/*
 * linux/drivers/pcmcia/pxa/pxa.c
 *
 * Author:	George Davis
 * Created:	Jan 10, 2002
 * Copyright:	MontaVista Software Inc.
 * 
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * Originally based upon linux/drivers/pcmcia/sa1100_generic.c
 *
 */

/*======================================================================

    Device driver for the PCMCIA control functionality of Intel
    PXA250/210 microprocessors.

    The contents of this file are subject to the Mozilla Public
    License Version 1.1 (the "License"); you may not use this file
    except in compliance with the License. You may obtain a copy of
    the License at http://www.mozilla.org/MPL/

    Software distributed under the License is distributed on an "AS
    IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
    implied. See the License for the specific language governing
    rights and limitations under the License.

    The initial developer of the original code is John G. Dorsey
    <john+@cs.cmu.edu>.  Portions created by John G. Dorsey are
    Copyright (C) 1999 John G. Dorsey.  All Rights Reserved.

    Alternatively, the contents of this file may be used under the
    terms of the GNU Public License version 2 (the "GPL"), in which
    case the provisions of the GPL are applicable instead of the
    above.  If you wish to allow the use of your version of this file
    only under the terms of the GPL and not to allow others to use
    your version of this file under the MPL, indicate your decision
    by deleting the provisions above and replace them with the notice
    and other provisions required by the GPL.  If you do not delete
    the provisions above, a recipient may use your version of this
    file under either the MPL or the GPL.
    
======================================================================*/

#include <linux/module.h>
#include <linux/init.h>
#include <linux/config.h>
#include <linux/cpufreq.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/tqueue.h>
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/notifier.h>
#include <linux/proc_fs.h>
#include <linux/version.h>
#include <linux/cpufreq.h>

#include <pcmcia/version.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/ss.h>
#include <pcmcia/bus_ops.h>

#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/arch/lubbock.h>

#include "pxa.h"

#ifdef PCMCIA_DEBUG
static int pc_debug;
#endif

MODULE_AUTHOR("George Davis <davis_g@mvista.com>");
MODULE_DESCRIPTION("Linux PCMCIA Card Services: PXA250/210 Socket Controller");

/* This structure maintains housekeeping state for each socket, such
 * as the last known values of the card detect pins, or the Card Services
 * callback value associated with the socket:
 */
static struct pxa_pcmcia_socket 
pxa_pcmcia_socket[PXA_PCMCIA_MAX_SOCK];

static int pxa_pcmcia_socket_count;


/* Returned by the low-level PCMCIA interface: */
static struct pcmcia_low_level *pcmcia_low_level;

/* Event poll timer structure */
static struct timer_list poll_timer;


/* Prototypes for routines which are used internally: */

static int  pxa_pcmcia_driver_init(void);
static void pxa_pcmcia_driver_shutdown(void);
static void pxa_pcmcia_task_handler(void *data);
static void pxa_pcmcia_poll_event(unsigned long data);
static void pxa_pcmcia_interrupt(int irq, void *dev,
				    struct pt_regs *regs);
static struct tq_struct pxa_pcmcia_task;

#ifdef CONFIG_PROC_FS
static int  pxa_pcmcia_proc_status(char *buf, char **start, off_t pos,
				      int count, int *eof, void *data);
#endif


/* Prototypes for operations which are exported to the
 * new-and-impr^H^H^H^H^H^H^H^H^H^H in-kernel PCMCIA core:
 */

static int pxa_pcmcia_init(unsigned int sock);
static int pxa_pcmcia_suspend(unsigned int sock);
static int pxa_pcmcia_register_callback(unsigned int sock,
					   void (*handler)(void *, 
							   unsigned int),
					   void *info);
static int pxa_pcmcia_inquire_socket(unsigned int sock, 
					socket_cap_t *cap);
static int pxa_pcmcia_get_status(unsigned int sock, u_int *value);
static int pxa_pcmcia_get_socket(unsigned int sock, 
				    socket_state_t *state);
static int pxa_pcmcia_set_socket(unsigned int sock,
				    socket_state_t *state);
static int pxa_pcmcia_get_io_map(unsigned int sock,
				    struct pccard_io_map *io);
static int pxa_pcmcia_set_io_map(unsigned int sock,
				    struct pccard_io_map *io);
static int pxa_pcmcia_get_mem_map(unsigned int sock,
				     struct pccard_mem_map *mem);
static int pxa_pcmcia_set_mem_map(unsigned int sock,
				     struct pccard_mem_map *mem);
#ifdef CONFIG_PROC_FS
static void pxa_pcmcia_proc_setup(unsigned int sock,
				     struct proc_dir_entry *base);
#endif

static struct pccard_operations pxa_pcmcia_operations = {
  pxa_pcmcia_init,
  pxa_pcmcia_suspend,
  pxa_pcmcia_register_callback,
  pxa_pcmcia_inquire_socket,
  pxa_pcmcia_get_status,
  pxa_pcmcia_get_socket,
  pxa_pcmcia_set_socket,
  pxa_pcmcia_get_io_map,
  pxa_pcmcia_set_io_map,
  pxa_pcmcia_get_mem_map,
  pxa_pcmcia_set_mem_map,
#ifdef CONFIG_PROC_FS
  pxa_pcmcia_proc_setup
#endif
};

#ifdef CONFIG_CPU_FREQ
/* forward declaration */
static struct notifier_block pxa_pcmcia_notifier_block;
#endif


/* pxa_pcmcia_driver_init()
 * ^^^^^^^^^^^^^^^^^^^^^^^^^^^
 *
 * This routine performs a basic sanity check to ensure that this
 * kernel has been built with the appropriate board-specific low-level
 * PCMCIA support, performs low-level PCMCIA initialization, registers
 * this socket driver with Card Services, and then spawns the daemon
 * thread which is the real workhorse of the socket driver.
 *
 * Please see linux/Documentation/arm/SA1100/PCMCIA for more information
 * on the low-level kernel interface.
 *
 * Returns: 0 on success, -1 on error
 */
static int __init pxa_pcmcia_driver_init(void){
  servinfo_t info;
  struct pcmcia_init pcmcia_init;
  struct pcmcia_state state[PXA_PCMCIA_MAX_SOCK];
  struct pcmcia_state_array state_array;
  unsigned int i, clock;
  unsigned long mecr;

  printk(KERN_INFO "Intel PXA250/210 PCMCIA (CS release %s)\n", CS_RELEASE);

