/* SPDX-License-Identifier: GPL-2.0-only */ /* * pm_runtime.h - Device run-time power management helper functions. * * Copyright (C) 2009 Rafael J. Wysocki */ #ifndef _LINUX_PM_RUNTIME_H #define _LINUX_PM_RUNTIME_H #include #include #include #include /* Runtime PM flag argument bits */ #define RPM_ASYNC 0x01 /* Request is asynchronous */ #define RPM_NOWAIT 0x02 /* Don't wait for concurrent state change */ #define RPM_GET_PUT 0x04 /* Increment/decrement the usage_count */ #define RPM_AUTO 0x08 /* Use autosuspend_delay */ #ifdef CONFIG_PM extern struct workqueue_struct *pm_wq; static inline bool queue_pm_work(struct work_struct *work) { return queue_work(pm_wq, work); } extern int pm_generic_runtime_suspend(struct device *dev); extern int pm_generic_runtime_resume(struct device *dev); extern int pm_runtime_force_suspend(struct device *dev); extern int pm_runtime_force_resume(struct device *dev); extern int __pm_runtime_idle(struct device *dev, int rpmflags); extern int __pm_runtime_suspend(struct device *dev, int rpmflags); extern int __pm_runtime_resume(struct device *dev, int rpmflags); extern int pm_runtime_get_if_active(struct device *dev, bool ign_usage_count); extern int pm_schedule_suspend(struct device *dev, unsigned int delay); extern int __pm_runtime_set_status(struct device *dev, unsigned int status); extern int pm_runtime_barrier(struct device *dev); extern void pm_runtime_enable(struct device *dev); extern void __pm_runtime_disable(struct device *dev, bool check_resume); extern void pm_runtime_allow(struct device *dev); extern void pm_runtime_forbid(struct device *dev); extern void pm_runtime_no_callbacks(struct device *dev); extern void pm_runtime_irq_safe(struct device *dev); extern void __pm_runtime_use_autosuspend(struct device *dev, bool use); extern void pm_runtime_set_autosuspend_delay(struct device *dev, int delay); extern u64 pm_runtime_autosuspend_expiration(struct device *dev); extern void pm_runtime_update_max_time_suspended(struct device *dev, s64 delta_ns); extern void pm_runtime_set_memalloc_noio(struct device *dev, bool enable); extern void pm_runtime_get_suppliers(struct device *dev); extern void pm_runtime_put_suppliers(struct device *dev); extern void pm_runtime_new_link(struct device *dev); extern void pm_runtime_drop_link(struct device_link *link); extern void pm_runtime_release_supplier(struct device_link *link); extern int devm_pm_runtime_enable(struct device *dev); /** * pm_runtime_get_if_in_use - Conditionally bump up runtime PM usage counter. * @dev: Target device. * * Increment the runtime PM usage counter of @dev if its runtime PM status is * %RPM_ACTIVE and its runtime PM usage counter is greater than 0. */ static inline int pm_runtime_get_if_in_use(struct device *dev) { return pm_runtime_get_if_active(dev, false); } /** * pm_suspend_ignore_children - Set runtime PM behavior regarding children. * @dev: Target device. * @enable: Whether or not to ignore possible dependencies on children. * * The dependencies of @dev on its children will not be taken into account by * the runtime PM framework going forward if @enable is %true, or they will * be taken into account otherwise. */ static inline void pm_suspend_ignore_children(struct device *dev, bool enable) { dev->power.ignore_children = enable; } /** * pm_runtime_get_noresume - Bump up runtime PM usage counter of a device. * @dev: Target device. */ static inline void pm_runtime_get_noresume(struct device *dev) { atomic_inc(&dev->power.usage_count); } /** * pm_runtime_put_noidle - Drop runtime PM usage counter of a device. * @dev: Target device. * * Decrement the runtime PM usage counter of @dev unless it is 0 already. */ static inline void pm_runtime_put_noidle(struct device *dev) { atomic_add_unless(&dev->power.usage_count, -1, 0); } /** * pm_runtime_suspended - Check whether or not a device is runtime-suspended. * @dev: Target device. * * Return %true if runtime PM is enabled for @dev and its runtime PM status is * %RPM_SUSPENDED, or %false otherwise. * * Note that the return value of this function can only be trusted if it is * called under the runtime PM lock of @dev or under conditions in which * runtime PM cannot be either disabled or enabled for @dev and its runtime PM * status cannot change. */ static inline bool pm_runtime_suspended(struct device *dev) { return dev->power.runtime_status == RPM_SUSPENDED && !dev->power.disable_depth; } /** * pm_runtime_active - Check whether or not a device is runtime-active. * @dev: Target device. * * Return %true if runtime PM is disabled for @dev or its runtime PM status is * %RPM_ACTIVE, or %false otherwise. * * Note that the return value