/* * QLogic ISP2x00 SCSI-FCP * Written by Erik H. Moe, ehm@cris.com * Copyright 1995, Erik H. Moe * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2, or (at your option) any * later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. */ /* Renamed and updated to 1.3.x by Michael Griffith */ /* This is a version of the isp1020 driver which was modified by * Chris Loveland to support the isp2100 and isp2200 * * Big endian support and dynamic DMA mapping added * by Jakub Jelinek . * * Conversion to final pci64 DMA interfaces * by David S. Miller . */ /* * $Date: 2003/06/23 22:18:33 $ * $Revision: 1.1.1.1 $ * * $Log: qlogicfc.c,v $ * Revision 1.1.1.1 2003/06/23 22:18:33 jharrell * Imported kernel sources * * Revision 0.5 1995/09/22 02:23:15 root * do auto request sense * * Revision 0.4 1995/08/07 04:44:33 root * supply firmware with driver. * numerous bug fixes/general cleanup of code. * * Revision 0.3 1995/07/16 16:15:39 root * added reset/abort code. * * Revision 0.2 1995/06/29 03:14:19 root * fixed biosparam. * added queue protocol. * * Revision 0.1 1995/06/25 01:55:45 root * Initial release. * */ #include #include #include #include #include #include #include #include #include #include #include #include #include "sd.h" #include "hosts.h" #define pci64_dma_hi32(a) ((u32) (0xffffffff & (((u64)(a))>>32))) #define pci64_dma_lo32(a) ((u32) (0xffffffff & (((u64)(a))))) #define pci64_dma_build(hi,lo) \ ((dma_addr_t)(((u64)(lo))|(((u64)(hi))<<32))) #include "qlogicfc.h" /* Configuration section **************************************************** */ /* Set the following macro to 1 to reload the ISP2x00's firmware. This is version 1.17.30 of the isp2100's firmware and version 2.00.40 of the isp2200's firmware. */ #define USE_NVRAM_DEFAULTS 1 #define ISP2x00_PORTDB 1 /* Set the following to 1 to include fabric support, fabric support is * currently not as well tested as the other aspects of the driver */ #define ISP2x00_FABRIC 1 /* Macros used for debugging */ #define DEBUG_ISP2x00 0 #define DEBUG_ISP2x00_INT 0 #define DEBUG_ISP2x00_INTR 0 #define DEBUG_ISP2x00_SETUP 0 #define DEBUG_ISP2x00_FABRIC 0 #define TRACE_ISP 0 #define DEFAULT_LOOP_COUNT 1000000000 /* End Configuration section ************************************************ */ #include #if TRACE_ISP #define TRACE_BUF_LEN (32*1024) struct { u_long next; struct { u_long time; u_int index; u_int addr; u_char *name; } buf[TRACE_BUF_LEN]; } trace; #define TRACE(w, i, a) \ { \ unsigned long flags; \ \ save_flags(flags); \ cli(); \ trace.buf[trace.next].name = (w); \ trace.buf[trace.next].time = jiffies; \ trace.buf[trace.next].index = (i); \ trace.buf[trace.next].addr = (long) (a); \ trace.next = (trace.next + 1) & (TRACE_BUF_LEN - 1); \ restore_flags(flags); \ } #else #define TRACE(w, i, a) #endif #if DEBUG_ISP2x00_FABRIC #define DEBUG_FABRIC(x) x #else #define DEBUG_FABRIC(x) #endif /* DEBUG_ISP2x00_FABRIC */ #if DEBUG_ISP2x00 #define ENTER(x) printk("isp2x00 : entering %s()\n", x); #define LEAVE(x) printk("isp2x00 : leaving %s()\n", x); #define DEBUG(x) x #else #define ENTER(x) #define LEAVE(x) #define DEBUG(x) #endif /* DEBUG_ISP2x00 */ #if DEBUG_ISP2x00_INTR #define ENTER_INTR(x) printk("isp2x00 : entering %s()\n", x); #define LEAVE_INTR(x) printk("isp2x00 : leaving %s()\n", x); #define DEBUG_INTR(x) x #else #define ENTER_INTR(x) #define LEAVE_INTR(x) #define DEBUG_INTR(x) #endif /* DEBUG ISP2x00_INTR */ #define ISP2100_REV_ID1 1 #define ISP2100_REV_ID3 3 #define ISP2200_REV_ID5 5 /* host configuration and control registers */ #define HOST_HCCR 0xc0 /* host command and control */ /* pci bus interface registers */ #define FLASH_BIOS_ADDR 0x00 #define FLASH_BIOS_DATA 0x02 #define ISP_CTRL_STATUS 0x06 /* configuration register #1 */ #define PCI_INTER_CTL 0x08 /* pci interrupt control */ #define PCI_INTER_STS 0x0a /* pci interrupt status */ #define PCI_SEMAPHORE 0x0c /* pci semaphore */ #define PCI_NVRAM 0x0e /* pci nvram interface */ /* mailbox registers */ #define MBOX0 0x10 /* mailbox 0 */ #define MBOX1 0x12 /* mailbox 1 */ #define MBOX2 0x14 /* mailbox 2 */ #define MBOX3 0x16 /* mailbox 3 */ #define MBOX4 0x18 /* mailbox 4 */ #define MBOX5 0x1a /* mailbox 5 */ #define MBOX6 0x1c /* mailbox 6 */ #define MBOX7 0x1e /* mailbox 7 */ /* mailbox command complete status codes */ #define MBOX_COMMAND_COMPLETE 0x4000 #define INVALID_COMMAND 0x4001 #define HOST_INTERFACE_ERROR 0x4002 #define TEST_FAILED 0x4003 #define COMMAND_ERROR 0x4005 #define COMMAND_PARAM_ERROR 0x4006 #define PORT_ID_USED 0x4007 #define LOOP_ID_USED 0x4008 #define ALL_IDS_USED 0x4009 /* async event status codes */ #define RESET_DETECTED 0x8001 #define SYSTEM_ERROR 0x8002 #define REQUEST_TRANSFER_ERROR 0x8003 #define RESPONSE_TRANSFER_ERROR 0x8004 #define REQUEST_QUEUE_WAKEUP 0x8005 #define LIP_OCCURRED 0x8010 #define LOOP_UP 0x8011 #define LOOP_DOWN 0x8012 #define LIP_RECEIVED 0x8013 #define PORT_DB_CHANGED 0x8014 #define CHANGE_NOTIFICATION 0x8015 #define SCSI_COMMAND_COMPLETE 0x8020 #define POINT_TO_POINT_UP 0x8030 #define CONNECTION_MODE 0x8036 struct Entry_header { u_char entry_type; u_char entry_cnt; u_char sys_def_1; u_char flags; }; /* entry header type commands */ #define ENTRY_COMMAND 0x19 #define ENTRY_CONTINUATION 0x0a #define ENTRY_STATUS 0x03 #define ENTRY_MARKER 0x04 /* entry header flag definitions */ #define EFLAG_BUSY 2 #define EFLAG_BAD_HEADER 4 #define EFLAG_BAD_PAYLOAD 8 struct dataseg { u_int d_base; u_int d_base_hi; u_int d_count; }; struct Command_Entry { struct Entry_header hdr; u_int handle; u_char target_lun; u_char target_id; u_short expanded_lun; u_short control_flags; u_short rsvd2; u_short time_out; u_short segment_cnt; u_char cdb[16]; u_int total_byte_cnt; struct dataseg dataseg[DATASEGS_PER_COMMAND]; }; /* command entry control flag definitions */ #define CFLAG_NODISC 0x01 #define CFLAG_HEAD_TAG 0x02 #define CFLAG_ORDERED_TAG 0x04 #define CFLAG_SIMPLE_TAG 0x08 #define CFLAG_TAR_RTN 0x10 #define CFLAG_READ 0x20 #define CFLAG_WRITE 0x40 struct Continuation_Entry { struct Entry_header hdr; struct dataseg dataseg[DATASEGS_PER_CONT]; }; struct Marker_Entry { struct Entry_header hdr; u_int reserved; u_char target_lun; u_char target_id; u_char modifier; u_char expanded_lun; u_char rsvds[52]; }; /* marker entry modifier definitions */ #define SYNC_DEVICE 0 #define SYNC_TARGET 1 #define SYNC_ALL 2 struct Status_Entry { struct Entry_header hdr; u_int handle; u_short scsi_status; u_short completion_status; u_short state_flags; u_short status_flags; u_short res_info_len; u_short req_sense_len; u_int residual; u_char res_info[8]; u_char req_sense_data[32]; }; /* status entry completion status definitions */ #define CS_COMPLETE 0x0000 #define CS_DMA_ERROR 0x0002 #define CS_RESET_OCCURRED 0x0004 #define CS_ABORTED 0x0005 #define CS_TIMEOUT 0x0006 #define CS_DATA_OVERRUN 0x0007 #define CS_DATA_UNDERRUN 0x0015 #define CS_QUEUE_FULL 0x001c #define CS_PORT_UNAVAILABLE 0x0028 #define CS_PORT_LOGGED_OUT 0x0029 #define CS_PORT_CONFIG_CHANGED 0x002a /* status entry state flag definitions */ #define SF_SENT_CDB 0x0400 #define SF_TRANSFERRED_DATA 0x0800 #define SF_GOT_STATUS 0x1000 /* status entry status flag definitions */ #define STF_BUS_RESET 0x0008 #define STF_DEVICE_RESET 0x0010 #define STF_ABORTED 0x0020 #define STF_TIMEOUT 0x0040 /* interrupt control commands */ #define ISP_EN_INT 0x8000 #define ISP_EN_RISC 0x0008 /* host control commands */ #define HCCR_NOP 0x0000 #define HCCR_RESET 0x1000 #define HCCR_PAUSE 0x2000 #define HCCR_RELEASE 0x3000 #define HCCR_SINGLE_STEP 0x4000 #define HCCR_SET_HOST_INTR 0x5000 #define HCCR_CLEAR_HOST_INTR 0x6000 #define HCCR_CLEAR_RISC_INTR 