  CardServices(GetCardServicesInfo, &info);

  if(info.Revision!=CS_RELEASE_CODE){
    printk(KERN_ERR "Card Services release codes do not match\n");
    return -1;
  }

  /* Setup GPIOs for PCMCIA/CF alternate function mode.
   *
   * It would be nice if set_GPIO_mode included support
   * for driving GPIO outputs to default high/low state
   * before programming GPIOs as outputs. Setting GPIO
   * outputs to default high/low state via GPSR/GPCR
   * before defining them as outputs should reduce
   * the possibility of glitching outputs during GPIO
   * setup. This of course assumes external terminators
   * are present to hold GPIOs in a defined state.
   *
   * In the meantime, setup default state of GPIO
   * outputs before we enable them as outputs.
   */

  GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
                      GPIO_bit(GPIO49_nPWE) |
                      GPIO_bit(GPIO50_nPIOR) |
                      GPIO_bit(GPIO51_nPIOW) |
                      GPIO_bit(GPIO52_nPCE_1) |
                      GPIO_bit(GPIO53_nPCE_2);

  set_GPIO_mode(GPIO48_nPOE_MD);
  set_GPIO_mode(GPIO49_nPWE_MD);
  set_GPIO_mode(GPIO50_nPIOR_MD);
  set_GPIO_mode(GPIO51_nPIOW_MD);
  set_GPIO_mode(GPIO52_nPCE_1_MD);
  set_GPIO_mode(GPIO53_nPCE_2_MD);
  set_GPIO_mode(GPIO54_pSKTSEL_MD); /* REVISIT: s/b dependent on num sockets */
  set_GPIO_mode(GPIO55_nPREG_MD);
  set_GPIO_mode(GPIO56_nPWAIT_MD);
  set_GPIO_mode(GPIO57_nIOIS16_MD);


  if(machine_is_lubbock()){
#ifdef CONFIG_ARCH_LUBBOCK
    pcmcia_low_level=&lubbock_pcmcia_ops;
#endif
  }

  if (!pcmcia_low_level) {
    printk(KERN_ERR "This hardware is not supported by the PXA250/210 Card Service driver\n");
    return -ENODEV;
  }

  pcmcia_init.handler=pxa_pcmcia_interrupt;

  if((pxa_pcmcia_socket_count=pcmcia_low_level->init(&pcmcia_init))<0){
    printk(KERN_ERR "Unable to initialize kernel PCMCIA service.\n");
    return -EIO;
  }

  state_array.size=pxa_pcmcia_socket_count;
  state_array.state=state;

  /* Configure MECR based on the number of sockets present. */
  if (pxa_pcmcia_socket_count == 2) {
    MECR |= GPIO_bit(0);
  } else {
    MECR &= ~GPIO_bit(0);
  }

  if(pcmcia_low_level->socket_state(&state_array)<0){
    printk(KERN_ERR "Unable to get PCMCIA status from kernel.\n");
    return -EIO;
  }

  /* Well, it looks good to go. So we can now enable the PCMCIA
   * controller.
   */
  MECR |= GPIO_bit(1);

  /* We need to initialize the MCXX registers to default values
   * here because we're not guaranteed to see a SetIOMap operation
   * at runtime.
   */

  clock = get_lclk_frequency_10khz();

  for(i=0; i<pxa_pcmcia_socket_count; ++i){
    pxa_pcmcia_socket[i].k_state=state[i];

    /* This is an interim fix. Apparently, SetSocket is no longer
     * called to initialize each socket (prior to the first detect
     * event). For now, we'll just manually set up the mask.
     */
    pxa_pcmcia_socket[i].cs_state.csc_mask=SS_DETECT;

    pxa_pcmcia_socket[i].virt_io=(i==0)?PCMCIA_IO_0_BASE:PCMCIA_IO_1_BASE;
    pxa_pcmcia_socket[i].phys_attr=_PCMCIAAttr(i);
    pxa_pcmcia_socket[i].phys_mem=_PCMCIAMem(i);

    /* REVISIT: cleanup these macros */
    //MCIO_SET(i, PXA_PCMCIA_IO_ACCESS, clock);
    //MCATTR_SET(i, PXA_PCMCIA_5V_MEM_ACCESS, clock);
    //MCMEM_SET(i, PXA_PCMCIA_5V_MEM_ACCESS, clock);

    pxa_pcmcia_socket[i].speed_io=PXA_PCMCIA_IO_ACCESS;
    pxa_pcmcia_socket[i].speed_attr=PXA_PCMCIA_5V_MEM_ACCESS;
    pxa_pcmcia_socket[i].speed_mem=PXA_PCMCIA_5V_MEM_ACCESS;
  }

/* REVISIT: cleanup these macros */
MCMEM0 = ((pxa_mcxx_setup(PXA_PCMCIA_5V_MEM_ACCESS, clock)
		& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
       | ((pxa_mcxx_asst(PXA_PCMCIA_5V_MEM_ACCESS, clock)
		& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
       | ((pxa_mcxx_hold(PXA_PCMCIA_5V_MEM_ACCESS, clock)
		& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
MCMEM1 = ((pxa_mcxx_setup(PXA_PCMCIA_5V_MEM_ACCESS, clock)
		& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
       | ((pxa_mcxx_asst(PXA_PCMCIA_5V_MEM_ACCESS, clock)
		& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
       | ((pxa_mcxx_hold(PXA_PCMCIA_5V_MEM_ACCESS, clock)
		& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
MCATT0 = ((pxa_mcxx_setup(PXA_PCMCIA_5V_MEM_ACCESS, clock)
		& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
       | ((pxa_mcxx_asst(PXA_PCMCIA_5V_MEM_ACCESS, clock)
		& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
       | ((pxa_mcxx_hold(PXA_PCMCIA_5V_MEM_ACCESS, clock)
		& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
MCATT1 = ((pxa_mcxx_setup(PXA_PCMCIA_5V_MEM_ACCESS, clock)
		& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
       | ((pxa_mcxx_asst(PXA_PCMCIA_5V_MEM_ACCESS, clock)
		& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
       | ((pxa_mcxx_hold(PXA_PCMCIA_5V_MEM_ACCESS, clock)
		& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
MCIO0 = ((pxa_mcxx_setup(PXA_PCMCIA_IO_ACCESS, clock)
		& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
       | ((pxa_mcxx_asst(PXA_PCMCIA_IO_ACCESS, clock)
		& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
       | ((pxa_mcxx_hold(PXA_PCMCIA_IO_ACCESS, clock)
		& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
MCIO1 = ((pxa_mcxx_setup(PXA_PCMCIA_IO_ACCESS, clock)
		& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
       | ((pxa_mcxx_asst(PXA_PCMCIA_IO_ACCESS, clock)
		& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
       | ((pxa_mcxx_hold(PXA_PCMCIA_IO_ACCESS, clock)
		& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);