of this function can only be trusted if it is * called under the runtime PM lock of @dev or under conditions in which * runtime PM cannot be either disabled or enabled for @dev and its runtime PM * status cannot change. */ static inline bool pm_runtime_active(struct device *dev) { return dev->power.runtime_status == RPM_ACTIVE || dev->power.disable_depth; } /** * pm_runtime_status_suspended - Check if runtime PM status is "suspended". * @dev: Target device. * * Return %true if the runtime PM status of @dev is %RPM_SUSPENDED, or %false * otherwise, regardless of whether or not runtime PM has been enabled for @dev. * * Note that the return value of this function can only be trusted if it is * called under the runtime PM lock of @dev or under conditions in which the * runtime PM status of @dev cannot change. */ static inline bool pm_runtime_status_suspended(struct device *dev) { return dev->power.runtime_status == RPM_SUSPENDED; } /** * pm_runtime_enabled - Check if runtime PM is enabled. * @dev: Target device. * * Return %true if runtime PM is enabled for @dev or %false otherwise. * * Note that the return value of this function can only be trusted if it is * called under the runtime PM lock of @dev or under conditions in which * runtime PM cannot be either disabled or enabled for @dev. */ static inline bool pm_runtime_enabled(struct device *dev) { return !dev->power.disable_depth; } /** * pm_runtime_has_no_callbacks - Check if runtime PM callbacks may be present. * @dev: Target device. * * Return %true if @dev is a special device without runtime PM callbacks or * %false otherwise. */ static inline bool pm_runtime_has_no_callbacks(struct device *dev) { return dev->power.no_callbacks; } /** * pm_runtime_mark_last_busy - Update the last access time of a device. * @dev: Target device. * * Update the last access time of @dev used by the runtime PM autosuspend * mechanism to the current time as returned by ktime_get_mono_fast_ns(). */ static inline void pm_runtime_mark_last_busy(struct device *dev) { WRITE_ONCE(dev->power.last_busy, ktime_get_mono_fast_ns()); } /** * pm_runtime_is_irq_safe - Check if runtime PM can work in interrupt context. * @dev: Target device. * * Return %true if @dev has been marked as an "IRQ-safe" device (with respect * to runtime PM), in which case its runtime PM callabcks can be expected to * work correctly when invoked from interrupt handlers. */ static inline bool pm_runtime_is_irq_safe(struct device *dev) { return dev->power.irq_safe; } extern u64 pm_runtime_suspended_time(struct device *dev); #else /* !CONFIG_PM */ static inline bool queue_pm_work(struct work_struct *work) { return false; } static inline int pm_generic_runtime_suspend(struct device *dev) { return 0; } static inline int pm_generic_runtime_resume(struct device *dev) { return 0; } static inline int pm_runtime_force_suspend(struct device *dev) { return 0; } static inline int pm_runtime_force_resume(struct device *dev) { return 0; } static inline int __pm_runtime_idle(struct device *dev, int rpmflags) { return -ENOSYS; } static inline int __pm_runtime_suspend(struct device *dev, int rpmflags) { return -ENOSYS; } static inline int __pm_runtime_resume(struct device *dev, int rpmflags) { return 1; } static inline int pm_schedule_suspend(struct device *dev, unsigned int delay) { return -ENOSYS; } static inline int pm_runtime_get_if_in_use(struct device *dev) { return -EINVAL; } static inline int pm_runtime_get_if_active(struct device *dev, bool ign_usage_count) { return -EINVAL; } static inline int __pm_runtime_set_status(struct device *dev, unsigned int status) { return 0; } static inline int pm_runtime_barrier(struct device *dev) { return 0; } static inline void pm_runtime_enable(struct device *dev) {} static inline void __pm_runtime_disable(struct device *dev, bool c) {} static inline void pm_runtime_allow(struct device *dev) {} static inline void pm_runtime_forbid(struct device *dev) {} static inline int devm_pm_runtime_enable(struct device *dev) { return 0; } static inline void pm_suspend_ignore_children(struct device *dev, bool enable) {} static inline void pm_runtime_get_noresume(struct device *dev) {} static inline void pm_runtime_put_noidle(struct device *dev) {} static inline bool pm_runtime_suspended(struct device *dev) { return false; } static inline bool pm_runtime_active(struct device *dev) { return true; } static inline bool pm_runtime_status_suspended(struct device *dev) { return false; } static inline bool pm_runtime_enabled(struct device *dev) { return false; } static inline void pm_runtime_no_callbacks(struct device *dev) {} static inline void pm_runtime_irq_safe(struct