// SPDX-License-Identifier: GPL-2.0-or-later
/*
 *  Bluetooth HCI serdev driver lib
 *
 *  Copyright (C) 2017  Linaro, Ltd., Rob Herring <robh@kernel.org>
 *
 *  Based on hci_ldisc.c:
 *
 *  Copyright (C) 2000-2001  Qualcomm Incorporated
 *  Copyright (C) 2002-2003  Maxim Krasnyansky <maxk@qualcomm.com>
 *  Copyright (C) 2004-2005  Marcel Holtmann <marcel@holtmann.org>
 */

#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/serdev.h>
#include <linux/skbuff.h>

#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>

#include "hci_uart.h"

static inline void hci_uart_tx_complete(struct hci_uart *hu, int pkt_type)
{
	struct hci_dev *hdev = hu->hdev;

	/* Update HCI stat counters */
	switch (pkt_type) {
	case HCI_COMMAND_PKT:
		hdev->stat.cmd_tx++;
		break;

	case HCI_ACLDATA_PKT:
		hdev->stat.acl_tx++;
		break;

	case HCI_SCODATA_PKT:
		hdev->stat.sco_tx++;
		break;
	}
}

static inline struct sk_buff *hci_uart_dequeue(struct hci_uart *hu)
{
	struct sk_buff *skb = hu->tx_skb;

	if (!skb) {
		if (test_bit(HCI_UART_PROTO_READY, &hu->flags))
			skb = hu->proto->dequeue(hu);
	} else
		hu->tx_skb = NULL;

	return skb;
}

static void hci_uart_write_work(struct work_struct *work)
{
	struct hci_uart *hu = container_of(work, struct hci_uart, write_work);
	struct serdev_device *serdev = hu->serdev;
	struct hci_dev *hdev = hu->hdev;
	struct sk_buff *skb;

	/* REVISIT:
	 * should we cope with bad skbs or ->write() returning an error value?
	 */
	do {
		clear_bit(HCI_UART_TX_WAKEUP, &hu->tx_state);

		while ((skb = hci_uart_dequeue(hu))) {
			int len;

			len = serdev_device_write_buf(serdev,
						      skb->data, skb->len);
			hdev->stat.byte_tx += len;

			skb_pull(skb, len);
			if (skb->len) {
				hu->tx_skb = skb;
				break;
			}

			hci_uart_tx_complete(hu, hci_skb_pkt_type(skb));
			kfree_skb(skb);
		}

		clear_bit(HCI_UART_SENDING, &hu->tx_state);
	} while (test_bit(HCI_UART_TX_WAKEUP, &hu->tx_state));
}

/* ------- Interface to HCI layer ------ */

/* Reset device */
static int hci_uart_flush(struct hci_dev *hdev)
{
	struct hci_uart *hu  = hci_get_drvdata(hdev);

	BT_DBG("hdev %p serdev %p", hdev, hu->serdev);

	if (hu->tx_skb) {
		kfree_skb(hu->tx_skb); hu->tx_skb = NULL;
	}

	/* Flush any pending characters in the driver and discipline. */
	serdev_device_write_flush(hu->serdev);

	if (test_bit(HCI_UART_PROTO_READY, &hu->flags))
		hu->proto->flush(hu);

	return 0;
}

/* Initialize device */
static int hci_uart_open(struct hci_dev *hdev)
{
	struct hci_uart *hu = hci_get_drvdata(hdev);
	int err;

	BT_DBG("%s %p", hdev->name, hdev);

	/* When Quirk HCI_QUIRK_NON_PERSISTENT_SETUP is set by
	 * driver, BT SoC is completely turned OFF during
	 * BT OFF. Upon next BT ON UART port should be opened.
	 */
	if (!test_bit(HCI_UART_PROTO_READY, &hu->flags)) {
		err = serdev_device_open(hu->serdev);
		if (err)
			return err;
		set_bit(HCI_UART_PROTO_READY, &hu->flags);
	}

	/* Undo clearing this from hci_uart_close() */
	hdev->flush = hci_uart_flush;

	return 0;
}

/* Close device */
static int hci_uart_close(struct hci_dev *hdev)
{
	struct hci_uart *hu = hci_get_drvdata(hdev);