#ifdef CONFIG_CPU_FREQ
  if(cpufreq_register_notifier(&pxa_pcmcia_notifier_block) < 0){
    printk(KERN_ERR "Unable to register CPU frequency change notifier\n");
    return -ENXIO;
  }
#endif

  /* Only advertise as many sockets as we can detect: */
  if(register_ss_entry(pxa_pcmcia_socket_count, 
		       &pxa_pcmcia_operations)<0){
    printk(KERN_ERR "Unable to register socket service routine\n");
    return -ENXIO;
  }

  /* Start the event poll timer.  It will reschedule by itself afterwards. */
  pxa_pcmcia_poll_event(0);

  DEBUG(1, "pxa_cs: initialization complete\n");

  return 0;

}  /* pxa_pcmcia_driver_init() */

module_init(pxa_pcmcia_driver_init);


/* pxa_pcmcia_driver_shutdown()
 * ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 * Invokes the low-level kernel service to free IRQs associated with this
 * socket controller and reset GPIO edge detection.
 */
static void __exit pxa_pcmcia_driver_shutdown(void){

  del_timer_sync(&poll_timer);
  unregister_ss_entry(&pxa_pcmcia_operations);
#ifdef CONFIG_CPU_FREQ
  cpufreq_unregister_notifier(&pxa_pcmcia_notifier_block);
#endif
  pcmcia_low_level->shutdown();
  flush_scheduled_tasks();

  DEBUG(1, "pxa_cs: shutdown complete\n");
}

module_exit(pxa_pcmcia_driver_shutdown);


/* pxa_pcmcia_init()
 * ^^^^^^^^^^^^^^^^^^^^
 * We perform all of the interesting initialization tasks in 
 * pxa_pcmcia_driver_init().
 *
 * Returns: 0
 */
static int pxa_pcmcia_init(unsigned int sock){
  
  DEBUG(2, "%s(): initializing socket %u\n", __FUNCTION__, sock);

  return 0;
}


/* pxa_pcmcia_suspend()
 * ^^^^^^^^^^^^^^^^^^^^^^^
 * We don't currently perform any actions on a suspend.
 *
 * Returns: 0
 */
static int pxa_pcmcia_suspend(unsigned int sock)
{
  struct pcmcia_configure conf;
  int ret;

  DEBUG(2, "%s(): suspending socket %u\n", __FUNCTION__, sock);

  conf.sock = sock;
  conf.vcc = 0;
  conf.vpp = 0;
  conf.output = 0;
  conf.speaker = 0;
  conf.reset = 1;

  ret = pcmcia_low_level->configure_socket(&conf);

  if (ret == 0)
    pxa_pcmcia_socket[sock].cs_state = dead_socket;

  return ret;
}


/* pxa_pcmcia_events()
 * ^^^^^^^^^^^^^^^^^^^^^^
 * Helper routine to generate a Card Services event mask based on
 * state information obtained from the kernel low-level PCMCIA layer
 * in a recent (and previous) sampling. Updates `prev_state'.
 *
 * Returns: an event mask for the given socket state.
 */
static inline unsigned pxa_pcmcia_events(struct pcmcia_state *state,
					    struct pcmcia_state *prev_state,
					    unsigned int mask,
					    unsigned int flags){
  unsigned int events=0;

  if(state->detect!=prev_state->detect){

    DEBUG(2, "%s(): card detect value %u\n", __FUNCTION__, state->detect);

    events|=mask&SS_DETECT;
  }

  if(state->ready!=prev_state->ready){

    DEBUG(2, "%s(): card ready value %u\n", __FUNCTION__, state->ready);

    events|=mask&((flags&SS_IOCARD)?0:SS_READY);
  }

  if(state->bvd1!=prev_state->bvd1){

    DEBUG(2, "%s(): card BVD1 value %u\n", __FUNCTION__, state->bvd1);

    events|=mask&(flags&SS_IOCARD)?SS_STSCHG:SS_BATDEAD;
  }

  if(state->bvd2!=prev_state->bvd2){

    DEBUG(2, "%s(): card BVD2 value %u\n", __FUNCTION__, state->bvd2);

    events|=mask&(flags&SS_IOCARD)?0:SS_BATWARN;
  }

  DEBUG(2, "events: %s%s%s%s%s%s\n",
	(events==0)?"<NONE>":"",
	(events&SS_DETECT)?"DETECT ":"",
	(events&SS_READY)?"READY ":"",
	(events&SS_BATDEAD)?"BATDEAD ":"",
	(events&SS_BATWARN)?"BATWARN ":"",
	(events&SS_STSCHG)?"STSCHG ":"");

  *prev_state=*state;

  return events;

}  /* pxa_pcmcia_events() */


/* pxa_pcmcia_task_handler()
 * ^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 * Processes serviceable socket events using the "eventd" thread context.
 *
 * Event processing (specifically, the invocation of the Card Services event
 * callback) occurs in this thread rather than in the actual interrupt
 * handler due to the use of scheduling operations in the PCMCIA core.
 */
static void pxa_pcmcia_task_handler(void *data) {
  struct pcmcia_state state[PXA_PCMCIA_MAX_SOCK];
  struct pcmcia_state_array state_array;
  int i, events, all_events, irq_status;

