/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 1999 Hewlett-Packard (Frank Rowand) * Copyright (C) 1999 Philipp Rumpf * Copyright (C) 1999 SuSE GmbH */ #ifndef _PARISC_ASSEMBLY_H #define _PARISC_ASSEMBLY_H #define CALLEE_FLOAT_FRAME_SIZE 80 #ifdef CONFIG_64BIT #define LDREG ldd #define STREG std #define LDREGX ldd,s #define LDREGM ldd,mb #define STREGM std,ma #define SHRREG shrd #define SHLREG shld #define ANDCM andcm,* #define COND(x) * ## x #define RP_OFFSET 16 #define FRAME_SIZE 128 #define CALLEE_REG_FRAME_SIZE 144 #define REG_SZ 8 #define ASM_ULONG_INSN .dword #else /* CONFIG_64BIT */ #define LDREG ldw #define STREG stw #define LDREGX ldwx,s #define LDREGM ldwm #define STREGM stwm #define SHRREG shr #define SHLREG shlw #define ANDCM andcm #define COND(x) x #define RP_OFFSET 20 #define FRAME_SIZE 64 #define CALLEE_REG_FRAME_SIZE 128 #define REG_SZ 4 #define ASM_ULONG_INSN .word #endif #define CALLEE_SAVE_FRAME_SIZE (CALLEE_REG_FRAME_SIZE + CALLEE_FLOAT_FRAME_SIZE) #ifdef CONFIG_PA20 #define LDCW ldcw,co #define BL b,l # ifdef CONFIG_64BIT # define PA_ASM_LEVEL 2.0w # else # define PA_ASM_LEVEL 2.0 # endif #else #define LDCW ldcw #define BL bl #define PA_ASM_LEVEL 1.1 #endif #ifdef __ASSEMBLY__ #ifdef CONFIG_64BIT /* the 64-bit pa gnu assembler unfortunately defaults to .level 1.1 or 2.0 so * work around that for now... */ .level 2.0w #endif #include #include #include #include /* * We provide two versions of each macro to convert from physical * to virtual and vice versa. The "_r1" versions take one argument * register, but trashes r1 to do the conversion. The other * version takes two arguments: a src and destination register. * However, the source and destination registers can not be * the same register. */ .macro tophys grvirt, grphys ldil L%(__PAGE_OFFSET), \grphys sub \grvirt, \grphys, \grphys .endm .macro tovirt grphys, grvirt ldil L%(__PAGE_OFFSET), \grvirt add \grphys, \grvirt, \grvirt .endm .macro tophys_r1 gr ldil L%(__PAGE_OFFSET), %r1 sub \gr, %r1, \gr .endm .macro tovirt_r1 gr ldil L%(__PAGE_OFFSET), %r1 add \gr, %r1, \gr .endm .macro delay value ldil L%\value, 1 ldo R%\value(1), 1 addib,UV,n -1,1,. addib,NUV,n -1,1,.+8 nop .endm .macro debug value .endm .macro shlw r, sa, t zdep \r, 31-(\sa), 32-(\sa), \t .endm /* And the PA 2.0W shift left */ .macro shld r, sa, t depd,z \r, 63-(\sa), 64-(\sa), \t .endm /* Shift Right - note the r and t can NOT be the same! */ .macro shr r, sa, t extru \r, 31-(\sa), 32-(\sa), \t .endm /* pa20w version of shift right */ .macro shrd r, sa, t extrd,u \r, 63-(\sa), 64-(\sa), \t .endm /* load 32-bit 'value' into 'reg' compensating for the ldil * sign-extension when running in wide mode. * WARNING!! neither 'value' nor 'reg' can be expressions * containing '.'