/* * Copyright (c) 2016 Intel Corporation * * Permission to use, copy, modify, distribute, and sell this software and its * documentation for any purpose is hereby granted without fee, provided that * the above copyright notice appear in all copies and that both that copyright * notice and this permission notice appear in supporting documentation, and * that the name of the copyright holders not be used in advertising or * publicity pertaining to distribution of the software without specific, * written prior permission. The copyright holders make no representations * about the suitability of this software for any purpose. It is provided "as * is" without express or implied warranty. * * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE * OF THIS SOFTWARE. */ #include #include #include #include #include #include #include #include #include #include #include #include "drm_crtc_internal.h" /** * DOC: overview * * A plane represents an image source that can be blended with or overlaid on * top of a CRTC during the scanout process. Planes take their input data from a * &drm_framebuffer object. The plane itself specifies the cropping and scaling * of that image, and where it is placed on the visible area of a display * pipeline, represented by &drm_crtc. A plane can also have additional * properties that specify how the pixels are positioned and blended, like * rotation or Z-position. All these properties are stored in &drm_plane_state. * * To create a plane, a KMS drivers allocates and zeroes an instances of * &struct drm_plane (possibly as part of a larger structure) and registers it * with a call to drm_universal_plane_init(). * * Each plane has a type, see enum drm_plane_type. A plane can be compatible * with multiple CRTCs, see &drm_plane.possible_crtcs. * * Each CRTC must have a unique primary plane userspace can attach to enable * the CRTC. In other words, userspace must be able to attach a different * primary plane to each CRTC at the same time. Primary planes can still be * compatible with multiple CRTCs. There must be exactly as many primary planes * as there are CRTCs. * * Legacy uAPI doesn't expose the primary and cursor planes directly. DRM core * relies on the driver to set the primary and optionally the cursor plane used * for legacy IOCTLs. This is done by calling drm_crtc_init_with_planes(). All * drivers must provide one primary plane per CRTC to avoid surprising legacy * userspace too much. */ /** * DOC: standard plane properties * * DRM planes have a few standardized properties: * * type: * Immutable property describing the type of the plane. * * For user-space which has enabled the &DRM_CLIENT_CAP_ATOMIC capability, * the plane type is just a hint and is mostly superseded by atomic * test-only commits. The type hint can still be used to come up more * easily with a plane configuration accepted by the driver. * * The value of this property can be one of the following: * * "Primary": * To light up a CRTC, attaching a primary plane is the most likely to * work if it covers the whole CRTC and doesn't have scaling or * cropping set up. * * Drivers may support more features for the primary plane, user-space * can find out with test-only atomic commits. * * Some primary planes are implicitly used by the kernel in the legacy * IOCTLs &DRM_IOCTL_MODE_SETCRTC and &DRM_IOCTL_MODE_PAGE_FLIP. * Therefore user-space must not mix explicit usage of any primary * plane (e.g. through an atomic commit) with these legacy IOCTLs. * * "Cursor": * To enable this plane, using a framebuffer configured without scaling * or cropping and with the following properties is the most likely to * work: * * - If the driver provides the capabilities &DRM_CAP_CURSOR_WIDTH and * &DRM_CAP_CURSOR_HEIGHT, create the framebuffer with this size. * Otherwise, create a framebuffer with the size 64x64. * - If the driver doesn't support modifiers, create a framebuffer with * a linear layout. Otherwise, use the IN_FORMATS plane property. * * Drivers may support more features for the cursor plane, user-space * can find out with test-only atomic commits. * * Some cursor planes are implicitly used by the kernel in the legacy * IOCTLs &DRM_IOCTL_MODE_CURSOR and &DRM_IOCTL_MODE_CURSOR2. * Therefore user-space must not mix explicit usage of any cursor * plane (e.g. through an atomic commit) with these legacy IOCTLs. * * Some drivers may support cursors even if no cursor plane is exposed. * In this case, the legacy cursor IOCTLs can be used to configure the * cursor. * * "Overlay": * Neither primary nor cursor. * * Overlay planes are the only planes exposed when the * &DRM_CLIENT_CAP_UNIVERSAL_PLANES capability is disabled. * * IN_FORMATS: * Blob property which contains the set of buffer format and modifier * pairs supported by this plane. The blob is a struct * drm_format_modifier_blob. Without this property the plane doesn't * support buffers with modifiers. Userspace cannot change this property. * * Note that userspace can check the &DRM_CAP_ADDFB2_MODIFIERS driver * capability for general modifier support. If this flag is set then every * plane will have the IN_FORMATS property, even when it only supports * DRM_FORMAT_MOD_LINEAR. Before linux kernel release v5.1 there have been * various bugs in this area with inconsistencies between