  DEBUG(2, "%s(): entering PCMCIA monitoring thread\n", __FUNCTION__);

  state_array.size=pxa_pcmcia_socket_count;
  state_array.state=state;

  do {

    DEBUG(3, "%s(): interrogating low-level PCMCIA service\n", __FUNCTION__);

    if((irq_status=pcmcia_low_level->socket_state(&state_array))<0)
      printk(KERN_ERR "Error in kernel low-level PCMCIA service.\n");

    all_events=0;

    if(irq_status>0){

      for(i=0; i<state_array.size; ++i, all_events|=events)
	if((events=
	    pxa_pcmcia_events(&state[i],
				 &pxa_pcmcia_socket[i].k_state,
				 pxa_pcmcia_socket[i].cs_state.csc_mask,
				 pxa_pcmcia_socket[i].cs_state.flags)))
	  if(pxa_pcmcia_socket[i].handler!=NULL)
	    pxa_pcmcia_socket[i].handler(pxa_pcmcia_socket[i].handler_info,
					    events);
    }

  } while(all_events);
}  /* pxa_pcmcia_task_handler() */

static struct tq_struct pxa_pcmcia_task = {
	routine: pxa_pcmcia_task_handler
};


/* pxa_pcmcia_poll_event()
 * ^^^^^^^^^^^^^^^^^^^^^^^^^^
 * Let's poll for events in addition to IRQs since IRQ only is unreliable...
 */
static void pxa_pcmcia_poll_event(unsigned long dummy)
{
  DEBUG(3, "%s(): polling for events\n", __FUNCTION__);
  poll_timer.function = pxa_pcmcia_poll_event;
  poll_timer.expires = jiffies + PXA_PCMCIA_POLL_PERIOD;
  add_timer(&poll_timer);
  schedule_task(&pxa_pcmcia_task);
}


/* pxa_pcmcia_interrupt()
 * ^^^^^^^^^^^^^^^^^^^^^^^^^
 * Service routine for socket driver interrupts (requested by the
 * low-level PCMCIA init() operation via pxa_pcmcia_thread()).
 * The actual interrupt-servicing work is performed by
 * pxa_pcmcia_thread(), largely because the Card Services event-
 * handling code performs scheduling operations which cannot be
 * executed from within an interrupt context.
 */
static void pxa_pcmcia_interrupt(int irq, void *dev, struct pt_regs *regs){
  DEBUG(3, "%s(): servicing IRQ %d\n", __FUNCTION__, irq);
  schedule_task(&pxa_pcmcia_task);
}


/* pxa_pcmcia_register_callback()
 * ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 * Implements the register_callback() operation for the in-kernel
 * PCMCIA service (formerly SS_RegisterCallback in Card Services). If 
 * the function pointer `handler' is not NULL, remember the callback 
 * location in the state for `sock', and increment the usage counter 
 * for the driver module. (The callback is invoked from the interrupt
 * service routine, pxa_pcmcia_interrupt(), to notify Card Services
 * of interesting events.) Otherwise, clear the callback pointer in the
 * socket state and decrement the module usage count.
 *
 * Returns: 0
 */
static int pxa_pcmcia_register_callback(unsigned int sock,
					   void (*handler)(void *,
							   unsigned int),
					   void *info){
  if(handler==NULL){
    pxa_pcmcia_socket[sock].handler=NULL;
    MOD_DEC_USE_COUNT;
  } else {
    MOD_INC_USE_COUNT;
    pxa_pcmcia_socket[sock].handler=handler;
    pxa_pcmcia_socket[sock].handler_info=info;
  }

  return 0;
}


/* pxa_pcmcia_inquire_socket()
 * ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 * Implements the inquire_socket() operation for the in-kernel PCMCIA
 * service (formerly SS_InquireSocket in Card Services). Of note is
 * the setting of the SS_CAP_PAGE_REGS bit in the `features' field of
 * `cap' to "trick" Card Services into tolerating large "I/O memory" 
 * addresses. Also set is SS_CAP_STATIC_MAP, which disables the memory
 * resource database check. (Mapped memory is set up within the socket
 * driver itself.)
 *
 * In conjunction with the STATIC_MAP capability is a new field,
 * `io_offset', recommended by David Hinds. Rather than go through
 * the SetIOMap interface (which is not quite suited for communicating
 * window locations up from the socket driver), we just pass up
 * an offset which is applied to client-requested base I/O addresses
 * in alloc_io_space().
 *
 * Returns: 0 on success, -1 if no pin has been configured for `sock'
 */
static int pxa_pcmcia_inquire_socket(unsigned int sock,
					socket_cap_t *cap){
  struct pcmcia_irq_info irq_info;

  DEBUG(3, "%s() for sock %u\n", __FUNCTION__, sock);

  if(sock>=pxa_pcmcia_socket_count){
    printk(KERN_ERR "pxa_cs: socket %u not configured\n", sock);
    return -1;
  }

  /* SS_CAP_PAGE_REGS: used by setup_cis_mem() in cistpl.c to set the
   *   force_low argument to validate_mem() in rsrc_mgr.c -- since in
   *   general, the mapped * addresses of the PCMCIA memory regions
   *   will not be within 0xffff, setting force_low would be
   *   undesirable.
   *
   * SS_CAP_STATIC_MAP: don't bother with the (user-configured) memory
   *   resource database; we instead pass up physical address ranges
   *   and allow other parts of Card Services to deal with remapping.
   *
   * SS_CAP_PCCARD: we can deal with 16-bit PCMCIA & CF cards, but
   *   not 32-bit CardBus devices.
   */
  cap->features=(SS_CAP_PAGE_REGS  | SS_CAP_STATIC_MAP | SS_CAP_PCCARD);

  irq_info.sock=sock;
  irq_info.irq=-1;

  if(pcmcia_low_level->get_irq_info(&irq_info)<0){
    printk(KERN_ERR "Error obtaining IRQ info from kernel for socket %u\n",
	   sock);
    return -1;
  }

  cap->irq_mask=0;
  cap->map_size=PAGE_SIZE;
  cap->pci_irq=irq_info.irq;
  cap->io_offset=pxa_pcmcia_socket[sock].virt_io;

  return 0;

