/* * Header file for USB IBM C-It Video Camera driver. * * Supports IBM C-It Video Camera. * * This driver is based on earlier work of: * * (C) Copyright 1999 Johannes Erdfelt * (C) Copyright 1999 Randy Dunlap */ #ifndef __LINUX_IBMCAM_H #define __LINUX_IBMCAM_H #include #define USES_IBMCAM_PUTPIXEL 0 /* 0=Fast/oops 1=Slow/secure */ /* Video Size 384 x 288 x 3 bytes for RGB */ /* 384 because xawtv tries to grab 384 even though we tell it 352 is our max */ #define V4L_FRAME_WIDTH 384 #define V4L_FRAME_WIDTH_USED 352 #define V4L_FRAME_HEIGHT 288 #define V4L_BYTES_PER_PIXEL 3 #define MAX_FRAME_SIZE (V4L_FRAME_WIDTH * V4L_FRAME_HEIGHT * V4L_BYTES_PER_PIXEL) /* Camera capabilities (maximum) */ #define CAMERA_IMAGE_WIDTH 352 #define CAMERA_IMAGE_HEIGHT 288 #define CAMERA_IMAGE_LINE_SZ ((CAMERA_IMAGE_WIDTH * 3) / 2) /* Bytes */ #define CAMERA_URB_FRAMES 32 #define CAMERA_MAX_ISO_PACKET 1023 /* 1022 actually sent by camera */ #define IBMCAM_NUMFRAMES 2 #define IBMCAM_NUMSBUF 2 #define FRAMES_PER_DESC (CAMERA_URB_FRAMES) #define FRAME_SIZE_PER_DESC (CAMERA_MAX_ISO_PACKET) /* This macro restricts an int variable to an inclusive range */ #define RESTRICT_TO_RANGE(v,mi,ma) { if ((v) < (mi)) (v) = (mi); else if ((v) > (ma)) (v) = (ma); } /* * This macro performs bounds checking - use it when working with * new formats, or else you may get oopses all over the place. * If pixel falls out of bounds then it gets shoved back (as close * to place of offence as possible) and is painted bright red. */ #define IBMCAM_PUTPIXEL(fr, ix, iy, vr, vg, vb) { \ register unsigned char *pf; \ int limiter = 0, mx, my; \ mx = ix; \ my = iy; \ if (mx < 0) { \ mx=0; \ limiter++; \ } else if (mx >= 352) { \ mx=351; \ limiter++; \ } \ if (my < 0) { \ my = 0; \ limiter++; \ } else if (my >= V4L_FRAME_HEIGHT) { \ my = V4L_FRAME_HEIGHT - 1; \ limiter++; \ } \ pf = (fr)->data + V4L_BYTES_PER_PIXEL*((iy)*352 + (ix)); \ if (limiter) { \ *pf++ = 0; \ *pf++ = 0; \ *pf++ = 0xFF; \ } else { \ *pf++ = (vb); \ *pf++ = (vg); \ *pf++ = (vr); \ } \ } /* * We use macros to do YUV -> RGB conversion because this is * very important for speed and totally unimportant for size. * * YUV -> RGB Conversion * --------------------- * * B = 1.164*(Y-16) + 2.018*(V-128) * G = 1.164*(Y-16) - 0.813*(U-128) - 0.391*(V-128) * R = 1.164*(Y-16) + 1.596*(U-128) * * If you fancy integer arithmetics (as you should), hear this: * * 65536*B = 76284*(Y-16) + 132252*(V-128) * 65536*G = 76284*(Y-16) - 53281*(U-128) - 25625*(V-128) * 65536*R = 76284*(Y-16) + 104595*(U-128) * * Make sure the output values are within [0..255] range. */ #define LIMIT_RGB(x) (((x) < 0) ? 0 : (((x) > 255) ? 255 : (x))) #define YUV_TO_RGB_BY_THE_BOOK(my,mu,mv,mr,mg,mb) { \ int mm_y, mm_yc, mm_u, mm_v, mm_r, mm_g, mm_b; \ mm_y = (my) - 16; \ mm_u = (mu) - 128; \ mm_v = (mv) - 128; \ mm_yc= mm_y * 76284; \ mm_b = (mm_yc + 132252*mm_v ) >> 16; \ mm_g = (mm_yc - 53281*mm_u - 25625*mm_v ) >> 16; \ mm_r = (mm_yc + 104595*mm_u ) >> 16; \ mb = LIMIT_RGB(mm_b); \ mg = LIMIT_RGB(mm_g); \ mr = LIMIT_RGB(mm_r); \ } /* Debugging aid */ #define IBMCAM_SAY_AND_WAIT(what) { \ wait_queue_head_t wq; \ init_waitqueue_head(&wq); \ printk(KERN_INFO "Say: %s\n", what); \ interruptible_sleep_on_timeout (&wq, HZ*3); \ } /* * This macro checks if ibmcam is still operational. The 'ibmcam' * pointer must be valid, ibmcam->dev must be valid, we are not * removing the device and the device has not erred on us. */ #define IBMCAM_IS_OPERATIONAL(ibm_cam) (\ (ibm_cam != NULL) && \ ((ibm_cam)->dev != NULL) && \ ((ibm_cam)->last_error == 0) && \ (!