/* SPDX-License-Identifier: GPL-2.0 */ /* Copyright (c) 2018 Intel Corporation */ #ifndef _IGC_DEFINES_H_ #define _IGC_DEFINES_H_ /* Number of Transmit and Receive Descriptors must be a multiple of 8 */ #define REQ_TX_DESCRIPTOR_MULTIPLE 8 #define REQ_RX_DESCRIPTOR_MULTIPLE 8 #define IGC_CTRL_EXT_SDP2_DIR 0x00000400 /* SDP2 Data direction */ #define IGC_CTRL_EXT_SDP3_DIR 0x00000800 /* SDP3 Data direction */ #define IGC_CTRL_EXT_DRV_LOAD 0x10000000 /* Drv loaded bit for FW */ /* Definitions for power management and wakeup registers */ /* Wake Up Control */ #define IGC_WUC_PME_EN 0x00000002 /* PME Enable */ /* Wake Up Filter Control */ #define IGC_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */ #define IGC_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */ #define IGC_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */ #define IGC_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */ #define IGC_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */ #define IGC_WUFC_FLEX_HQ BIT(14) /* Flex Filters Host Queuing */ #define IGC_WUFC_FLX0 BIT(16) /* Flexible Filter 0 Enable */ #define IGC_WUFC_FLX1 BIT(17) /* Flexible Filter 1 Enable */ #define IGC_WUFC_FLX2 BIT(18) /* Flexible Filter 2 Enable */ #define IGC_WUFC_FLX3 BIT(19) /* Flexible Filter 3 Enable */ #define IGC_WUFC_FLX4 BIT(20) /* Flexible Filter 4 Enable */ #define IGC_WUFC_FLX5 BIT(21) /* Flexible Filter 5 Enable */ #define IGC_WUFC_FLX6 BIT(22) /* Flexible Filter 6 Enable */ #define IGC_WUFC_FLX7 BIT(23) /* Flexible Filter 7 Enable */ #define IGC_WUFC_FILTER_MASK GENMASK(23, 14) #define IGC_CTRL_ADVD3WUC 0x00100000 /* D3 WUC */ /* Wake Up Status */ #define IGC_WUS_EX 0x00000004 /* Directed Exact */ #define IGC_WUS_ARPD 0x00000020 /* Directed ARP Request */ #define IGC_WUS_IPV4 0x00000040 /* Directed IPv4 */ #define IGC_WUS_IPV6 0x00000080 /* Directed IPv6 */ #define IGC_WUS_NSD 0x00000400 /* Directed IPv6 Neighbor Solicitation */ /* Packet types that are enabled for wake packet delivery */ #define WAKE_PKT_WUS ( \ IGC_WUS_EX | \ IGC_WUS_ARPD | \ IGC_WUS_IPV4 | \ IGC_WUS_IPV6 | \ IGC_WUS_NSD) /* Wake Up Packet Length */ #define IGC_WUPL_MASK 0x00000FFF /* Wake Up Packet Memory stores the first 128 bytes of the wake up packet */ #define IGC_WUPM_BYTES 128 /* Wakeup Filter Control Extended */ #define IGC_WUFC_EXT_FLX8 BIT(8) /* Flexible Filter 8 Enable */ #define IGC_WUFC_EXT_FLX9 BIT(9) /* Flexible Filter 9 Enable */ #define IGC_WUFC_EXT_FLX10 BIT(10) /* Flexible Filter 10 Enable */ #define IGC_WUFC_EXT_FLX11 BIT(11) /* Flexible Filter 11 Enable */ #define IGC_WUFC_EXT_FLX12 BIT(12) /* Flexible Filter 12 Enable */ #define IGC_WUFC_EXT_FLX13 BIT(13) /* Flexible Filter 13 Enable */ #define IGC_WUFC_EXT_FLX14 BIT(14) /* Flexible Filter 14 Enable */ #define IGC_WUFC_EXT_FLX15 BIT(15) /* Flexible Filter 15 Enable */ #define IGC_WUFC_EXT_FLX16 BIT(16) /* Flexible Filter 16 Enable */ #define IGC_WUFC_EXT_FLX17 BIT(17) /* Flexible Filter 17 Enable */ #define IGC_WUFC_EXT_FLX18 BIT(18) /* Flexible Filter 18 Enable */ #define IGC_WUFC_EXT_FLX19 BIT(19) /* Flexible Filter 19 Enable */ #define IGC_WUFC_EXT_FLX20 BIT(20) /* Flexible Filter 20 Enable */ #define IGC_WUFC_EXT_FLX21 BIT(21) /* Flexible Filter 21 Enable */ #define IGC_WUFC_EXT_FLX22 BIT(22) /* Flexible Filter 22 Enable */ #define IGC_WUFC_EXT_FLX23 BIT(23) /* Flexible Filter 23 Enable */ #define IGC_WUFC_EXT_FLX24 BIT(24) /* Flexible Filter 24 Enable */ #define IGC_WUFC_EXT_FLX25 BIT(25) /* Flexible Filter 25 Enable */ #define IGC_WUFC_EXT_FLX26 BIT(26) /* Flexible Filter 26 Enable */ #define IGC_WUFC_EXT_FLX27 BIT(27) /* Flexible Filter 27 Enable */ #define IGC_WUFC_EXT_FLX28 BIT(28) /* Flexible Filter 28 Enable */ #define IGC_WUFC_EXT_FLX29 