// SPDX-License-Identifier: GPL-2.0 /* * Samsung's Exynos3250 based Rinato board device tree source * * Copyright (c) 2014 Samsung Electronics Co., Ltd. * http://www.samsung.com * * Device tree source file for Samsung's Rinato board which is based on * Samsung Exynos3250 SoC. */ /dts-v1/; #include "exynos3250.dtsi" #include "exynos4412-ppmu-common.dtsi" #include #include #include / { model = "Samsung Rinato board"; compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3"; aliases { i2c7 = &i2c_max77836; }; chosen { stdout-path = &serial_1; }; memory@40000000 { device_type = "memory"; reg = <0x40000000 0x1ff00000>; }; firmware@205f000 { compatible = "samsung,secure-firmware"; reg = <0x0205F000 0x1000>; }; gpio-keys { compatible = "gpio-keys"; power-key { gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = ; label = "power key"; debounce-interval = <10>; wakeup-source; }; }; wlan_pwrseq: mshc1-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>; }; i2c_max77836: i2c-gpio-0 { compatible = "i2c-gpio"; sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; #address-cells = <1>; #size-cells = <0>; max77836: pmic@25 { compatible = "maxim,max77836"; interrupt-parent = <&gpx1>; interrupts = <5 IRQ_TYPE_NONE>; reg = <0x25>; wakeup-source; muic: max77836-muic { compatible = "maxim,max77836-muic"; }; regulators { compatible = "maxim,max77836-regulator"; safeout_reg: SAFEOUT { regulator-name = "SAFEOUT"; }; charger_reg: CHARGER { regulator-name = "CHARGER"; regulator-min-microamp = <45000>; regulator-max-microamp = <475000>; regulator-boot-on; }; motor_reg: LDO1 { regulator-name = "MOT_2.7V"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <2700000>; }; LDO2 { regulator-name = "UNUSED_LDO2"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <3950000>; }; }; charger { compatible = "maxim,max77836-charger"; maxim,constant-uvolt = <4350000>; maxim,fast-charge-uamp = <225000>; maxim,eoc-uamp = <7500>; maxim,ovp-uvolt = <6500000>; }; }; }; haptics { compatible = "regulator-haptic"; haptic-supply = <&motor_reg>; min-microvolt = <1100000>; max-microvolt = <2700000>; }; thermal-zones { cpu_thermal: cpu-thermal { cooling-maps { map0 { /* Corresponds to 500MHz */ cooling-device = <&cpu0 5 5>, <&cpu1 5 5>; }; map1 { /* Corresponds to 200MHz */ cooling-device = <&cpu0 8 8>, <&cpu1 8 8>; }; }; }; }; }; &adc { vdd-supply = <&ldo3_reg>; status = "okay"; assigned-clocks = <&cmu CLK_SCLK_TSADC>; assigned-clock-rates = <6000000>; thermistor-ap { compatible = "murata,ncp15wb473"; pullup-uv = <1800000>; pullup-ohm = <100000>; pulldown-ohm = <100000>; io-channels = <&adc 0>; }; thermistor-battery { compatible = "murata,ncp15wb473"; pullup-uv = <1800000>; pullup-ohm = <100000>; pulldown-ohm = <100000>; io-channels = <&adc 1>; }; }; &bus_dmc { devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; vdd-supply = <&buck1_reg>; status = "okay"; }; &bus_leftbus { devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; vdd-supply = <&buck3_reg>; status = "okay"; }; &bus_rightbus { devfreq = <&bus_leftbus>; status = "okay"; }; &bus_lcd0 { devfreq = <&bus_leftbus>; status = "okay"; }; &bus_fsys { devfreq = <&bus_leftbus>; status = "okay"; }; &bus_mcuisp { devfreq = <&bus_leftbus>; status = "okay"; }; &bus_isp { devfreq = <&bus_leftbus>; status = "okay"; }; &bus_peril { devfreq = <&bus_leftbus>; status = "okay"; }; &bus_mfc { devfreq = <&bus_leftbus>; status = "okay"; }; &cmu { clocks = <&xusbxti>; }; &cpu0 { cpu0-supply = <&buck2_reg>; }; &exynos_usbphy { status = "okay"; vbus-supply = <&safeout_reg>; }; &hsotg { vusb_d-supply = <&ldo15_reg>; vusb_a-supply = <&ldo12_reg>; dr_mode = "peripheral"; status = "okay"; }; &dsi_0 { vddcore-supply = <&ldo6_reg>; vddio-supply = <&ldo6_reg>; samsung,burst-clock-frequency = <250000000>; samsung,esc-clock-frequency = <20000000>; samsung,pll-clock-frequency = <24000000>; status = "okay"; panel@0 { compatible = "samsung,s6e63j0x03"; reg = <0>; vdd3-supply = <&ldo16_reg>; vci-supply = <&ldo20_reg>; reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>; te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>; }; }; &fimd { status = "okay"; i80-if-timings { cs-setup = <0>; wr-setup = <0>; wr-active = <1>; wr-hold = <0>; }; }; &gpu { mali-supply = <&buck3_reg>; status = "okay"; }; &i2c_0 { #address-cells = <1>; #size-cells = <0>; samsung,i2c-sda-delay = <100>; samsung,i2c-slave-addr = <0x10>; samsung,i2c-max-bus-freq = <100000>; status = "okay"; pmic@66 { compatible = "samsung,s2mps14-pmic"; interrupt-parent = <&gpx0>; interrupts = <7 IRQ_TYPE_LEVEL_LOW>; reg = <0x66>; wakeup-source; s2mps14_osc: clocks { compatible = "samsung,s2mps14-clk"; #clock-cells = <1>; clock-output-names = "s2mps14_ap", "unused", "s2mps14_bt"; }; regulators { ldo1_reg: LDO1 { regulator-name = "VAP_ALIVE_1.0V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; regulator-state-mem { regulator-on-in-suspend; }; }; ldo2_reg: LDO2 { regulator-name = "VAP_M1_1.2V"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; regulator-state-mem { regulator-off-in-suspend; }; }; ldo3_reg: LDO3 { regulator-name = "VCC_AP_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-state-mem { regulator-off-in-suspend; }; }; ldo4_reg: LDO4 { regulator-name = "VAP_AVDD_PLL1"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-state-mem { regulator-off-in-suspend; }; }; ldo5_reg: LDO5 { regulator-name = "VAP_PLL_ISO_1.0V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; regulator-state-mem { regulator-off-in-suspend; }; }; ldo6_reg: LDO6 { regulator-name = "VAP_VMIPI_1.0V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; regulator-state-mem { regulator-off-in-suspend; }; }; ldo7_reg: LDO7 { regulator-name = "VAP_AVDD_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-state-mem { regulator-off-in-suspend; }; }; ldo8_reg: LDO8 { regulator-name = "VAP_USB_3.0V"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-always-on; regulator-state-mem { regulator-off-in-suspend; }; }; ldo9_reg: LDO9 { regulator-name = "V_LPDDR_1.2V"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; regulator-state-mem { regulator-on-in-suspend; }; }; ldo10_reg: LDO10 { regulator-name = "UNUSED_LDO10"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-state-mem { regulator-off-in-suspend; }; }; ldo11_reg: LDO11 { regulator-name = "V_EMMC_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; }; ldo12_reg: LDO12 { regulator-name = "V_EMMC_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; }; ldo13_reg: LDO13 { regulator-name = "CAM_AVDD_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-state-mem { regulator-off-in-suspend; }; }; ldo14_reg: LDO14 { regulator-name = "UNUSED_LDO14"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <2700000>; regulator-state-mem { regulator-off-in-suspend; }; }; ldo15_reg: LDO15 { regulator-name = "TSP_AVDD_3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-state-mem { regulator-off-in-suspend; }; }; ldo16_reg: LDO16 { regulator-name = "LCD_VDD_3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-state-mem { regulator-off-in-suspend; }; }; ldo17_reg: LDO17 { regulator-name = "V_IRLED_3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-state-mem { regulator-off-in-suspend; }; }; ldo18_reg: LDO18 { regulator-name = "CAM_AF_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-state-mem { regulator-off-in-suspend; }; }; ldo19_reg: LDO19 { regulator-name = "TSP_VDD_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-off-in-suspend; }; }; ldo20_reg: LDO20 { regulator-name = "LCD_VDD_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-off-in-suspend; }; }; ldo21_reg: LDO21 { regulator-name = "CAM_IO_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-off-in-suspend; }; }; ldo22_reg: LDO22 { regulator-name = "CAM_DVDD_1.2V"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-state-mem { regulator-off-in-suspend; }; }; ldo23_reg: LDO23 { regulator-name = "HRM_VCC_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; ldo24_reg: LDO24 { regulator-name = "HRM_VCC_3.3V"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-state-mem { regulator-off-in-suspend; }; }; ldo25_reg: LDO25 { regulator-name = "UNUSED_LDO25"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-state-mem { regulator-off-in-suspend; }; }; buck1_reg: BUCK1 { regulator-name = "VAP_MIF_1.0V"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <900000>; regulator-always-on; regulator-state-mem { regulator-off-in-suspend; }; }; buck2_reg: BUCK2 { regulator-name = "VAP_ARM_1.0V"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1150000>; regulator-always-on; regulator-state-mem { regulator-off-in-suspend; }; }; buck3_reg: BUCK3 { regulator-name = "VAP_INT3D_1.0V"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1000000>; regulator-always-on; regulator-state-mem { regulator-off-in-suspend; }; }; buck4_reg: BUCK4 { regulator-name = "VCC_SUB_1.95V"; regulator-min-microvolt = <1950000>; regulator-max-microvolt = <1950000>; regulator-always-on; regulator-state-mem { regulator-on-in-suspend; }; }; buck5_reg: BUCK5 { regulator-name = "VCC_SUB_1.35V"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; regulator-always-on; regulator-state-mem { regulator-on-in-suspend; }; }; }; }; }; &i2c_1 { #address-cells = <1>; #size-cells = <0>; samsung,i2c-sda-delay = <100>; samsung,i2c-slave-addr = <0x10>; samsung,i2c-max-bus-freq = <400000>; status = "okay"; fuelgauge@36 { compatible = "maxim,max77836-battery"; interrupt-parent = <&gpx1>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; reg = <0x36>; }; }; &i2s2 { status = "okay"; }; &jpeg { status = "okay"; }; &mshc_0 { broken-cd; non-removable; cap-mmc-highspeed; desc-num = <4>; mmc-hs200-1_8v; card-detect-delay = <200>; vmmc-supply = <&ldo12_reg>; clock-frequency = <100000000>; max-frequency = <100000000>; samsung,dw-mshc-ciu-div = <1>; samsung,dw-mshc-sdr-timing = <0 