// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright (C) 2014 Marvell
 * Author: Gregory CLEMENT <gregory.clement@free-electrons.com>
 */

#include <linux/io.h>
#include <linux/mbus.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>

#include <linux/usb.h>
#include <linux/usb/hcd.h>

#include "xhci-mvebu.h"
#include "xhci.h"

#define USB3_MAX_WINDOWS	4
#define USB3_WIN_CTRL(w)	(0x0 + ((w) * 8))
#define USB3_WIN_BASE(w)	(0x4 + ((w) * 8))

static void xhci_mvebu_mbus_config(void __iomem *base,
			const struct mbus_dram_target_info *dram)
{
	int win;

	/* Clear all existing windows */
	for (win = 0; win < USB3_MAX_WINDOWS; win++) {
		writel(0, base + USB3_WIN_CTRL(win));
		writel(0, base + USB3_WIN_BASE(win));
	}

	/* Program each DRAM CS in a seperate window */
	for (win = 0; win < dram->num_cs; win++) {
		const struct mbus_dram_window *cs = &dram->cs[win];

		writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) |
		       (dram->mbus_dram_target_id << 4) | 1,
		       base + USB3_WIN_CTRL(win));

		writel((cs->base & 0xffff0000), base + USB3_WIN_BASE(win));
	}
}

int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd)
{
	struct device *dev = hcd->self.controller;
	struct platform_device *pdev = to_platform_device(dev);
	struct resource	*res;
	void __iomem *base;
	const struct mbus_dram_target_info *dram;

	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
	if (!res)
		return -ENODEV;

	/*
	 * We don't use devm_ioremap() because this mapping should
	 * only exists for the duration of this probe function.
	 */
	base = ioremap(res->start, resource_size(res));
	if (!base)
		return -ENODEV;

	dram = mv_mbus_dram_info();
	xhci_mvebu_mbus_config(base, dram);

	/*
	 * This memory area was only needed to configure the MBus
	 * windows, and is therefore no longer useful.
	 */
	iounmap(base);

	return 0;
}

int xhci_mvebu_a3700_plat_setup(struct usb_hcd *hcd)
{
	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
	struct device *dev = hcd->self.controller;
	struct phy *phy;
	int ret;

	/* Old bindings miss the PHY handle */
	phy = of_phy_get(dev->of_node, "usb3-phy");
	if (IS_ERR(phy) && PTR_ERR(phy) == -EPROBE_DEFER)
		return -EPROBE_DEFER;
	else if (IS_ERR(phy))
		goto phy_out;

	ret = phy_init(phy);
	if (ret)
		goto phy_put;

	ret = phy_set_mode(phy, PHY_MODE_USB_HOST_SS);
	if (ret)
		goto phy_exit;

	ret = phy_power_on(phy);
	if (ret == -EOPNOTSUPP) {
		/* Skip initializatin of XHCI PHY when it is unsupported by firmware */
		dev_warn(dev, "PHY unsupported by firmware\n");
		xhci->quirks |= XHCI_SKIP_PHY_INIT;
	}
	if (ret)
		goto phy_exit;

	phy_power_off(phy);
phy_exit:
	phy_exit(phy);
phy_put:
	of_phy_put(phy);
phy_out:

	return 0;
}

int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd)
{
	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);

	/* Without reset on resume, the HC won't work at all */
	xhci->quirks |= XHCI_RESET_ON_RESUME;

	return 0;
}