0x7000 #define HCCR_BP_ENABLE 0x8000 #define HCCR_BIOS_DISABLE 0x9000 #define HCCR_TEST_MODE 0xf000 #define RISC_BUSY 0x0004 /* mailbox commands */ #define MBOX_NO_OP 0x0000 #define MBOX_LOAD_RAM 0x0001 #define MBOX_EXEC_FIRMWARE 0x0002 #define MBOX_DUMP_RAM 0x0003 #define MBOX_WRITE_RAM_WORD 0x0004 #define MBOX_READ_RAM_WORD 0x0005 #define MBOX_MAILBOX_REG_TEST 0x0006 #define MBOX_VERIFY_CHECKSUM 0x0007 #define MBOX_ABOUT_FIRMWARE 0x0008 #define MBOX_LOAD_RISC_RAM 0x0009 #define MBOX_DUMP_RISC_RAM 0x000a #define MBOX_CHECK_FIRMWARE 0x000e #define MBOX_INIT_REQ_QUEUE 0x0010 #define MBOX_INIT_RES_QUEUE 0x0011 #define MBOX_EXECUTE_IOCB 0x0012 #define MBOX_WAKE_UP 0x0013 #define MBOX_STOP_FIRMWARE 0x0014 #define MBOX_ABORT_IOCB 0x0015 #define MBOX_ABORT_DEVICE 0x0016 #define MBOX_ABORT_TARGET 0x0017 #define MBOX_BUS_RESET 0x0018 #define MBOX_STOP_QUEUE 0x0019 #define MBOX_START_QUEUE 0x001a #define MBOX_SINGLE_STEP_QUEUE 0x001b #define MBOX_ABORT_QUEUE 0x001c #define MBOX_GET_DEV_QUEUE_STATUS 0x001d #define MBOX_GET_FIRMWARE_STATUS 0x001f #define MBOX_GET_INIT_SCSI_ID 0x0020 #define MBOX_GET_RETRY_COUNT 0x0022 #define MBOX_GET_TARGET_PARAMS 0x0028 #define MBOX_GET_DEV_QUEUE_PARAMS 0x0029 #define MBOX_SET_RETRY_COUNT 0x0032 #define MBOX_SET_TARGET_PARAMS 0x0038 #define MBOX_SET_DEV_QUEUE_PARAMS 0x0039 #define MBOX_EXECUTE_IOCB64 0x0054 #define MBOX_INIT_FIRMWARE 0x0060 #define MBOX_GET_INIT_CB 0x0061 #define MBOX_INIT_LIP 0x0062 #define MBOX_GET_POS_MAP 0x0063 #define MBOX_GET_PORT_DB 0x0064 #define MBOX_CLEAR_ACA 0x0065 #define MBOX_TARGET_RESET 0x0066 #define MBOX_CLEAR_TASK_SET 0x0067 #define MBOX_ABORT_TASK_SET 0x0068 #define MBOX_GET_FIRMWARE_STATE 0x0069 #define MBOX_GET_PORT_NAME 0x006a #define MBOX_SEND_SNS 0x006e #define MBOX_PORT_LOGIN 0x006f #define MBOX_SEND_CHANGE_REQUEST 0x0070 #define MBOX_PORT_LOGOUT 0x0071 /* * Firmware if needed (note this is a hack, it belongs in a seperate * module. */ #ifdef CONFIG_SCSI_QLOGIC_FC_FIRMWARE #include "qlogicfc_asm.c" #else static unsigned short risc_code_addr01 = 0x1000 ; #endif /* Each element in mbox_param is an 8 bit bitmap where each bit indicates if that mbox should be copied as input. For example 0x2 would mean only copy mbox1. */ const u_char mbox_param[] = { 0x01, /* MBOX_NO_OP */ 0x1f, /* MBOX_LOAD_RAM */ 0x03, /* MBOX_EXEC_FIRMWARE */ 0x1f, /* MBOX_DUMP_RAM */ 0x07, /* MBOX_WRITE_RAM_WORD */ 0x03, /* MBOX_READ_RAM_WORD */ 0xff, /* MBOX_MAILBOX_REG_TEST */ 0x03, /* MBOX_VERIFY_CHECKSUM */ 0x01, /* MBOX_ABOUT_FIRMWARE */ 0xff, /* MBOX_LOAD_RISC_RAM */ 0xff, /* MBOX_DUMP_RISC_RAM */ 0x00, /* 0x000b */ 0x00, /* 0x000c */ 0x00, /* 0x000d */ 0x01, /* MBOX_CHECK_FIRMWARE */ 0x00, /* 0x000f */ 0x1f, /* MBOX_INIT_REQ_QUEUE */ 0x2f, /* MBOX_INIT_RES_QUEUE */ 0x0f, /* MBOX_EXECUTE_IOCB */ 0x03, /* MBOX_WAKE_UP */ 0x01, /* MBOX_STOP_FIRMWARE */ 0x0f, /* MBOX_ABORT_IOCB */ 0x03, /* MBOX_ABORT_DEVICE */ 0x07, /* MBOX_ABORT_TARGET */ 0x03, /* MBOX_BUS_RESET */ 0x03, /* MBOX_STOP_QUEUE */ 0x03, /* MBOX_START_QUEUE */ 0x03, /* MBOX_SINGLE_STEP_QUEUE */ 0x03, /* MBOX_ABORT_QUEUE */ 0x03, /* MBOX_GET_DEV_QUEUE_STATUS */ 0x00, /* 0x001e */ 0x01, /* MBOX_GET_FIRMWARE_STATUS */ 0x01, /* MBOX_GET_INIT_SCSI_ID */ 0x00, /* 0x0021 */ 0x01, /* MBOX_GET_RETRY_COUNT */ 0x00, /* 0x0023 */ 0x00, /* 0x0024 */ 0x00, /* 0x0025 */ 0x00, /* 0x0026 */ 0x00, /* 0x0027 */ 0x03, /* MBOX_GET_TARGET_PARAMS */ 0x03, /* MBOX_GET_DEV_QUEUE_PARAMS */ 0x00, /* 0x002a */ 0x00, /* 0x002b */ 0x00, /* 0x002c */ 0x00, /* 0x002d */ 0x00, /* 0x002e */ 0x00, /* 0x002f */ 0x00, /* 0x0030 */ 0x00, /* 0x0031 */ 0x07, /* MBOX_SET_RETRY_COUNT */ 0x00, /* 0x0033 */ 0x00, /* 0x0034 */ 0x00, /* 0x0035 */ 0x00, /* 0x0036 */ 0x00, /* 0x0037 */ 0x0f, /* MBOX_SET_TARGET_PARAMS */ 0x0f, /* MBOX_SET_DEV_QUEUE_PARAMS */ 0x00, /* 0x003a */ 0x00, /* 0x003b */ 0x00, /* 0x003c */ 0x00, /* 0x003d */ 0x00, /* 0x003e */ 0x00, /* 0x003f */ 0x00, /* 0x0040 */ 0x00, /* 0x0041 */ 0x00, /* 0x0042 */ 0x00, /* 0x0043 */ 0x00, /* 0x0044 */ 0x00, /* 0x0045 */ 0x00, /* 0x0046 */ 0x00, /* 0x0047 */ 0x00, /* 0x0048 */ 0x00, /* 0x0049 */ 0x00, /* 0x004a */ 0x00, /* 0x004b */ 0x00, /* 0x004c */ 0x00, /* 0x004d */ 0x00, /* 0x004e */ 0x00, /* 0x004f */ 0x00, /* 0x0050 */ 0x00, /* 0x0051 */ 0x00, /* 0x0052 */ 0x00, /* 0x0053 */ 0xcf, /* MBOX_EXECUTE_IOCB64 */ 0x00, /* 0x0055 */ 0x00, /* 0x0056 */ 0x00, /* 0x0057 */ 0x00, /* 0x0058 */ 0x00, /* 0x0059 */ 0x00, /* 0x005a */ 0x00, /* 0x005b */ 0x00, /* 0x005c */ 0x00, /* 0x005d */ 0x00, /* 0x005e */ 0x00, /* 0x005f */ 0xff, /* MBOX_INIT_FIRMWARE */ 0xcd, /* MBOX_GET_INIT_CB */ 0x01, /* MBOX_INIT_LIP */ 0xcd, /* MBOX_GET_POS_MAP */ 0xcf, /* MBOX_GET_PORT_DB */ 0x03, /* MBOX_CLEAR_ACA */ 0x03, /* MBOX_TARGET_RESET */ 0x03, /* MBOX_CLEAR_TASK_SET */ 0x03, /* MBOX_ABORT_TASK_SET */ 0x01, /* MBOX_GET_FIRMWARE_STATE */ 0x03, /* MBOX_GET_PORT_NAME */ 0x00, /* 0x006b */ 0x00, /* 0x006c */ 0x00, /* 0x006d */ 0xcf, /* MBOX_SEND_SNS */ 0x0f, /* MBOX_PORT_LOGIN */ 0x03, /* MBOX_SEND_CHANGE_REQUEST */ 0x03, /* MBOX_PORT_LOGOUT */ }; #define MAX_MBOX_COMMAND (sizeof(mbox_param)/sizeof(u_short)) struct id_name_map { u64 wwn; u_char loop_id; }; struct sns_cb { u_short len; u_short res1; u_int response_low; u_int response_high; u_short sub_len; u_short res2; u_char data[44]; }; /* address of instance of this struct is passed to adapter to initialize things */ struct init_cb { u_char version; u_char reseverd1[1]; u_short firm_opts; u_short max_frame_len; u_short max_iocb; u_short exec_throttle; u_char retry_cnt; u_char retry_delay; u_short node_name[4]; u_short hard_addr; u_char reserved2[10]; u_short req_queue_out; u_short res_queue_in; u_short req_queue_len; u_short res_queue_len; u_int req_queue_addr_lo; u_int req_queue_addr_high; u_int res_queue_addr_lo; u_int res_queue_addr_high; /* the rest of this structure only applies to the isp2200 */ u_short lun_enables; u_char cmd_resource_cnt; u_char notify_resource_cnt; u_short timeout; u_short reserved3; u_short add_firm_opts; u_char res_accum_timer; u_char irq_delay_timer; u_short special_options; u_short reserved4[13]; }; /* * The result queue can be quite a bit smaller since continuation entries * do not show up there: */ #define RES_QUEUE_LEN ((QLOGICFC_REQ_QUEUE_LEN + 1) / 8 - 1) #define QUEUE_ENTRY_LEN 64 #if ISP2x00_FABRIC #define QLOGICFC_MAX_ID 0xff #else #define QLOGICFC_MAX_ID 0x7d #endif #define QLOGICFC_MAX_LUN 128 #define QLOGICFC_MAX_LOOP_ID 0x7d /* the following connection options only apply to the 2200. i have only * had success with LOOP_ONLY and P2P_ONLY. */ #define LOOP_ONLY 0 #define P2P_ONLY 1 #define LOOP_PREFERED 2 #define P2P_PREFERED 3 #define CONNECTION_PREFERENCE LOOP_ONLY /* adapter_state values */ #define AS_FIRMWARE_DEAD -1 #define AS_LOOP_DOWN 0 #define AS_LOOP_GOOD 1 #define AS_REDO_FABRIC_PORTDB 2 #define AS_REDO_LOOP_PORTDB 4 #define RES_SIZE ((RES_QUEUE_LEN + 1)*QUEUE_ENTRY_LEN) #define REQ_SIZE ((QLOGICFC_REQ_QUEUE_LEN + 1)*QUEUE_ENTRY_LEN) struct isp2x00_hostdata { u_char revision; struct pci_dev *pci_dev; /* result and request queues (shared with isp2x00): */ u_int req_in_ptr; /* index of next request slot */ u_int res_out_ptr; /* index of next result slot */ /* this is here so the queues are nicely aligned */ long send_marker; /* do we need to send a marker? */ char * res; char * req; struct init_cb control_block; int adapter_state; unsigned long int tag_ages[QLOGICFC_MAX_ID + 1]; Scsi_Cmnd *handle_ptrs[QLOGICFC_REQ_QUEUE_LEN + 1]; unsigned long handle_serials[QLOGICFC_REQ_QUEUE_LEN + 1]; struct id_name_map port_db[QLOGICFC_MAX_ID + 1]; u_char mbox_done; u64 wwn; u_int port_id; u_char queued; u_char host_id; struct