BIT(29) /* Flexible Filter 29 Enable */ #define IGC_WUFC_EXT_FLX30 BIT(30) /* Flexible Filter 30 Enable */ #define IGC_WUFC_EXT_FLX31 BIT(31) /* Flexible Filter 31 Enable */ #define IGC_WUFC_EXT_FILTER_MASK GENMASK(31, 8) /* Physical Func Reset Done Indication */ #define IGC_CTRL_EXT_LINK_MODE_MASK 0x00C00000 /* Loop limit on how long we wait for auto-negotiation to complete */ #define COPPER_LINK_UP_LIMIT 10 #define PHY_AUTO_NEG_LIMIT 45 /* Number of 100 microseconds we wait for PCI Express master disable */ #define MASTER_DISABLE_TIMEOUT 800 /*Blocks new Master requests */ #define IGC_CTRL_GIO_MASTER_DISABLE 0x00000004 /* Status of Master requests. */ #define IGC_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Receive Address * Number of high/low register pairs in the RAR. The RAR (Receive Address * Registers) holds the directed and multicast addresses that we monitor. * Technically, we have 16 spots. However, we reserve one of these spots * (RAR[15]) for our directed address used by controllers with * manageability enabled, allowing us room for 15 multicast addresses. */ #define IGC_RAH_RAH_MASK 0x0000FFFF #define IGC_RAH_ASEL_MASK 0x00030000 #define IGC_RAH_ASEL_SRC_ADDR BIT(16) #define IGC_RAH_QSEL_MASK 0x000C0000 #define IGC_RAH_QSEL_SHIFT 18 #define IGC_RAH_QSEL_ENABLE BIT(28) #define IGC_RAH_AV 0x80000000 /* Receive descriptor valid */ #define IGC_RAL_MAC_ADDR_LEN 4 #define IGC_RAH_MAC_ADDR_LEN 2 /* Error Codes */ #define IGC_SUCCESS 0 #define IGC_ERR_NVM 1 #define IGC_ERR_PHY 2 #define IGC_ERR_CONFIG 3 #define IGC_ERR_PARAM 4 #define IGC_ERR_MAC_INIT 5 #define IGC_ERR_RESET 9 #define IGC_ERR_MASTER_REQUESTS_PENDING 10 #define IGC_ERR_BLK_PHY_RESET 12 #define IGC_ERR_SWFW_SYNC 13 /* Device Control */ #define IGC_CTRL_DEV_RST 0x20000000 /* Device reset */ #define IGC_CTRL_PHY_RST 0x80000000 /* PHY Reset */ #define IGC_CTRL_SLU 0x00000040 /* Set link up (Force Link) */ #define IGC_CTRL_FRCSPD 0x00000800 /* Force Speed */ #define IGC_CTRL_FRCDPX 0x00001000 /* Force Duplex */ #define IGC_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */ #define IGC_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */ #define IGC_CTRL_TFCE 0x10000000 /* Transmit flow control enable */ #define IGC_CTRL_SDP0_DIR 0x00400000 /* SDP0 Data direction */ #define IGC_CTRL_SDP1_DIR 0x00800000 /* SDP1 Data direction */ /* As per the EAS the maximum supported size is 9.5KB (9728 bytes) */ #define MAX_JUMBO_FRAME_SIZE 0x2600 /* PBA constants */ #define IGC_PBA_34K 0x0022 /* SW Semaphore Register */ #define IGC_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */ #define IGC_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */ /* SWFW_SYNC Definitions */ #define IGC_SWFW_EEP_SM 0x1 #define IGC_SWFW_PHY0_SM 0x2 /* Autoneg Advertisement Register */ #define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */ #define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */ #define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */ #define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */ #define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */ #define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */ /* Link Partner Ability Register (Base Page) */ #define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */ #define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */ /* 1000BASE-T Control Register */ #define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */ #define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */ /* 1000BASE-T Status Register */ #define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */ /* PHY GPY 211 registers */ #define STANDARD_AN_REG_MASK 0x0007 /* MMD */ #define ANEG_MULTIGBT_AN_CTRL 0x0020 /* MULTI