}  /* pxa_pcmcia_inquire_socket() */


/* pxa_pcmcia_get_status()
 * ^^^^^^^^^^^^^^^^^^^^^^^^^^
 * Implements the get_status() operation for the in-kernel PCMCIA
 * service (formerly SS_GetStatus in Card Services). Essentially just
 * fills in bits in `status' according to internal driver state or
 * the value of the voltage detect chipselect register.
 *
 * As a debugging note, during card startup, the PCMCIA core issues
 * three set_socket() commands in a row the first with RESET deasserted,
 * the second with RESET asserted, and the last with RESET deasserted
 * again. Following the third set_socket(), a get_status() command will
 * be issued. The kernel is looking for the SS_READY flag (see
 * setup_socket(), reset_socket(), and unreset_socket() in cs.c).
 *
 * Returns: 0
 */
static int pxa_pcmcia_get_status(unsigned int sock,
				    unsigned int *status){
  struct pcmcia_state state[PXA_PCMCIA_MAX_SOCK];
  struct pcmcia_state_array state_array;

  DEBUG(3, "%s() for sock %u\n", __FUNCTION__, sock);

  state_array.size=pxa_pcmcia_socket_count;
  state_array.state=state;

  if((pcmcia_low_level->socket_state(&state_array))<0){
    printk(KERN_ERR "Unable to get PCMCIA status from kernel.\n");
    return -1;
  }

  pxa_pcmcia_socket[sock].k_state=state[sock];

  *status=state[sock].detect?SS_DETECT:0;

  *status|=state[sock].ready?SS_READY:0;

  /* The power status of individual sockets is not available
   * explicitly from the hardware, so we just remember the state
   * and regurgitate it upon request:
   */
  *status|=pxa_pcmcia_socket[sock].cs_state.Vcc?SS_POWERON:0;

  if(pxa_pcmcia_socket[sock].cs_state.flags&SS_IOCARD)
    *status|=state[sock].bvd1?SS_STSCHG:0;
  else {
    if(state[sock].bvd1==0)
      *status|=SS_BATDEAD;
    else if(state[sock].bvd2==0)
      *status|=SS_BATWARN;
  }

  *status|=state[sock].vs_3v?SS_3VCARD:0;

  *status|=state[sock].vs_Xv?SS_XVCARD:0;

  DEBUG(3, "\tstatus: %s%s%s%s%s%s%s%s\n",
	(*status&SS_DETECT)?"DETECT ":"",
	(*status&SS_READY)?"READY ":"", 
	(*status&SS_BATDEAD)?"BATDEAD ":"",
	(*status&SS_BATWARN)?"BATWARN ":"",
	(*status&SS_POWERON)?"POWERON ":"",
	(*status&SS_STSCHG)?"STSCHG ":"",
	(*status&SS_3VCARD)?"3VCARD ":"",
	(*status&SS_XVCARD)?"XVCARD ":"");

  return 0;

}  /* pxa_pcmcia_get_status() */


/* pxa_pcmcia_get_socket()
 * ^^^^^^^^^^^^^^^^^^^^^^^^^^
 * Implements the get_socket() operation for the in-kernel PCMCIA
 * service (formerly SS_GetSocket in Card Services). Not a very 
 * exciting routine.
 *
 * Returns: 0
 */
static int pxa_pcmcia_get_socket(unsigned int sock,
				    socket_state_t *state){

  DEBUG(3, "%s() for sock %u\n", __FUNCTION__, sock);

  /* This information was given to us in an earlier call to set_socket(),
   * so we're just regurgitating it here:
   */
  *state=pxa_pcmcia_socket[sock].cs_state;

  return 0;
}


/* pxa_pcmcia_set_socket()
 * ^^^^^^^^^^^^^^^^^^^^^^^^^^
 * Implements the set_socket() operation for the in-kernel PCMCIA
 * service (formerly SS_SetSocket in Card Services). We more or
 * less punt all of this work and let the kernel handle the details
 * of power configuration, reset, &c. We also record the value of
 * `state' in order to regurgitate it to the PCMCIA core later.
 *
 * Returns: 0
 */
static int pxa_pcmcia_set_socket(unsigned int sock,
				    socket_state_t *state){
  struct pcmcia_configure configure;

  DEBUG(3, "%s() for sock %u\n", __FUNCTION__, sock);

  DEBUG(3, "\tmask:  %s%s%s%s%s%s\n\tflags: %s%s%s%s%s%s\n"
	"\tVcc %d  Vpp %d  irq %d\n",
	(state->csc_mask==0)?"<NONE>":"",
	(state->csc_mask&SS_DETECT)?"DETECT ":"",
	(state->csc_mask&SS_READY)?"READY ":"",
	(state->csc_mask&SS_BATDEAD)?"BATDEAD ":"",
	(state->csc_mask&SS_BATWARN)?"BATWARN ":"",
	(state->csc_mask&SS_STSCHG)?"STSCHG ":"",
	(state->flags==0)?"<NONE>":"",
	(state->flags&SS_PWR_AUTO)?"PWR_AUTO ":"",
	(state->flags&SS_IOCARD)?"IOCARD ":"",
	(state->flags&SS_RESET)?"RESET ":"",
	(state->flags&SS_SPKR_ENA)?"SPKR_ENA ":"",
	(state->flags&SS_OUTPUT_ENA)?"OUTPUT_ENA ":"",
	state->Vcc, state->Vpp, state->io_irq);

  configure.sock=sock;
  configure.vcc=state->Vcc;
  configure.vpp=state->Vpp;
  configure.output=(state->flags&SS_OUTPUT_ENA)?1:0;
  configure.speaker=(state->flags&SS_SPKR_ENA)?1:0;
  configure.reset=(state->flags&SS_RESET)?1:0;

  if(pcmcia_low_level->configure_socket(&configure)<0){
    printk(KERN_ERR "Unable to configure socket %u\n", sock);
    return -1;
  }

  pxa_pcmcia_socket[sock].cs_state=*state;
  
  return 0;

}  /* pxa_pcmcia_set_socket() */


/* pxa_pcmcia_get_io_map()
 * ^^^^^^^^^^^^^^^^^^^^^^^^^^
 * Implements the get_io_map() operation for the in-kernel PCMCIA
 * service (formerly SS_GetIOMap in Card Services). Just returns an
 * I/O map descriptor which was assigned earlier by a set_io_map().
 *
 * Returns: 0 on success, -1 if the map index was out of range
 */
static int pxa_pcmcia_get_io_map(unsigned int sock,
				    struct pccard_io_map *map){