timer_list explore_timer; }; /* queue length's _must_ be power of two: */ #define QUEUE_DEPTH(in, out, ql) ((in - out) & (ql)) #define REQ_QUEUE_DEPTH(in, out) QUEUE_DEPTH(in, out, \ QLOGICFC_REQ_QUEUE_LEN) #define RES_QUEUE_DEPTH(in, out) QUEUE_DEPTH(in, out, RES_QUEUE_LEN) static void isp2x00_enable_irqs(struct Scsi_Host *); static void isp2x00_disable_irqs(struct Scsi_Host *); static int isp2x00_init(struct Scsi_Host *); static int isp2x00_reset_hardware(struct Scsi_Host *); static int isp2x00_mbox_command(struct Scsi_Host *, u_short[]); static int isp2x00_return_status(Scsi_Cmnd *, struct Status_Entry *); static void isp2x00_intr_handler(int, void *, struct pt_regs *); static void do_isp2x00_intr_handler(int, void *, struct pt_regs *); static int isp2x00_make_portdb(struct Scsi_Host *); #if ISP2x00_FABRIC static int isp2x00_init_fabric(struct Scsi_Host *, struct id_name_map *, int); #endif #if USE_NVRAM_DEFAULTS static int isp2x00_get_nvram_defaults(struct Scsi_Host *, struct init_cb *); static u_short isp2x00_read_nvram_word(struct Scsi_Host *, u_short); #endif #if DEBUG_ISP2x00 static void isp2x00_print_scsi_cmd(Scsi_Cmnd *); #endif #if DEBUG_ISP2x00_INTR static void isp2x00_print_status_entry(struct Status_Entry *); #endif static inline void isp2x00_enable_irqs(struct Scsi_Host *host) { outw(ISP_EN_INT | ISP_EN_RISC, host->io_port + PCI_INTER_CTL); } static inline void isp2x00_disable_irqs(struct Scsi_Host *host) { outw(0x0, host->io_port + PCI_INTER_CTL); } int isp2x00_detect(Scsi_Host_Template * tmpt) { int hosts = 0; int wait_time; struct Scsi_Host *host = NULL; struct isp2x00_hostdata *hostdata; struct pci_dev *pdev; unsigned short device_ids[2]; dma_addr_t busaddr; int i; ENTER("isp2x00_detect"); device_ids[0] = PCI_DEVICE_ID_QLOGIC_ISP2100; device_ids[1] = PCI_DEVICE_ID_QLOGIC_ISP2200; tmpt->proc_name = "isp2x00"; if (pci_present() == 0) { printk(KERN_INFO "qlogicfc : PCI not present\n"); return 0; } for (i=0; i<2; i++){ pdev = NULL; while ((pdev = pci_find_device(PCI_VENDOR_ID_QLOGIC, device_ids[i], pdev))) { if (pci_enable_device(pdev)) continue; /* Try to configure DMA attributes. */ if (pci_set_dma_mask(pdev, (u64) 0xffffffffffffffff) && pci_set_dma_mask(pdev, (u64) 0xffffffff)) continue; host = scsi_register(tmpt, sizeof(struct isp2x00_hostdata)); if (!host) { printk("qlogicfc%d : could not register host.\n", hosts); continue; } scsi_set_pci_device(host, pdev); host->max_id = QLOGICFC_MAX_ID + 1; host->max_lun = QLOGICFC_MAX_LUN; host->hostt->use_new_eh_code = 1; hostdata = (struct isp2x00_hostdata *) host->hostdata; memset(hostdata, 0, sizeof(struct isp2x00_hostdata)); hostdata->pci_dev = pdev; hostdata->res = pci_alloc_consistent(pdev, RES_SIZE + REQ_SIZE, &busaddr); if (!hostdata->res){ printk("qlogicfc%d : could not allocate memory for request and response queue.\n", hosts); pci_free_consistent(pdev, RES_SIZE + REQ_SIZE, hostdata->res, busaddr); scsi_unregister(host); continue; } hostdata->req = hostdata->res + (RES_QUEUE_LEN + 1)*QUEUE_ENTRY_LEN; hostdata->queued = 0; /* set up the control block */ hostdata->control_block.version = 0x1; hostdata->control_block.firm_opts = cpu_to_le16(0x800e); hostdata->control_block.max_frame_len = cpu_to_le16(2048); hostdata->control_block.max_iocb = cpu_to_le16(QLOGICFC_REQ_QUEUE_LEN); hostdata->control_block.exec_throttle = cpu_to_le16(QLOGICFC_CMD_PER_LUN); hostdata->control_block.retry_delay = 5; hostdata->control_block.retry_cnt = 1; hostdata->control_block.node_name[0] = cpu_to_le16(0x0020); hostdata->control_block.node_name[1] = cpu_to_le16(0xE000); hostdata->control_block.node_name[2] = cpu_to_le16(0x008B); hostdata->control_block.node_name[3] = cpu_to_le16(0x0000); hostdata->control_block.hard_addr = cpu_to_le16(0x0003); hostdata->control_block.req_queue_len = cpu_to_le16(QLOGICFC_REQ_QUEUE_LEN + 1); hostdata->control_block.res_queue_len = cpu_to_le16(RES_QUEUE_LEN + 1); hostdata->control_block.res_queue_addr_lo = cpu_to_le32(pci64_dma_lo32(busaddr)); hostdata->control_block.res_queue_addr_high = cpu_to_le32(pci64_dma_hi32(busaddr)); hostdata->control_block.req_queue_addr_lo = cpu_to_le32(pci64_dma_lo32(busaddr + RES_SIZE)); hostdata->control_block.req_queue_addr_high = cpu_to_le32(pci64_dma_hi32(busaddr + RES_SIZE)); hostdata->control_block.add_firm_opts |= cpu_to_le16(CONNECTION_PREFERENCE<<4); hostdata->adapter_state = AS_LOOP_DOWN; hostdata->explore_timer.data = 1; hostdata->host_id = hosts; if (isp2x00_init(host) || isp2x00_reset_hardware(host)) { pci_free_consistent (pdev, RES_SIZE + REQ_SIZE, hostdata->res, busaddr); scsi_unregister(host); continue; } host->this_id = 0; if (request_irq(host->irq, do_isp2x00_intr_handler, SA_INTERRUPT | SA_SHIRQ, "qlogicfc", host)) { printk("qlogicfc%d : interrupt %d already in use\n", hostdata->host_id, host->irq); pci_free_consistent (pdev, RES_SIZE + REQ_SIZE, hostdata->res, busaddr); scsi_unregister(host); continue; } if (!request_region(host->io_port, 0xff, "qlogicfc")) { printk("qlogicfc%d : i/o region 0x%lx-0x%lx already " "in use\n", hostdata->host_id, host->io_port, host->io_port + 0xff); free_irq(host->irq, host); pci_free_consistent (pdev, RES_SIZE + REQ_SIZE, hostdata->res, busaddr); scsi_unregister(host); continue; } outw(0x0, host->io_port + PCI_SEMAPHORE); outw(HCCR_CLEAR_RISC_INTR, host->io_port + HOST_HCCR); isp2x00_enable_irqs(host); /* wait for the loop to come up */ for (wait_time = jiffies + 10 * HZ; wait_time > jiffies && hostdata->adapter_state == AS_LOOP_DOWN;) { barrier(); cpu_relax(); } if (hostdata->adapter_state == AS_LOOP_DOWN) { printk("qlogicfc%d : link is not up\n", hostdata->host_id); } hosts++; hostdata->explore_timer.data = 0; } } /* this busy loop should not be needed but the isp2x00 seems to need some time before recognizing it is attached to a fabric */ #if ISP2x00_FABRIC for (wait_time = jiffies + 5 * HZ; wait_time > jiffies;) { barrier(); cpu_relax(); } #endif LEAVE("isp2x00_detect"); return hosts; } static int isp2x00_make_portdb(struct Scsi_Host *host) { short param[8]; int i, j; struct id_name_map temp[QLOGICFC_MAX_ID + 1]; struct isp2x00_hostdata *hostdata; isp2x00_disable_irqs(host); memset(temp, 0, sizeof(temp)); hostdata = (struct isp2x00_hostdata *) host->hostdata; #if ISP2x00_FABRIC for (i = 0x81; i < QLOGICFC_MAX_ID; i++) { param[0] = MBOX_PORT_LOGOUT; param[1] = i << 8; param[2] = 0; param[3] = 0; isp2x00_mbox_command(host, param); if (param[0] != MBOX_COMMAND_COMPLETE) { DEBUG_FABRIC(printk("qlogicfc%d : logout failed %x %x\n", hostdata->host_id, i, param[0])); } } #endif param[0] = MBOX_GET_INIT_SCSI_ID; isp2x00_mbox_command(host, param); if (param[0] == MBOX_COMMAND_COMPLETE) { hostdata->port_id = ((u_int) param[3]) << 16; hostdata->port_id |= param[2]; temp[0].loop_id = param[1]; temp[0].wwn = hostdata->wwn; } else { printk("qlogicfc%d : error getting scsi id.\n", hostdata->host_id); } for (i = 0; i <=QLOGICFC_MAX_ID; i++) temp[i].loop_id = temp[0].loop_id; for (i = 0, j = 1; i <= QLOGICFC_MAX_LOOP_ID; i++) { param[0] = MBOX_GET_PORT_NAME; param[1] = (i << 8) & 0xff00; isp2x00_mbox_command(host, param); if (param[0] == MBOX_COMMAND_COMPLETE) { temp[j].loop_id = i; temp[j].wwn = ((u64) (param[2] & 0xff)) << 56; temp[j].wwn |= ((u64) ((param[2] >> 8) & 0xff)) << 48; temp[j].wwn |= ((u64) (param[3] & 0xff)) << 40; temp[j].wwn |= ((u64) ((param[3] >> 8) & 0xff)) << 32; temp[j].wwn |= ((u64) (param[6] & 0xff)) << 24; temp[j].wwn |= ((u64) ((param[6] >> 8) & 0xff)) << 16; temp[j].wwn |= ((u64) (param[7] & 0xff)) << 8; temp[j].wwn |= ((u64) ((param[7] >> 8) & 0xff)); j++; } } #if ISP2x00_FABRIC isp2x00_init_fabric(host, temp, j); #endif for (i = 0; i <= QLOGICFC_MAX_ID; i++) { if (temp[i].wwn != hostdata->port_db[i].wwn) { for (j = 0; j <= QLOGICFC_MAX_ID; j++) { if (temp[j].wwn == hostdata->port_db[i].wwn) { hostdata->port_db[i].loop_id = temp[j].loop_id; break; } } if (j == QLOGICFC_MAX_ID + 1) hostdata->port_db[i].loop_id = temp[0].loop_id; for (j = 0; j <= QLOGICFC_MAX_ID; j++) { if (hostdata->port_db[j].wwn == temp[i].wwn || !hostdata->port_db[j].wwn) { break; } } if (j == QLOGICFC_MAX_ID + 1) printk("qlogicfc%d : Too many scsi devices, no more room in port map.