!!!! */ .macro load32 value, reg ldil L%\value, \reg ldo R%\value(\reg), \reg .endm .macro loadgp #ifdef CONFIG_64BIT ldil L%__gp, %r27 ldo R%__gp(%r27), %r27 #else ldil L%$global$, %r27 ldo R%$global$(%r27), %r27 #endif .endm #define SAVE_SP(r, where) mfsp r, %r1 ! STREG %r1, where #define REST_SP(r, where) LDREG where, %r1 ! mtsp %r1, r #define SAVE_CR(r, where) mfctl r, %r1 ! STREG %r1, where #define REST_CR(r, where) LDREG where, %r1 ! mtctl %r1, r .macro save_general regs STREG %r1, PT_GR1 (\regs) STREG %r2, PT_GR2 (\regs) STREG %r3, PT_GR3 (\regs) STREG %r4, PT_GR4 (\regs) STREG %r5, PT_GR5 (\regs) STREG %r6, PT_GR6 (\regs) STREG %r7, PT_GR7 (\regs) STREG %r8, PT_GR8 (\regs) STREG %r9, PT_GR9 (\regs) STREG %r10, PT_GR10(\regs) STREG %r11, PT_GR11(\regs) STREG %r12, PT_GR12(\regs) STREG %r13, PT_GR13(\regs) STREG %r14, PT_GR14(\regs) STREG %r15, PT_GR15(\regs) STREG %r16, PT_GR16(\regs) STREG %r17, PT_GR17(\regs) STREG %r18, PT_GR18(\regs) STREG %r19, PT_GR19(\regs) STREG %r20, PT_GR20(\regs) STREG %r21, PT_GR21(\regs) STREG %r22, PT_GR22(\regs) STREG %r23, PT_GR23(\regs) STREG %r24, PT_GR24(\regs) STREG %r25, PT_GR25(\regs) /* r26 is saved in get_stack and used to preserve a value across virt_map */ STREG %r27, PT_GR27(\regs) STREG %r28, PT_GR28(\regs) /* r29 is saved in get_stack and used to point to saved registers */ /* r30 stack pointer saved in get_stack */ STREG %r31, PT_GR31(\regs) .endm .macro rest_general regs /* r1 used as a temp in rest_stack and is restored there */ LDREG PT_GR2 (\regs), %r2 LDREG PT_GR3 (\regs), %r3 LDREG PT_GR4 (\regs), %r4 LDREG PT_GR5 (\regs), %r5 LDREG PT_GR6 (\regs), %r6 LDREG PT_GR7 (\regs), %r7 LDREG PT_GR8 (\regs), %r8 LDREG PT_GR9 (\regs), %r9 LDREG PT_GR10(\regs), %r10 LDREG PT_GR11(\regs), %r11 LDREG PT_GR12(\regs), %r12 LDREG PT_GR13(\regs), %r13 LDREG PT_GR14(\regs), %r14 LDREG PT_GR15(\regs), %r15 LDREG PT_GR16(\regs), %r16 LDREG PT_GR17(\regs), %r17 LDREG PT_GR18(\regs), %r18 LDREG PT_GR19(\regs), %r19 LDREG PT_GR20(\regs), %r20 LDREG PT_GR21(\regs), %r21 LDREG PT_GR22(\regs), %r22 LDREG PT_GR23(\regs), %r23 LDREG PT_GR24(\regs), %r24 LDREG PT_GR25(\regs), %r25 LDREG PT_GR26(\regs), %r26 LDREG PT_GR27(\regs), %r27 LDREG PT_GR28(\regs), %r28 /* r29 points to register save area, and is restored in rest_stack */ /* r30 stack pointer restored in rest_stack */ LDREG PT_GR31(\regs), %r31 .endm .macro save_fp regs fstd,ma %fr0, 8(\regs) fstd,ma %fr1, 8(\regs) fstd,ma %fr2, 8(\regs) fstd,ma %fr3, 8(\regs) fstd,ma %fr4, 8(\regs) fstd,ma %fr5, 8(\regs) fstd,ma %fr6, 8(\regs) fstd,ma %fr7, 8(\regs) fstd,ma %fr8, 8(\regs) fstd,ma %fr9, 8(\regs) fstd,ma %fr10, 8(\regs) fstd,ma %fr11, 8(\regs) fstd,ma %fr12, 8(\regs) fstd,ma %fr13, 8(\regs) fstd,ma %fr14, 8(\regs) fstd,ma %fr15, 8(\regs) fstd,ma %fr16, 8(\regs) fstd,ma %fr17, 8(\regs) fstd,ma %fr18, 8(\regs) fstd,ma %fr19, 8(\regs) fstd,ma %fr20, 8(\regs) fstd,ma %fr21, 8(\regs) fstd,ma %fr22, 8(\regs) fstd,ma %fr23, 8(\regs) fstd,ma %fr24, 8(\regs) fstd,ma %fr25, 8(\regs) fstd,ma %fr26, 8(\regs) fstd,ma %fr27, 8(\regs) fstd,ma %fr28, 8(\regs) fstd,ma %fr29, 8(\regs) fstd,ma %fr30, 8(\regs) fstd %fr31, 0(\regs) .endm .macro rest_fp regs fldd 0(\regs), %fr31 fldd,mb -8(\regs), %fr30 fldd,mb -8(\regs), %fr29 fldd,mb -8(\regs), %fr28 fldd,mb -8(\regs), %fr27 fldd,mb -8(\regs), %fr26 fldd,mb -8(\regs), %fr25 fldd,mb -8(\regs), %fr24 fldd,mb -8(\regs), %fr23 fldd,mb -8(\regs), %fr22 fldd,mb -8(\regs), %fr21 fldd,mb -8(\regs), %fr20 fldd,mb -8(\regs), %fr19 fldd,mb -8(\regs), %fr18 fldd,mb -8(\regs), %fr17 fldd,mb -8(\regs), %fr16 fldd,mb -8(\regs), %fr15 fldd,mb -8(\regs), %fr14 fldd,mb -8(\regs), %fr13 fldd,mb -8(\regs), %fr12 fldd,mb -8(\regs), %fr11 fldd,mb -8(\regs), %fr10 fldd,mb -8(\regs), %fr9 fldd,mb -8(\regs), %fr8 fldd,mb -8(\regs), %fr7 fldd,mb -8(\regs), %fr6 fldd,mb -8(\regs), %fr5 fldd,mb -8(\regs), %fr4 fldd,mb -8(\regs), %fr3 fldd,mb -8(\regs), %fr2 fldd,mb -8(\regs), %fr1 fldd,mb -8(\regs), %fr0 .endm .macro callee_save_float fstd,ma %fr12, 8(%r30) fstd,ma %fr13, 8(%r30) fstd,ma %fr14, 8(%r30) fstd,ma %fr15, 8(%r30) fstd,ma %fr16, 8(%r30) fstd,ma %fr17, 8(%r30) fstd,ma %fr18, 8(%r30) fstd,ma %fr19, 8(%r30) fstd,ma %fr20, 8(%r30) fstd,ma %fr21, 8(%r30) .endm .macro callee_rest_float fldd,mb -8(%r30), %fr21 fldd,mb -8(%r30), %fr20 fldd,mb -8(%r30), %fr19 fldd,mb -8(%r30), %fr18 fldd,mb -8(%r30), %fr17 fldd,mb -8(%r30), %fr16 fldd,mb -8(%r30), %fr15 fldd,mb -8(%r30), %fr14 fldd,mb -8(%r30), %fr13 fldd,mb -8(%r30), %fr12 .endm #ifdef CONFIG_64BIT .macro callee_save std,ma %r3, CALLEE_REG_FRAME_SIZE(%r30) mfctl %cr27, %r3 std %r4, -136(%r30) std %r5, -128(%r30) std %r6, -120(%r30) std %r7, -112(%r30) std %r8, -104(%r30) std %r9, -96(%r30) std %r10, -88(%r30) std %r11, -80(%r30) std %r12, -72(%r30) std %r13, -64(%r30) std %r14, -56(%r30) std %r15, -48(%r30) std %r16, -40(%r30) std %r17, -32(%r30) std %r18, -24(%r30) std %r3, -16(%r30) .endm .macro callee_rest ldd -16(%r30), %r3 ldd -24(%r30), %r18 ldd -32(%r30), %r17 ldd -40(%r30), %r16 ldd -48(%r30), %r15 ldd -56(%r30), %r14 ldd -64(%r30), %r13 ldd -72(%r30), %r12 ldd -80(%r30), %r11 ldd -88(%r30), %r10 ldd -96(%r30), %r9 ldd -104(%r30), %r8 ldd -112(%r30), %r7 ldd -120(%r30), %r6 ldd -128(%r30), %r5 ldd -136(%r30), %r4 mtctl %r3, %cr27 ldd,mb -CALLEE_REG_FRAME_SIZE(%r30), %r3 .endm #else /* ! CONFIG_64BIT */ .macro callee_save stw,ma %r3, CALLEE_REG_FRAME_SIZE(%r30) mfctl %cr27, %r3 stw %r4, -124(%r30) stw %r5, -120(%r30) stw %r6, -116(%r30) stw %r7, -112(%r30) stw %r8, -108(%r30) stw %r9, -104(%r30) stw %r10, -100(%r30) stw %r11, -96(%r30) stw %r12, -92(%r30) stw %r13, -88(%r30) stw %r14, -84(%r30) stw %r15, -80(%r30) stw %r16, -76(%r30) stw %r17, -72(%r30) stw %r18, -68(%r30) stw %r3, -64(%r30) .endm .macro callee_rest