  DEBUG(4, "%s() for sock %u\n", __FUNCTION__, sock);

  if(map->map>=MAX_IO_WIN){
    printk(KERN_ERR "%s(): map (%d) out of range\n", __FUNCTION__,
	   map->map);
    return -1;
  }

  *map=pxa_pcmcia_socket[sock].io_map[map->map];

  return 0;
}


/* pxa_pcmcia_set_io_map()
 * ^^^^^^^^^^^^^^^^^^^^^^^^^^
 * Implements the set_io_map() operation for the in-kernel PCMCIA
 * service (formerly SS_SetIOMap in Card Services). We configure
 * the map speed as requested, but override the address ranges
 * supplied by Card Services.
 *
 * Returns: 0 on success, -1 on error
 */
static int pxa_pcmcia_set_io_map(unsigned int sock,
				    struct pccard_io_map *map){
  unsigned int clock, speed;
  unsigned long mecr, start;

  DEBUG(4, "%s() for sock %u\n", __FUNCTION__, sock);

  DEBUG(4, "\tmap %u  speed %u\n\tstart 0x%08lx  stop 0x%08lx\n"
	"\tflags: %s%s%s%s%s%s%s%s\n",
	map->map, map->speed, map->start, map->stop,
	(map->flags==0)?"<NONE>":"",
	(map->flags&MAP_ACTIVE)?"ACTIVE ":"",
	(map->flags&MAP_16BIT)?"16BIT ":"",
	(map->flags&MAP_AUTOSZ)?"AUTOSZ ":"",
	(map->flags&MAP_0WS)?"0WS ":"",
	(map->flags&MAP_WRPROT)?"WRPROT ":"",
	(map->flags&MAP_USE_WAIT)?"USE_WAIT ":"",
	(map->flags&MAP_PREFETCH)?"PREFETCH ":"");

  if(map->map>=MAX_IO_WIN){
    printk(KERN_ERR "%s(): map (%d) out of range\n", __FUNCTION__,
	   map->map);
    return -1;
  }

  if(map->flags&MAP_ACTIVE){

    speed=(map->speed>0)?map->speed:PXA_PCMCIA_IO_ACCESS;

    clock = get_lclk_frequency_10khz();

    pxa_pcmcia_socket[sock].speed_io=speed;

    if (sock == 0) {
      MCIO0 = ((pxa_mcxx_setup(speed, clock)
			& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
            | ((pxa_mcxx_asst(speed, clock)
			& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
            | ((pxa_mcxx_hold(speed, clock)
			& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
    } else {
      MCIO1 = ((pxa_mcxx_setup(speed, clock)
			& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
            | ((pxa_mcxx_asst(speed, clock)
			& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
            | ((pxa_mcxx_hold(speed, clock)
			& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
    }

    DEBUG(4, "%s(): FAST%u %lx  BSM%u %lx  BSA%u %lx  BSIO%u %lx\n",
	  __FUNCTION__, sock, MECR_FAST_GET(mecr, sock), sock,
	  MECR_BSM_GET(mecr, sock), sock, MECR_BSA_GET(mecr, sock), 
	  sock, MECR_BSIO_GET(mecr, sock));

  }

  start=map->start;

  if(map->stop==1)
    map->stop=PAGE_SIZE-1;

  map->start=pxa_pcmcia_socket[sock].virt_io;
  map->stop=map->start+(map->stop-start);

  pxa_pcmcia_socket[sock].io_map[map->map]=*map;

  return 0;

}  /* pxa_pcmcia_set_io_map() */


/* pxa_pcmcia_get_mem_map()
 * ^^^^^^^^^^^^^^^^^^^^^^^^^^^
 * Implements the get_mem_map() operation for the in-kernel PCMCIA
 * service (formerly SS_GetMemMap in Card Services). Just returns a
 *  memory map descriptor which was assigned earlier by a
 *  set_mem_map() request.
 *
 * Returns: 0 on success, -1 if the map index was out of range
 */
static int pxa_pcmcia_get_mem_map(unsigned int sock,
				     struct pccard_mem_map *map){

  DEBUG(4, "%s() for sock %u\n", __FUNCTION__, sock);

  if(map->map>=MAX_WIN){
    printk(KERN_ERR "%s(): map (%d) out of range\n", __FUNCTION__,
	   map->map);
    return -1;
  }

  *map=pxa_pcmcia_socket[sock].mem_map[map->map];

  return 0;
}


/* pxa_pcmcia_set_mem_map()
 * ^^^^^^^^^^^^^^^^^^^^^^^^^^^
 * Implements the set_mem_map() operation for the in-kernel PCMCIA
 * service (formerly SS_SetMemMap in Card Services). We configure
 * the map speed as requested, but override the address ranges
 * supplied by Card Services.
 *
 * Returns: 0 on success, -1 on error
 */
static int pxa_pcmcia_set_mem_map(unsigned int sock,
				     struct pccard_mem_map *map){
  unsigned int clock, speed;
  unsigned long mecr, start;

  DEBUG(4, "%s() for sock %u\n", __FUNCTION__, sock);

  DEBUG(4, "\tmap %u  speed %u\n\tsys_start  %#lx\n"
	"\tsys_stop   %#lx\n\tcard_start %#x\n"
	"\tflags: %s%s%s%s%s%s%s%s\n",
	map->map, map->speed, map->sys_start, map->sys_stop,
	map->card_start, (map->flags==0)?"<NONE>":"",
	(map->flags&MAP_ACTIVE)?"ACTIVE ":"",
	(map->flags&MAP_16BIT)?"16BIT ":"",
	(map->flags&MAP_AUTOSZ)?"AUTOSZ ":"",
	(map->flags&MAP_0WS)?"0WS ":"",
	(map->flags&MAP_WRPROT)?"WRPROT ":"",
	(map->flags&MAP_ATTRIB)?"ATTRIB ":"",
	(map->flags&MAP_USE_WAIT)?"USE_WAIT ":"");

  if(map->map>=MAX_WIN){
    printk(KERN_ERR "%s(): map (%d) out of range\n", __FUNCTION__,
	   map->map);
    return -1;
  }