GBT AN Control Register */ #define MMD_DEVADDR_SHIFT 16 /* Shift MMD to higher bits */ #define CR_2500T_FD_CAPS 0x0080 /* Advertise 2500T FD capability */ /* NVM Control */ /* Number of milliseconds for NVM auto read done after MAC reset. */ #define AUTO_READ_DONE_TIMEOUT 10 #define IGC_EECD_AUTO_RD 0x00000200 /* NVM Auto Read done */ #define IGC_EECD_REQ 0x00000040 /* NVM Access Request */ #define IGC_EECD_GNT 0x00000080 /* NVM Access Grant */ /* NVM Addressing bits based on type 0=small, 1=large */ #define IGC_EECD_ADDR_BITS 0x00000400 #define IGC_NVM_GRANT_ATTEMPTS 1000 /* NVM # attempts to gain grant */ #define IGC_EECD_SIZE_EX_MASK 0x00007800 /* NVM Size */ #define IGC_EECD_SIZE_EX_SHIFT 11 #define IGC_EECD_FLUPD_I225 0x00800000 /* Update FLASH */ #define IGC_EECD_FLUDONE_I225 0x04000000 /* Update FLASH done*/ #define IGC_EECD_FLASH_DETECTED_I225 0x00080000 /* FLASH detected */ #define IGC_FLUDONE_ATTEMPTS 20000 #define IGC_EERD_EEWR_MAX_COUNT 512 /* buffered EEPROM words rw */ /* Offset to data in NVM read/write registers */ #define IGC_NVM_RW_REG_DATA 16 #define IGC_NVM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */ #define IGC_NVM_RW_REG_START 1 /* Start operation */ #define IGC_NVM_RW_ADDR_SHIFT 2 /* Shift to the address bits */ #define IGC_NVM_POLL_READ 0 /* Flag for polling for read complete */ #define IGC_NVM_DEV_STARTER 5 /* Dev_starter Version */ /* NVM Word Offsets */ #define NVM_CHECKSUM_REG 0x003F /* For checksumming, the sum of all words in the NVM should equal 0xBABA. */ #define NVM_SUM 0xBABA #define NVM_WORD_SIZE_BASE_SHIFT 6 /* Collision related configuration parameters */ #define IGC_COLLISION_THRESHOLD 15 #define IGC_CT_SHIFT 4 #define IGC_COLLISION_DISTANCE 63 #define IGC_COLD_SHIFT 12 /* Device Status */ #define IGC_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */ #define IGC_STATUS_LU 0x00000002 /* Link up.0=no,1=link */ #define IGC_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */ #define IGC_STATUS_FUNC_SHIFT 2 #define IGC_STATUS_TXOFF 0x00000010 /* transmission paused */ #define IGC_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */ #define IGC_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */ #define IGC_STATUS_SPEED_2500 0x00400000 /* Speed 2.5Gb/s */ #define SPEED_10 10 #define SPEED_100 100 #define SPEED_1000 1000 #define SPEED_2500 2500 #define HALF_DUPLEX 1 #define FULL_DUPLEX 2 /* 1Gbps and 2.5Gbps half duplex is not supported, nor spec-compliant. */ #define ADVERTISE_10_HALF 0x0001 #define ADVERTISE_10_FULL 0x0002 #define ADVERTISE_100_HALF 0x0004 #define ADVERTISE_100_FULL 0x0008 #define ADVERTISE_1000_HALF 0x0010 /* Not used, just FYI */ #define ADVERTISE_1000_FULL 0x0020 #define ADVERTISE_2500_HALF 0x0040 /* Not used, just FYI */ #define ADVERTISE_2500_FULL 0x0080 #define IGC_ALL_SPEED_DUPLEX_2500 ( \ ADVERTISE_10_HALF | ADVERTISE_10_FULL | ADVERTISE_100_HALF | \ ADVERTISE_100_FULL | ADVERTISE_1000_FULL | ADVERTISE_2500_FULL) #define AUTONEG_ADVERTISE_SPEED_DEFAULT_2500 IGC_ALL_SPEED_DUPLEX_2500 /* Interrupt Cause Read */ #define IGC_ICR_TXDW BIT(0) /* Transmit desc written back */ #define IGC_ICR_TXQE BIT(1) /* Transmit Queue empty */ #define IGC_ICR_LSC BIT(2) /* Link Status Change */ #define IGC_ICR_RXSEQ BIT(3) /* Rx sequence error */ #define IGC_ICR_RXDMT0 BIT(4) /* Rx desc min. threshold (0) */ #define IGC_ICR_RXO BIT(6) /* Rx overrun */ #define IGC_ICR_RXT0 BIT(7) /* Rx timer intr (ring 0) */ #define IGC_ICR_TS BIT(19) /* Time Sync Interrupt */ #define IGC_ICR_DRSTA BIT(30) /* Device Reset Asserted */ /* If this bit asserted, the driver should claim the interrupt */ #define IGC_ICR_INT_ASSERTED BIT(31) #define IGC_ICS_RXT0 IGC_ICR_RXT0 /* Rx timer intr */ #define IMS_ENABLE_MASK ( \ IGC_IMS_RXT0 | \ IGC_IMS_TXDW | \ IGC_IMS_RXDMT0 | \ IGC_IMS_RXSEQ | \ IGC_IMS_LSC) /* Interrupt Mask Set */ #define IGC_IMS_TXDW IGC_ICR_TXDW /* Tx desc written back */ #define IGC_IMS_RXSEQ IGC_ICR_RXSEQ /* Rx sequence error */ #define IGC_IMS_LSC IGC_ICR_LSC /* Link Status Change */ #define IGC_IMS_DOUTSYNC IGC_ICR_DOUTSYNC /* NIC DMA out of sync */ #define IGC_IMS_DRSTA IGC_ICR_DRSTA /* Device Reset Asserted */ #define IGC_IMS_RXT0 IGC_ICR_RXT0 /* Rx timer intr */ #define IGC_IMS_RXDMT0 IGC_ICR_RXDMT0 /* Rx desc min. threshold */ #define IGC_IMS_TS IGC_ICR_TS /* Time Sync Interrupt */ #define IGC_QVECTOR_MASK 0x7FFC /* Q-vector mask */ #define IGC_ITR_VAL_MASK 0x04 /* ITR value mask */ /* Interrupt Cause Set */ #define IGC_ICS_LSC IGC_ICR_LSC /* Link Status Change */ #define IGC_ICS_RXDMT0 IGC_ICR_RXDMT0 /* rx desc min. threshold */ #define IGC_ICR_DOUTSYNC 0x10000000 /* NIC DMA out of sync */ #define IGC_EITR_CNT_IGNR 0x80000000 /* Don't reset counters on write */ #define IGC_IVAR_VALID 0x80 #define IGC_GPIE_NSICR 0x00000001 #define IGC_GPIE_MSIX_MODE 0x00000010 #define IGC_GPIE_EIAME 0x40000000 #define IGC_GPIE_PBA 0x80000000 /* Receive Descriptor bit definitions */ #define IGC_RXD_STAT_DD 0x01 /* Descriptor Done */ /* Transmit Descriptor bit definitions */ #define IGC_TXD_DTYP_D 0x00100000 /* Data Descriptor */ #define IGC_TXD_DTYP_C 0x00000000 /* Context Descriptor */ #define IGC_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */ #define IGC_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */ #define IGC_TXD_CMD_EOP 0x01000000 /* End of Packet */ #define IGC_TXD_CMD_IC 0x04000000 /* Insert Checksum */ #define IGC_TXD_CMD_DEXT 0x20000000 /* Desc extension (0 = legacy) */ #define IGC_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */ #define IGC_TXD_STAT_DD 0x00000001 /* Descriptor Done */ #define IGC_TXD_CMD_TCP 0x01000000 /* TCP packet */ #define IGC_TXD_CMD_IP 0x02000000 /* IP packet */ #define IGC_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */ #define IGC_TXD_EXTCMD_TSTAMP 0x00000010 /* IEEE1588 Timestamp packet */ /* IPSec Encrypt Enable */ #define IGC_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */ #define IGC_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */ #define IGC_ADVTXD_TSN_CNTX_FIRST 0x00000080 /* Transmit Control */ #define IGC_TCTL_EN 0x00000002 /* enable Tx */ #define IGC_TCTL_PSP 0x00000008 /* pad short packets */ #define IGC_TCTL_CT 0x00000ff0 /* collision threshold */ #define IGC_TCTL_COLD 0x003ff000 /* collision distance */ #define IGC_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */ /* Flow Control Constants */ #define FLOW_CONTROL_ADDRESS_LOW 0x00C28001 #define FLOW_CONTROL_ADDRESS_HIGH 0x00000100 #define FLOW_CONTROL_TYPE 0x8808 /* Enable XON frame transmission */ #define IGC_FCRTL_XONE 0x80000000 /* Management Control */ #define IGC_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */ #define IGC_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */ /* Receive Control */ #define IGC_RCTL_RST 0x00000001 /* Software reset */ #define IGC_RCTL_EN 0x00000002 /* enable */ #define IGC_RCTL_SBP 0x00000004 /* store bad packet */ #define IGC_RCTL_UPE 0x00000008 /* unicast promisc enable */ #define IGC_RCTL_MPE 0x00000010 /* multicast promisc enable */ #define IGC_RCTL_LPE 0x00000020 /* long packet enable */ #define IGC_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */ #define IGC_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */ #define IGC_RCTL_RDMTS_HALF 0x00000000 /* Rx desc min thresh size */ #define IGC_RCTL_BAM 0x00008000 /* broadcast enable */ /* Split Replication Receive Control */ #define IGC_SRRCTL_TIMESTAMP 0x40000000 #define IGC_SRRCTL_TIMER1SEL(timer) (((timer) & 