#ifndef __ASM_SH_PCI_H
#define __ASM_SH_PCI_H

#ifdef __KERNEL__

#include <linux/config.h>

/* Can be used to override the logic in pci_scan_bus for skipping
   already-configured bus numbers - to be used for buggy BIOSes
   or architectures with incomplete PCI setup by the loader */

#define pcibios_assign_all_busses()	1

#if defined(CONFIG_CPU_SUBTYPE_ST40STB1)
/* These are currently the correct values for the STM overdrive board. 
 * We need some way of setting this on a board specific way, it will 
 * not be the same on other boards I think
 */
#define PCIBIOS_MIN_IO		0x2000
#define PCIBIOS_MIN_MEM		0x10000000

#elif defined(CONFIG_SH_DREAMCAST)
#define PCIBIOS_MIN_IO		0x2000
#define PCIBIOS_MIN_MEM		0x10000000
#elif defined(CONFIG_SH_BIGSUR) && defined(CONFIG_CPU_SUBTYPE_SH7751)
#define PCIBIOS_MIN_IO		0x2000
#define PCIBIOS_MIN_MEM		0xFD000000

#elif defined(CONFIG_SH_7751_SOLUTION_ENGINE)
#define PCIBIOS_MIN_IO          0x4000
#define PCIBIOS_MIN_MEM         0xFD000000
#endif

struct pci_dev;

extern void pcibios_set_master(struct pci_dev *dev);

static inline void pcibios_penalize_isa_irq(int irq)
{
	/* We don't do dynamic PCI IRQ allocation */
}

/* Dynamic DMA mapping stuff.
 * SuperH has everything mapped statically like x86.
 */

#include <linux/types.h>
#include <linux/slab.h>
#include <asm/scatterlist.h>
#include <linux/string.h>
#include <asm/io.h>

/* Allocate and map kernel buffer using consistent mode DMA for a device.
 * hwdev should be valid struct pci_dev pointer for PCI devices,
 * NULL for PCI-like buses (ISA, EISA).
 * Returns non-NULL cpu-view pointer to the buffer if successful and
 * sets *dma_addrp to the pci side dma address as well, else *dma_addrp
 * is undefined.
 */
extern void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
				  dma_addr_t *dma_handle);

/* Free and unmap a consistent DMA buffer.
 * cpu_addr is what was returned from pci_alloc_consistent,
 * size must be the same as what as passed into pci_alloc_consistent,
 * and likewise dma_addr must be the same as what *dma_addrp was set to.
 *
 * References to the memory and mappings associated with cpu_addr/dma_addr
 * past this call are illegal.
 */
extern void pci_free_consistent(struct pci_dev *hwdev, size_t size,
				void *vaddr, dma_addr_t dma_handle);

/* Map a single buffer of the indicated size for DMA in streaming mode.
 * The 32-bit bus address to use is returned.
 *
 * Once the device is given the dma address, the device owns this memory
 * until either pci_unmap_single or pci_dma_sync_single is performed.
 */
static inline dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr,
					size_t size, int direction)
{
	if (direction == PCI_DMA_NONE)
                BUG();

#ifdef CONFIG_SH_PCIDMA_NONCOHERENT
	dma_cache_wback_inv(ptr, size);
#endif
	return virt_to_bus(ptr);
}

/* Unmap a single streaming mode DMA translation.  The dma_addr and size
 * must match what was provided for in a previous pci_map_single call.  All
 * other usages are undefined.
 *
 * After this call, reads by the cpu to the buffer are guarenteed to see
 * whatever the device wrote there.
 */
static inline void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr,
				    size_t size,int direction)
{
	/* Nothing to do */
}

/* Map a set of buffers described by scatterlist in streaming
 * mode for DMA.  This is the scather-gather version of the
 * above pci_map_single interface.  Here the scatter gather list
 * elements are each tagged with the appropriate dma address
 * and length.  They are obtained via sg_dma_{address,length}(SG).
 *
 * NOTE: An implementation may be able to use a smaller number of
 *       DMA address/length pairs than there are SG table elements.
 *       (for example via virtual mapping capabilities)
 *       The routine returns the number of addr/length pairs actually
 *       used, at most nents.
 *
 * Device ownership issues as mentioned above for pci_map_single are
 * the same here.
 */
static inline int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
			     int nents, int direction)
{
#ifdef CONFIG_SH_PCIDMA_NONCOHERENT
	int i;

	for (i=0; i<nents; i++)
		dma_cache_wback_inv(sg[i].address, sg[i].length);
#endif
	if (direction == PCI_DMA_NONE)
                BUG();

	return nents;
}

/* Unmap a set of streaming mode DMA translations.
 * Again, cpu read rules concerning calls here are the same as for
 * pci_unmap_single() above.
 */
static inline void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg,
				int nents, int direction)
{
	/* Nothing to do */
}

/* Make physical memory consistent for a single
 * streaming mode DMA translation after a transfer.
 *
 * If you perform a pci_map_single() but wish to interrogate the
 * buffer using the cpu, yet do not wish to teardown the PCI dma
 * mapping, you must call this function before doing so.  At the
 * next point you give the PCI dma address back to the card, the
 * device again owns the buffer.
 */
static inline void pci_dma_sync_single(struct pci_dev *hwdev,
				       dma_addr_t dma_handle,
				       size_t size, int direction)
{
	if (direction == PCI_DMA_NONE)
                BUG();

#ifdef CONFIG_SH_PCIDMA_NONCOHERENT
	dma_cache_wback_inv(bus_to_virt(dma_handle), size);
#endif
	
}

/* Make physical memory consistent for a set of streaming
 * mode DMA translations after a transfer.
 *
 * The same as pci_dma_sync_single but for a scatter-gather list,
 * same rules and usage.
 */
static inline void pci_dma_sync_sg(struct pci_dev *hwdev,
				   struct scatterlist *sg,
				   int nelems, int direction)
{
	if (direction == PCI_DMA_NONE)
                BUG();

#ifdef CONFIG_SH_PCIDMA_NONCOHERENT
	int i;

	for (i=0; i<nelems; i++)
		dma_cache_wback_inv(sg[i].address, sg[i].length);
#endif
}


/* Return whether the given PCI device DMA address mask can
 * be supported properly.  For example, if your device can
 * only drive the low 24-bits during PCI bus mastering, then
 * you would pass 0x00ffffff as the mask to this function.
 */
static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask)
{
	return 1;
}

/* Not supporting more than 32-bit PCI bus addresses now, but
 * must satisfy references to this function.  Change if needed.
 */
#define pci_dac_dma_supported(pci_dev, mask) (0)

/* Return the index of the PCI controller for device PDEV. */
#define pci_controller_num(PDEV)	(0)

/* These macros should be used after a pci_map_sg call has been done
 * to get bus addresses of each of the SG entries and their lengths.
 * You should only work with the number of sg entries pci_map_sg
 * returns, or alternatively stop on the first sg_dma_len(sg) which
 * is 0.
 */
#define sg_dma_address(sg)	(virt_to_bus((sg)->address))
#define sg_dma_len(sg)		((sg)->length)

#endif /* __KERNEL__ */


#endif /* __ASM_SH_PCI_H */