  if(map->flags&MAP_ACTIVE){
    /* When clients issue RequestMap, the access speed is not always
     * properly configured:
     */
    if(map->speed > 0)
      speed = map->speed;
    else
      switch(pxa_pcmcia_socket[sock].cs_state.Vcc){
      case 33:
	speed = PXA_PCMCIA_3V_MEM_ACCESS;
	break;
      default:
	speed = PXA_PCMCIA_5V_MEM_ACCESS;
      }

    clock = get_lclk_frequency_10khz();

    if(map->flags&MAP_ATTRIB){
      if (sock == 0) {
        MCATT0 = ((pxa_mcxx_setup(speed, clock)
			& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
               | ((pxa_mcxx_asst(speed, clock)
			& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
               | ((pxa_mcxx_hold(speed, clock)
			& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
      } else {
        MCATT1 = ((pxa_mcxx_setup(speed, clock)
			& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
               | ((pxa_mcxx_asst(speed, clock)
			& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
               | ((pxa_mcxx_hold(speed, clock)
			& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
      }
      pxa_pcmcia_socket[sock].speed_attr=speed;
    } else {
      if (sock == 0) {
        MCMEM0 = ((pxa_mcxx_setup(speed, clock)
			& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
               | ((pxa_mcxx_asst(speed, clock)
			& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
               | ((pxa_mcxx_hold(speed, clock)
			& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
      } else {
        MCMEM1 = ((pxa_mcxx_setup(speed, clock)
			& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
               | ((pxa_mcxx_asst(speed, clock)
			& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
               | ((pxa_mcxx_hold(speed, clock)
			& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
      }
      pxa_pcmcia_socket[sock].speed_mem=speed;
    }
    DEBUG(4, "%s(): FAST%u %lx  BSM%u %lx  BSA%u %lx  BSIO%u %lx\n",
	  __FUNCTION__, sock, MECR_FAST_GET(mecr, sock), sock,
	  MECR_BSM_GET(mecr, sock), sock, MECR_BSA_GET(mecr, sock), 
	  sock, MECR_BSIO_GET(mecr, sock));
  }

  start=map->sys_start;

  if(map->sys_stop==0)
    map->sys_stop=PAGE_SIZE-1;

  map->sys_start=(map->flags & MAP_ATTRIB)?\
    pxa_pcmcia_socket[sock].phys_attr:\
    pxa_pcmcia_socket[sock].phys_mem;

  map->sys_stop=map->sys_start+(map->sys_stop-start);

  pxa_pcmcia_socket[sock].mem_map[map->map]=*map;

  return 0;

}  /* pxa_pcmcia_set_mem_map() */


#if defined(CONFIG_PROC_FS)

/* pxa_pcmcia_proc_setup()
 * ^^^^^^^^^^^^^^^^^^^^^^^^^^
 * Implements the proc_setup() operation for the in-kernel PCMCIA
 * service (formerly SS_ProcSetup in Card Services).
 *
 * Returns: 0 on success, -1 on error
 */
static void pxa_pcmcia_proc_setup(unsigned int sock,
				     struct proc_dir_entry *base){
  struct proc_dir_entry *entry;

  DEBUG(4, "%s() for sock %u\n", __FUNCTION__, sock);

  if((entry=create_proc_entry("status", 0, base))==NULL){
    printk(KERN_ERR "Unable to install \"status\" procfs entry\n");
    return;
  }

  entry->read_proc=pxa_pcmcia_proc_status;
  entry->data=(void *)sock;
}


/* pxa_pcmcia_proc_status()
 * ^^^^^^^^^^^^^^^^^^^^^^^^^^^
 * Implements the /proc/bus/pccard/??/status file.
 *
 * Returns: the number of characters added to the buffer
 */
static int pxa_pcmcia_proc_status(char *buf, char **start, off_t pos,
				     int count, int *eof, void *data){
  char *p=buf;
  unsigned int sock=(unsigned int)data;
  unsigned int clock = get_lclk_frequency_10khz();
  unsigned long mecr = MECR;

  p+=sprintf(p, "k_flags  : %s%s%s%s%s%s%s\n", 
	     pxa_pcmcia_socket[sock].k_state.detect?"detect ":"",
	     pxa_pcmcia_socket[sock].k_state.ready?"ready ":"",
	     pxa_pcmcia_socket[sock].k_state.bvd1?"bvd1 ":"",
	     pxa_pcmcia_socket[sock].k_state.bvd2?"bvd2 ":"",
	     pxa_pcmcia_socket[sock].k_state.wrprot?"wrprot ":"",
	     pxa_pcmcia_socket[sock].k_state.vs_3v?"vs_3v ":"",
	     pxa_pcmcia_socket[sock].k_state.vs_Xv?"vs_Xv ":"");

  p+=sprintf(p, "status   : %s%s%s%s%s%s%s%s%s\n",
	     pxa_pcmcia_socket[sock].k_state.detect?"SS_DETECT ":"",
	     pxa_pcmcia_socket[sock].k_state.ready?"SS_READY ":"",
	     pxa_pcmcia_socket[sock].cs_state.Vcc?"SS_POWERON ":"",
	     pxa_pcmcia_socket[sock].cs_state.flags&SS_IOCARD?\
	     "SS_IOCARD ":"",
	     (pxa_pcmcia_socket[sock].cs_state.flags&SS_IOCARD &&
	      pxa_pcmcia_socket[sock].k_state.bvd1)?"SS_STSCHG ":"",
	     ((pxa_pcmcia_socket[sock].cs_state.flags&SS_IOCARD)==0 &&
	      (pxa_pcmcia_socket[sock].k_state.bvd1==0))?"SS_BATDEAD ":"",
	     ((pxa_pcmcia_socket[sock].cs_state.flags&SS_IOCARD)==0 &&
	      (pxa_pcmcia_socket[sock].k_state.bvd2==0))?"SS_BATWARN ":"",
	     pxa_pcmcia_socket[sock].k_state.vs_3v?"SS_3VCARD ":"",
	     pxa_pcmcia_socket[sock].k_state.vs_Xv?"SS_XVCARD ":"");