0x3) << 14) #define IGC_SRRCTL_TIMER0SEL(timer) (((timer) & 0x3) << 17) /* Receive Descriptor bit definitions */ #define IGC_RXD_STAT_EOP 0x02 /* End of Packet */ #define IGC_RXD_STAT_IXSM 0x04 /* Ignore checksum */ #define IGC_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */ #define IGC_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */ #define IGC_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */ #define IGC_RXDEXT_STATERR_LB 0x00040000 /* Advanced Receive Descriptor bit definitions */ #define IGC_RXDADV_STAT_TSIP 0x08000 /* timestamp in packet */ #define IGC_RXDEXT_STATERR_L4E 0x20000000 #define IGC_RXDEXT_STATERR_IPE 0x40000000 #define IGC_RXDEXT_STATERR_RXE 0x80000000 #define IGC_MRQC_RSS_FIELD_IPV4_TCP 0x00010000 #define IGC_MRQC_RSS_FIELD_IPV4 0x00020000 #define IGC_MRQC_RSS_FIELD_IPV6_TCP_EX 0x00040000 #define IGC_MRQC_RSS_FIELD_IPV6 0x00100000 #define IGC_MRQC_RSS_FIELD_IPV6_TCP 0x00200000 /* Header split receive */ #define IGC_RFCTL_IPV6_EX_DIS 0x00010000 #define IGC_RFCTL_LEF 0x00040000 #define IGC_RCTL_SZ_256 0x00030000 /* Rx buffer size 256 */ #define IGC_RCTL_MO_SHIFT 12 /* multicast offset shift */ #define IGC_RCTL_CFIEN 0x00080000 /* canonical form enable */ #define IGC_RCTL_DPF 0x00400000 /* discard pause frames */ #define IGC_RCTL_PMCF 0x00800000 /* pass MAC control frames */ #define IGC_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */ #define I225_RXPBSIZE_DEFAULT 0x000000A2 /* RXPBSIZE default */ #define I225_TXPBSIZE_DEFAULT 0x04000014 /* TXPBSIZE default */ #define IGC_RXPBS_CFG_TS_EN 0x80000000 /* Timestamp in Rx buffer */ #define IGC_TXPBSIZE_TSN 0x04145145 /* 5k bytes buffer for each queue */ #define IGC_DTXMXPKTSZ_TSN 0x19 /* 1600 bytes of max TX DMA packet size */ #define IGC_DTXMXPKTSZ_DEFAULT 0x98 /* 9728-byte Jumbo frames */ /* Time Sync Interrupt Causes */ #define IGC_TSICR_SYS_WRAP BIT(0) /* SYSTIM Wrap around. */ #define IGC_TSICR_TXTS BIT(1) /* Transmit Timestamp. */ #define IGC_TSICR_TT0 BIT(3) /* Target Time 0 Trigger. */ #define IGC_TSICR_TT1 BIT(4) /* Target Time 1 Trigger. */ #define IGC_TSICR_AUTT0 BIT(5) /* Auxiliary Timestamp 0 Taken. */ #define IGC_TSICR_AUTT1 BIT(6) /* Auxiliary Timestamp 1 Taken. */ #define IGC_TSICR_INTERRUPTS IGC_TSICR_TXTS #define IGC_FTQF_VF_BP 0x00008000 #define IGC_FTQF_1588_TIME_STAMP 0x08000000 #define IGC_FTQF_MASK 0xF0000000 #define IGC_FTQF_MASK_PROTO_BP 0x10000000 /* Time Sync Receive Control bit definitions */ #define IGC_TSYNCRXCTL_TYPE_MASK 0x0000000E /* Rx type mask */ #define IGC_TSYNCRXCTL_TYPE_L2_V2 0x00 #define IGC_TSYNCRXCTL_TYPE_L4_V1 0x02 #define IGC_TSYNCRXCTL_TYPE_L2_L4_V2 0x04 #define IGC_TSYNCRXCTL_TYPE_ALL 0x08 #define IGC_TSYNCRXCTL_TYPE_EVENT_V2 0x0A #define IGC_TSYNCRXCTL_ENABLED 0x00000010 /* enable Rx timestamping */ #define IGC_TSYNCRXCTL_SYSCFI 0x00000020 /* Sys clock frequency */ #define IGC_TSYNCRXCTL_RXSYNSIG 0x00000400 /* Sample RX tstamp in PHY sop */ /* Time Sync Receive Configuration */ #define IGC_TSYNCRXCFG_PTP_V1_CTRLT_MASK 0x000000FF #define IGC_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE 0x00 #define IGC_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE 0x01 /* Immediate Interrupt Receive */ #define IGC_IMIR_CLEAR_MASK 0xF001FFFF /* IMIR Reg Clear Mask */ #define IGC_IMIR_PORT_BYPASS 0x20000 /* IMIR Port Bypass Bit */ #define IGC_IMIR_PRIORITY_SHIFT 29 /* IMIR Priority Shift */ #define IGC_IMIREXT_CLEAR_MASK 0x7FFFF /* IMIREXT Reg Clear Mask */ /* Immediate Interrupt Receive Extended */ #define IGC_IMIREXT_CTRL_BP 0x00080000 /* Bypass check of ctrl bits */ #define IGC_IMIREXT_SIZE_BP 0x00001000 /* Packet size bypass */ /* Time Sync Transmit Control bit definitions */ #define IGC_TSYNCTXCTL_TXTT_0 