device *dev) {} static inline bool pm_runtime_is_irq_safe(struct device *dev) { return false; } static inline bool pm_runtime_has_no_callbacks(struct device *dev) { return false; } static inline void pm_runtime_mark_last_busy(struct device *dev) {} static inline void __pm_runtime_use_autosuspend(struct device *dev, bool use) {} static inline void pm_runtime_set_autosuspend_delay(struct device *dev, int delay) {} static inline u64 pm_runtime_autosuspend_expiration( struct device *dev) { return 0; } static inline void pm_runtime_set_memalloc_noio(struct device *dev, bool enable){} static inline void pm_runtime_get_suppliers(struct device *dev) {} static inline void pm_runtime_put_suppliers(struct device *dev) {} static inline void pm_runtime_new_link(struct device *dev) {} static inline void pm_runtime_drop_link(struct device_link *link) {} static inline void pm_runtime_release_supplier(struct device_link *link) {} #endif /* !CONFIG_PM */ /** * pm_runtime_idle - Conditionally set up autosuspend of a device or suspend it. * @dev: Target device. * * Invoke the "idle check" callback of @dev and, depending on its return value, * set up autosuspend of @dev or suspend it (depending on whether or not * autosuspend has been enabled for it). */ static inline int pm_runtime_idle(struct device *dev) { return __pm_runtime_idle(dev, 0); } /** * pm_runtime_suspend - Suspend a device synchronously. * @dev: Target device. */ static inline int pm_runtime_suspend(struct device *dev) { return __pm_runtime_suspend(dev, 0); } /** * pm_runtime_autosuspend - Set up autosuspend of a device or suspend it. * @dev: Target device. * * Set up autosuspend of @dev or suspend it (depending on whether or not * autosuspend is enabled for it) without engaging its "idle check" callback. */ static inline int pm_runtime_autosuspend(struct device *dev) { return __pm_runtime_suspend(dev, RPM_AUTO); } /** * pm_runtime_resume - Resume a device synchronously. * @dev: Target device. */ static inline int pm_runtime_resume(struct device *dev) { return __pm_runtime_resume(dev, 0); } /** * pm_request_idle - Queue up "idle check" execution for a device. * @dev: Target device. * * Queue up a work item to run an equivalent of pm_runtime_idle() for @dev * asynchronously. */ static inline int pm_request_idle(struct device *dev) { return __pm_runtime_idle(dev, RPM_ASYNC); } /** * pm_request_resume - Queue up runtime-resume of a device. * @dev: Target device. */ static inline int pm_request_resume(struct device *dev) { return __pm_runtime_resume(dev, RPM_ASYNC); } /** * pm_request_autosuspend - Queue up autosuspend of a device. * @dev: Target device. * * Queue up a work item to run an equivalent pm_runtime_autosuspend() for @dev * asynchronously. */ static inline int pm_request_autosuspend(struct device *dev) { return __pm_runtime_suspend(dev, RPM_ASYNC | RPM_AUTO); } /** * pm_runtime_get - Bump up usage counter and queue up resume of a device. * @dev: Target device. * * Bump up the runtime PM usage counter of @dev and queue up a work item to * carry out runtime-resume of it. */ static inline int pm_runtime_get(struct device *dev) { return __pm_runtime_resume(dev, RPM_GET_PUT | RPM_ASYNC); } /** * pm_runtime_get_sync - Bump up usage counter of a device and resume it. * @dev: Target device. * * Bump up the runtime PM usage counter of @dev and carry out runtime-resume of * it synchronously. * * The possible return values of this function are the same as for * pm_runtime_resume() and the runtime PM usage counter of @dev remains * incremented in all cases, even if it returns an error code. * Consider using pm_runtime_resume_and_get() instead of it, especially * if its return value is checked by the caller, as this is likely to result * in cleaner code. */ static inline int pm_runtime_get_sync(struct device *dev) { return __pm_runtime_resume(dev, RPM_GET_PUT); } /** * pm_runtime_resume_and_get - Bump up usage counter of a device and resume it. * @dev: Target device. * * Resume @dev synchronously and if that is successful, increment its runtime * PM usage counter. Return 0 if the runtime PM usage counter of @dev has been * incremented or a negative error code otherwise. */ static inline int pm_runtime_resume_and_get(struct device *dev) { int ret; ret = __pm_runtime_resume(dev, RPM_GET_PUT); if (ret < 0) { pm_runtime_put_noidle(dev); return ret; } return 0; } /** * pm_runtime_put - Drop device usage counter and queue up "idle check" if 0. * @dev: Target device. * * Decrement the runtime PM usage counter of @dev and if it turns out to be * equal to 0, queue up a work item for @dev like in pm_request_idle(). */ static inline int