\n", hostdata->host_id); if (!hostdata->port_db[j].wwn) { hostdata->port_db[j].loop_id = temp[i].loop_id; hostdata->port_db[j].wwn = temp[i].wwn; } } else hostdata->port_db[i].loop_id = temp[i].loop_id; } isp2x00_enable_irqs(host); return 0; } #if ISP2x00_FABRIC #define FABRIC_PORT 0x7e #define FABRIC_CONTROLLER 0x7f #define FABRIC_SNS 0x80 int isp2x00_init_fabric(struct Scsi_Host *host, struct id_name_map *port_db, int cur_scsi_id) { u_short param[8]; u64 wwn; int done = 0; u_short loop_id = 0x81; u_short scsi_id = cur_scsi_id; u_int port_id; struct sns_cb *req; u_char *sns_response; dma_addr_t busaddr; struct isp2x00_hostdata *hostdata; hostdata = (struct isp2x00_hostdata *) host->hostdata; DEBUG_FABRIC(printk("qlogicfc%d : Checking for a fabric.\n", hostdata->host_id)); param[0] = MBOX_GET_PORT_NAME; param[1] = (u16)FABRIC_PORT << 8; isp2x00_mbox_command(host, param); if (param[0] != MBOX_COMMAND_COMPLETE) { DEBUG_FABRIC(printk("qlogicfc%d : fabric check result %x\n", hostdata->host_id, param[0])); return 0; } printk("qlogicfc%d : Fabric found.\n", hostdata->host_id); req = (struct sns_cb *)pci_alloc_consistent(hostdata->pci_dev, sizeof(*req) + 608, &busaddr); if (!req){ printk("qlogicfc%d : Could not allocate DMA resources for fabric initialization\n", hostdata->host_id); return 0; } sns_response = (u_char *)(req + 1); if (hostdata->adapter_state & AS_REDO_LOOP_PORTDB){ memset(req, 0, sizeof(*req)); req->len = cpu_to_le16(8); req->response_low = cpu_to_le32(pci64_dma_lo32(busaddr + sizeof(*req))); req->response_high = cpu_to_le32(pci64_dma_hi32(busaddr + sizeof(*req))); req->sub_len = cpu_to_le16(22); req->data[0] = 0x17; req->data[1] = 0x02; req->data[8] = (u_char) (hostdata->port_id & 0xff); req->data[9] = (u_char) (hostdata->port_id >> 8 & 0xff); req->data[10] = (u_char) (hostdata->port_id >> 16 & 0xff); req->data[13] = 0x01; param[0] = MBOX_SEND_SNS; param[1] = 30; param[2] = pci64_dma_lo32(busaddr) >> 16; param[3] = pci64_dma_lo32(busaddr); param[6] = pci64_dma_hi32(busaddr) >> 16; param[7] = pci64_dma_hi32(busaddr); isp2x00_mbox_command(host, param); if (param[0] != MBOX_COMMAND_COMPLETE) printk("qlogicfc%d : error sending RFC-4\n", hostdata->host_id); } port_id = hostdata->port_id; while (!done) { memset(req, 0, sizeof(*req)); req->len = cpu_to_le16(304); req->response_low = cpu_to_le32(pci64_dma_lo32(busaddr + sizeof(*req))); req->response_high = cpu_to_le32(pci64_dma_hi32(busaddr + sizeof(*req))); req->sub_len = cpu_to_le16(6); req->data[0] = 0x00; req->data[1] = 0x01; req->data[8] = (u_char) (port_id & 0xff); req->data[9] = (u_char) (port_id >> 8 & 0xff); req->data[10] = (u_char) (port_id >> 16 & 0xff); param[0] = MBOX_SEND_SNS; param[1] = 14; param[2] = pci64_dma_lo32(busaddr) >> 16; param[3] = pci64_dma_lo32(busaddr); param[6] = pci64_dma_hi32(busaddr) >> 16; param[7] = pci64_dma_hi32(busaddr); isp2x00_mbox_command(host, param); if (param[0] == MBOX_COMMAND_COMPLETE) { DEBUG_FABRIC(printk("qlogicfc%d : found node %02x%02x%02x%02x%02x%02x%02x%02x ", hostdata->host_id, sns_response[20], sns_response[21], sns_response[22], sns_response[23], sns_response[24], sns_response[25], sns_response[26], sns_response[27])); DEBUG_FABRIC(printk(" port id: %02x%02x%02x\n", sns_response[17], sns_response[18], sns_response[19])); port_id = ((u_int) sns_response[17]) << 16; port_id |= ((u_int) sns_response[18]) << 8; port_id |= ((u_int) sns_response[19]); wwn = ((u64) sns_response[20]) << 56; wwn |= ((u64) sns_response[21]) << 48; wwn |= ((u64) sns_response[22]) << 40; wwn |= ((u64) sns_response[23]) << 32; wwn |= ((u64) sns_response[24]) << 24; wwn |= ((u64) sns_response[25]) << 16; wwn |= ((u64) sns_response[26]) << 8; wwn |= ((u64) sns_response[27]); if (hostdata->port_id >> 8 != port_id >> 8) { DEBUG_FABRIC(printk("qlogicfc%d : adding a fabric port: %x\n", hostdata->host_id, port_id)); param[0] = MBOX_PORT_LOGIN; param[1] = loop_id << 8; param[2] = (u_short) (port_id >> 16); param[3] = (u_short) (port_id); isp2x00_mbox_command(host, param); if (param[0] == MBOX_COMMAND_COMPLETE) { port_db[scsi_id].wwn = wwn; port_db[scsi_id].loop_id = loop_id; loop_id++; scsi_id++; } else { printk("qlogicfc%d : Error performing port login %x\n", hostdata->host_id, param[0]); DEBUG_FABRIC(printk("qlogicfc%d : loop_id: %x\n", hostdata->host_id, loop_id)); param[0] = MBOX_PORT_LOGOUT; param[1] = loop_id << 8; param[2] = 0; param[3] = 0; isp2x00_mbox_command(host, param); } } if (hostdata->port_id == port_id) done = 1; } else { printk("qlogicfc%d : Get All Next failed %x.\n", hostdata->host_id, param[0]); pci_free_consistent(hostdata->pci_dev, sizeof(*req) + 608, req, busaddr); return 0; } } pci_free_consistent(hostdata->pci_dev, sizeof(*req) + 608, req, busaddr); return 1; } #endif /* ISP2x00_FABRIC */ int isp2x00_release(struct Scsi_Host *host) { struct isp2x00_hostdata *hostdata; dma_addr_t busaddr; ENTER("isp2x00_release"); hostdata = (struct isp2x00_hostdata *) host->hostdata; outw(0x0, host->io_port + PCI_INTER_CTL); free_irq(host->irq, host); release_region(host->io_port, 0xff); busaddr = pci64_dma_build(le32_to_cpu(hostdata->control_block.res_queue_addr_high), le32_to_cpu(hostdata->control_block.res_queue_addr_lo)); pci_free_consistent(hostdata->pci_dev, RES_SIZE + REQ_SIZE, hostdata->res, busaddr); LEAVE("isp2x00_release"); return 0; } const char *isp2x00_info(struct Scsi_Host *host) { static char buf[80]; struct isp2x00_hostdata *hostdata; ENTER("isp2x00_info"); hostdata = (struct isp2x00_hostdata *) host->hostdata; sprintf(buf, "QLogic ISP%04x SCSI on PCI bus %02x device %02x irq %d base 0x%lx", hostdata->pci_dev->device, hostdata->pci_dev->bus->number, hostdata->pci_dev->devfn, host->irq, host->io_port); LEAVE("isp2x00_info"); return buf; } /* * The middle SCSI layer ensures that queuecommand never gets invoked * concurrently with itself or the interrupt handler (though the * interrupt handler may call this routine as part of * request-completion handling). */ int isp2x00_queuecommand(Scsi_Cmnd * Cmnd, void (*done) (Scsi_Cmnd *)) { int i, sg_count, n, num_free; u_int in_ptr, out_ptr; struct dataseg *ds; struct scatterlist *sg; struct Command_Entry *cmd; struct Continuation_Entry *cont; struct Scsi_Host *host; struct isp2x00_hostdata *hostdata; ENTER("isp2x00_queuecommand"); host = Cmnd->host; hostdata = (struct isp2x00_hostdata *) host->hostdata; Cmnd->scsi_done = done; DEBUG(isp2x00_print_scsi_cmd(Cmnd)); if (hostdata->adapter_state & AS_REDO_FABRIC_PORTDB || hostdata->adapter_state & AS_REDO_LOOP_PORTDB) { isp2x00_make_portdb(host); hostdata->adapter_state = AS_LOOP_GOOD; printk("qlogicfc%d : Port Database\n", hostdata->host_id); for (i = 0; hostdata->port_db[i].wwn != 0; i++) { printk("wwn: %08x%08x scsi_id: %x loop_id: ", (u_int) (hostdata->port_db[i].wwn >> 32), (u_int) hostdata->port_db[i].wwn, i); if (hostdata->port_db[i].loop_id != hostdata->port_db[0].loop_id || i == 0) printk("%x", hostdata->port_db[i].loop_id); else printk("Not Available"); printk("\n"); } } if (hostdata->adapter_state == AS_FIRMWARE_DEAD) { printk("qlogicfc%d : The firmware is dead, just return.