/*
 *  linux/drivers/usb/usb-ohci-sa1111.c
 *
 *  The outline of this code was taken from Brad Parkers <brad@heeltoe.com>
 *  original OHCI driver modifications, and reworked into a cleaner form
 *  by Russell King <rmk@arm.linux.org.uk>.
 */
#include <linux/module.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/usb.h>

#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/arch/assabet.h>

#include "usb-ohci.h"

int __devinit
hc_add_ohci(struct pci_dev *dev, int irq, void *membase, unsigned long flags,
	    ohci_t **ohci, const char *name, const char *slot_name);
extern void hc_remove_ohci(ohci_t *ohci);

static ohci_t *sa1111_ohci;

static void __init sa1111_ohci_configure(void)
{
	unsigned int usb_rst = 0;

	if (machine_is_xp860() ||
	    machine_has_neponset() ||
	    machine_is_pfs168())
		usb_rst = USB_RESET_PWRSENSELOW | USB_RESET_PWRCTRLLOW;

	/*
	 * Configure the power sense and control lines.  Place the USB
	 * host controller in reset.
	 */
	USB_RESET = usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET;

	/*
	 * Now, carefully enable the USB clock, and take
	 * the USB host controller out of reset.
	 */
	SKPCR |= SKPCR_UCLKEN;
	udelay(11);
	USB_RESET = usb_rst;
}

static int __init sa1111_ohci_init(void)
{
	int ret;

	/*
	 * Request memory resources.
	 */
//	if (!request_mem_region(_USB_OHCI_OP_BASE, _USB_EXTENT, "usb-ohci"))
//		return -EBUSY;

	sa1111_ohci_configure();

	/*
	 * Initialise the generic OHCI driver.
	 */
	ret = hc_add_ohci((struct pci_dev *)1, NIRQHCIM,
			  (void *)&USB_OHCI_OP_BASE, 0, &sa1111_ohci,
			  "usb-ohci", "sa1111");

//	if (ret)
//		release_mem_region(_USB_OHCI_OP_BASE, _USB_EXTENT);

	return ret;
}

static void __exit sa1111_ohci_exit(void)
{
	hc_remove_ohci(sa1111_ohci);

	/*
	 * Put the USB host controller into reset.
	 */
	USB_RESET |= USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET;

	/*
	 * Stop the USB clock.
	 */
	SKPCR &= ~SKPCR_UCLKEN;

	/*
	 * Release memory resources.
	 */
//	release_mem_region(_USB_OHCI_OP_BASE, _USB_EXTENT);
}

module_init(sa1111_ohci_init);
module_exit(sa1111_ohci_exit);