0x00000001 /* Tx timestamp reg 0 valid */ #define IGC_TSYNCTXCTL_ENABLED 0x00000010 /* enable Tx timestamping */ #define IGC_TSYNCTXCTL_MAX_ALLOWED_DLY_MASK 0x0000F000 /* max delay */ #define IGC_TSYNCTXCTL_SYNC_COMP_ERR 0x20000000 /* sync err */ #define IGC_TSYNCTXCTL_SYNC_COMP 0x40000000 /* sync complete */ #define IGC_TSYNCTXCTL_START_SYNC 0x80000000 /* initiate sync */ #define IGC_TSYNCTXCTL_TXSYNSIG 0x00000020 /* Sample TX tstamp in PHY sop */ /* Timer selection bits */ #define IGC_AUX_IO_TIMER_SEL_SYSTIM0 (0u << 30) /* Select SYSTIM0 for auxiliary time stamp */ #define IGC_AUX_IO_TIMER_SEL_SYSTIM1 (1u << 30) /* Select SYSTIM1 for auxiliary time stamp */ #define IGC_AUX_IO_TIMER_SEL_SYSTIM2 (2u << 30) /* Select SYSTIM2 for auxiliary time stamp */ #define IGC_AUX_IO_TIMER_SEL_SYSTIM3 (3u << 30) /* Select SYSTIM3 for auxiliary time stamp */ #define IGC_TT_IO_TIMER_SEL_SYSTIM0 (0u << 30) /* Select SYSTIM0 for target time stamp */ #define IGC_TT_IO_TIMER_SEL_SYSTIM1 (1u << 30) /* Select SYSTIM1 for target time stamp */ #define IGC_TT_IO_TIMER_SEL_SYSTIM2 (2u << 30) /* Select SYSTIM2 for target time stamp */ #define IGC_TT_IO_TIMER_SEL_SYSTIM3 (3u << 30) /* Select SYSTIM3 for target time stamp */ /* TSAUXC Configuration Bits */ #define IGC_TSAUXC_EN_TT0 BIT(0) /* Enable target time 0. */ #define IGC_TSAUXC_EN_TT1 BIT(1) /* Enable target time 1. */ #define IGC_TSAUXC_EN_CLK0 BIT(2) /* Enable Configurable Frequency Clock 0. */ #define IGC_TSAUXC_ST0 BIT(4) /* Start Clock 0 Toggle on Target Time 0. */ #define IGC_TSAUXC_EN_CLK1 BIT(5) /* Enable Configurable Frequency Clock 1. */ #define IGC_TSAUXC_ST1 BIT(7) /* Start Clock 1 Toggle on Target Time 1. */ #define IGC_TSAUXC_EN_TS0 BIT(8) /* Enable hardware timestamp 0. */ #define IGC_TSAUXC_AUTT0 BIT(9) /* Auxiliary Timestamp Taken. */ #define IGC_TSAUXC_EN_TS1 BIT(10) /* Enable hardware timestamp 0. */ #define IGC_TSAUXC_AUTT1 BIT(11) /* Auxiliary Timestamp Taken. */ #define IGC_TSAUXC_PLSG BIT(17) /* Generate a pulse. */ #define IGC_TSAUXC_DISABLE1 BIT(27) /* Disable SYSTIM0 Count Operation. */ #define IGC_TSAUXC_DISABLE2 BIT(28) /* Disable SYSTIM1 Count Operation. */ #define IGC_TSAUXC_DISABLE3 BIT(29) /* Disable SYSTIM2 Count Operation. */ #define IGC_TSAUXC_DIS_TS_CLEAR BIT(30) /* Disable EN_TT0/1 auto clear. */ #define IGC_TSAUXC_DISABLE0 BIT(31) /* Disable SYSTIM0 Count Operation. */ /* SDP Configuration Bits */ #define IGC_AUX0_SEL_SDP0 (0u << 0) /* Assign SDP0 to auxiliary time stamp 0. */ #define IGC_AUX0_SEL_SDP1 (1u << 0) /* Assign SDP1 to auxiliary time stamp 0. */ #define IGC_AUX0_SEL_SDP2 (2u << 0) /* Assign SDP2 to auxiliary time stamp 0. */ #define IGC_AUX0_SEL_SDP3 (3u << 0) /* Assign SDP3 to auxiliary time stamp 0. */ #define IGC_AUX0_TS_SDP_EN (1u << 2) /* Enable auxiliary time stamp trigger 0. */ #define IGC_AUX1_SEL_SDP0 (0u << 3) /* Assign SDP0 to auxiliary time stamp 1. */ #define IGC_AUX1_SEL_SDP1 (1u << 3) /* Assign SDP1 to auxiliary time stamp 1. */ #define IGC_AUX1_SEL_SDP2 (2u << 3) /* Assign SDP2 to auxiliary time stamp 1. */ #define IGC_AUX1_SEL_SDP3 (3u << 3) /* Assign SDP3 to auxiliary time stamp 1. */ #define IGC_AUX1_TS_SDP_EN (1u << 5) /* Enable auxiliary time stamp trigger 1. */ #define IGC_TS_SDP0_SEL_TT0 (0u << 6) /* Target time 0 is output on SDP0. */ #define IGC_TS_SDP0_SEL_TT1 (1u << 6) /* Target time 1 is output on SDP0. */ #define IGC_TS_SDP0_SEL_FC0 (2u << 6) /* Freq clock 0 is output on SDP0. */ #define IGC_TS_SDP0_SEL_FC1 (3u << 6) /* Freq clock 1 is output on SDP0. */ #define IGC_TS_SDP0_EN (1u << 8) /* SDP0 is assigned to Tsync. */ #define IGC_TS_SDP1_SEL_TT0 (0u << 9) /* Target time 0 is output on SDP1. */ #define IGC_TS_SDP1_SEL_TT1 (1u << 9) /* Target time 1 is