1>; samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; bus-width = <8>; status = "okay"; }; &mshc_1 { status = "okay"; #address-cells = <1>; #size-cells = <0>; non-removable; cap-sd-highspeed; cap-sdio-irq; keep-power-in-suspend; samsung,dw-mshc-ciu-div = <1>; samsung,dw-mshc-sdr-timing = <0 1>; samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-names = "default"; pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>; bus-width = <4>; mmc-pwrseq = <&wlan_pwrseq>; brcmf: wifi@1 { compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac"; reg = <1>; interrupt-parent = <&gpx1>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "host-wake"; }; }; &serial_0 { assigned-clocks = <&cmu CLK_SCLK_UART0>; assigned-clock-rates = <100000000>; status = "okay"; bluetooth { compatible = "brcm,bcm4330-bt"; max-speed = <3000000>; shutdown-gpios = <&gpe0 0 GPIO_ACTIVE_HIGH>; device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>; host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; clocks = <&s2mps14_osc S2MPS11_CLK_BT>; }; }; &serial_1 { status = "okay"; }; &tmu { vtmu-supply = <&ldo7_reg>; status = "okay"; }; &rtc { clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>; clock-names = "rtc", "rtc_src"; status = "okay"; }; &xusbxti { clock-frequency = <24000000>; }; &pinctrl_0 { pinctrl-names = "default"; pinctrl-0 = <&initial0 &sleep0>; initial0: initial-state { PIN_IN(gpa1-4, DOWN, LV1); PIN_IN(gpa1-5, DOWN, LV1); PIN_IN(gpc0-0, DOWN, LV1); PIN_IN(gpc0-1, DOWN, LV1); PIN_IN(gpc0-2, DOWN, LV1); PIN_IN(gpc0-3, DOWN, LV1); PIN_IN(gpc0-4, DOWN, LV1); PIN_IN(gpd0-0, DOWN, LV1); PIN_IN(gpd0-1, DOWN, LV1); }; sleep0: sleep-state { PIN_SLP(gpa0-0, INPUT, DOWN); PIN_SLP(gpa0-1, INPUT, DOWN); PIN_SLP(gpa0-2, INPUT, DOWN); PIN_SLP(gpa0-3, INPUT, DOWN); PIN_SLP(gpa0-4, INPUT, DOWN); PIN_SLP(gpa0-5, INPUT, DOWN); PIN_SLP(gpa0-6, INPUT, DOWN); PIN_SLP(gpa0-7, INPUT, DOWN); PIN_SLP(gpa1-0, INPUT, DOWN); PIN_SLP(gpa1-1, INPUT, DOWN); PIN_SLP(gpa1-2, INPUT, DOWN); PIN_SLP(gpa1-3, INPUT, DOWN); PIN_SLP(gpa1-4, INPUT, DOWN); PIN_SLP(gpa1-5, INPUT, DOWN); PIN_SLP(gpb-0, PREV, NONE); PIN_SLP(gpb-1, PREV, NONE); PIN_SLP(gpb-2, PREV, NONE); PIN_SLP(gpb-3, PREV, NONE); PIN_SLP(gpb-4, INPUT, DOWN); PIN_SLP(gpb-5, INPUT, DOWN); PIN_SLP(gpb-6, INPUT, DOWN); PIN_SLP(gpb-7, INPUT, DOWN); PIN_SLP(gpc0-0, INPUT, DOWN); PIN_SLP(gpc0-1, INPUT, DOWN); PIN_SLP(gpc0-2, INPUT, DOWN); PIN_SLP(gpc0-3, INPUT, DOWN); PIN_SLP(gpc0-4, INPUT, DOWN); PIN_SLP(gpc1-0, INPUT, DOWN); PIN_SLP(gpc1-1, INPUT, DOWN); PIN_SLP(gpc1-2, INPUT, DOWN); PIN_SLP(gpc1-3, INPUT, DOWN); PIN_SLP(gpc1-4, INPUT, DOWN); PIN_SLP(gpd0-0, INPUT, DOWN); PIN_SLP(gpd0-1, INPUT, DOWN); PIN_SLP(gpd0-2, INPUT, NONE); PIN_SLP(gpd0-3, INPUT, NONE); PIN_SLP(gpd1-0, INPUT, NONE); PIN_SLP(gpd1-1, INPUT, NONE); PIN_SLP(gpd1-2, INPUT, NONE); PIN_SLP(gpd1-3, INPUT, NONE); }; }; &pinctrl_1 { pinctrl-names = "default"; pinctrl-0 = <&initial1 &sleep1>; initial1: initial-state { PIN_IN(gpe0-6, DOWN, LV1); PIN_IN(gpe0-7, DOWN, LV1); PIN_IN(gpe1-0, DOWN, LV1); PIN_IN(gpe1-3, DOWN, LV1); PIN_IN(gpe1-4, DOWN, LV1); PIN_IN(gpe1-5, DOWN, LV1); PIN_IN(gpe1-6, DOWN, LV1); PIN_IN(gpk2-0, DOWN, LV1); PIN_IN(gpk2-1, DOWN, LV1); PIN_IN(gpk2-2, DOWN, LV1); PIN_IN(gpk2-3, DOWN, LV1); PIN_IN(gpk2-4, DOWN, LV1); PIN_IN(gpk2-5, DOWN, LV1); PIN_IN(gpk2-6, DOWN, LV1); PIN_IN(gpm0-0, DOWN, LV1); PIN_IN(gpm0-1, DOWN, LV1); PIN_IN(gpm0-2, DOWN, LV1); PIN_IN(gpm0-3, DOWN, LV1); PIN_IN(gpm0-4, DOWN, LV1); PIN_IN(gpm0-5, DOWN, LV1); PIN_IN(gpm0-6, DOWN, LV1); PIN_IN(gpm0-7, DOWN, LV1); PIN_IN(gpm1-0, DOWN, LV1); PIN_IN(gpm1-1, DOWN, LV1); PIN_IN(gpm1-2, DOWN, LV1); PIN_IN(gpm1-3, DOWN, LV1); PIN_IN(gpm1-4, DOWN, LV1); PIN_IN(gpm1-5, DOWN, LV1); PIN_IN(gpm1-6, DOWN, LV1); PIN_IN(gpm2-0, DOWN, LV1); PIN_IN(gpm2-1, DOWN, LV1); PIN_IN(gpm3-0, DOWN, LV1); PIN_IN(gpm3-1, DOWN, LV1); PIN_IN(gpm3-2, DOWN, LV1); PIN_IN(gpm3-3, DOWN, LV1); PIN_IN(gpm3-4, DOWN, LV1); PIN_IN(gpm4-1, DOWN, LV1); PIN_IN(gpm4-2, DOWN, LV1); PIN_IN(gpm4-3, DOWN, LV1); PIN_IN(gpm4-4, DOWN, LV1); PIN_IN(gpm4-5, DOWN, LV1); PIN_IN(gpm4-6, DOWN, LV1); PIN_IN(gpm4-7, DOWN, LV1); }; sleep1: sleep-state { PIN_SLP(gpe0-0, PREV, NONE); PIN_SLP(gpe0-1, PREV, NONE); PIN_SLP(gpe0-2, INPUT, DOWN); PIN_SLP(gpe0-3, INPUT, UP); PIN_SLP(gpe0-4, INPUT, DOWN); PIN_SLP(gpe0-5, INPUT, DOWN); PIN_SLP(gpe0-6, INPUT, DOWN); PIN_SLP(gpe0-7, INPUT, DOWN); PIN_SLP(gpe1-0, INPUT, DOWN); PIN_SLP(gpe1-1, PREV, NONE); PIN_SLP(gpe1-2, INPUT, DOWN); PIN_SLP(gpe1-3, INPUT, DOWN); PIN_SLP(gpe1-4, INPUT, DOWN); PIN_SLP(gpe1-5, INPUT, DOWN); PIN_SLP(gpe1-6, INPUT, DOWN); PIN_SLP(gpe1-7, INPUT, NONE); PIN_SLP(gpe2-0, INPUT, NONE); PIN_SLP(gpe2-1, INPUT, NONE); PIN_SLP(gpe2-2, INPUT, NONE); PIN_SLP(gpk0-0, INPUT, DOWN); PIN_SLP(gpk0-1, INPUT, DOWN); PIN_SLP(gpk0-2, OUT0, NONE); PIN_SLP(gpk0-3, INPUT, DOWN); PIN_SLP(gpk0-4, INPUT, DOWN); PIN_SLP(gpk0-5, INPUT, DOWN); PIN_SLP(gpk0-6, INPUT, DOWN); PIN_SLP(gpk0-7, INPUT, DOWN); PIN_SLP(gpk1-0, INPUT, DOWN); PIN_SLP(gpk1-1, INPUT, DOWN); PIN_SLP(gpk1-2, INPUT, DOWN); PIN_SLP(gpk1-3, INPUT, DOWN); PIN_SLP(gpk1-4, INPUT, DOWN); PIN_SLP(gpk1-5, INPUT, DOWN); PIN_SLP(gpk1-6, INPUT, DOWN); PIN_SLP(gpk2-0, INPUT, DOWN); PIN_SLP(gpk2-1, INPUT, DOWN); PIN_SLP(gpk2-2, INPUT, DOWN); PIN_SLP(gpk2-3, INPUT, DOWN); PIN_SLP(gpk2-4, INPUT, DOWN); PIN_SLP(gpk2-5, INPUT, DOWN); PIN_SLP(gpk2-6, INPUT, DOWN); PIN_SLP(gpl0-0, INPUT, DOWN); PIN_SLP(gpl0-1, INPUT, DOWN); PIN_SLP(gpl0-2, INPUT, DOWN); PIN_SLP(gpl0-3, INPUT, DOWN); PIN_SLP(gpm0-0, INPUT, DOWN); PIN_SLP(gpm0-1, INPUT, DOWN); PIN_SLP(gpm0-2, INPUT, DOWN); PIN_SLP(gpm0-3, INPUT, DOWN); PIN_SLP(gpm0-4, INPUT, DOWN); PIN_SLP(gpm0-5, INPUT, DOWN); PIN_SLP(gpm0-6, INPUT, DOWN); PIN_SLP(gpm0-7, INPUT, DOWN); PIN_SLP(gpm1-0, INPUT, DOWN); PIN_SLP(gpm1-1, INPUT, DOWN); PIN_SLP(gpm1-2, INPUT, DOWN); PIN_SLP(gpm1-3, INPUT, DOWN); PIN_SLP(gpm1-4, INPUT, DOWN); PIN_SLP(gpm1-5, INPUT, DOWN); PIN_SLP(gpm1-6, INPUT, DOWN); PIN_SLP(gpm2-0, INPUT, DOWN); PIN_SLP(gpm2-1, INPUT, DOWN); PIN_SLP(gpm2-2, INPUT, DOWN); PIN_SLP(gpm2-3, INPUT, DOWN); PIN_SLP(gpm2-4, INPUT, DOWN); PIN_SLP(gpm3-0, INPUT, DOWN); PIN_SLP(gpm3-1, INPUT, DOWN); PIN_SLP(gpm3-2, INPUT, DOWN); PIN_SLP(gpm3-3, INPUT, DOWN); PIN_SLP(gpm3-4, INPUT, DOWN); PIN_SLP(gpm3-5, INPUT, DOWN); PIN_SLP(gpm3-6, INPUT, DOWN); PIN_SLP(gpm3-7, INPUT, DOWN); PIN_SLP(gpm4-0, INPUT, DOWN); PIN_SLP(gpm4-1, INPUT, DOWN); PIN_SLP(gpm4-2, INPUT, DOWN); PIN_SLP(gpm4-3, INPUT, DOWN); PIN_SLP(gpm4-4, INPUT, DOWN); PIN_SLP(gpm4-5, INPUT, DOWN); PIN_SLP(gpm4-6, INPUT, DOWN); PIN_SLP(gpm4-7, INPUT, DOWN); }; };