// SPDX-License-Identifier: GPL-2.0 /* * linux/arch/parisc/kernel/time.c * * Copyright (C) 1991, 1992, 1995 Linus Torvalds * Modifications for ARM (C) 1994, 1995, 1996,1997 Russell King * Copyright (C) 1999 SuSE GmbH, (Philipp Rumpf, prumpf@tux.org) * * 1994-07-02 Alan Modra * fixed set_rtc_mmss, fixed time.year for >= 2000, new mktime * 1998-12-20 Updated NTP code according to technical memorandum Jan '96 * "A Kernel Model for Precision Timekeeping" by Dave Mills */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static unsigned long clocktick __ro_after_init; /* timer cycles per tick */ /* * We keep time on PA-RISC Linux by using the Interval Timer which is * a pair of registers; one is read-only and one is write-only; both * accessed through CR16. The read-only register is 32 or 64 bits wide, * and increments by 1 every CPU clock tick. The architecture only * guarantees us a rate between 0.5 and 2, but all implementations use a * rate of 1. The write-only register is 32-bits wide. When the lowest * 32 bits of the read-only register compare equal to the write-only * register, it raises a maskable external interrupt. Each processor has * an Interval Timer of its own and they are not synchronised. * * We want to generate an interrupt every 1/HZ seconds. So we program * CR16 to interrupt every @clocktick cycles. The it_value in cpu_data * is programmed with the intended time of the next tick. We can be * held off for an arbitrarily long period of time by interrupts being * disabled, so we may miss one or more ticks. */ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id) { unsigned long now; unsigned long next_tick; unsigned long ticks_elapsed = 0; unsigned int cpu = smp_processor_id(); struct cpuinfo_parisc *cpuinfo = &per_cpu(cpu_data, cpu); /* gcc can optimize for "read-only" case with a local clocktick */ unsigned long cpt = clocktick; /* Initialize next_tick to the old expected tick time. */ next_tick = cpuinfo->it_value; /* Calculate how many ticks have elapsed. */ now = mfctl(16); do { ++ticks_elapsed; next_tick += cpt; } while (next_tick - now > cpt); /* Store (in CR16 cycles) up to when we are accounting right now. */ cpuinfo->it_value = next_tick; /* Go do system house keeping. */ if (cpu != 0) ticks_elapsed = 0; legacy_timer_tick(ticks_elapsed); /* Skip clockticks on purpose if we know we would miss those. * The new CR16 must be "later" than current CR16 otherwise * itimer would not fire until CR16 wrapped - e.g 4 seconds * later on a 1Ghz processor. We'll account for the missed * ticks on the next timer interrupt. * We want IT to fire modulo clocktick even if we miss/skip some. * But those interrupts don't in fact get delivered that regularly. * * "next_tick - now" will always give the difference regardless * if one or the other wrapped. If "now" is "bigger" we'll end up * with a very large unsigned number. */ now = mfctl(16); while (next_tick - now > cpt) next_tick += cpt; /* Program the IT when to deliver the next interrupt. * Only bottom 32-bits of next_tick are writable in CR16! * Timer interrupt will be delivered at least a few hundred cycles * after the IT fires, so if we are too close (<= 8000 cycles) to the * next cycle, simply skip it. */ if (next_tick - now <= 8000) next_tick += cpt; mtctl(next_tick, 16); return IRQ_HANDLED; } unsigned long profile_pc(struct pt_regs *regs) { unsigned long pc = instruction_pointer(regs); if (regs->gr[0] & PSW_N) pc -= 4; #ifdef CONFIG_SMP if (in_lock_functions(pc)) pc = regs->gr[2]; #endif return pc; } EXPORT_SYMBOL(profile_pc); /* clock source code */ static u64 notrace read_cr16(struct clocksource *cs) { return get_cycles(); } static struct clocksource clocksource_cr16 = { .name = "cr16", .rating = 300, .read = read_cr16, .mask = CLOCKSOURCE_MASK(BITS_PER_LONG), .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; void __init start_cpu_itimer(void) { unsigned int cpu = smp_processor_id(); unsigned long next_tick = mfctl(16) + clocktick; mtctl(next_tick, 16); /* kick off Interval Timer (CR16) */ per_cpu(cpu_data, cpu).it_value = next_tick; } #if IS_ENABLED(CONFIG_RTC_DRV_GENERIC) static int rtc_generic_get_time(struct device *dev, struct rtc_time *tm) { struct pdc_tod tod_data; memset(tm, 0, sizeof(*tm)); if (pdc_tod_read(&tod_data) < 0) return -EOPNOTSUPP; /* we treat tod_sec as unsigned, so this can work until year 2106 */ rtc_time64_to_tm(tod_data.tod_sec, tm); return 0; } static int rtc_generic_set_time(struct device *dev, struct rtc_time *tm) { time64_t secs = rtc_tm_to_time64(tm); int ret; /* hppa has Y2K38 problem: pdc_tod_set() takes an u32 value! */ ret = pdc_tod_set(secs, 0); if (ret != 0) { pr_warn("pdc_tod_set(%lld) returned error %d\n", secs, ret); if (ret == PDC_INVALID_ARG) return -EINVAL; return -EOPNOTSUPP; } return 0; } static const struct rtc_class_ops rtc_generic_ops = { .read_time = rtc_generic_get_time, .set_time = rtc_generic_set_time, }; static int __init rtc_init(void) { struct platform_device *pdev; pdev = platform_device_register_data(NULL, "rtc-generic", -1, &rtc_generic_ops, sizeof(rtc_generic_ops)); return PTR_ERR_OR_ZERO(pdev); } device_initcall(rtc_init); #endif void read_persistent_clock64(struct timespec64 *ts) { static struct pdc_tod tod_data; if (pdc_tod_read(&tod_data) == 0) { ts->tv_sec = tod_data.tod_sec; ts->tv_nsec = tod_data.tod_usec * 1000; } else { printk(KERN_ERR "Error reading tod clock\n"); ts->tv_sec = 0; ts->tv_nsec = 0; } } static u64 notrace read_cr16_sched_clock(void) { return get_cycles(); } /* * timer interrupt and sched_clock() initialization */ void __init time_init(void) { unsigned long cr16_hz; clocktick = (100 * PAGE0->mem_10msec) / HZ; start_cpu_itimer(); /* get CPU 0 started */ cr16_hz = 100 * PAGE0->mem_10msec; /* Hz */ /* register as sched_clock source */ sched_clock_register(read_cr16_sched_clock, BITS_PER_LONG, cr16_hz); } static int __init init_cr16_clocksource(void) { /* * The cr16 interval timers are not synchronized across CPUs. */ if (num_online_cpus() > 1 && !running_on_qemu) { clocksource_cr16.name = "cr16_unstable"; clocksource_cr16.flags = CLOCK_SOURCE_UNSTABLE; clocksource_cr16.rating = 0; } /* register at clocksource framework */ clocksource_register_hz(&clocksource_cr16, 100 * PAGE0->mem_10msec); return 0; } device_initcall(init_cr16_clocksource);