output on SDP1. */ #define IGC_TS_SDP1_SEL_FC0 (2u << 9) /* Freq clock 0 is output on SDP1. */ #define IGC_TS_SDP1_SEL_FC1 (3u << 9) /* Freq clock 1 is output on SDP1. */ #define IGC_TS_SDP1_EN (1u << 11) /* SDP1 is assigned to Tsync. */ #define IGC_TS_SDP2_SEL_TT0 (0u << 12) /* Target time 0 is output on SDP2. */ #define IGC_TS_SDP2_SEL_TT1 (1u << 12) /* Target time 1 is output on SDP2. */ #define IGC_TS_SDP2_SEL_FC0 (2u << 12) /* Freq clock 0 is output on SDP2. */ #define IGC_TS_SDP2_SEL_FC1 (3u << 12) /* Freq clock 1 is output on SDP2. */ #define IGC_TS_SDP2_EN (1u << 14) /* SDP2 is assigned to Tsync. */ #define IGC_TS_SDP3_SEL_TT0 (0u << 15) /* Target time 0 is output on SDP3. */ #define IGC_TS_SDP3_SEL_TT1 (1u << 15) /* Target time 1 is output on SDP3. */ #define IGC_TS_SDP3_SEL_FC0 (2u << 15) /* Freq clock 0 is output on SDP3. */ #define IGC_TS_SDP3_SEL_FC1 (3u << 15) /* Freq clock 1 is output on SDP3. */ #define IGC_TS_SDP3_EN (1u << 17) /* SDP3 is assigned to Tsync. */ /* Transmit Scheduling */ #define IGC_TQAVCTRL_TRANSMIT_MODE_TSN 0x00000001 #define IGC_TQAVCTRL_ENHANCED_QAV 0x00000008 #define IGC_TXQCTL_QUEUE_MODE_LAUNCHT 0x00000001 #define IGC_TXQCTL_STRICT_CYCLE 0x00000002 #define IGC_TXQCTL_STRICT_END 0x00000004 #define IGC_TXQCTL_QAV_SEL_MASK 0x000000C0 #define IGC_TXQCTL_QAV_SEL_CBS0 0x00000080 #define IGC_TXQCTL_QAV_SEL_CBS1 0x000000C0 #define IGC_TQAVCC_IDLESLOPE_MASK 0xFFFF #define IGC_TQAVCC_KEEP_CREDITS BIT(30) #define IGC_MAX_SR_QUEUES 2 /* Receive Checksum Control */ #define IGC_RXCSUM_CRCOFL 0x00000800 /* CRC32 offload enable */ #define IGC_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */ /* PCIe PTM Control */ #define IGC_PTM_CTRL_START_NOW BIT(29) /* Start PTM Now */ #define IGC_PTM_CTRL_EN BIT(30) /* Enable PTM */ #define IGC_PTM_CTRL_TRIG BIT(31) /* PTM Cycle trigger */ #define IGC_PTM_CTRL_SHRT_CYC(usec) (((usec) & 0x3f) << 2) #define IGC_PTM_CTRL_PTM_TO(usec) (((usec) & 0xff) << 8) #define IGC_PTM_SHORT_CYC_DEFAULT 10 /* Default Short/interrupted cycle interval */ #define IGC_PTM_CYC_TIME_DEFAULT 5 /* Default PTM cycle time */ #define IGC_PTM_TIMEOUT_DEFAULT 255 /* Default timeout for PTM errors */ /* PCIe Digital Delay */ #define IGC_PCIE_DIG_DELAY_DEFAULT 0x01440000 /* PCIe PHY Delay */ #define IGC_PCIE_PHY_DELAY_DEFAULT 0x40900000 #define IGC_TIMADJ_ADJUST_METH 0x40000000 /* PCIe PTM Status */ #define IGC_PTM_STAT_VALID BIT(0) /* PTM Status */ #define IGC_PTM_STAT_RET_ERR BIT(1) /* Root port timeout */ #define IGC_PTM_STAT_BAD_PTM_RES BIT(2) /* PTM Response msg instead of PTM Response Data */ #define IGC_PTM_STAT_T4M1_OVFL BIT(3) /* T4 minus T1 overflow */ #define IGC_PTM_STAT_ADJUST_1ST BIT(4) /* 1588 timer adjusted during 1st PTM cycle */ #define IGC_PTM_STAT_ADJUST_CYC BIT(5) /* 1588 timer adjusted during non-1st PTM cycle */ /* PCIe PTM Cycle Control */ #define IGC_PTM_CYCLE_CTRL_CYC_TIME(msec) ((msec) & 0x3ff) /* PTM Cycle Time (msec) */ #define IGC_PTM_CYCLE_CTRL_AUTO_CYC_EN BIT(31) /* PTM Cycle Control */ /* GPY211 - I225 defines */ #define GPY_MMD_MASK 0xFFFF0000 #define GPY_MMD_SHIFT 16 #define GPY_REG_MASK 0x0000FFFF #define IGC_MMDAC_FUNC_DATA 0x4000 /* Data, no post increment */ /* MAC definitions */ #define IGC_FACTPS_MNGCG 0x20000000 #define IGC_FWSM_MODE_MASK 0xE #define IGC_FWSM_MODE_SHIFT 1 /* Management Control */ #define IGC_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */ #define IGC_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */ /* PHY */ #define PHY_REVISION_MASK 0xFFFFFFF0 #define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */ #define IGC_GEN_POLL_TIMEOUT 1920 /* PHY Control Register */ #define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ #define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ #define MII_CR_POWER_DOWN 0x0800 /* Power down */ #define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ /* PHY Status Register */ #define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ #define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ #define IGC_PHY_RST_COMP 0x0100 /* Internal PHY reset completion */ /* PHY 1000 MII Register/Bit Definitions */ /* PHY Registers defined by IEEE */ #define PHY_CONTROL 0x00 /* Control Register */ #define PHY_STATUS 0x01 /* Status Register */ #define PHY_ID1 0x02 /* Phy Id Reg (word 1) */ #define PHY_ID2 0x03 /* Phy Id Reg (word 2) */ #define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */ #define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */ #define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */ #define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */ /* Bit definitions for valid PHY IDs. I = Integrated E = External */ #define I225_I_PHY_ID 0x67C9DC00 /* MDI Control */ #define IGC_MDIC_DATA_MASK 0x0000FFFF #define IGC_MDIC_REG_MASK 0x001F0000 #define IGC_MDIC_REG_SHIFT 16 #define IGC_MDIC_PHY_MASK 0x03E00000 #define IGC_MDIC_PHY_SHIFT 21 #define IGC_MDIC_OP_WRITE 0x04000000 #define IGC_MDIC_OP_READ 0x08000000 #define IGC_MDIC_READY 0x10000000 #define IGC_MDIC_INT_EN 0x20000000 #define IGC_MDIC_ERROR 0x40000000 #define IGC_N0_QUEUE -1 #define IGC_MAX_MAC_HDR_LEN 127 #define IGC_MAX_NETWORK_HDR_LEN 511 #define IGC_VLANPQF_QSEL(_n, q_idx) ((q_idx) << ((_n) * 4)) #define IGC_VLANPQF_VALID(_n) (0x1 << (3 + (_n) * 4)) #define IGC_VLANPQF_QUEUE_MASK 0x03 #define IGC_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */ #define IGC_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type:1=IPv4 */ #define IGC_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet Type of TCP */ #define IGC_ADVTXD_TUCMD_L4T_SCTP 0x00001000 /* L4 packet TYPE of SCTP */ /* Maximum size of the MTA register table in all supported adapters */ #define MAX_MTA_REG 128 /* EEE defines */ #define IGC_IPCNFG_EEE_2_5G_AN 0x00000010 /* IPCNFG EEE Ena 2.5G AN */ #define IGC_IPCNFG_EEE_1G_AN 0x00000008 /* IPCNFG EEE Ena 1G AN */ #define IGC_IPCNFG_EEE_100M_AN 0x00000004 /* IPCNFG EEE Ena 100M AN */ #define IGC_EEER_EEE_NEG 0x20000000 /* EEE capability nego */ #define IGC_EEER_TX_LPI_EN 0x00010000 /* EEER Tx LPI Enable */ #define IGC_EEER_RX_LPI_EN 0x00020000 /* EEER Rx LPI Enable */ #define IGC_EEER_LPI_FC 0x00040000 /* EEER Ena on Flow Cntrl */ #define IGC_EEE_SU_LPI_CLK_STP 0x00800000 /* EEE LPI Clock Stop */ /* LTR defines */ #define IGC_LTRC_EEEMS_EN 0x00000020 /* Enable EEE LTR max send */ #define IGC_RXPBS_SIZE_I225_MASK 0x0000003F /* Rx packet buffer size */ #define IGC_TW_SYSTEM_1000_MASK 0x000000FF /* Minimum time for 100BASE-T where no data will be transmit following move out * of EEE LPI Tx state */ #define IGC_TW_SYSTEM_100_MASK 0x0000FF00 #define IGC_TW_SYSTEM_100_SHIFT 8 #define IGC_DMACR_DMAC_EN 0x80000000 /* Enable DMA Coalescing */ #define IGC_DMACR_DMACTHR_MASK 0x00FF0000 #define IGC_DMACR_DMACTHR_SHIFT 16 /* Reg val to set scale to 1024 nsec */ #define IGC_LTRMINV_SCALE_1024 2 /* Reg val to set scale to 32768 nsec */ #define IGC_LTRMINV_SCALE_32768 3 /* Reg val to set scale to 1024 nsec */ #define IGC_LTRMAXV_SCALE_1024 2 /* Reg val to set scale to 32768 nsec */ #define IGC_LTRMAXV_SCALE_32768 3 #define IGC_LTRMINV_LTRV_MASK 0x000003FF /* LTR minimum value */ #define IGC_LTRMAXV_LTRV_MASK 0x000003FF /* LTR maximum value */ #define IGC_LTRMINV_LSNP_REQ 0x00008000 /* LTR Snoop Requirement */ #define IGC_LTRMINV_SCALE_SHIFT 10 #define IGC_LTRMAXV_LSNP_REQ 0x00008000 /* LTR Snoop Requirement */ #define IGC_LTRMAXV_SCALE_SHIFT 10 #endif /* _IGC_DEFINES_H_ */