\n", hostdata->host_id); host->max_id = 0; return 0; } out_ptr = inw(host->io_port + MBOX4); in_ptr = hostdata->req_in_ptr; DEBUG(printk("qlogicfc%d : request queue depth %d\n", hostdata->host_id, REQ_QUEUE_DEPTH(in_ptr, out_ptr))); cmd = (struct Command_Entry *) &hostdata->req[in_ptr*QUEUE_ENTRY_LEN]; in_ptr = (in_ptr + 1) & QLOGICFC_REQ_QUEUE_LEN; if (in_ptr == out_ptr) { DEBUG(printk("qlogicfc%d : request queue overflow\n", hostdata->host_id)); return 1; } if (hostdata->send_marker) { struct Marker_Entry *marker; TRACE("queue marker", in_ptr, 0); DEBUG(printk("qlogicfc%d : adding marker entry\n", hostdata->host_id)); marker = (struct Marker_Entry *) cmd; memset(marker, 0, sizeof(struct Marker_Entry)); marker->hdr.entry_type = ENTRY_MARKER; marker->hdr.entry_cnt = 1; marker->modifier = SYNC_ALL; hostdata->send_marker = 0; if (((in_ptr + 1) & QLOGICFC_REQ_QUEUE_LEN) == out_ptr) { outw(in_ptr, host->io_port + MBOX4); hostdata->req_in_ptr = in_ptr; DEBUG(printk("qlogicfc%d : request queue overflow\n", hostdata->host_id)); return 1; } cmd = (struct Command_Entry *) &hostdata->req[in_ptr*QUEUE_ENTRY_LEN]; in_ptr = (in_ptr + 1) & QLOGICFC_REQ_QUEUE_LEN; } TRACE("queue command", in_ptr, Cmnd); memset(cmd, 0, sizeof(struct Command_Entry)); /* find a free handle mapping slot */ for (i = in_ptr; i != (in_ptr - 1) && hostdata->handle_ptrs[i]; i = ((i + 1) % (QLOGICFC_REQ_QUEUE_LEN + 1))); if (!hostdata->handle_ptrs[i]) { cmd->handle = cpu_to_le32(i); hostdata->handle_ptrs[i] = Cmnd; hostdata->handle_serials[i] = Cmnd->serial_number; } else { printk("qlogicfc%d : no handle slots, this should not happen.\n", hostdata->host_id); printk("hostdata->queued is %x, in_ptr: %x\n", hostdata->queued, in_ptr); for (i = 0; i <= QLOGICFC_REQ_QUEUE_LEN; i++){ if (!hostdata->handle_ptrs[i]){ printk("slot %d has %p\n", i, hostdata->handle_ptrs[i]); } } return 1; } cmd->hdr.entry_type = ENTRY_COMMAND; cmd->hdr.entry_cnt = 1; cmd->target_lun = Cmnd->lun; cmd->expanded_lun = cpu_to_le16(Cmnd->lun); #if ISP2x00_PORTDB cmd->target_id = hostdata->port_db[Cmnd->target].loop_id; #else cmd->target_id = Cmnd->target; #endif cmd->total_byte_cnt = cpu_to_le32(Cmnd->request_bufflen); cmd->time_out = 0; memcpy(cmd->cdb, Cmnd->cmnd, Cmnd->cmd_len); if (Cmnd->use_sg) { sg = (struct scatterlist *) Cmnd->request_buffer; sg_count = pci_map_sg(hostdata->pci_dev, sg, Cmnd->use_sg, scsi_to_pci_dma_dir(Cmnd->sc_data_direction)); cmd->segment_cnt = cpu_to_le16(sg_count); ds = cmd->dataseg; /* fill in first two sg entries: */ n = sg_count; if (n > DATASEGS_PER_COMMAND) n = DATASEGS_PER_COMMAND; for (i = 0; i < n; i++) { ds[i].d_base = cpu_to_le32(pci64_dma_lo32(sg_dma_address(sg))); ds[i].d_base_hi = cpu_to_le32(pci64_dma_hi32(sg_dma_address(sg))); ds[i].d_count = cpu_to_le32(sg_dma_len(sg)); ++sg; } sg_count -= DATASEGS_PER_COMMAND; while (sg_count > 0) { ++cmd->hdr.entry_cnt; cont = (struct Continuation_Entry *) &hostdata->req[in_ptr*QUEUE_ENTRY_LEN]; memset(cont, 0, sizeof(struct Continuation_Entry)); in_ptr = (in_ptr + 1) & QLOGICFC_REQ_QUEUE_LEN; if (in_ptr == out_ptr) { DEBUG(printk("qlogicfc%d : unexpected request queue overflow\n", hostdata->host_id)); return 1; } TRACE("queue continuation", in_ptr, 0); cont->hdr.entry_type = ENTRY_CONTINUATION; ds = cont->dataseg; n = sg_count; if (n > DATASEGS_PER_CONT) n = DATASEGS_PER_CONT; for (i = 0; i < n; ++i) { ds[i].d_base = cpu_to_le32(pci64_dma_lo32(sg_dma_address(sg))); ds[i].d_base_hi = cpu_to_le32(pci64_dma_hi32(sg_dma_address(sg))); ds[i].d_count = cpu_to_le32(sg_dma_len(sg)); ++sg; } sg_count -= n; } } else if (Cmnd->request_bufflen && Cmnd->sc_data_direction != PCI_DMA_NONE) { struct page *page = virt_to_page(Cmnd->request_buffer); unsigned long offset = ((unsigned long)Cmnd->request_buffer & ~PAGE_MASK); dma_addr_t busaddr = pci_map_page(hostdata->pci_dev, page, offset, Cmnd->request_bufflen, scsi_to_pci_dma_dir(Cmnd->sc_data_direction)); Cmnd->SCp.dma_handle = busaddr; cmd->dataseg[0].d_base = cpu_to_le32(pci64_dma_lo32(busaddr)); cmd->dataseg[0].d_base_hi = cpu_to_le32(pci64_dma_hi32(busaddr)); cmd->dataseg[0].d_count = cpu_to_le32(Cmnd->request_bufflen); cmd->segment_cnt = cpu_to_le16(1); } else { cmd->dataseg[0].d_base = 0; cmd->dataseg[0].d_base_hi = 0; cmd->segment_cnt = cpu_to_le16(1); /* Shouldn't this be 0? */ } if (Cmnd->sc_data_direction == SCSI_DATA_WRITE) cmd->control_flags = cpu_to_le16(CFLAG_WRITE); else cmd->control_flags = cpu_to_le16(CFLAG_READ); if (Cmnd->device->tagged_supported) { if ((jiffies - hostdata->tag_ages[Cmnd->target]) > (2 * SCSI_TIMEOUT)) { cmd->control_flags |= cpu_to_le16(CFLAG_ORDERED_TAG); hostdata->tag_ages[Cmnd->target] = jiffies; } else switch (Cmnd->tag) { case HEAD_OF_QUEUE_TAG: cmd->control_flags |= cpu_to_le16(CFLAG_HEAD_TAG); break; case ORDERED_QUEUE_TAG: cmd->control_flags |= cpu_to_le16(CFLAG_ORDERED_TAG); break; default: cmd->control_flags |= cpu_to_le16(CFLAG_SIMPLE_TAG); break; } } /* * TEST_UNIT_READY commands from scsi_scan will fail due to "overlapped * commands attempted" unless we setup at least a simple queue (midlayer * will embelish this once it can do an INQUIRY command to the device) */ else cmd->control_flags |= cpu_to_le16(CFLAG_SIMPLE_TAG); outw(in_ptr, host->io_port + MBOX4); hostdata->req_in_ptr = in_ptr; hostdata->queued++; num_free = QLOGICFC_REQ_QUEUE_LEN - REQ_QUEUE_DEPTH(in_ptr, out_ptr); num_free = (num_free > 2) ? num_free - 2 : 0; host->can_queue = hostdata->queued + num_free; if (host->can_queue > QLOGICFC_REQ_QUEUE_LEN) host->can_queue = QLOGICFC_REQ_QUEUE_LEN; host->sg_tablesize = QLOGICFC_MAX_SG(num_free); /* this is really gross */ if (host->can_queue <= host->host_busy){ if (host->can_queue+2 < host->host_busy) DEBUG(printk("qlogicfc%d.c crosses its fingers.\n", hostdata->host_id)); host->can_queue = host->host_busy + 1; } LEAVE("isp2x00_queuecommand"); return 0; } /* we have received an event, such as a lip or an RSCN, which may mean that * our port database is incorrect so the port database must be recreated. */ static void redo_port_db(unsigned long arg) { struct Scsi_Host * host = (struct Scsi_Host *) arg; struct isp2x00_hostdata * hostdata; unsigned long flags; int i; hostdata = (struct isp2x00_hostdata *) host->hostdata; hostdata->explore_timer.data = 0; del_timer(&hostdata->explore_timer); spin_lock_irqsave(&io_request_lock, flags); if (hostdata->adapter_state & AS_REDO_FABRIC_PORTDB || hostdata->adapter_state & AS_REDO_LOOP_PORTDB) { isp2x00_make_portdb(host); printk("qlogicfc%d : Port Database\n", hostdata->host_id); for (i = 0; hostdata->port_db[i].wwn != 0; i++) { printk("wwn: %08x%08x scsi_id: %x loop_id: ", (u_int) (hostdata->port_db[i].wwn >> 32), (u_int) hostdata->port_db[i].wwn, i); if (hostdata->port_db[i].loop_id != hostdata->port_db[0].loop_id || i == 0) printk("%x", hostdata->port_db[i].loop_id); else printk("Not Available"); printk("\n"); } for (i = 0; i < QLOGICFC_REQ_QUEUE_LEN; i++){ if (hostdata->handle_ptrs[i] && (hostdata->port_db[hostdata->handle_ptrs[i]->target].loop_id > QLOGICFC_MAX_LOOP_ID || hostdata->adapter_state & AS_REDO_LOOP_PORTDB)){ if (hostdata->port_db[hostdata->handle_ptrs[i]->target].loop_id != hostdata->port_db[0].loop_id){ Scsi_Cmnd *Cmnd = hostdata->handle_ptrs[i]; if (Cmnd->use_sg) pci_unmap_sg(hostdata->pci_dev, (struct scatterlist *)Cmnd->buffer, Cmnd->use_sg, scsi_to_pci_dma_dir(Cmnd->sc_data_direction)); else if (Cmnd->request_bufflen && Cmnd->sc_data_direction != PCI_DMA_NONE) { pci_unmap_page(hostdata->pci_dev, Cmnd->SCp.dma_handle, Cmnd->request_bufflen, scsi_to_pci_dma_dir(Cmnd->sc_data_direction)); } hostdata->handle_ptrs[i]->result = DID_SOFT_ERROR << 16; if (hostdata->handle_ptrs[i]->scsi_done){ (*hostdata->handle_ptrs[i]->scsi_done) (hostdata->handle_ptrs[i]); } else printk("qlogicfc%d : done is null?