pm_runtime_put(struct device *dev) { return __pm_runtime_idle(dev, RPM_GET_PUT | RPM_ASYNC); } /** * pm_runtime_put_autosuspend - Drop device usage counter and queue autosuspend if 0. * @dev: Target device. * * Decrement the runtime PM usage counter of @dev and if it turns out to be * equal to 0, queue up a work item for @dev like in pm_request_autosuspend(). */ static inline int pm_runtime_put_autosuspend(struct device *dev) { return __pm_runtime_suspend(dev, RPM_GET_PUT | RPM_ASYNC | RPM_AUTO); } /** * pm_runtime_put_sync - Drop device usage counter and run "idle check" if 0. * @dev: Target device. * * Decrement the runtime PM usage counter of @dev and if it turns out to be * equal to 0, invoke the "idle check" callback of @dev and, depending on its * return value, set up autosuspend of @dev or suspend it (depending on whether * or not autosuspend has been enabled for it). * * The possible return values of this function are the same as for * pm_runtime_idle() and the runtime PM usage counter of @dev remains * decremented in all cases, even if it returns an error code. */ static inline int pm_runtime_put_sync(struct device *dev) { return __pm_runtime_idle(dev, RPM_GET_PUT); } /** * pm_runtime_put_sync_suspend - Drop device usage counter and suspend if 0. * @dev: Target device. * * Decrement the runtime PM usage counter of @dev and if it turns out to be * equal to 0, carry out runtime-suspend of @dev synchronously. * * The possible return values of this function are the same as for * pm_runtime_suspend() and the runtime PM usage counter of @dev remains * decremented in all cases, even if it returns an error code. */ static inline int pm_runtime_put_sync_suspend(struct device *dev) { return __pm_runtime_suspend(dev, RPM_GET_PUT); } /** * pm_runtime_put_sync_autosuspend - Drop device usage counter and autosuspend if 0. * @dev: Target device. * * Decrement the runtime PM usage counter of @dev and if it turns out to be * equal to 0, set up autosuspend of @dev or suspend it synchronously (depending * on whether or not autosuspend has been enabled for it). * * The possible return values of this function are the same as for * pm_runtime_autosuspend() and the runtime PM usage counter of @dev remains * decremented in all cases, even if it returns an error code. */ static inline int pm_runtime_put_sync_autosuspend(struct device *dev) { return __pm_runtime_suspend(dev, RPM_GET_PUT | RPM_AUTO); } /** * pm_runtime_set_active - Set runtime PM status to "active". * @dev: Target device. * * Set the runtime PM status of @dev to %RPM_ACTIVE and ensure that dependencies * of it will be taken into account. * * It is not valid to call this function for devices with runtime PM enabled. */ static inline int pm_runtime_set_active(struct device *dev) { return __pm_runtime_set_status(dev, RPM_ACTIVE); } /** * pm_runtime_set_suspended - Set runtime PM status to "suspended". * @dev: Target device. * * Set the runtime PM status of @dev to %RPM_SUSPENDED and ensure that * dependencies of it will be taken into account. * * It is not valid to call this function for devices with runtime PM enabled. */ static inline int pm_runtime_set_suspended(struct device *dev) { return __pm_runtime_set_status(dev, RPM_SUSPENDED); } /** * pm_runtime_disable - Disable runtime PM for a device. * @dev: Target device. * * Prevent the runtime PM framework from working with @dev (by incrementing its * "blocking" counter). * * For each invocation of this function for @dev there must be a matching * pm_runtime_enable() call in order for runtime PM to be enabled for it. */ static inline void pm_runtime_disable(struct device *dev) { __pm_runtime_disable(dev, true); } /** * pm_runtime_use_autosuspend - Allow autosuspend to be used for a device. * @dev: Target device. * * Allow the runtime PM autosuspend mechanism to be used for @dev whenever * requested (or "autosuspend" will be handled as direct runtime-suspend for * it). * * NOTE: It's important to undo this with pm_runtime_dont_use_autosuspend() * at driver exit time unless your driver initially enabled pm_runtime * with devm_pm_runtime_enable() (which handles it for you). */ static inline void pm_runtime_use_autosuspend(struct device *dev) { __pm_runtime_use_autosuspend(dev, true); } /** * pm_runtime_dont_use_autosuspend - Prevent autosuspend from being used. * @dev: Target device. * * Prevent the runtime PM autosuspend mechanism from being used for @dev which * means that "autosuspend" will be handled as direct runtime-suspend for it * going forward. */ static inline void pm_runtime_dont_use_autosuspend(struct device *dev) { __pm_runtime_use_autosuspend(dev, false); } #endif