ldw -64(%r30), %r3 ldw -68(%r30), %r18 ldw -72(%r30), %r17 ldw -76(%r30), %r16 ldw -80(%r30), %r15 ldw -84(%r30), %r14 ldw -88(%r30), %r13 ldw -92(%r30), %r12 ldw -96(%r30), %r11 ldw -100(%r30), %r10 ldw -104(%r30), %r9 ldw -108(%r30), %r8 ldw -112(%r30), %r7 ldw -116(%r30), %r6 ldw -120(%r30), %r5 ldw -124(%r30), %r4 mtctl %r3, %cr27 ldw,mb -CALLEE_REG_FRAME_SIZE(%r30), %r3 .endm #endif /* ! CONFIG_64BIT */ .macro save_specials regs SAVE_SP (%sr0, PT_SR0 (\regs)) SAVE_SP (%sr1, PT_SR1 (\regs)) SAVE_SP (%sr2, PT_SR2 (\regs)) SAVE_SP (%sr3, PT_SR3 (\regs)) SAVE_SP (%sr4, PT_SR4 (\regs)) SAVE_SP (%sr5, PT_SR5 (\regs)) SAVE_SP (%sr6, PT_SR6 (\regs)) SAVE_CR (%cr17, PT_IASQ0(\regs)) mtctl %r0, %cr17 SAVE_CR (%cr17, PT_IASQ1(\regs)) SAVE_CR (%cr18, PT_IAOQ0(\regs)) mtctl %r0, %cr18 SAVE_CR (%cr18, PT_IAOQ1(\regs)) #ifdef CONFIG_64BIT /* cr11 (sar) is a funny one. 5 bits on PA1.1 and 6 bit on PA2.0 * For PA2.0 mtsar or mtctl always write 6 bits, but mfctl only * reads 5 bits. Use mfctl,w to read all six bits. Otherwise * we lose the 6th bit on a save/restore over interrupt. */ mfctl,w %cr11, %r1 STREG %r1, PT_SAR (\regs) #else SAVE_CR (%cr11, PT_SAR (\regs)) #endif SAVE_CR (%cr19, PT_IIR (\regs)) /* * Code immediately following this macro (in intr_save) relies * on r8 containing ipsw. */ mfctl %cr22, %r8 STREG %r8, PT_PSW(\regs) .endm .macro rest_specials regs REST_SP (%sr0, PT_SR0 (\regs)) REST_SP (%sr1, PT_SR1 (\regs)) REST_SP (%sr2, PT_SR2 (\regs)) REST_SP (%sr3, PT_SR3 (\regs)) REST_SP (%sr4, PT_SR4 (\regs)) REST_SP (%sr5, PT_SR5 (\regs)) REST_SP (%sr6, PT_SR6 (\regs)) REST_SP (%sr7, PT_SR7 (\regs)) REST_CR (%cr17, PT_IASQ0(\regs)) REST_CR (%cr17, PT_IASQ1(\regs)) REST_CR (%cr18, PT_IAOQ0(\regs)) REST_CR (%cr18, PT_IAOQ1(\regs)) REST_CR (%cr11, PT_SAR (\regs)) REST_CR (%cr22, PT_PSW (\regs)) .endm /* First step to create a "relied upon translation" * See PA 2.0 Arch. page F-4 and F-5. * * The ssm was originally necessary due to a "PCxT bug". * But someone decided it needed to be added to the architecture * and this "feature" went into rev3 of PA-RISC 1.1 Arch Manual. * It's been carried forward into PA 2.0 Arch as well. :^( * * "ssm 0,%r0" is a NOP with side effects (prefetch barrier). * rsm/ssm prevents the ifetch unit from speculatively fetching * instructions past this line in the code stream. * PA 2.0 processor will single step all insn in the same QUAD (4 insn). */ .macro pcxt_ssm_bug rsm PSW_SM_I,%r0 nop /* 1 */ nop /* 2 */ nop /* 3 */ nop /* 4 */ nop /* 5 */ nop /* 6 */ nop /* 7 */ .endm /* * ASM_EXCEPTIONTABLE_ENTRY * * Creates an exception table entry. * Do not convert to a assembler macro. This won't work. */ #define ASM_EXCEPTIONTABLE_ENTRY(fault_addr, except_addr) \ .section __ex_table,"aw" ! \ .word (fault_addr - .), (except_addr - .) ! \ .previous #endif /* __ASSEMBLY__ */ #endif