clock-mult = <1>; clocks = <&xtal24mhz>; }; mclk: mclk@24M { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <1>; clock-mult = <1>; clocks = <&xtal24mhz>; }; kmiclk: kmiclk@24M { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <1>; clock-mult = <1>; clocks = <&xtal24mhz>; }; sspclk: sspclk@24M { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <1>; clock-mult = <1>; clocks = <&xtal24mhz>; }; uartclk: uartclk@24M { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <1>; clock-mult = <1>; clocks = <&xtal24mhz>; }; /* FIXME: this actually hangs off the PLL clocks */ pclk: pclk@0 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <0>; }; flash@30000000 { compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x30000000 0x4000000>; bank-width = <4>; partitions { compatible = "arm,arm-firmware-suite"; }; }; fpga_flash@38000000 { compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x38000000 0x800000>; bank-width = <4>; partitions { compatible = "arm,arm-firmware-suite"; }; }; /* * The "secure flash" contains things like the boot * monitor so we don't want people to accidentally * screw this up. Mark the device tree node disabled * by default. */ secflash@3c000000 { compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x3c000000 0x4000000>; bank-width = <4>; status = "disabled"; }; /* SMSC 9118 ethernet with PHY and EEPROM */ ethernet@3a000000 { compatible = "smsc,lan9118", "smsc,lan9115"; reg = <0x3a000000 0x10000>; interrupt-parent = <&intc_fpga1176>; interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; phy-mode = "mii"; reg-io-width = <4>; smsc,irq-active-high; smsc,irq-push-pull; vdd33a-supply = <&veth>; vddvario-supply = <&veth>; }; usb@3b000000 { compatible = "nxp,usb-isp1761"; reg = <0x3b000000 0x20000>; interrupt-parent = <&intc_fpga1176>; interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "peripheral"; }; bridge { compatible = "ti,ths8134a", "ti,ths8134"; #address-cells = <1>; #size-cells = <0>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; vga_bridge_in: endpoint { remote-endpoint = <&clcd_pads>; }; }; port@1 { reg = <1>; vga_bridge_out: endpoint { remote-endpoint = <&vga_con_in>; }; }; }; }; vga { compatible = "vga-connector"; port { vga_con_in: endpoint { remote-endpoint = <&vga_bridge_out>; }; }; }; soc { #address-cells = <1>; #size-cells = <1>; compatible = "arm,realview-pb1176-soc", "simple-bus"; regmap = <&syscon>; ranges; syscon: syscon@10000000 { compatible = "arm,realview-pb1176-syscon", "syscon", "simple-mfd"; reg = <0x10000000 0x1000>; led@08.0 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x01>; label = "versatile:0"; linux,default-trigger = "heartbeat"; default-state = "on"; }; led@08.1 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x02>; label = "versatile:1"; linux,default-trigger = "mmc0"; default-state = "off"; }; led@08.2 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x04>; label = "versatile:2"; linux,default-trigger = "cpu0"; default-state = "off"; }; led@08.3 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x08>; label = "versatile:3"; default-state = "off"; }; led@08.4 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x10>; label = "versatile:4"; default-state = "off"; }; led@08.5 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x20>; label = "versatile:5"; default-state = "off"; }; led@08.6 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x40>; label = "versatile:6"; default-state = "off"; }; led@08.7 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x80>; label = "versatile:7"; default-state = "off"; }; oscclk0: osc0@0c { compatible = "arm,syscon-icst307"; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x0C>; clocks = <&xtal24mhz>; }; oscclk1: osc1@10 { compatible = "arm,syscon-icst307"; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x10>; clocks = <&xtal24mhz>; }; oscclk2: osc2@14 { compatible = "arm,syscon-icst307"; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x14>; clocks = <&xtal24mhz>; }; oscclk3: osc3@18 { compatible = "arm,syscon-icst307"; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x18>; clocks = <&xtal24mhz>; }; oscclk4: osc4@1c { compatible = "arm,syscon-icst307"; #clock-cells = <0>; lock-offset = <0x20>; vco-offset = <0x1c>; clocks = <&xtal24mhz>; }; }; /* Primary DevChip GIC synthesized with the CPU */ intc_dc1176: interrupt-controller@10120000 { compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic"; #interrupt-cells = <3>; #address-cells = <1>; interrupt-controller; reg = <0x10121000 0x1000>, <0x10120000 0x100>; }; L2: cache-controller { compatible = "arm,l220-cache"; reg = <0x10110000 0x1000>; interrupt-parent = <&intc_dc1176>; interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>; cache-unified; cache-level = <2>; /* * Override default cache size, sets and * associativity as these may be erroneously set * up by boot loader(s). */ arm,override-auxreg; cache-size = <131072>; // 128kB cache-sets = <512>; cache-line-size = <32>; }; pmu { compatible = "arm,arm1176-pmu"; interrupt-parent = <&intc_dc1176>; interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; }; timer01: timer@10104000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x10104000 0x1000>; interrupt-parent = <&intc_dc1176>; interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>, <0 9 IRQ_TYPE_LEVEL_HIGH>; clocks = <&timclk>, <&timclk>, <&pclk>; clock-names = "timer1", "timer2", "apb_pclk"; }; timer23: timer@10105000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x10105000 0x1000>; interrupt-parent = <&intc_dc1176>; interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; arm,sp804-has-irq = <1>; clocks = <&timclk>, <&timclk>, <&pclk>; clock-names = "timer1", "timer2", "apb_pclk"; }; pb1176_rtc: rtc@10108000 { compatible = "arm,pl031", "arm,primecell"; reg = <0x10108000 0x1000>; interrupt-parent = <&intc_dc1176>; interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; clocks = <&pclk>; clock-names = "apb_pclk"; }; pb1176_gpio0: gpio@1010a000 { compatible = "arm,pl061", "arm,primecell"; reg = <0x1010a000 0x1000>; gpio-controller; interrupt-parent = <&intc_dc1176>; interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; clocks = <&pclk>; clock-names = "apb_pclk"; }; pb1176_ssp: spi@1010b000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x1010b000 0x1000>; interrupt-parent = <&intc_dc1176>; interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&sspclk>, <&pclk>; clock-names = "SSPCLK", "apb_pclk"; }; pb1176_serial0: serial@1010c000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x1010c000 0x1000>; interrupt-parent = <&intc_dc1176>; interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>; clocks = <&uartclk>, <&pclk>; clock-names = "uartclk", "apb_pclk"; }; pb1176_serial1: serial@1010d000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x1010d000 0x1000>; interrupt-parent = <&intc_dc1176>; interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&uartclk>, <&pclk>; clock-names = "uartclk", "apb_pclk"; }; pb1176_serial2: serial@1010e000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x1010e000 0x1000>; interrupt-parent = <&intc_dc1176>; interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&uartclk>, <&pclk>; clock-names = "uartclk", "apb_pclk"; }; pb1176_serial3: serial@1010f000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x1010f000 0x1000>; interrupt-parent = <&intc_dc1176>; interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; clocks = <&uartclk>, <&pclk>; clock-names = "uartclk", "apb_pclk"; }; /* Direct-mapped development chip ROM */ pb1176_rom@10200000 { compatible = "mtd-rom"; reg = <0x10200000 0x4000>; bank-width = <1>; }; clcd@10112000 { compatible = "arm,pl111", "arm,primecell"; reg = <0x10112000 0x1000>; interrupt-parent = <&intc_dc1176>; interrupt-names = "combined"; interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>; clocks = <&oscclk0>, <&pclk>; clock-names = "clcdclk", "apb_pclk"; /* 1024x768 16bpp @65MHz works fine */ max-memory-bandwidth = <95000000>; port { clcd_pads: endpoint { remote-endpoint = <&vga_bridge_in>; arm,pl11x,tft-r0g0b0-pads = <0 8 16>; }; }; }; }; /* These peripherals are inside the FPGA rather than the DevChip */ fpga { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; ranges; i2c0: i2c@10002000 { #address-cells = <1>; #size-cells = <0>; compatible = "arm,versatile-i2c"; reg = <0x10002000 0x1000>; rtc@68 { compatible = "dallas,ds1338"; reg = <0x68>; }; }; fpga_aaci: aaci@10004000 { compatible = "arm,pl041", "arm,primecell"; reg = <0x10004000 0x1000>; interrupt-parent = <&intc_fpga1176>; interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&pclk>; clock-names = "apb_pclk"; }; fpga_mci: mmcsd@10005000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x10005000 0x1000>; interrupt-parent = <&intc_fpga1176>; interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>, <0 2 IRQ_TYPE_LEVEL_HIGH>; /* Due to frequent FIFO overruns, use just 500 kHz */ max-frequency = <500000>; bus-width = <4>; cap-sd-highspeed; cap-mmc-highspeed; clocks = <&mclk>, <&pclk>; clock-names = "mclk", "apb_pclk"; vmmc-supply = <&vmmc>; cd-gpios = <&fpga_gpio1 0 GPIO_ACTIVE_LOW>; wp-gpios = <&fpga_gpio1 1 GPIO_ACTIVE_HIGH>; }; fpga_kmi0: kmi@10006000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x10006000 0x1000>; interrupt-parent = <&intc_fpga1176>; interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; clocks = <&kmiclk>, <&pclk>; clock-names = "KMIREFCLK", "apb_pclk"; }; fpga_kmi1: kmi@10007000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x10007000 0x1000>; interrupt-parent = <&intc_fpga1176>; interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; clocks = <&kmiclk>, <&pclk>; clock-names = "KMIREFCLK", "apb_pclk"; }; fpga_charlcd: charlcd@10008000 { compatible = "arm,versatile-lcd"; reg = <0x10008000 0x1000>; interrupt-parent = <&intc_fpga1176>; interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; clocks = <&pclk>; clock-names = "apb_pclk"; }; fpga_serial: serial@10009000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x10009000 0x1000>; interrupt-parent = <&intc_fpga1176>; interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; clocks = <&uartclk>, <&pclk>; clock-names = "uartclk", "apb_pclk"; }; /* This GIC on the board is cascaded off the DevChip GIC */ intc_fpga1176: interrupt-controller@10040000 { compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic"; #interrupt-cells = <3>; #address-cells = <1>; interrupt-controller; reg = <0x10041000 0x1000>, <0x10040000 0x100>; interrupt-parent = <&intc_dc1176>; interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; }; fpga_gpio0: gpio@10014000 { compatible = "arm,pl061", "arm,primecell"; reg = <0x10014000 0x1000>; gpio-controller; interrupt-parent = <&intc_fpga1176>; interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; clocks = <&pclk>; clock-names = "apb_pclk"; }; fpga_gpio1: gpio@10015000 { compatible = "arm,pl061", "arm,primecell"; reg = <0x10015000 0x1000>; gpio-controller; interrupt-parent = <&intc_fpga1176>; interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; clocks = <&pclk>; clock-names = "apb_pclk"; }; fpga_rtc: rtc@10017000 { compatible = "arm,pl031", "arm,primecell"; reg = <0x10017000 0x1000>; interrupt-parent = <&intc_fpga1176>; interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&pclk>; clock-names = "apb_pclk"; }; }; };