the capability * flag and per-plane properties. */ static unsigned int drm_num_planes(struct drm_device *dev) { unsigned int num = 0; struct drm_plane *tmp; drm_for_each_plane(tmp, dev) { num++; } return num; } static inline u32 * formats_ptr(struct drm_format_modifier_blob *blob) { return (u32 *)(((char *)blob) + blob->formats_offset); } static inline struct drm_format_modifier * modifiers_ptr(struct drm_format_modifier_blob *blob) { return (struct drm_format_modifier *)(((char *)blob) + blob->modifiers_offset); } static int create_in_format_blob(struct drm_device *dev, struct drm_plane *plane) { const struct drm_mode_config *config = &dev->mode_config; struct drm_property_blob *blob; struct drm_format_modifier *mod; size_t blob_size, formats_size, modifiers_size; struct drm_format_modifier_blob *blob_data; unsigned int i, j; formats_size = sizeof(__u32) * plane->format_count; if (WARN_ON(!formats_size)) { /* 0 formats are never expected */ return 0; } modifiers_size = sizeof(struct drm_format_modifier) * plane->modifier_count; blob_size = sizeof(struct drm_format_modifier_blob); /* Modifiers offset is a pointer to a struct with a 64 bit field so it * should be naturally aligned to 8B. */ BUILD_BUG_ON(sizeof(struct drm_format_modifier_blob) % 8); blob_size += ALIGN(formats_size, 8); blob_size += modifiers_size; blob = drm_property_create_blob(dev, blob_size, NULL); if (IS_ERR(blob)) return -1; blob_data = blob->data; blob_data->version = FORMAT_BLOB_CURRENT; blob_data->count_formats = plane->format_count; blob_data->formats_offset = sizeof(struct drm_format_modifier_blob); blob_data->count_modifiers = plane->modifier_count; blob_data->modifiers_offset = ALIGN(blob_data->formats_offset + formats_size, 8); memcpy(formats_ptr(blob_data), plane->format_types, formats_size); /* If we can't determine support, just bail */ if (!plane->funcs->format_mod_supported) goto done; mod = modifiers_ptr(blob_data); for (i = 0; i < plane->modifier_count; i++) { for (j = 0; j < plane->format_count; j++) { if (plane->funcs->format_mod_supported(plane, plane->format_types[j], plane->modifiers[i])) { mod->formats |= 1ULL << j; } } mod->modifier = plane->modifiers[i]; mod->offset = 0; mod->pad = 0; mod++; } done: drm_object_attach_property(&plane->base, config->modifiers_property, blob->base.id); return 0; } __printf(9, 0) static int __drm_universal_plane_init(struct drm_device *dev, struct drm_plane *plane, uint32_t possible_crtcs, const struct drm_plane_funcs *funcs, const uint32_t *formats, unsigned int format_count, const uint64_t *format_modifiers, enum drm_plane_type type, const char *name, va_list ap) { struct drm_mode_config *config = &dev->mode_config; unsigned int format_modifier_count = 0; int ret; /* plane index is used with 32bit bitmasks */ if (WARN_ON(config->num_total_plane >= 32)) return -EINVAL; /* * First driver to need more than 64 formats needs to fix this. Each * format is encoded as a bit and the current code only supports a u64. */ if (WARN_ON(format_count > 64)) return -EINVAL; WARN_ON(drm_drv_uses_atomic_modeset(dev) && (!funcs->atomic_destroy_state || !funcs->atomic_duplicate_state)); ret = drm_mode_object_add(dev, &plane->base, DRM_MODE_OBJECT_PLANE); if (ret) return ret; drm_modeset_lock_init(&plane->mutex); plane->base.properties = &plane->properties; plane->dev = dev; plane->funcs = funcs; plane->format_types = kmalloc_array(format_count, sizeof(uint32_t), GFP_KERNEL); if (!plane->format_types) { DRM_DEBUG_KMS("out of memory when allocating plane\n"); drm_mode_object_unregister(dev, &plane->base); return -ENOMEM; } if (format_modifiers) { const uint64_t *temp_modifiers = format_modifiers; while (*temp_modifiers++ != DRM_FORMAT_MOD_INVALID) format_modifier_count++; } /* autoset the cap and check for consistency across all planes */ if (format_modifier_count) { drm_WARN_ON(dev, !config->allow_fb_modifiers && !list_empty(&config->plane_list)); config->allow_fb_modifiers = true; } else { drm_WARN_ON(dev, config->allow_fb_modifiers); } plane->modifier_count = format_modifier_count; plane->modifiers = kmalloc_array(format_modifier_count, sizeof(format_modifiers[0]), GFP_KERNEL); if (format_modifier_count && !plane->modifiers) { DRM_DEBUG_KMS("out of memory when allocating plane\n"); kfree(plane->format_types); drm_mode_object_unregister(dev, &plane->base); return -ENOMEM; } if (name) { plane->name = kvasprintf(GFP_KERNEL, name, ap); } else { plane->name = kasprintf(GFP_KERNEL, "plane-%d", drm_num_planes(dev)); } if (!plane->name) { kfree(plane->format_types); kfree(plane->modifiers); drm_mode_object_unregister(dev, &plane->base); return -ENOMEM; } memcpy(plane->format_types, formats, format_count * sizeof(uint32_t)); plane->format_count = format_count; memcpy(plane->modifiers, format_modifiers, format_modifier_count * sizeof(format_modifiers[0])); plane->possible_crtcs = possible_crtcs; plane->type = type; list_add_tail(&plane->head, &config->plane_list); plane->index = config->num_total_plane++; drm_object_attach_property(&plane->base, config->plane_type_property, plane->type); if (drm_core_check_feature(dev, DRIVER_ATOMIC)) { drm_object_attach_property(&plane->base, config->prop_fb_id, 0); drm_object_attach_property(&plane->base, config->prop_in_fence_fd, -1); drm_object_attach_property(&plane->base, config->prop_crtc_id, 