\n", hostdata->host_id); hostdata->handle_ptrs[i] = NULL; hostdata->handle_serials[i] = 0; } } } hostdata->adapter_state = AS_LOOP_GOOD; } spin_unlock_irqrestore(&io_request_lock, flags); } #define ASYNC_EVENT_INTERRUPT 0x01 void do_isp2x00_intr_handler(int irq, void *dev_id, struct pt_regs *regs) { unsigned long flags; spin_lock_irqsave(&io_request_lock, flags); isp2x00_intr_handler(irq, dev_id, regs); spin_unlock_irqrestore(&io_request_lock, flags); } void isp2x00_intr_handler(int irq, void *dev_id, struct pt_regs *regs) { Scsi_Cmnd *Cmnd; struct Status_Entry *sts; struct Scsi_Host *host = dev_id; struct isp2x00_hostdata *hostdata; u_int in_ptr, out_ptr, handle, num_free; u_short status; ENTER_INTR("isp2x00_intr_handler"); hostdata = (struct isp2x00_hostdata *) host->hostdata; DEBUG_INTR(printk("qlogicfc%d : interrupt on line %d\n", hostdata->host_id, irq)); if (!(inw(host->io_port + PCI_INTER_STS) & 0x08)) { /* spurious interrupts can happen legally */ DEBUG_INTR(printk("qlogicfc%d : got spurious interrupt\n", hostdata->host_id)); return; } in_ptr = inw(host->io_port + MBOX5); out_ptr = hostdata->res_out_ptr; if ((inw(host->io_port + PCI_SEMAPHORE) & ASYNC_EVENT_INTERRUPT)) { status = inw(host->io_port + MBOX0); DEBUG_INTR(printk("qlogicfc%d : mbox completion status: %x\n", hostdata->host_id, status)); switch (status) { case LOOP_UP: case POINT_TO_POINT_UP: printk("qlogicfc%d : Link is Up\n", hostdata->host_id); hostdata->adapter_state = AS_REDO_FABRIC_PORTDB | AS_REDO_LOOP_PORTDB; break; case LOOP_DOWN: printk("qlogicfc%d : Link is Down\n", hostdata->host_id); hostdata->adapter_state = AS_LOOP_DOWN; break; case CONNECTION_MODE: printk("received CONNECTION_MODE irq %x\n", inw(host->io_port + MBOX1)); break; case CHANGE_NOTIFICATION: printk("qlogicfc%d : RSCN Received\n", hostdata->host_id); if (hostdata->adapter_state == AS_LOOP_GOOD) hostdata->adapter_state = AS_REDO_FABRIC_PORTDB; break; case LIP_OCCURRED: case LIP_RECEIVED: printk("qlogicfc%d : Loop Reinitialized\n", hostdata->host_id); if (hostdata->adapter_state == AS_LOOP_GOOD) hostdata->adapter_state = AS_REDO_LOOP_PORTDB; break; case SYSTEM_ERROR: printk("qlogicfc%d : The firmware just choked.\n", hostdata->host_id); hostdata->adapter_state = AS_FIRMWARE_DEAD; break; case SCSI_COMMAND_COMPLETE: handle = inw(host->io_port + MBOX1) | (inw(host->io_port + MBOX2) << 16); Cmnd = hostdata->handle_ptrs[handle]; hostdata->handle_ptrs[handle] = NULL; hostdata->handle_serials[handle] = 0; hostdata->queued--; if (Cmnd != NULL) { if (Cmnd->use_sg) pci_unmap_sg(hostdata->pci_dev, (struct scatterlist *)Cmnd->buffer, Cmnd->use_sg, scsi_to_pci_dma_dir(Cmnd->sc_data_direction)); else if (Cmnd->request_bufflen && Cmnd->sc_data_direction != PCI_DMA_NONE) pci_unmap_page(hostdata->pci_dev, Cmnd->SCp.dma_handle, Cmnd->request_bufflen, scsi_to_pci_dma_dir(Cmnd->sc_data_direction)); Cmnd->result = 0x0; (*Cmnd->scsi_done) (Cmnd); } else printk("qlogicfc%d.c : got a null value out of handle_ptrs, this sucks\n", hostdata->host_id); break; case MBOX_COMMAND_COMPLETE: case INVALID_COMMAND: case HOST_INTERFACE_ERROR: case TEST_FAILED: case COMMAND_ERROR: case COMMAND_PARAM_ERROR: case PORT_ID_USED: case LOOP_ID_USED: case ALL_IDS_USED: hostdata->mbox_done = 1; outw(HCCR_CLEAR_RISC_INTR, host->io_port + HOST_HCCR); return; default: printk("qlogicfc%d : got an unknown status? %x\n", hostdata->host_id, status); } if ((hostdata->adapter_state & AS_REDO_LOOP_PORTDB || hostdata->adapter_state & AS_REDO_FABRIC_PORTDB) && hostdata->explore_timer.data == 0){ hostdata->explore_timer.function = redo_port_db; hostdata->explore_timer.data = (unsigned long)host; hostdata->explore_timer.expires = jiffies + (HZ/4); init_timer(&hostdata->explore_timer); add_timer(&hostdata->explore_timer); } outw(0x0, host->io_port + PCI_SEMAPHORE); } else { DEBUG_INTR(printk("qlogicfc%d : response queue update\n", hostdata->host_id)); DEBUG_INTR(printk("qlogicfc%d : response queue depth %d\n", hostdata->host_id, RES_QUEUE_DEPTH(in_ptr, out_ptr))); while (out_ptr != in_ptr) { unsigned le_hand; sts = (struct Status_Entry *) &hostdata->res[out_ptr*QUEUE_ENTRY_LEN]; out_ptr = (out_ptr + 1) & RES_QUEUE_LEN; TRACE("done", out_ptr, Cmnd); DEBUG_INTR(isp2x00_print_status_entry(sts)); le_hand = le32_to_cpu(sts->handle); if (sts->hdr.entry_type == ENTRY_STATUS && (Cmnd = hostdata->handle_ptrs[le_hand])) { Cmnd->result = isp2x00_return_status(Cmnd, sts); hostdata->queued--; if (Cmnd->use_sg) pci_unmap_sg(hostdata->pci_dev, (struct scatterlist *)Cmnd->buffer, Cmnd->use_sg, scsi_to_pci_dma_dir(Cmnd->sc_data_direction)); else if (Cmnd->request_bufflen && Cmnd->sc_data_direction != PCI_DMA_NONE) pci_unmap_page(hostdata->pci_dev, Cmnd->SCp.dma_handle, Cmnd->request_bufflen, scsi_to_pci_dma_dir(Cmnd->sc_data_direction)); /* * if any of the following are true we do not * call scsi_done. if the status is CS_ABORTED * we dont have to call done because the upper * level should already know its aborted. */ if (hostdata->handle_serials[le_hand] != Cmnd->serial_number || le16_to_cpu(sts->completion_status) == CS_ABORTED){ hostdata->handle_serials[le_hand] = 0; hostdata->handle_ptrs[le_hand] = NULL; outw(out_ptr, host->io_port + MBOX5); continue; } /* * if we get back an error indicating the port * is not there or if the link is down and * this is a device that used to be there * allow the command to timeout. * the device may well be back in a couple of * seconds. */ if ((hostdata->adapter_state == AS_LOOP_DOWN || sts->completion_status == cpu_to_le16(CS_PORT_UNAVAILABLE) || sts->completion_status == cpu_to_le16(CS_PORT_LOGGED_OUT) || sts->completion_status == cpu_to_le16(CS_PORT_CONFIG_CHANGED)) && hostdata->port_db[Cmnd->target].wwn){ outw(out_ptr, host->io_port + MBOX5); continue; } } else { outw(out_ptr, host->io_port + MBOX5); continue; } hostdata->handle_ptrs[le_hand] = NULL; if (sts->completion_status == cpu_to_le16(CS_RESET_OCCURRED) || (sts->status_flags & cpu_to_le16(STF_BUS_RESET))) hostdata->send_marker = 1; if (le16_to_cpu(sts->scsi_status) & 0x0200) memcpy(Cmnd->sense_buffer, sts->req_sense_data, sizeof(Cmnd->sense_buffer)); outw(out_ptr, host->io_port + MBOX5); if (Cmnd->scsi_done != NULL) { (*Cmnd->scsi_done) (Cmnd); } else printk("qlogicfc%d : Ouch, scsi done is NULL\n", hostdata->host_id); } hostdata->res_out_ptr = out_ptr; } out_ptr = inw(host->io_port + MBOX4); in_ptr = hostdata->req_in_ptr; num_free = QLOGICFC_REQ_QUEUE_LEN - REQ_QUEUE_DEPTH(in_ptr, out_ptr); num_free = (num_free > 2) ? num_free - 2 : 0; host->can_queue = hostdata->queued + num_free; if (host->can_queue > QLOGICFC_REQ_QUEUE_LEN) host->can_queue = QLOGICFC_REQ_QUEUE_LEN; host->sg_tablesize = QLOGICFC_MAX_SG(num_free); if (host->can_queue <= host->host_busy){ if (host->can_queue+2 < host->host_busy) DEBUG(printk("qlogicfc%d : crosses its fingers.