	BT_DBG("hdev %p", hdev);

	if (!test_bit(HCI_UART_PROTO_READY, &hu->flags))
		return 0;

	hci_uart_flush(hdev);
	hdev->flush = NULL;

	/* When QUIRK HCI_QUIRK_NON_PERSISTENT_SETUP is set by driver,
	 * BT SOC is completely powered OFF during BT OFF, holding port
	 * open may drain the battery.
	 */
	if (test_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks)) {
		clear_bit(HCI_UART_PROTO_READY, &hu->flags);
		serdev_device_close(hu->serdev);
	}

	return 0;
}

/* Send frames from HCI layer */
static int hci_uart_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
{
	struct hci_uart *hu = hci_get_drvdata(hdev);

	BT_DBG("%s: type %d len %d", hdev->name, hci_skb_pkt_type(skb),
	       skb->len);

	hu->proto->enqueue(hu, skb);

	hci_uart_tx_wakeup(hu);

	return 0;
}

static int hci_uart_setup(struct hci_dev *hdev)
{
	struct hci_uart *hu = hci_get_drvdata(hdev);
	struct hci_rp_read_local_version *ver;
	struct sk_buff *skb;
	unsigned int speed;
	int err;

	/* Init speed if any */
	if (hu->init_speed)
		speed = hu->init_speed;
	else if (hu->proto->init_speed)
		speed = hu->proto->init_speed;
	else
		speed = 0;

	if (speed)
		serdev_device_set_baudrate(hu->serdev, speed);

	/* Operational speed if any */
	if (hu->oper_speed)
		speed = hu->oper_speed;
	else if (hu->proto->oper_speed)
		speed = hu->proto->oper_speed;
	else
		speed = 0;

	if (hu->proto->set_baudrate && speed) {
		err = hu->proto->set_baudrate(hu, speed);
		if (err)
			bt_dev_err(hdev, "Failed to set baudrate");
		else
			serdev_device_set_baudrate(hu->serdev, speed);
	}

	if (hu->proto->setup)
		return hu->proto->setup(hu);

	if (!test_bit(HCI_UART_VND_DETECT, &hu->hdev_flags))
		return 0;

	skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
			     HCI_INIT_TIMEOUT);
	if (IS_ERR(skb)) {
		bt_dev_err(hdev, "Reading local version info failed (%ld)",
			   PTR_ERR(skb));
		return 0;
	}

	if (skb->len != sizeof(*ver))
		bt_dev_err(hdev, "Event length mismatch for version info");

	kfree_skb(skb);
	return 0;
}

/** hci_uart_write_wakeup - transmit buffer wakeup
 * @serdev: serial device
 *
 * This function is called by the serdev framework when it accepts
 * more data being sent.
 */
static void hci_uart_write_wakeup(struct serdev_device *serdev)
{
	struct hci_uart *hu = serdev_device_get_drvdata(serdev);

	BT_DBG("");

	if (!hu || serdev != hu->serdev) {
		WARN_ON(1);
		return;
	}

	if (test_bit(HCI_UART_PROTO_READY, &hu->flags))
		hci_uart_tx_wakeup(hu);
}

/** hci_uart_receive_buf - receive buffer wakeup
 * @serdev: serial device
 * @data:   pointer to received data
 * @count:  count of received data in bytes
 *
 * This function is called by the serdev framework when it received data
 * in the RX buffer.
 *
 * Return: number of processed bytes
 */
static int hci_uart_receive_buf(struct serdev_device *serdev, const u8 *data,
				   size_t count)
{
	struct hci_uart *hu = serdev_device_get_drvdata(serdev);

	if (!hu || serdev != hu->serdev) {
		WARN_ON(1);
		return 0;
	}

	if (!test_bit(HCI_UART_PROTO_READY, &hu->flags))
		return 0;