0); drm_object_attach_property(&plane->base, config->prop_crtc_x, 0); drm_object_attach_property(&plane->base, config->prop_crtc_y, 0); drm_object_attach_property(&plane->base, config->prop_crtc_w, 0); drm_object_attach_property(&plane->base, config->prop_crtc_h, 0); drm_object_attach_property(&plane->base, config->prop_src_x, 0); drm_object_attach_property(&plane->base, config->prop_src_y, 0); drm_object_attach_property(&plane->base, config->prop_src_w, 0); drm_object_attach_property(&plane->base, config->prop_src_h, 0); } if (config->allow_fb_modifiers) create_in_format_blob(dev, plane); return 0; } /** * drm_universal_plane_init - Initialize a new universal plane object * @dev: DRM device * @plane: plane object to init * @possible_crtcs: bitmask of possible CRTCs * @funcs: callbacks for the new plane * @formats: array of supported formats (DRM_FORMAT\_\*) * @format_count: number of elements in @formats * @format_modifiers: array of struct drm_format modifiers terminated by * DRM_FORMAT_MOD_INVALID * @type: type of plane (overlay, primary, cursor) * @name: printf style format string for the plane name, or NULL for default name * * Initializes a plane object of type @type. The &drm_plane_funcs.destroy hook * should call drm_plane_cleanup() and kfree() the plane structure. The plane * structure should not be allocated with devm_kzalloc(). * * Note: consider using drmm_universal_plane_alloc() instead of * drm_universal_plane_init() to let the DRM managed resource infrastructure * take care of cleanup and deallocation. * * Drivers supporting modifiers must set @format_modifiers on all their planes, * even those that only support DRM_FORMAT_MOD_LINEAR. * * Returns: * Zero on success, error code on failure. */ int drm_universal_plane_init(struct drm_device *dev, struct drm_plane *plane, uint32_t possible_crtcs, const struct drm_plane_funcs *funcs, const uint32_t *formats, unsigned int format_count, const uint64_t *format_modifiers, enum drm_plane_type type, const char *name, ...) { va_list ap; int ret; WARN_ON(!funcs->destroy); va_start(ap, name); ret = __drm_universal_plane_init(dev, plane, possible_crtcs, funcs, formats, format_count, format_modifiers, type, name, ap); va_end(ap); return ret; } EXPORT_SYMBOL(drm_universal_plane_init); static void drmm_universal_plane_alloc_release(struct drm_device *dev, void *ptr) { struct drm_plane *plane = ptr; if (WARN_ON(!plane->dev)) return; drm_plane_cleanup(plane); } void *__drmm_universal_plane_alloc(struct drm_device *dev, size_t size, size_t offset, uint32_t possible_crtcs, const struct drm_plane_funcs *funcs, const uint32_t *formats, unsigned int format_count, const uint64_t *format_modifiers, enum drm_plane_type type, const char *name, ...) { void *container; struct drm_plane *plane; va_list ap; int ret; if (WARN_ON(!funcs || funcs->destroy)) return ERR_PTR(-EINVAL); container = drmm_kzalloc(dev, size, GFP_KERNEL); if (!container) return ERR_PTR(-ENOMEM); plane = container + offset; va_start(ap, name); ret = __drm_universal_plane_init(dev, plane, possible_crtcs, funcs, formats, format_count, format_modifiers, type, name, ap); va_end(ap); if (ret) return ERR_PTR(ret); ret = drmm_add_action_or_reset(dev, drmm_universal_plane_alloc_release, plane); if (ret) return ERR_PTR(ret); return container; } EXPORT_SYMBOL(__drmm_universal_plane_alloc); int drm_plane_register_all(struct drm_device *dev) { unsigned int num_planes = 0; unsigned int num_zpos = 0; struct drm_plane *plane; int ret = 0; drm_for_each_plane(plane, dev) { if (plane->funcs->late_register) ret = plane->funcs->late_register(plane); if (ret) return ret; if (plane->zpos_property) num_zpos++; num_planes++; } drm_WARN(dev, num_zpos && num_planes != num_zpos, "Mixing planes with and without zpos property is invalid\n"); return 0; } void drm_plane_unregister_all(struct drm_device *dev) { struct drm_plane *plane; drm_for_each_plane(plane, dev) { if (plane->funcs->early_unregister) plane->funcs->early_unregister(plane); } } /** * drm_plane_init - Initialize a legacy plane * @dev: DRM device * @plane: plane object to init * @possible_crtcs: bitmask of possible CRTCs * @funcs: callbacks for the new plane * @formats: array of supported formats (DRM_FORMAT\_\*) * @format_count: number of elements in @formats * @is_primary: plane type (primary vs overlay) * * Legacy API to initialize a DRM plane. * * New drivers should call drm_universal_plane_init() instead. * * Returns: * Zero on success, error code on failure. */ int drm_plane_init(struct drm_device *dev, struct drm_plane *plane, uint32_t possible_crtcs, const struct drm_plane_funcs *funcs, const uint32_t *formats, unsigned int format_count, bool is_primary) { enum drm_plane_type type; type = is_primary ? DRM_PLANE_TYPE_PRIMARY : DRM_PLANE_TYPE_OVERLAY; return drm_universal_plane_init(dev, plane, possible_crtcs, funcs, formats, format_count, NULL, type, NULL); } EXPORT_SYMBOL(drm_plane_init); /** * drm_plane_cleanup - Clean up the core plane usage * @plane: plane to cleanup * * This function cleans up @plane and removes it from the DRM mode setting * core. Note that the function does *not* free the plane structure itself, * this is the responsibility of the caller. */ void drm_plane_cleanup(struct drm_plane *plane) { struct