\n", hostdata->host_id)); host->can_queue = host->host_busy + 1; } outw(HCCR_CLEAR_RISC_INTR, host->io_port + HOST_HCCR); LEAVE_INTR("isp2x00_intr_handler"); } static int isp2x00_return_status(Scsi_Cmnd *Cmnd, struct Status_Entry *sts) { int host_status = DID_ERROR; #if DEBUG_ISP2x00_INTR static char *reason[] = { "DID_OK", "DID_NO_CONNECT", "DID_BUS_BUSY", "DID_TIME_OUT", "DID_BAD_TARGET", "DID_ABORT", "DID_PARITY", "DID_ERROR", "DID_RESET", "DID_BAD_INTR" }; #endif /* DEBUG_ISP2x00_INTR */ ENTER("isp2x00_return_status"); DEBUG(printk("qlogicfc : completion status = 0x%04x\n", le16_to_cpu(sts->completion_status))); switch (le16_to_cpu(sts->completion_status)) { case CS_COMPLETE: host_status = DID_OK; break; case CS_DMA_ERROR: host_status = DID_ERROR; break; case CS_RESET_OCCURRED: host_status = DID_RESET; break; case CS_ABORTED: host_status = DID_ABORT; break; case CS_TIMEOUT: host_status = DID_TIME_OUT; break; case CS_DATA_OVERRUN: host_status = DID_ERROR; break; case CS_DATA_UNDERRUN: if (Cmnd->underflow <= (Cmnd->request_bufflen - le32_to_cpu(sts->residual))) host_status = DID_OK; else host_status = DID_ERROR; break; case CS_PORT_UNAVAILABLE: case CS_PORT_LOGGED_OUT: case CS_PORT_CONFIG_CHANGED: host_status = DID_BAD_TARGET; break; case CS_QUEUE_FULL: host_status = DID_ERROR; break; default: printk("qlogicfc : unknown completion status 0x%04x\n", le16_to_cpu(sts->completion_status)); host_status = DID_ERROR; break; } DEBUG_INTR(printk("qlogicfc : host status (%s) scsi status %x\n", reason[host_status], le16_to_cpu(sts->scsi_status))); LEAVE("isp2x00_return_status"); return (le16_to_cpu(sts->scsi_status) & STATUS_MASK) | (host_status << 16); } int isp2x00_abort(Scsi_Cmnd * Cmnd) { u_short param[8]; int i; struct Scsi_Host *host; struct isp2x00_hostdata *hostdata; int return_status = SUCCESS; ENTER("isp2x00_abort"); host = Cmnd->host; hostdata = (struct isp2x00_hostdata *) host->hostdata; for (i = 0; i < QLOGICFC_REQ_QUEUE_LEN; i++) if (hostdata->handle_ptrs[i] == Cmnd) break; if (i == QLOGICFC_REQ_QUEUE_LEN){ return SUCCESS; } isp2x00_disable_irqs(host); param[0] = MBOX_ABORT_IOCB; #if ISP2x00_PORTDB param[1] = (((u_short) hostdata->port_db[Cmnd->target].loop_id) << 8) | Cmnd->lun; #else param[1] = (((u_short) Cmnd->target) << 8) | Cmnd->lun; #endif param[2] = i & 0xffff; param[3] = i >> 16; isp2x00_mbox_command(host, param); if (param[0] != MBOX_COMMAND_COMPLETE) { printk("qlogicfc%d : scsi abort failure: %x\n", hostdata->host_id, param[0]); if (param[0] == 0x4005) Cmnd->result = DID_ERROR << 16; if (param[0] == 0x4006) Cmnd->result = DID_BAD_TARGET << 16; return_status = FAILED; } if (return_status != SUCCESS){ param[0] = MBOX_GET_FIRMWARE_STATE; isp2x00_mbox_command(host, param); printk("qlogicfc%d : abort failed\n", hostdata->host_id); printk("qlogicfc%d : firmware status is %x %x\n", hostdata->host_id, param[0], param[1]); } isp2x00_enable_irqs(host); LEAVE("isp2x00_abort"); return return_status; } int isp2x00_reset(Scsi_Cmnd * Cmnd, unsigned int reset_flags) { u_short param[8]; struct Scsi_Host *host; struct isp2x00_hostdata *hostdata; int return_status = SCSI_RESET_SUCCESS; ENTER("isp2x00_reset"); host = Cmnd->host; hostdata = (struct isp2x00_hostdata *) host->hostdata; param[0] = MBOX_BUS_RESET; param[1] = 3; isp2x00_disable_irqs(host); isp2x00_mbox_command(host, param); if (param[0] != MBOX_COMMAND_COMPLETE) { printk("qlogicfc%d : scsi bus reset failure: %x\n", hostdata->host_id, param[0]); return_status = SCSI_RESET_ERROR; } isp2x00_enable_irqs(host); LEAVE("isp2x00_reset"); return return_status;; } int isp2x00_biosparam(Disk * disk, kdev_t n, int ip[]) { int size = disk->capacity; ENTER("isp2x00_biosparam"); ip[0] = 64; ip[1] = 32; ip[2] = size >> 11; if (ip[2] > 1024) { ip[0] = 255; ip[1] = 63; ip[2] = size / (ip[0] * ip[1]); } LEAVE("isp2x00_biosparam"); return 0; } static int isp2x00_reset_hardware(struct Scsi_Host *host) { u_short param[8]; struct isp2x00_hostdata *hostdata; int loop_count; dma_addr_t busaddr; ENTER("isp2x00_reset_hardware"); hostdata = (struct isp2x00_hostdata *) host->hostdata; /* * This cannot be right - PCI writes are posted * (apparently this is hardware design flaw not software ?) */ outw(0x01, host->io_port + ISP_CTRL_STATUS); udelay(100); outw(HCCR_RESET, host->io_port + HOST_HCCR); udelay(100); outw(HCCR_RELEASE, host->io_port + HOST_HCCR); outw(HCCR_BIOS_DISABLE, host->io_port + HOST_HCCR); loop_count = DEFAULT_LOOP_COUNT; while (--loop_count && inw(host->io_port + HOST_HCCR) == RISC_BUSY) { barrier(); cpu_relax(); } if (!loop_count) printk("qlogicfc%d : reset_hardware loop timeout\n", hostdata->host_id); #if DEBUG_ISP2x00 printk("qlogicfc%d : mbox 0 0x%04x \n", hostdata->host_id, inw(host->io_port + MBOX0)); printk("qlogicfc%d : mbox 1 0x%04x \n", hostdata->host_id, inw(host->io_port + MBOX1)); printk("qlogicfc%d : mbox 2 0x%04x \n", hostdata->host_id, inw(host->io_port + MBOX2)); printk("qlogicfc%d : mbox 3 0x%04x \n", hostdata->host_id, inw(host->io_port + MBOX3)); printk("qlogicfc%d : mbox 4 0x%04x \n", hostdata->host_id, inw(host->io_port + MBOX4)); printk("qlogicfc%d : mbox 5 0x%04x \n", hostdata->host_id, inw(host->io_port + MBOX5)); printk("qlogicfc%d : mbox 6 0x%04x \n", hostdata->host_id, inw(host->io_port + MBOX6)); printk("qlogicfc%d : mbox 7 0x%04x \n", hostdata->host_id, inw(host->io_port + MBOX7)); #endif /* DEBUG_ISP2x00 */ DEBUG(printk("qlogicfc%d : verifying checksum\n", hostdata->host_id)); #if defined(CONFIG_SCSI_QLOGIC_FC_FIRMWARE) { int i; unsigned short * risc_code = NULL; unsigned short risc_code_len = 0; if (hostdata->pci_dev->device == PCI_DEVICE_ID_QLOGIC_ISP2100){ risc_code = risc_code2100; risc_code_len = risc_code_length2100; } else if (hostdata->pci_dev->device == PCI_DEVICE_ID_QLOGIC_ISP2200){ risc_code = risc_code2200; risc_code_len = risc_code_length2200; } for (i = 0; i < risc_code_len; i++) { param[0] = MBOX_WRITE_RAM_WORD; param[1] = risc_code_addr01 + i; param[2] = risc_code[i]; isp2x00_mbox_command(host, param); if (param[0] != MBOX_COMMAND_COMPLETE) { printk("qlogicfc%d : firmware load failure\n", hostdata->host_id); return 1; } } } #endif /* RELOAD_FIRMWARE */ param[0] = MBOX_VERIFY_CHECKSUM; param[1] = risc_code_addr01; isp2x00_mbox_command(host, param); if (param[0] != MBOX_COMMAND_COMPLETE) { printk("qlogicfc%d : ram checksum failure\n", hostdata->host_id); return 1; } DEBUG(printk("qlogicfc%d : executing firmware\n", hostdata->host_id)); param[0] = MBOX_EXEC_FIRMWARE; param[1] = risc_code_addr01; isp2x00_mbox_command(host, param); param[0] = MBOX_ABOUT_FIRMWARE; isp2x00_mbox_command(host, param); if (param[0] != MBOX_COMMAND_COMPLETE) { printk("qlogicfc%d : about firmware failure\n", hostdata->host_id); return 1; } DEBUG(printk("qlogicfc%d : firmware major revision %d\n", hostdata->host_id, param[1])); DEBUG(printk("qlogicfc%d : firmware minor revision %d\n", hostdata->host_id, param[2])); #ifdef USE_NVRAM_DEFAULTS if (isp2x00_get_nvram_defaults(host, &hostdata->control_block) != 0) { printk("qlogicfc%d : Could not read from NVRAM\n", hostdata->host_id); } #endif hostdata->wwn = (u64) (cpu_to_le16(hostdata->control_block.node_name[0])) << 56; hostdata->wwn |= (u64) (cpu_to_le16(hostdata->control_block.node_name[0]) & 0xff00) << 48; hostdata->wwn |= (u64) (cpu_to_le16(hostdata->control_block.node_name[1]) & 0xff00) << 24; hostdata->wwn |= (u64) (cpu_to_le16(hostdata->control_block.node_name[1]) & 0x00ff) << 48; hostdata->wwn |= (u64) (cpu_to_le16(hostdata->control_block.node_name[2]) & 0x00ff) << 24; hostdata->wwn |= (u64) (cpu_to_le16(hostdata->control_block.node_name[2]) & 0xff00) << 8; hostdata->wwn |= (u64) (cpu_to_le16(hostdata->control_block.node_name[3]) & 0x00ff) << 8; hostdata->wwn |= (u64) (cpu_to_le16(hostdata->control_block.node_name[3]) & 0xff00) >> 8; /* FIXME: If the DMA transfer goes one way only, this should use * PCI_DMA_TODEVICE and below as well. */ busaddr = pci_map_page(hostdata->pci_dev, virt_to_page(&hostdata->control_block), ((unsigned long) &hostdata->control_block & ~PAGE_MASK), sizeof(hostdata->control_block), PCI_DMA_BIDIRECTIONAL); param[0] = MBOX_INIT_FIRMWARE; param[2] = (u_short) (pci64_dma_lo32(busaddr) >> 16); param[3] = (u_short) (pci64_dma_lo32(busaddr) & 0xffff); param[4] = 0; param[5] = 