	/* It does not need a lock here as it is already protected by a mutex in
	 * tty caller
	 */
	hu->proto->recv(hu, data, count);

	if (hu->hdev)
		hu->hdev->stat.byte_rx += count;

	return count;
}

static const struct serdev_device_ops hci_serdev_client_ops = {
	.receive_buf = hci_uart_receive_buf,
	.write_wakeup = hci_uart_write_wakeup,
};

int hci_uart_register_device(struct hci_uart *hu,
			     const struct hci_uart_proto *p)
{
	int err;
	struct hci_dev *hdev;

	BT_DBG("");

	serdev_device_set_client_ops(hu->serdev, &hci_serdev_client_ops);

	if (percpu_init_rwsem(&hu->proto_lock))
		return -ENOMEM;

	err = serdev_device_open(hu->serdev);
	if (err)
		goto err_rwsem;

	err = p->open(hu);
	if (err)
		goto err_open;

	hu->proto = p;
	set_bit(HCI_UART_PROTO_READY, &hu->flags);

	/* Initialize and register HCI device */
	hdev = hci_alloc_dev();
	if (!hdev) {
		BT_ERR("Can't allocate HCI device");
		err = -ENOMEM;
		goto err_alloc;
	}

	hu->hdev = hdev;

	hdev->bus = HCI_UART;
	hci_set_drvdata(hdev, hu);

	INIT_WORK(&hu->init_ready, hci_uart_init_work);
	INIT_WORK(&hu->write_work, hci_uart_write_work);

	/* Only when vendor specific setup callback is provided, consider
	 * the manufacturer information valid. This avoids filling in the
	 * value for Ericsson when nothing is specified.
	 */
	if (hu->proto->setup)
		hdev->manufacturer = hu->proto->manufacturer;

	hdev->open  = hci_uart_open;
	hdev->close = hci_uart_close;
	hdev->flush = hci_uart_flush;
	hdev->send  = hci_uart_send_frame;
	hdev->setup = hci_uart_setup;
	SET_HCIDEV_DEV(hdev, &hu->serdev->dev);

	if (test_bit(HCI_UART_NO_SUSPEND_NOTIFIER, &hu->flags))
		set_bit(HCI_QUIRK_NO_SUSPEND_NOTIFIER, &hdev->quirks);

	if (test_bit(HCI_UART_RAW_DEVICE, &hu->hdev_flags))
		set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);

	if (test_bit(HCI_UART_EXT_CONFIG, &hu->hdev_flags))
		set_bit(HCI_QUIRK_EXTERNAL_CONFIG, &hdev->quirks);

	if (test_bit(HCI_UART_CREATE_AMP, &hu->hdev_flags))
		hdev->dev_type = HCI_AMP;
	else
		hdev->dev_type = HCI_PRIMARY;

	if (test_bit(HCI_UART_INIT_PENDING, &hu->hdev_flags))
		return 0;

	if (hci_register_dev(hdev) < 0) {
		BT_ERR("Can't register HCI device");
		err = -ENODEV;
		goto err_register;
	}

	set_bit(HCI_UART_REGISTERED, &hu->flags);

	return 0;

err_register:
	hci_free_dev(hdev);
err_alloc:
	clear_bit(HCI_UART_PROTO_READY, &hu->flags);
	p->close(hu);
err_open:
	serdev_device_close(hu->serdev);
err_rwsem:
	percpu_free_rwsem(&hu->proto_lock);
	return err;
}
EXPORT_SYMBOL_GPL(hci_uart_register_device);

void hci_uart_unregister_device(struct hci_uart *hu)
{
	struct hci_dev *hdev = hu->hdev;

	cancel_work_sync(&hu->init_ready);
	if (test_bit(HCI_UART_REGISTERED, &hu->flags))
		hci_unregister_dev(hdev);
	hci_free_dev(hdev);

	cancel_work_sync(&hu->write_work);

	hu->proto->close(hu);

	if (test_bit(HCI_UART_PROTO_READY, &hu->flags)) {
		clear_bit(HCI_UART_PROTO_READY, &hu->flags);
		serdev_device_close(hu->serdev);
	}
	percpu_free_rwsem(&hu->proto_lock);
}
EXPORT_SYMBOL_GPL(hci_uart_unregister_device);