drm_device *dev = plane->dev; drm_modeset_lock_fini(&plane->mutex); kfree(plane->format_types); kfree(plane->modifiers); drm_mode_object_unregister(dev, &plane->base); BUG_ON(list_empty(&plane->head)); /* Note that the plane_list is considered to be static; should we * remove the drm_plane at runtime we would have to decrement all * the indices on the drm_plane after us in the plane_list. */ list_del(&plane->head); dev->mode_config.num_total_plane--; WARN_ON(plane->state && !plane->funcs->atomic_destroy_state); if (plane->state && plane->funcs->atomic_destroy_state) plane->funcs->atomic_destroy_state(plane, plane->state); kfree(plane->name); memset(plane, 0, sizeof(*plane)); } EXPORT_SYMBOL(drm_plane_cleanup); /** * drm_plane_from_index - find the registered plane at an index * @dev: DRM device * @idx: index of registered plane to find for * * Given a plane index, return the registered plane from DRM device's * list of planes with matching index. This is the inverse of drm_plane_index(). */ struct drm_plane * drm_plane_from_index(struct drm_device *dev, int idx) { struct drm_plane *plane; drm_for_each_plane(plane, dev) if (idx == plane->index) return plane; return NULL; } EXPORT_SYMBOL(drm_plane_from_index); /** * drm_plane_force_disable - Forcibly disable a plane * @plane: plane to disable * * Forces the plane to be disabled. * * Used when the plane's current framebuffer is destroyed, * and when restoring fbdev mode. * * Note that this function is not suitable for atomic drivers, since it doesn't * wire through the lock acquisition context properly and hence can't handle * retries or driver private locks. You probably want to use * drm_atomic_helper_disable_plane() or * drm_atomic_helper_disable_planes_on_crtc() instead. */ void drm_plane_force_disable(struct drm_plane *plane) { int ret; if (!plane->fb) return; WARN_ON(drm_drv_uses_atomic_modeset(plane->dev)); plane->old_fb = plane->fb; ret = plane->funcs->disable_plane(plane, NULL); if (ret) { DRM_ERROR("failed to disable plane with busy fb\n"); plane->old_fb = NULL; return; } /* disconnect the plane from the fb and crtc: */ drm_framebuffer_put(plane->old_fb); plane->old_fb = NULL; plane->fb = NULL; plane->crtc = NULL; } EXPORT_SYMBOL(drm_plane_force_disable); /** * drm_mode_plane_set_obj_prop - set the value of a property * @plane: drm plane object to set property value for * @property: property to set * @value: value the property should be set to * * This functions sets a given property on a given plane object. This function * calls the driver's ->set_property callback and changes the software state of * the property if the callback succeeds. * * Returns: * Zero on success, error code on failure. */ int drm_mode_plane_set_obj_prop(struct drm_plane *plane, struct drm_property *property, uint64_t value) { int ret = -EINVAL; struct drm_mode_object *obj = &plane->base; if (plane->funcs->set_property) ret = plane->funcs->set_property(plane, property, value); if (!ret) drm_object_property_set_value(obj, property, value); return ret; } EXPORT_SYMBOL(drm_mode_plane_set_obj_prop); int drm_mode_getplane_res(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_mode_get_plane_res *plane_resp = data; struct drm_plane *plane; uint32_t __user *plane_ptr; int count = 0; if (!drm_core_check_feature(dev, DRIVER_MODESET)) return -EOPNOTSUPP; plane_ptr = u64_to_user_ptr(plane_resp->plane_id_ptr); /* * This ioctl is called twice, once to determine how much space is * needed, and the 2nd time to fill it. */ drm_for_each_plane(plane, dev) { /* * Unless userspace set the 'universal planes' * capability bit, only advertise overlays. */ if (plane->type != DRM_PLANE_TYPE_OVERLAY && !file_priv->universal_planes) continue; if (drm_lease_held(file_priv, plane->base.id)) { if (count < plane_resp->count_planes && put_user(plane->base.id, plane_ptr + count)) return -EFAULT; count++; } } plane_resp->count_planes = count; return 0; } int drm_mode_getplane(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_mode_get_plane *plane_resp = data; struct drm_plane *plane; uint32_t __user *format_ptr; if (!drm_core_check_feature(dev, DRIVER_MODESET)) return -EOPNOTSUPP; plane = drm_plane_find(dev, file_priv, plane_resp->plane_id); if (!plane) return -ENOENT; drm_modeset_lock(&plane->mutex, NULL); if (plane->state && plane->state->crtc && drm_lease_held(file_priv, plane->state->crtc->base.id)) plane_resp->crtc_id = plane->state->crtc->base.id; else if (!plane->state && plane->crtc && drm_lease_held(file_priv, plane->crtc->base.id)) plane_resp->crtc_id = plane->crtc->base.id; else plane_resp->crtc_id = 0; if (plane->state && plane->state->fb) plane_resp->fb_id = plane->state->fb->base.id; else if (!plane->state && plane->fb) plane_resp->fb_id = plane->fb->base.id; else plane_resp->fb_id = 0; drm_modeset_unlock(&plane->mutex); plane_resp->plane_id = plane->base.id; plane_resp->possible_crtcs = drm_lease_filter_crtcs(file_priv, plane->possible_crtcs); plane_resp->gamma_size = 0; /* * This ioctl is called twice, once to determine how much space is * needed, and the 2nd time to fill it. */ if (plane->format_count && (plane_resp->count_format_types >= plane->format_count)) { format_ptr = (uint32_t __user *)(unsigned long)plane_resp->format_type_ptr; if (copy_to_user(format_ptr, plane->format_types, sizeof(uint32_t) * plane->format_count)) { return -EFAULT; } } plane_resp->count_format_types = plane->format_count; return 0; } int drm_plane_check_pixel_format(struct drm_plane *plane, u32 format, u64 modifier) { unsigned int i; for (i = 0; i < plane->format_count; i++) { if (format == plane->format_types[i]) break; } if (i == plane->format_count) return -EINVAL; if (plane->funcs->format_mod_supported) { if (!plane->funcs->format_mod_supported(plane, format, modifier)) return -EINVAL; } else { if (!plane->modifier_count) return 0; for (i = 0; i < plane->modifier_count; i++) { if (modifier == plane->modifiers[i]) break; } if (i == plane->modifier_count) return -EINVAL; } return 0; } static int __setplane_check(struct drm_plane *plane, struct drm_crtc *crtc, struct drm_framebuffer *fb, int32_t crtc_x, int32_t crtc_y, uint32_t crtc_w, uint32_t crtc_h, uint32_t src_x, uint32_t src_y, uint32_t src_w, uint32_t src_h) { int ret; /* Check whether this plane is usable on this CRTC */ if (!(plane->possible_crtcs & drm_crtc_mask(crtc))) { DRM_DEBUG_KMS("Invalid crtc for plane\n"); return -EINVAL; } /* Check whether this plane supports the fb pixel format. */ ret = drm_plane_check_pixel_format(plane, fb->format->format, fb->modifier); if (ret) { DRM_DEBUG_KMS("Invalid pixel format %p4cc, modifier 0x%llx\n", &fb->format->format, fb->modifier); return ret; } /* Give drivers some help against integer overflows */ if (crtc_w > INT_MAX || crtc_x > INT_MAX - (int32_t) crtc_w || crtc_h > INT_MAX || crtc_y > INT_MAX - (int32_t) crtc_h) { DRM_DEBUG_KMS("Invalid CRTC coordinates %ux%u+%d+%d\n", crtc_w, crtc_h, crtc_x, crtc_y); return -ERANGE; } ret = drm_framebuffer_check_src_coords(src_x, src_y, src_w, src_h, fb); if (ret) return ret; return 0; } /** * drm_any_plane_has_format - Check whether any plane supports this format and modifier combination * @dev: DRM device * @format: pixel format (DRM_FORMAT_*) * @modifier: data layout modifier * * Returns: * Whether at least one plane supports the specified format and modifier combination. */ bool drm_any_plane_has_format(struct drm_device *dev, u32 format, u64 modifier) { struct drm_plane *plane; drm_for_each_plane(plane, dev) { if (drm_plane_check_pixel_format(plane, format, modifier) == 0) return true; } return false; } EXPORT_SYMBOL(drm_any_plane_has_format); /* * __setplane_internal - setplane handler for internal callers * * This function will take a reference on the new fb for the plane * on success. * * src_{x,y,w,h} are provided in 16.16 fixed point format */ static int __setplane_internal(struct drm_plane *plane, struct drm_crtc *crtc, struct drm_framebuffer *fb, int32_t crtc_x, int32_t crtc_y, uint32_t crtc_w, uint32_t crtc_h, /* src_{x,y,w,h} values are 16.16 fixed point */ uint32_t src_x, uint32_t src_y, uint32_t src_w, uint32_t src_h, struct drm_modeset_acquire_ctx *ctx) { int ret = 0; WARN_ON(drm_drv_uses_atomic_modeset(plane->dev)); /* No fb means shut it down */ if (!fb) { plane->old_fb = plane->fb; ret = plane->funcs->disable_plane(plane, ctx); if (!ret) { plane->crtc = NULL; plane->fb = NULL; } else { plane->old_fb = NULL; } goto out; } ret = __setplane_check(plane, crtc, fb, crtc_x, crtc_y, crtc_w, crtc_h, src_x, src_y, src_w, src_h); if (ret) goto out; plane->old_fb = plane->fb; ret = plane->funcs->update_plane(plane, crtc, fb, crtc_x, crtc_y, crtc_w, crtc_h, src_x, src_y, src_w, src_h, ctx); if (!ret) { plane->crtc = crtc; plane->fb = fb; drm_framebuffer_get(plane->fb); } else { plane->old_fb = NULL; } out: if (plane->old_fb) drm_framebuffer_put(plane->old_fb); plane->old_fb = NULL; return ret; } static int __setplane_atomic(struct drm_plane *plane, struct drm_crtc *crtc, struct drm_framebuffer *fb, int32_t crtc_x, int32_t crtc_y, uint32_t crtc_w, uint32_t crtc_h, uint32_t src_x, uint32_t src_y, uint32_t src_w, uint32_t src_h, struct drm_modeset_acquire_ctx *ctx) { int ret; WARN_ON(!drm_drv_uses_atomic_modeset(plane->dev)); /* No fb means shut it down */ if (!fb) return plane->funcs->disable_plane(plane, ctx); /* * FIXME: This is redundant with drm_atomic_plane_check(), * but the legacy cursor/"async" .update_plane() tricks * don't call that so we still need this here. Should remove * this when all .update_plane() implementations have been * fixed to call drm_atomic_plane_check(). */ ret = __setplane_check(plane, crtc, fb, crtc_x, crtc_y, crtc_w, crtc_h, src_x, src_y, src_w, src_h); if (ret) return ret; return plane->funcs->update_plane(plane, crtc, fb, crtc_x, crtc_y, crtc_w, crtc_h, src_x, src_y, src_w, src_h, ctx); } static int setplane_internal(struct drm_plane *plane, struct drm_crtc *crtc, struct drm_framebuffer *fb, int32_t crtc_x, int32_t crtc_y, uint32_t crtc_w, uint32_t crtc_h, /* src_{x,y,w,h} values are 16.16 fixed point */ uint32_t src_x, uint32_t src_y, uint32_t src_w, uint32_t src_h) { struct drm_modeset_acquire_ctx ctx; int ret; DRM_MODESET_LOCK_ALL_BEGIN(plane->dev, ctx, DRM_MODESET_ACQUIRE_INTERRUPTIBLE, ret); if (drm_drv_uses_atomic_modeset(plane->dev)) ret = __setplane_atomic(plane, crtc, fb, crtc_x, crtc_y, crtc_w, crtc_h, src_x, src_y, src_w, src_h, &ctx); else ret = __setplane_internal(plane, crtc, fb, crtc_x, crtc_y, crtc_w, crtc_h, src_x, src_y, src_w, src_h, &ctx); DRM_MODESET_LOCK_ALL_END(plane->dev, ctx, ret); return