(ibm_cam)->remove_pending)) enum { STATE_SCANNING, /* Scanning for header */ STATE_LINES, /* Parsing lines */ }; enum { FRAME_UNUSED, /* Unused (no MCAPTURE) */ FRAME_READY, /* Ready to start grabbing */ FRAME_GRABBING, /* In the process of being grabbed into */ FRAME_DONE, /* Finished grabbing, but not been synced yet */ FRAME_ERROR, /* Something bad happened while processing */ }; struct usb_device; struct ibmcam_sbuf { char *data; urb_t *urb; }; struct ibmcam_frame { char *data; /* Frame buffer */ int order_uv; /* True=UV False=VU */ int order_yc; /* True=Yc False=cY ('c'=either U or V) */ unsigned char hdr_sig; /* "00 FF 00 ??" where 'hdr_sig' is '??' */ int width; /* Width application is expecting */ int height; /* Height */ int frmwidth; /* Width the frame actually is */ int frmheight; /* Height */ volatile int grabstate; /* State of grabbing */ int scanstate; /* State of scanning */ int curline; /* Line of frame we're working on */ long scanlength; /* uncompressed, raw data length of frame */ long bytes_read; /* amount of scanlength that has been read from *data */ wait_queue_head_t wq; /* Processes waiting */ }; #define IBMCAM_MODEL_1 1 /* XVP-501, 3 interfaces, rev. 0.02 */ #define IBMCAM_MODEL_2 2 /* KSX-X9903, 2 interfaces, rev. 3.0a */ struct usb_ibmcam { struct video_device vdev; /* Device structure */ struct usb_device *dev; unsigned char iface; /* Video interface number */ unsigned char ifaceAltActive, ifaceAltInactive; /* Alt settings */ struct semaphore lock; int user; /* user count for exclusive use */ int ibmcam_used; /* Is this structure in use? */ int initialized; /* Had we already sent init sequence? */ int camera_model; /* What type of IBM camera we got? */ int streaming; /* Are we streaming Isochronous? */ int grabbing; /* Are we grabbing? */ int last_error; /* What calamity struck us? */ int compress; /* Should the next frame be compressed? */ char *fbuf; /* Videodev buffer area */ int fbuf_size; /* Videodev buffer size */ int curframe; struct ibmcam_frame frame[IBMCAM_NUMFRAMES]; /* Double buffering */ int cursbuf; /* Current receiving sbuf */ struct ibmcam_sbuf sbuf[IBMCAM_NUMSBUF]; /* Double buffering */ volatile int remove_pending; /* If set then about to exit */ /* * Scratch space from the Isochronous pipe. * Scratch buffer should contain at least one pair of lines * (CAMERA_IMAGE_LINE_SZ). We set it to two pairs here. * This will be approximately 2 KB. HOWEVER in reality this * buffer must be as large as hundred of KB because otherwise * you'll get lots of overflows because V4L client may request * frames not as uniformly as USB sources them. */ unsigned char *scratch; int scratchlen; struct video_picture vpic, vpic_old; /* Picture settings */ struct video_capability vcap; /* Video capabilities */ struct video_channel vchan; /* May be used for tuner support */ unsigned char video_endp; /* 0x82 for IBM camera */ int has_hdr; int frame_num; int iso_packet_len; /* Videomode-dependent, saves bus bandwidth */ /* Statistics that can be overlayed on screen */ unsigned long urb_count; /* How many URBs we received so far */ unsigned long urb_length; /* Length of last URB */ unsigned long data_count; /* How many bytes we received */ unsigned long header_count; /* How many frame headers we found */ unsigned long scratch_ovf_count;/* How many times we overflowed scratch */ unsigned long iso_skip_count; /* How many empty ISO packets received */ unsigned long iso_err_count; /* How many bad ISO packets received */ }; #endif /* __LINUX_IBMCAM_H */