// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright 2018 Boundary Devices */ /dts-v1/; #include #include "imx8mq.dtsi" / { model = "Boundary Devices i.MX8MQ Nitrogen8M"; compatible = "boundary,imx8mq-nitrogen8m", "fsl,imx8mq"; chosen { stdout-path = "serial0:115200n8"; }; memory@40000000 { device_type = "memory"; reg = <0x00000000 0x40000000 0 0x80000000>; }; gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; power { label = "Power Button"; gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; linux,code = ; wakeup-source; }; }; hdmi-connector { compatible = "hdmi-connector"; ddc-i2c-bus = <&ddc_i2c_bus>; label = "hdmi"; type = "a"; port { hdmi_connector_in: endpoint { remote-endpoint = <<8912_out>; }; }; }; reg_usb_otg_vbus: regulator-usb-otg-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_usbotg_vbus>; regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; enable-active-high; }; reg_vref_0v9: regulator-vref-0v9 { compatible = "regulator-fixed"; regulator-name = "vref-0v9"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; }; reg_vref_1v8: regulator-vref-1v8 { compatible = "regulator-fixed"; regulator-name = "vref-1v8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; reg_vref_2v5: regulator-vref-2v5 { compatible = "regulator-fixed"; regulator-name = "vref-2v5"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; }; reg_vref_3v3: regulator-vref-3v3 { compatible = "regulator-fixed"; regulator-name = "vref-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; reg_vref_5v: regulator-vref-5v { compatible = "regulator-fixed"; regulator-name = "vref-5v"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; }; &dphy { status = "okay"; }; &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; phy-mode = "rgmii-id"; phy-handle = <ðphy0>; fsl,magic-packet; status = "okay"; mdio { #address-cells = <1>; #size-cells = <0>; ethphy0: ethernet-phy@4 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <4>; interrupts-extended = <&gpio1 11 IRQ_TYPE_LEVEL_LOW>; }; }; }; /* Release reset of the USB Host HUB */ &gpio1 { usb-host-reset-hog { gpio-hog; gpios = <14 GPIO_ACTIVE_HIGH>; output-high; }; }; &i2c1 { clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; i2c-mux@70 { compatible = "nxp,pca9546"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1_pca9546>; reg = <0x70>; reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; #address-cells = <1>; #size-cells = <0>; i2c1a: i2c1@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; reg_arm_dram: regulator@60 { compatible = "fcs,fan53555"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_arm_dram>; reg = <0x60>; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1000000>; regulator-always-on; vsel-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; }; }; i2c1b: i2c1@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; reg_dram_1p1v: regulator@60 { compatible = "fcs,fan53555"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_dram_1p1v>; reg = <0x60>; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-always-on; vsel-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>; }; }; i2c1c: i2c1@2 { reg = <2>; #address-cells = <1>; #size-cells = <0>; reg_soc_gpu_vpu: regulator@60 { compatible = "fcs,fan53555"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_soc_gpu_vpu>; reg = <0x60>; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1000000>; regulator-always-on; vsel-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; }; }; i2c1d: i2c1@3 { reg = <3>; #address-cells = <1>; #size-cells = <0>; rtc@68 { compatible = "microcrystal,rv4162"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1d_rv4162>; reg = <0x68>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_LOW>; wakeup-source; }; }; }; }; &i2c4 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c4>; status = "okay"; pca9546: i2c-mux@70 { compatible = "nxp,pca9546"; reg = <0x70>; #address-cells = <1>; #size-cells = <0>; i2c4@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; clock-frequency = <100000>; hdmi-bridge@48 { compatible = "lontium,lt8912b"; reg = <0x48> ; reset-gpios = <&max7323 0 GPIO_ACTIVE_LOW>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; hdmi_out_in: endpoint { data-lanes = <1 2 3 4>; remote-endpoint = <&mipi_dsi_out>; }; }; port@1 { reg = <1>; lt8912_out: endpoint { remote-endpoint = <&hdmi_connector_in>; }; }; }; }; }; ddc_i2c_bus: i2c4@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; clock-frequency = <100000>; }; i2c4@3 { reg = <3>; #address-cells = <1>; #size-cells = <0>; clock-frequency = <100000>; max7323: gpio-expander@68 { compatible = "maxim,max7323"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_max7323>; gpio-controller; reg = <0x68>; #gpio-cells = <2>; }; }; }; }; &lcdif { status = "okay"; }; &mipi_dsi { #address-cells = <1>; #size-cells = <0>; status = "okay"; ports { port@1 { reg = <1>; mipi_dsi_out: endpoint { remote-endpoint = <&hdmi_out_in>; }; }; }; }; &uart1 { /* console */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; assigned-clocks = <&clk IMX8MQ_CLK_UART1>; assigned-clock-parents = <&clk IMX8MQ_CLK_25M>; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; assigned-clocks = <&clk IMX8MQ_CLK_UART2>; assigned-clock-parents = <&clk IMX8MQ_CLK_25M>; status = "okay"; }; &usb_dwc3_0 { dr_mode = "otg"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb3_0>; status = "okay"; }; &usb3_phy0 { vbus-supply = <®_usb_otg_vbus>; status = "okay"; }; &usb_dwc3_1 { dr_mode = "host"; status = "okay"; }; &usb3_phy1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb3_1>; status = "okay"; }; &usdhc1 { assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; assigned-clock-rates = <400000000>; bus-width = <8>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; non-removable; vmmc-supply = <®_vref_1v8>; status = "okay"; }; &wdog1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>; fsl,ext-reset-output; status = "okay"; }; &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; pinctrl_hog: hoggrp { fsl,pins = < /* J17 connector, odd */ MX8MQ_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x19 /* Pin 19 */ MX8MQ_IOMUXC_SAI1_RXC_GPIO4_IO1 0x19 /* Pin 21 */ MX8MQ_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x19 /* Pin 23 */ MX8MQ_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x19 /* Pin 25 */ MX8MQ_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x19 /* Pin 27 */ MX8MQ_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x19 /* Pin 29 */ MX8MQ_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x19 /* Pin 31 */ MX8MQ_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x19 /* Pin 33 */ MX8MQ_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x19 /* Pin 35 */ MX8MQ_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x19 /* Pin 39 */ MX8MQ_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x19 /* Pin 41 */ MX8MQ_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x19 /* Pin 43 */ MX8MQ_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x19 /* Pin 45 */ MX8MQ_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x19 /* Pin 47 */ MX8MQ_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x19 /* Pin 49 */ MX8MQ_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x19 /* Pin 51 */ /* J17 connector, even */ MX8MQ_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x19 /* Pin 44 */ MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29 0x19 /* Pin 48 */ MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 /* Pin 50 */ MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x19 /* Pin 54 */ MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x19 /* Pin 56 */ /* J18 connector, odd */ MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x19 /* Pin 41 */ MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x19 /* Pin 43 */ MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 /* Pin 45 */ MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x19 /* Pin 47 */ MX8MQ_IOMUXC_NAND_WP_B_GPIO3_IO18 0x19 /* Pin 49 */ MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14 0x19 /* Pin 53 */ /* J18 connector, even */ MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0 0x19 /* Pin 32 */ MX8MQ_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x19 /* Pin 36 */ MX8MQ_IOMUXC_NAND_DATA00_GPIO3_IO6 0x19 /* Pin 38 */ MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7 0x19 /* Pin 40 */ MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8 0x19 /* Pin 42 */ MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9 0x19 /* Pin 44 */ MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10 0x19 /* Pin 46 */ /* J13 Pin 2, WL_WAKE */ MX8MQ_IOMUXC_SAI5_RXD2_GPIO3_IO23 0xd6 /* J13 Pin 4, WL_IRQ, not needed for Silex */ MX8MQ_IOMUXC_SAI5_RXD0_GPIO3_IO21 0xd6 /* J13 pin 9, unused */ MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x19 /* J13 Pin 41, BT_CLK_REQ */ MX8MQ_IOMUXC_SAI5_RXD1_GPIO3_IO22 0xd6 /* J13 Pin 42, BT_HOST_WAKE */ MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25 0xd6 /* Clock for both CSI1 and CSI2 */ MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2 0x07 /* test points */ MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4 0xc1 /* TP87 */ >; }; pinctrl_fec1: fec1grp { fsl,pins = < MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23 MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x59 >; }; pinctrl_gpio_keys: gpio-keysgrp { fsl,pins = < MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19 >; }; pinctrl_i2c1: i2c1grp { fsl,pins = < MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f >; }; pinctrl_i2c1_pca9546: i2c1-pca9546grp { fsl,pins = < MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x49 >; }; pinctrl_i2c1d_rv4162: i2c1d-rv4162grp { fsl,pins = < MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x49 >; }; pinctrl_i2c4: i2c4grp { fsl,pins = < MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x4000007f MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x4000007f >; }; pinctrl_max7323: max7323grp { fsl,pins = < MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15 0x19 >; }; pinctrl_reg_arm_dram: reg-arm-dramgrp { fsl,pins = < MX8MQ_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x16 >; }; pinctrl_reg_dram_1p1v: reg-dram-1p1vgrp { fsl,pins = < MX8MQ_IOMUXC_SD1_STROBE_GPIO2_IO11 0x16 >; }; pinctrl_reg_soc_gpu_vpu: reg-soc-gpu-vpugrp { fsl,pins = < MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20 0x16 >; }; pinctrl_reg_usbotg_vbus: reg-usbotg-vbusgrp { fsl,pins = < MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x16 >; }; pinctrl_uart1: uart1grp { fsl,pins = < MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x45 MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x45 >; }; pinctrl_uart2: uart2grp { fsl,pins = < MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x45 MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x45 >; }; pinctrl_usb3_0: usb3-0grp { fsl,pins = < MX8MQ_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x16 >; }; pinctrl_usb3_1: usb3-1grp { fsl,pins = < MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x16 >; }; pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 MX8MQ_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x41 >; }; pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { fsl,pins = < MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd >; }; pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { fsl,pins = < MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf >; }; pinctrl_wdog: wdoggrp { fsl,pins = < MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 >; }; };