ret; } int drm_mode_setplane(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_mode_set_plane *plane_req = data; struct drm_plane *plane; struct drm_crtc *crtc = NULL; struct drm_framebuffer *fb = NULL; int ret; if (!drm_core_check_feature(dev, DRIVER_MODESET)) return -EOPNOTSUPP; /* * First, find the plane, crtc, and fb objects. If not available, * we don't bother to call the driver. */ plane = drm_plane_find(dev, file_priv, plane_req->plane_id); if (!plane) { DRM_DEBUG_KMS("Unknown plane ID %d\n", plane_req->plane_id); return -ENOENT; } if (plane_req->fb_id) { fb = drm_framebuffer_lookup(dev, file_priv, plane_req->fb_id); if (!fb) { DRM_DEBUG_KMS("Unknown framebuffer ID %d\n", plane_req->fb_id); return -ENOENT; } crtc = drm_crtc_find(dev, file_priv, plane_req->crtc_id); if (!crtc) { drm_framebuffer_put(fb); DRM_DEBUG_KMS("Unknown crtc ID %d\n", plane_req->crtc_id); return -ENOENT; } } ret = setplane_internal(plane, crtc, fb, plane_req->crtc_x, plane_req->crtc_y, plane_req->crtc_w, plane_req->crtc_h, plane_req->src_x, plane_req->src_y, plane_req->src_w, plane_req->src_h); if (fb) drm_framebuffer_put(fb); return ret; } static int drm_mode_cursor_universal(struct drm_crtc *crtc, struct drm_mode_cursor2 *req, struct drm_file *file_priv, struct drm_modeset_acquire_ctx *ctx) { struct drm_device *dev = crtc->dev; struct drm_plane *plane = crtc->cursor; struct drm_framebuffer *fb = NULL; struct drm_mode_fb_cmd2 fbreq = { .width = req->width, .height = req->height, .pixel_format = DRM_FORMAT_ARGB8888, .pitches = { req->width * 4 }, .handles = { req->handle }, }; int32_t crtc_x, crtc_y; uint32_t crtc_w = 0, crtc_h = 0; uint32_t src_w = 0, src_h = 0; int ret = 0; BUG_ON(!plane); WARN_ON(plane->crtc != crtc && plane->crtc != NULL); /* * Obtain fb we'll be using (either new or existing) and take an extra * reference to it if fb != null. setplane will take care of dropping * the reference if the plane update fails. */ if (req->flags & DRM_MODE_CURSOR_BO) { if (req->handle) { fb = drm_internal_framebuffer_create(dev, &fbreq, file_priv); if (IS_ERR(fb)) { DRM_DEBUG_KMS("failed to wrap cursor buffer in drm framebuffer\n"); return PTR_ERR(fb); } fb->hot_x = req->hot_x; fb->hot_y = req->hot_y; } else { fb = NULL; } } else { if (plane->state) fb = plane->state->fb; else fb = plane->fb; if (fb) drm_framebuffer_get(fb); } if (req->flags & DRM_MODE_CURSOR_MOVE) { crtc_x = req->x; crtc_y = req->y; } else { crtc_x = crtc->cursor_x; crtc_y = crtc->cursor_y; } if (fb) { crtc_w = fb->width; crtc_h = fb->height; src_w = fb->width << 16; src_h = fb->height << 16; } if (drm_drv_uses_atomic_modeset(dev)) ret = __setplane_atomic(plane, crtc, fb, crtc_x, crtc_y, crtc_w, crtc_h, 0, 0, src_w, src_h, ctx); else ret = __setplane_internal(plane, crtc, fb, crtc_x, crtc_y, crtc_w, crtc_h, 0, 0, src_w, src_h, ctx); if (fb) drm_framebuffer_put(fb); /* Update successful; save new cursor position, if necessary */ if (ret == 0 && req->flags & DRM_MODE_CURSOR_MOVE) { crtc->cursor_x = req->x; crtc->cursor_y = req->y; } return ret; } static int drm_mode_cursor_common(struct drm_device *dev, struct drm_mode_cursor2 *req, struct drm_file *file_priv) { struct drm_crtc *crtc; struct drm_modeset_acquire_ctx ctx; int ret = 0; if (!drm_core_check_feature(dev, DRIVER_MODESET)) return -EOPNOTSUPP; if (!req->flags || (~DRM_MODE_CURSOR_FLAGS & req->flags)) return -EINVAL; crtc = drm_crtc_find(dev, file_priv, req->crtc_id); if (!crtc) { DRM_DEBUG_KMS("Unknown CRTC ID %d\n", req->crtc_id); return -ENOENT; } drm_modeset_acquire_init(&ctx, DRM_MODESET_ACQUIRE_INTERRUPTIBLE); retry: ret = drm_modeset_lock(&crtc->mutex, &ctx); if (ret) goto out; /* * If this crtc has a universal cursor plane, call that plane's update * handler rather than using legacy cursor handlers. */ if (crtc->cursor) { ret = drm_modeset_lock(&crtc->cursor->mutex, &ctx); if (ret) goto out; if (!drm_lease_held(file_priv, crtc->cursor->base.id)) { ret = -EACCES; goto out; } ret = drm_mode_cursor_universal(crtc, req, file_priv, &ctx); goto out; } if (req->flags & DRM_MODE_CURSOR_BO) { if (!crtc->funcs->cursor_set && !crtc->funcs->cursor_set2) { ret = -ENXIO; goto out; } /* Turns off the cursor if handle is 0 */ if (crtc->funcs->cursor_set2) ret = crtc->funcs->cursor_set2(crtc, file_priv, req->handle, req->width, req->height, req->hot_x, req->hot_y); else ret = crtc->funcs->cursor_set(crtc, file_priv, req->handle, req->width, req->height); } if (req->flags & DRM_MODE_CURSOR_MOVE) { if (crtc->funcs->cursor_move) { ret = crtc->funcs->cursor_move(crtc, req->x, req->y); } else { ret = -EFAULT; goto out; } } out: if (ret == -EDEADLK) { ret = drm_modeset_backoff(&ctx); if (!ret) goto retry; } drm_modeset_drop_locks(&ctx); drm_modeset_acquire_fini(&ctx); return ret; } int drm_mode_cursor_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_mode_cursor *req = data; struct drm_mode_cursor2 new_req; memcpy(&new_req, req, sizeof(struct drm_mode_cursor)); new_req.hot_x = new_req.hot_y = 0; return drm_mode_cursor_common(dev, &new_req, file_priv); } /* * Set the cursor configuration based on user request. This implements the 2nd * version of the cursor ioctl, which allows userspace to additionally specify * the hotspot of the pointer. */ int drm_mode_cursor2_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_mode_cursor2 *req = data; return drm_mode_cursor_common(dev, req, file_priv); } int drm_mode_page_flip_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_mode_crtc_page_flip_target *page_flip = data; struct drm_crtc *crtc; struct drm_plane *plane; struct drm_framebuffer *fb = NULL, *old_fb; struct drm_pending_vblank_event *e = NULL; u32 target_vblank = page_flip->sequence; struct drm_modeset_acquire_ctx ctx; int ret = -EINVAL; if (!drm_core_check_feature(dev, DRIVER_MODESET)) return -EOPNOTSUPP; if (page_flip->flags & ~DRM_MODE_PAGE_FLIP_FLAGS) return -EINVAL; if (page_flip->sequence != 0 && !