  p+=sprintf(p, "mask     : %s%s%s%s%s\n",
	     pxa_pcmcia_socket[sock].cs_state.csc_mask&SS_DETECT?\
	     "SS_DETECT ":"",
	     pxa_pcmcia_socket[sock].cs_state.csc_mask&SS_READY?\
	     "SS_READY ":"",
	     pxa_pcmcia_socket[sock].cs_state.csc_mask&SS_BATDEAD?\
	     "SS_BATDEAD ":"",
	     pxa_pcmcia_socket[sock].cs_state.csc_mask&SS_BATWARN?\
	     "SS_BATWARN ":"",
	     pxa_pcmcia_socket[sock].cs_state.csc_mask&SS_STSCHG?\
	     "SS_STSCHG ":"");

  p+=sprintf(p, "cs_flags : %s%s%s%s%s\n",
	     pxa_pcmcia_socket[sock].cs_state.flags&SS_PWR_AUTO?\
	     "SS_PWR_AUTO ":"",
	     pxa_pcmcia_socket[sock].cs_state.flags&SS_IOCARD?\
	     "SS_IOCARD ":"",
	     pxa_pcmcia_socket[sock].cs_state.flags&SS_RESET?\
	     "SS_RESET ":"",
	     pxa_pcmcia_socket[sock].cs_state.flags&SS_SPKR_ENA?\
	     "SS_SPKR_ENA ":"",
	     pxa_pcmcia_socket[sock].cs_state.flags&SS_OUTPUT_ENA?\
	     "SS_OUTPUT_ENA ":"");

  p+=sprintf(p, "Vcc      : %d\n", pxa_pcmcia_socket[sock].cs_state.Vcc);

  p+=sprintf(p, "Vpp      : %d\n", pxa_pcmcia_socket[sock].cs_state.Vpp);

  p+=sprintf(p, "irq      : %d\n", pxa_pcmcia_socket[sock].cs_state.io_irq);

  p+=sprintf(p, "I/O      : %u (%u)\n", pxa_pcmcia_socket[sock].speed_io,
             sock ?
               pxa_pcmcia_cmd_time(clock,
		((MCIO1 >> MCXX_ASST_SHIFT) & MCXX_ASST_MASK)) :
               pxa_pcmcia_cmd_time(clock,
		((MCIO0 >> MCXX_ASST_SHIFT) & MCXX_ASST_MASK)));

  p+=sprintf(p, "attribute: %u (%u)\n", pxa_pcmcia_socket[sock].speed_attr,
             sock ?
               pxa_pcmcia_cmd_time(clock,
		((MCATT1 >> MCXX_ASST_SHIFT) & MCXX_ASST_MASK)) :
               pxa_pcmcia_cmd_time(clock,
		((MCATT0 >> MCXX_ASST_SHIFT) & MCXX_ASST_MASK)));

  p+=sprintf(p, "common   : %u (%u)\n", pxa_pcmcia_socket[sock].speed_mem,
             sock ?
               pxa_pcmcia_cmd_time(clock,
		((MCMEM1 >> MCXX_ASST_SHIFT) & MCXX_ASST_MASK)) :
               pxa_pcmcia_cmd_time(clock,
		((MCMEM0 >> MCXX_ASST_SHIFT) & MCXX_ASST_MASK)));

  return p-buf;
}

#endif  /* defined(CONFIG_PROC_FS) */


#ifdef CONFIG_CPU_FREQ

/* pxa_pcmcia_update_mecr()
 * ^^^^^^^^^^^^^^^^^^^^^^^^^^^
 * When pxa_pcmcia_notifier() decides that a MECR adjustment (due
 * to a core clock frequency change) is needed, this routine establishes
 * new BS_xx values consistent with the clock speed `clock'.
 */
static void pxa_pcmcia_update_mecr(unsigned int clock){
  unsigned int sock;

  for(sock = 0; sock < PXA_PCMCIA_MAX_SOCK; ++sock){

    // REVISIT: MCXX macros needed here
    // MECR_BSIO_SET(mecr, sock,
// 		  pxa_pcmcia_mecr_bs(pxa_pcmcia_socket[sock].speed_io,
// 					clock));
    // MECR_BSA_SET(mecr, sock,
// 		 pxa_pcmcia_mecr_bs(pxa_pcmcia_socket[sock].speed_attr,
// 				       clock));
    // MECR_BSM_SET(mecr, sock,
// 		 pxa_pcmcia_mecr_bs(pxa_pcmcia_socket[sock].speed_mem,
// 				       clock));
  }
}

/* pxa_pcmcia_notifier()
 * ^^^^^^^^^^^^^^^^^^^^^^^^
 * When changing the processor core clock frequency, it is necessary
 * to adjust the MECR timings accordingly. We've recorded the timings
 * requested by Card Services, so this is just a matter of finding
 * out what our current speed is, and then recomputing the new MECR
 * values.
 *
 * Returns: 0 on success, -1 on error
 */
static int pxa_pcmcia_notifier(struct notifier_block *nb,
				  unsigned long val, void *data){
  struct cpufreq_info *ci = data;

  switch(val){
  case CPUFREQ_MINMAX:

    break;

  case CPUFREQ_PRECHANGE:

    if(ci->new_freq > ci->old_freq){
      DEBUG(2, "%s(): new frequency %u.%uMHz > %u.%uMHz, pre-updating\n",
	    __FUNCTION__,
	    ci->new_freq / 1000, (ci->new_freq / 100) % 10,
	    ci->old_freq / 1000, (ci->old_freq / 100) % 10);
      pxa_pcmcia_update_mecr(ci->new_freq);
    }

    break;

  case CPUFREQ_POSTCHANGE:

    if(ci->new_freq < ci->old_freq){
      DEBUG(2, "%s(): new frequency %u.%uMHz < %u.%uMHz, post-updating\n",
	    __FUNCTION__,
	    ci->new_freq / 1000, (ci->new_freq / 100) % 10,
	    ci->old_freq / 1000, (ci->old_freq / 100) % 10);
      pxa_pcmcia_update_mecr(ci->new_freq);
    }

    break;

  default:
    printk(KERN_ERR "%s(): unknown CPU frequency event %lx\n", __FUNCTION__,
	   val);
    return -1;

  }

  return 0;

}

static struct notifier_block pxa_pcmcia_notifier_block = {
  notifier_call: pxa_pcmcia_notifier
};

#endif