0; param[6] = (u_short) (pci64_dma_hi32(busaddr) >> 16); param[7] = (u_short) (pci64_dma_hi32(busaddr) & 0xffff); isp2x00_mbox_command(host, param); if (param[0] != MBOX_COMMAND_COMPLETE) { printk("qlogicfc%d.c: Ouch 0x%04x\n", hostdata->host_id, param[0]); pci_unmap_page(hostdata->pci_dev, busaddr, sizeof(hostdata->control_block), PCI_DMA_BIDIRECTIONAL); return 1; } param[0] = MBOX_GET_FIRMWARE_STATE; isp2x00_mbox_command(host, param); if (param[0] != MBOX_COMMAND_COMPLETE) { printk("qlogicfc%d.c: 0x%04x\n", hostdata->host_id, param[0]); pci_unmap_page(hostdata->pci_dev, busaddr, sizeof(hostdata->control_block), PCI_DMA_BIDIRECTIONAL); return 1; } pci_unmap_page(hostdata->pci_dev, busaddr, sizeof(hostdata->control_block), PCI_DMA_BIDIRECTIONAL); LEAVE("isp2x00_reset_hardware"); return 0; } #ifdef USE_NVRAM_DEFAULTS static int isp2x00_get_nvram_defaults(struct Scsi_Host *host, struct init_cb *control_block) { u_short value; if (isp2x00_read_nvram_word(host, 0) != 0x5349) return 1; value = isp2x00_read_nvram_word(host, 8); control_block->node_name[0] = cpu_to_le16(isp2x00_read_nvram_word(host, 9)); control_block->node_name[1] = cpu_to_le16(isp2x00_read_nvram_word(host, 10)); control_block->node_name[2] = cpu_to_le16(isp2x00_read_nvram_word(host, 11)); control_block->node_name[3] = cpu_to_le16(isp2x00_read_nvram_word(host, 12)); control_block->hard_addr = cpu_to_le16(isp2x00_read_nvram_word(host, 13)); return 0; } #endif static int isp2x00_init(struct Scsi_Host *sh) { u_long io_base; struct isp2x00_hostdata *hostdata; u_char revision; u_int irq; u_short command; struct pci_dev *pdev; ENTER("isp2x00_init"); hostdata = (struct isp2x00_hostdata *) sh->hostdata; pdev = hostdata->pci_dev; if (pci_read_config_word(pdev, PCI_COMMAND, &command) || pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision)) { printk("qlogicfc%d : error reading PCI configuration\n", hostdata->host_id); return 1; } io_base = pci_resource_start(pdev, 0); irq = pdev->irq; if (pdev->vendor != PCI_VENDOR_ID_QLOGIC) { printk("qlogicfc%d : 0x%04x is not QLogic vendor ID\n", hostdata->host_id, pdev->vendor); return 1; } if (pdev->device != PCI_DEVICE_ID_QLOGIC_ISP2100 && pdev->device != PCI_DEVICE_ID_QLOGIC_ISP2200) { printk("qlogicfc%d : 0x%04x does not match ISP2100 or ISP2200 device id\n", hostdata->host_id, pdev->device); return 1; } if (!(command & PCI_COMMAND_IO) || !(pdev->resource[0].flags & IORESOURCE_IO)) { printk("qlogicfc%d : i/o mapping is disabled\n", hostdata->host_id); return 1; } if (!(command & PCI_COMMAND_MASTER)) { printk("qlogicfc%d : bus mastering is disabled\n", hostdata->host_id); return 1; } if (revision != ISP2100_REV_ID1 && revision != ISP2100_REV_ID3 && revision != ISP2200_REV_ID5) printk("qlogicfc%d : new isp2x00 revision ID (%d)\n", hostdata->host_id, revision); hostdata->revision = revision; sh->irq = irq; sh->io_port = io_base; LEAVE("isp2x00_init"); return 0; } #if USE_NVRAM_DEFAULTS #define NVRAM_DELAY() udelay(10) /* 10 microsecond delay */ u_short isp2x00_read_nvram_word(struct Scsi_Host * host, u_short byte) { int i; u_short value, output, input; outw(0x2, host->io_port + PCI_NVRAM); NVRAM_DELAY(); outw(0x3, host->io_port + PCI_NVRAM); NVRAM_DELAY(); byte &= 0xff; byte |= 0x0600; for (i = 10; i >= 0; i--) { output = ((byte >> i) & 0x1) ? 0x4 : 0x0; outw(output | 0x2, host->io_port + PCI_NVRAM); NVRAM_DELAY(); outw(output | 0x3, host->io_port + PCI_NVRAM); NVRAM_DELAY(); outw(output | 0x2, host->io_port + PCI_NVRAM); NVRAM_DELAY(); } for (i = 0xf, value = 0; i >= 0; i--) { value <<= 1; outw(0x3, host->io_port + PCI_NVRAM); NVRAM_DELAY(); input = inw(host->io_port + PCI_NVRAM); NVRAM_DELAY(); outw(0x2, host->io_port + PCI_NVRAM); NVRAM_DELAY(); if (input & 0x8) value |= 1; } outw(0x0, host->io_port + PCI_NVRAM); NVRAM_DELAY(); return value; } #endif /* USE_NVRAM_DEFAULTS */ /* * currently, this is only called during initialization or abort/reset, * at which times interrupts are disabled, so polling is OK, I guess... */ static int isp2x00_mbox_command(struct Scsi_Host *host, u_short param[]) { int loop_count; struct isp2x00_hostdata *hostdata = (struct isp2x00_hostdata *) host->hostdata; if (mbox_param[param[0]] == 0 || hostdata->adapter_state == AS_FIRMWARE_DEAD) return 1; loop_count = DEFAULT_LOOP_COUNT; while (--loop_count && inw(host->io_port + HOST_HCCR) & 0x0080) { barrier(); cpu_relax(); } if (!loop_count) { printk("qlogicfc%d : mbox_command loop timeout #1\n", hostdata->host_id); param[0] = 0x4006; hostdata->adapter_state = AS_FIRMWARE_DEAD; return 1; } hostdata->mbox_done = 0; if (mbox_param[param[0]] == 0) printk("qlogicfc%d : invalid mbox command\n", hostdata->host_id); if (mbox_param[param[0]] & 0x80) outw(param[7], host->io_port + MBOX7); if (mbox_param[param[0]] & 0x40) outw(param[6], host->io_port + MBOX6); if (mbox_param[param[0]] & 0x20) outw(param[5], host->io_port + MBOX5); if (mbox_param[param[0]] & 0x10) outw(param[4], host->io_port + MBOX4); if (mbox_param[param[0]] & 0x08) outw(param[3], host->io_port + MBOX3); if (mbox_param[param[0]] & 0x04) outw(param[2], host->io_port + MBOX2); if (mbox_param[param[0]] & 0x02) outw(param[1], host->io_port + MBOX1); if (mbox_param[param[0]] & 0x01) outw(param[0], host->io_port + MBOX0); outw(HCCR_SET_HOST_INTR, host->io_port + HOST_HCCR); while (1) { loop_count = DEFAULT_LOOP_COUNT; while (--loop_count && !(inw(host->io_port + PCI_INTER_STS) & 0x08)) { barrier(); cpu_relax(); } if (!loop_count) { hostdata->adapter_state = AS_FIRMWARE_DEAD; printk("qlogicfc%d : mbox_command loop timeout #2\n", hostdata->host_id); break; } isp2x00_intr_handler(host->irq, host, NULL); if (hostdata->mbox_done == 1) break; } loop_count = DEFAULT_LOOP_COUNT; while (--loop_count && inw(host->io_port + MBOX0) == 0x04) { barrier(); cpu_relax(); } if (!loop_count) printk("qlogicfc%d : mbox_command loop timeout #3\n", hostdata->host_id); param[7] = inw(host->io_port + MBOX7); param[6] = inw(host->io_port + MBOX6); param[5] = inw(host->io_port + MBOX5); param[4] = inw(host->io_port + MBOX4); param[3] = inw(host->io_port + MBOX3); param[2] = inw(host->io_port + MBOX2); param[1] = inw(host->io_port + MBOX1); param[0] = inw(host->io_port + MBOX0); outw(0x0, host->io_port + PCI_SEMAPHORE); if (inw(host->io_port + HOST_HCCR) & 0x0080) { hostdata->adapter_state = AS_FIRMWARE_DEAD; printk("qlogicfc%d : mbox op is still pending\n", hostdata->host_id); } return 0; } #if DEBUG_ISP2x00_INTR void isp2x00_print_status_entry(struct Status_Entry *status) { printk("qlogicfc : entry count = 0x%02x, type = 0x%02x, flags = 0x%02x\n", status->hdr.entry_cnt, status->hdr.entry_type, status->hdr.flags); printk("qlogicfc : scsi status = 0x%04x, completion status = 0x%04x\n", le16_to_cpu(status->scsi_status), le16_to_cpu(status->completion_status)); printk("qlogicfc : state flags = 0x%04x, status flags = 0x%04x\n", le16_to_cpu(status->state_flags), le16_to_cpu(status->status_flags)); printk("qlogicfc : response info length = 0x%04x, request sense length = 0x%04x\n", le16_to_cpu(status->res_info_len), le16_to_cpu(status->req_sense_len)); printk("qlogicfc : residual transfer length = 0x%08x, response = 0x%02x\n", le32_to_cpu(status->residual), status->res_info[3]); } #endif /* DEBUG_ISP2x00_INTR */ #if DEBUG_ISP2x00 void isp2x00_print_scsi_cmd(Scsi_Cmnd * cmd) { int i; printk("qlogicfc : target = 0x%02x, lun = 0x%02x, cmd_len = 0x%02x\n", cmd->target, cmd->lun, cmd->cmd_len); printk("qlogicfc : command = "); for (i = 0; i < cmd->cmd_len; i++) printk("0x%02x ", cmd->cmnd[i]); printk("\n"); } #endif /* DEBUG_ISP2x00 */ MODULE_LICENSE("GPL"); static Scsi_Host_Template driver_template = QLOGICFC; #include "scsi_module.c"