(page_flip->flags & DRM_MODE_PAGE_FLIP_TARGET)) return -EINVAL; /* Only one of the DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE/RELATIVE flags * can be specified */ if ((page_flip->flags & DRM_MODE_PAGE_FLIP_TARGET) == DRM_MODE_PAGE_FLIP_TARGET) return -EINVAL; if ((page_flip->flags & DRM_MODE_PAGE_FLIP_ASYNC) && !dev->mode_config.async_page_flip) return -EINVAL; crtc = drm_crtc_find(dev, file_priv, page_flip->crtc_id); if (!crtc) return -ENOENT; plane = crtc->primary; if (!drm_lease_held(file_priv, plane->base.id)) return -EACCES; if (crtc->funcs->page_flip_target) { u32 current_vblank; int r; r = drm_crtc_vblank_get(crtc); if (r) return r; current_vblank = (u32)drm_crtc_vblank_count(crtc); switch (page_flip->flags & DRM_MODE_PAGE_FLIP_TARGET) { case DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE: if ((int)(target_vblank - current_vblank) > 1) { DRM_DEBUG("Invalid absolute flip target %u, " "must be <= %u\n", target_vblank, current_vblank + 1); drm_crtc_vblank_put(crtc); return -EINVAL; } break; case DRM_MODE_PAGE_FLIP_TARGET_RELATIVE: if (target_vblank != 0 && target_vblank != 1) { DRM_DEBUG("Invalid relative flip target %u, " "must be 0 or 1\n", target_vblank); drm_crtc_vblank_put(crtc); return -EINVAL; } target_vblank += current_vblank; break; default: target_vblank = current_vblank + !(page_flip->flags & DRM_MODE_PAGE_FLIP_ASYNC); break; } } else if (crtc->funcs->page_flip == NULL || (page_flip->flags & DRM_MODE_PAGE_FLIP_TARGET)) { return -EINVAL; } drm_modeset_acquire_init(&ctx, DRM_MODESET_ACQUIRE_INTERRUPTIBLE); retry: ret = drm_modeset_lock(&crtc->mutex, &ctx); if (ret) goto out; ret = drm_modeset_lock(&plane->mutex, &ctx); if (ret) goto out; if (plane->state) old_fb = plane->state->fb; else old_fb = plane->fb; if (old_fb == NULL) { /* The framebuffer is currently unbound, presumably * due to a hotplug event, that userspace has not * yet discovered. */ ret = -EBUSY; goto out; } fb = drm_framebuffer_lookup(dev, file_priv, page_flip->fb_id); if (!fb) { ret = -ENOENT; goto out; } if (plane->state) { const struct drm_plane_state *state = plane->state; ret = drm_framebuffer_check_src_coords(state->src_x, state->src_y, state->src_w, state->src_h, fb); } else { ret = drm_crtc_check_viewport(crtc, crtc->x, crtc->y, &crtc->mode, fb); } if (ret) goto out; /* * Only check the FOURCC format code, excluding modifiers. This is * enough for all legacy drivers. Atomic drivers have their own * checks in their ->atomic_check implementation, which will * return -EINVAL if any hw or driver constraint is violated due * to modifier changes. */ if (old_fb->format->format != fb->format->format) { DRM_DEBUG_KMS("Page flip is not allowed to change frame buffer format.\n"); ret = -EINVAL; goto out; } if (page_flip->flags & DRM_MODE_PAGE_FLIP_EVENT) { e = kzalloc(sizeof *e, GFP_KERNEL); if (!e) { ret = -ENOMEM; goto out; } e->event.base.type = DRM_EVENT_FLIP_COMPLETE; e->event.base.length = sizeof(e->event); e->event.vbl.user_data = page_flip->user_data; e->event.vbl.crtc_id = crtc->base.id; ret = drm_event_reserve_init(dev, file_priv, &e->base, &e->event.base); if (ret) { kfree(e); e = NULL; goto out; } } plane->old_fb = plane->fb; if (crtc->funcs->page_flip_target) ret = crtc->funcs->page_flip_target(crtc, fb, e, page_flip->flags, target_vblank, &ctx); else ret = crtc->funcs->page_flip(crtc, fb, e, page_flip->flags, &ctx); if (ret) { if (page_flip->flags & DRM_MODE_PAGE_FLIP_EVENT) drm_event_cancel_free(dev, &e->base); /* Keep the old fb, don't unref it. */ plane->old_fb = NULL; } else { if (!plane->state) { plane->fb = fb; drm_framebuffer_get(fb); } } out: if (fb) drm_framebuffer_put(fb); fb = NULL; if (plane->old_fb) drm_framebuffer_put(plane->old_fb); plane->old_fb = NULL; if (ret == -EDEADLK) { ret = drm_modeset_backoff(&ctx); if (!ret) goto retry; } drm_modeset_drop_locks(&ctx); drm_modeset_acquire_fini(&ctx); if (ret && crtc->funcs->page_flip_target) drm_crtc_vblank_put(crtc); return ret; } /** * DOC: damage tracking * * FB_DAMAGE_CLIPS is an optional plane property which provides a means to * specify a list of damage rectangles on a plane in framebuffer coordinates of * the framebuffer attached to the plane. In current context damage is the area * of plane framebuffer that has changed since last plane update (also called * page-flip), irrespective of whether currently attached framebuffer is same as * framebuffer attached during last plane update or not. * * FB_DAMAGE_CLIPS is a hint to kernel which could be helpful for some drivers * to optimize internally especially for virtual devices where each framebuffer * change needs to be transmitted over network, usb, etc. * * Since FB_DAMAGE_CLIPS