/********************************************************************* * * Filename: toshoboe.h * Version: 0.1 * Description: Driver for the Toshiba OBOE (or type-O) * FIR Chipset. * Status: Experimental. * Author: James McKenzie * Created at: Sat May 8 12:35:27 1999 * * Copyright (c) 1999-2000 James McKenzie, All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * Neither James McKenzie nor Cambridge University admit liability nor * provide warranty for any of this software. This material is * provided "AS-IS" and at no charge. * * Applicable Models : Libretto 100CT. and many more * ********************************************************************/ #ifndef TOSHOBOE_H #define TOSHOBOE_H /* Registers */ /*Receive and transmit task registers (read only) */ #define OBOE_RCVT (0x00+(self->base)) #define OBOE_XMTT (0x01+(self->base)) #define OBOE_XMTT_OFFSET 0x40 /*Page pointers to the TaskFile structure */ #define OBOE_TFP2 (0x02+(self->base)) #define OBOE_TFP0 (0x04+(self->base)) #define OBOE_TFP1 (0x05+(self->base)) /*Dunno */ #define OBOE_REG_3 (0x03+(self->base)) /*Number of tasks to use in Xmit and Recv queues */ #define OBOE_NTR (0x07+(self->base)) #define OBOE_NTR_XMIT4 0x00 #define OBOE_NTR_XMIT8 0x10 #define OBOE_NTR_XMIT16 0x30 #define OBOE_NTR_XMIT32 0x70 #define OBOE_NTR_XMIT64 0xf0 #define OBOE_NTR_RECV4 0x00 #define OBOE_NTR_RECV8 0x01 #define OBOE_NTR_RECV6 0x03 #define OBOE_NTR_RECV32 0x07 #define OBOE_NTR_RECV64 0x0f /* Dunno */ #define OBOE_REG_9 (0x09+(self->base)) /* Interrupt Status Register */ #define OBOE_ISR (0x0c+(self->base)) #define OBOE_ISR_TXDONE 0x80 #define OBOE_ISR_RXDONE 0x40 #define OBOE_ISR_20 0x20 #define OBOE_ISR_10 0x10 #define OBOE_ISR_8 0x08 /*This is collision or parity or something */ #define OBOE_ISR_4 0x08 #define OBOE_ISR_2 0x08 #define OBOE_ISR_1 0x08 /*Dunno */ #define OBOE_REG_D (0x0d+(self->base)) /*Register Lock Register */ #define OBOE_LOCK ((self->base)+0x0e) /*Speed control registers */ #define OBOE_PMDL (0x10+(self->base)) #define OBOE_PMDL_SIR 0x18 #define OBOE_PMDL_MIR 0xa0 #define OBOE_PMDL_FIR 0x40 #define OBOE_SMDL (0x18+(self->base)) #define OBOE_SMDL_SIR 0x20 #define OBOE_SMDL_MIR 0x01 #define OBOE_SMDL_FIR 0x0f #define OBOE_UDIV (0x19+(self->base)) /*Dunno */ #define OBOE_REG_11 (0x11+(self->base)) /*Chip Reset Register */ #define OBOE_RST (0x15+(self->base)) #define OBOE_RST_WRAP 0x8 /*Dunno */ #define OBOE_REG_1A (0x1a+(self->base)) #define OBOE_REG_1B (0x1b+(self->base)) /* The PCI ID of the OBOE chip */ #ifndef PCI_DEVICE_ID_FIR701 #define PCI_DEVICE_ID_FIR701 0x0701 #endif typedef unsigned int dword; typedef unsigned short int word; typedef unsigned char byte; typedef dword Paddr; struct OboeTask { __u16 len; __u8 unused; __u8 control; __u32 buffer; }; #define OBOE_NTASKS 64 struct OboeTaskFile { struct OboeTask recv[OBOE_NTASKS]; struct OboeTask xmit[OBOE_NTASKS]; }; #define OBOE_TASK_BUF_LEN (sizeof(struct OboeTaskFile) << 1) /*These set the number of slots in use */ #define TX_SLOTS 4 #define RX_SLOTS 4 /* You need also to change this, toshiba uses 4,8 and 4,4 */ /* It makes no difference if you are only going to use ONETASK mode */ /* remember each buffer use XX_BUF_SZ more _PHYSICAL_ memory */ #define OBOE_NTR_VAL (OBOE_NTR_XMIT4 | OBOE_NTR_RECV4) struct toshoboe_cb { struct net_device *netdev; /* Yes! we are some kind of netdevice */ struct net_device_stats stats; struct irlap_cb *irlap; /* The link layer we are binded to */ struct qos_info qos; /* QoS capabilities for this device */ chipio_t io; /* IrDA controller information */ __u32 flags; /* Interface flags */ __u32 new_speed; struct pci_dev *pdev; /*PCI device */ int base; /*IO base */ int txpending; /*how many tx's are pending */ int txs, rxs; /*Which slots are we at */ void *taskfilebuf; /*The unaligned taskfile buffer */ struct OboeTaskFile *taskfile; /*The taskfile */ void *xmit_bufs[TX_SLOTS]; /*The buffers */ void *recv_bufs[RX_SLOTS]; int open; int stopped; /*Stopped by some or other APM stuff*/ }; #endif