bus "i2c-0" "SMBus I801 adapter at 1100"
chip "w83793-i2c-0-2f"

# 0x10, CPU Core 1
    label in0 "CPU Core 1"
# 0x11, CPU Core 2
    label in1 "CPU Core 2"
# 0x12 VTT=1.1V in BIOS
    label in2 "VTT"
    set in2_min 1.1*0.95
    set in2_max 1.1*1.05
# 0x14, -12V
    label in3 "-12V"
    compute in3 (((@/8)*18500)/256)-16, (((@+16)*256)/18500)*8
    set in3_min -12*1.05
    set in3_max -12*0.95
# 0x15, DIMM
    label in4 "P1V5"
# 0x16, +3.3V
    label in5 "+3.3V"
    set in5_min 3.3*0.95
    set in5_max 3.3*1.05
# 0x17, +12V
    label in6 "+12V"
    compute in6 @*12,@/12
    set in6_min 12*0.95
    set in6_max 12*1.05
# Ox18, +5V
    label in7 "+5V"
    set in7_min 5*0.95
    set in7_max 5*1.05
# 0x19, 5VSB
    label in8 "5VSB"
    set in8_min 5*0.95
    set in8_max 5*1.05
# 0x1a, Battery Voltage
    label in9 "VBAT"

    label temp1 "CPU1 Temp"
    label temp2 "CPU2 Temp"
    ignore temp3
    ignore temp4
    label temp5 "System Temp"

    label fan1 "CPU1 fan"
    label fan2 "CPU2 fan"
    label fan3 "Fan 3"
    label fan4 "Fan 4"
    label fan5 "Fan 5"
    label fan6 "Fan 6"
    ignore fan7
    ignore fan8
    ignore fan9
    ignore fan10
    ignore fan11
    ignore fan12

    label intrusion0 "Intrusion"
    ignore beep_enable


chip "w83627hf-isa-0290"
    # no driver access to GP11, so I turned off everything.
    ignore in0
    ignore in1
    ignore in2
    ignore in3
    ignore in4
    ignore in5
    ignore in6
    ignore in7
    ignore in8
    ignore cpu0_vid
    ignore fan1
    ignore fan2
    ignore fan3
    ignore temp1
    ignore temp2
    ignore temp3
    ignore beep_enable