is a hint so it is an optional property. User-space can * ignore damage clips property and in that case driver will do a full plane * update. In case damage clips are provided then it is guaranteed that the area * inside damage clips will be updated to plane. For efficiency driver can do * full update or can update more than specified in damage clips. Since driver * is free to read more, user-space must always render the entire visible * framebuffer. Otherwise there can be corruptions. Also, if a user-space * provides damage clips which doesn't encompass the actual damage to * framebuffer (since last plane update) can result in incorrect rendering. * * FB_DAMAGE_CLIPS is a blob property with the layout of blob data is simply an * array of &drm_mode_rect. Unlike plane &drm_plane_state.src coordinates, * damage clips are not in 16.16 fixed point. Similar to plane src in * framebuffer, damage clips cannot be negative. In damage clip, x1/y1 are * inclusive and x2/y2 are exclusive. While kernel does not error for overlapped * damage clips, it is strongly discouraged. * * Drivers that are interested in damage interface for plane should enable * FB_DAMAGE_CLIPS property by calling drm_plane_enable_fb_damage_clips(). * Drivers implementing damage can use drm_atomic_helper_damage_iter_init() and * drm_atomic_helper_damage_iter_next() helper iterator function to get damage * rectangles clipped to &drm_plane_state.src. */ /** * drm_plane_enable_fb_damage_clips - Enables plane fb damage clips property. * @plane: Plane on which to enable damage clips property. * * This function lets driver to enable the damage clips property on a plane. */ void drm_plane_enable_fb_damage_clips(struct drm_plane *plane) { struct drm_device *dev = plane->dev; struct drm_mode_config *config = &dev->mode_config; drm_object_attach_property(&plane->base, config->prop_fb_damage_clips, 0); } EXPORT_SYMBOL(drm_plane_enable_fb_damage_clips); /** * drm_plane_get_damage_clips_count - Returns damage clips count. * @state: Plane state. * * Simple helper to get the number of &drm_mode_rect clips set by user-space * during plane update. * * Return: Number of clips in plane fb_damage_clips blob property. */ unsigned int drm_plane_get_damage_clips_count(const struct drm_plane_state *state) { return (state && state->fb_damage_clips) ? state->fb_damage_clips->length/sizeof(struct drm_mode_rect) : 0; } EXPORT_SYMBOL(drm_plane_get_damage_clips_count); struct drm_mode_rect * __drm_plane_get_damage_clips(const struct drm_plane_state *state) { return (struct drm_mode_rect *)((state && state->fb_damage_clips) ? state->fb_damage_clips->data : NULL); } /** * drm_plane_get_damage_clips - Returns damage clips. * @state: Plane state. * * Note that this function returns uapi type &drm_mode_rect. Drivers might want * to use the helper functions drm_atomic_helper_damage_iter_init() and * drm_atomic_helper_damage_iter_next() or drm_atomic_helper_damage_merged() if * the driver can only handle a single damage region at most. * * Return: Damage clips in plane fb_damage_clips blob property. */ struct drm_mode_rect * drm_plane_get_damage_clips(const struct drm_plane_state *state) { struct drm_device *dev = state->plane->dev; struct drm_mode_config *config = &dev->mode_config; /* check that drm_plane_enable_fb_damage_clips() was called */ if (!drm_mode_obj_find_prop_id(&state->plane->base, config->prop_fb_damage_clips->base.id)) drm_warn_once(dev, "drm_plane_enable_fb_damage_clips() not called\n"); return __drm_plane_get_damage_clips(state); } EXPORT_SYMBOL(drm_plane_get_damage_clips); struct drm_property * drm_create_scaling_filter_prop(struct drm_device *dev, unsigned int supported_filters) { struct drm_property *prop; static const struct drm_prop_enum_list props[] = { { DRM_SCALING_FILTER_DEFAULT, "Default" }, { DRM_SCALING_FILTER_NEAREST_NEIGHBOR, "Nearest Neighbor" }, }; unsigned int valid_mode_mask = BIT(DRM_SCALING_FILTER_DEFAULT) | BIT(DRM_SCALING_FILTER_NEAREST_NEIGHBOR); int i; if (WARN_ON((supported_filters & ~valid_mode_mask) || ((supported_filters & BIT(DRM_SCALING_FILTER_DEFAULT)) == 0))) return ERR_PTR(-EINVAL); prop = drm_property_create(dev, DRM_MODE_PROP_ENUM, "SCALING_FILTER", hweight32(supported_filters)); if (!prop) return ERR_PTR(-ENOMEM); for (i = 0; i < ARRAY_SIZE(props); i++) { int ret; if (!(BIT(props[i].type) & supported_filters)) continue; ret = drm_property_add_enum(prop, props[i].type, props[i].name); if (ret) { drm_property_destroy(dev, prop); return ERR_PTR(ret); } } return prop; } /** * drm_plane_create_scaling_filter_property - create a new scaling filter * property * * @plane: drm plane * @supported_filters: bitmask of supported scaling filters, must include * BIT(DRM_SCALING_FILTER_DEFAULT). * * This function lets driver to enable the scaling filter property on a given * plane. * * RETURNS: * Zero for success or -errno */ int drm_plane_create_scaling_filter_property(struct drm_plane *plane, unsigned int supported_filters) { struct drm_property *prop = drm_create_scaling_filter_prop(plane->dev, supported_filters); if (IS_ERR(prop)) return PTR_ERR(prop); drm_object_attach_property(&plane->base, prop, DRM_SCALING_FILTER_DEFAULT); plane->scaling_filter_property = prop; return 0; } EXPORT_SYMBOL(drm_plane_create_scaling_filter_property);