--- zzzz-none-000/linux-2.4.17/drivers/pcmcia/sa1100_flexanet.c	2001-10-11 16:43:29.000000000 +0000
+++ sangam-fb-322/linux-2.4.17/drivers/pcmcia/sa1100_flexanet.c	2004-11-24 13:23:45.000000000 +0000
@@ -4,7 +4,6 @@
  * PCMCIA implementation routines for Flexanet.
  * by Jordi Colomer, 09/05/2001
  *
- * Yet to be defined.
  */
 
 #include <linux/kernel.h>
@@ -14,6 +13,15 @@
 #include <asm/irq.h>
 #include <asm/arch/pcmcia.h>
 
+static struct {
+  int irq;
+  const char *name;
+} irqs[] = {
+  { IRQ_GPIO_CF1_CD,   "CF1_CD"   },
+  { IRQ_GPIO_CF1_BVD1, "CF1_BVD1" },
+  { IRQ_GPIO_CF2_CD,   "CF2_CD"   },
+  { IRQ_GPIO_CF2_BVD1, "CF2_BVD1" }
+};
 
 /*
  * Socket initialization.
@@ -22,9 +30,37 @@
  * Must return the number of slots.
  *
  */
-static int flexanet_pcmcia_init(struct pcmcia_init *init){
+static int flexanet_pcmcia_init(struct pcmcia_init *init)
+{
+  int i, res;
 
-  return 0;
+  /* Configure the GPIOs as inputs (BVD2 is not implemented) */
+  GPDR &= ~(GPIO_CF1_NCD | GPIO_CF1_BVD1 | GPIO_CF1_IRQ |
+            GPIO_CF2_NCD | GPIO_CF2_BVD1 | GPIO_CF2_IRQ );
+
+  /* Set IRQ edge */
+  set_GPIO_IRQ_edge( GPIO_CF1_NCD | GPIO_CF1_BVD1 |
+                     GPIO_CF2_NCD | GPIO_CF2_BVD1, GPIO_BOTH_EDGES );
+  set_GPIO_IRQ_edge( GPIO_CF1_IRQ | GPIO_CF2_IRQ, GPIO_FALLING_EDGE );
+
+  /* Register the socket interrupts (not the card interrupts) */
+  for (i = 0; i < ARRAY_SIZE(irqs); i++) {
+    res = request_irq(irqs[i].irq, init->handler, SA_INTERRUPT,
+		      irqs[i].name, NULL);
+    if (res < 0)
+      break;
+  }
+
+  /* If we failed, then free all interrupts requested thus far. */
+  if (res < 0) {
+    printk(KERN_ERR "%s: Request for IRQ%u failed: %d\n", __FUNCTION__,
+           irqs[i].irq, res);
+    for (; i >= 0; i--)
+      free_irq(irqs[i].irq, NULL);
+    return -1;
+  }
+
+  return 2;
 }
 
 
@@ -34,6 +70,12 @@
  */
 static int flexanet_pcmcia_shutdown(void)
 {
+  int i;
+
+  /* disable IRQs */
+  for (i = ARRAY_SIZE(irqs) - 1; i >= 0; i--)
+    free_irq(irqs[i].irq, NULL);
+
   return 0;
 }
 
@@ -46,7 +88,37 @@
  */
 static int flexanet_pcmcia_socket_state(struct pcmcia_state_array
 				       *state_array){
-  return -1;
+  unsigned long levels;
+
+  if (state_array->size < 2)
+    return -1;
+
+  /* clear the result array */
+  memset(state_array->state, 0,
+	 (state_array->size)*sizeof(struct pcmcia_state));
+
+  /* Sense the GPIOs, asynchronously */
+  levels = GPLR;
+
+  /* Socket 0 */
+  state_array->state[0].detect = ((levels & GPIO_CF1_NCD)==0)?1:0;
+  state_array->state[0].ready  = (levels & GPIO_CF1_IRQ)?1:0;
+  state_array->state[0].bvd1   = (levels & GPIO_CF1_BVD1)?1:0;
+  state_array->state[0].bvd2   = 1;
+  state_array->state[0].wrprot = 0;
+  state_array->state[0].vs_3v  = 1;
+  state_array->state[0].vs_Xv  = 0;
+
+  /* Socket 1 */
+  state_array->state[1].detect = ((levels & GPIO_CF2_NCD)==0)?1:0;
+  state_array->state[1].ready  = (levels & GPIO_CF2_IRQ)?1:0;
+  state_array->state[1].bvd1   = (levels & GPIO_CF2_BVD1)?1:0;
+  state_array->state[1].bvd2   = 1;
+  state_array->state[1].wrprot = 0;
+  state_array->state[1].vs_3v  = 1;
+  state_array->state[1].vs_Xv  = 0;
+
+  return 1;
 }
 
 
@@ -56,7 +128,16 @@
  */
 static int flexanet_pcmcia_get_irq_info(struct pcmcia_irq_info *info){
 
-  return -1;
+  /* check the socket index */
+  if (info->sock > 1)
+    return -1;
+
+  if (info->sock == 0)
+    info->irq = IRQ_GPIO_CF1_IRQ;
+  else if (info->sock == 1)
+    info->irq = IRQ_GPIO_CF2_IRQ;
+
+  return 0;
 }
 
 
@@ -66,7 +147,50 @@
 static int flexanet_pcmcia_configure_socket(const struct pcmcia_configure
 					   *configure)
 {
-  return -1;
+  unsigned long value, flags, mask;
+
+
+  if (configure->sock > 1)
+    return -1;
+
+  /* Ignore the VCC level since it is 3.3V and always on */
+  switch (configure->vcc)
+  {
+    case 0:
+      printk(KERN_WARNING "%s(): CS asked to power off.\n", __FUNCTION__);
+      break;
+
+    case 50:
+      printk(KERN_WARNING "%s(): CS asked for 5V, applying 3.3V...\n",
+  	   __FUNCTION__);
+
+    case 33:
+      break;
+
+    default:
+      printk(KERN_ERR "%s(): unrecognized Vcc %u\n", __FUNCTION__,
+  	   configure->vcc);
+      return -1;
+  }
+
+  /* Reset the slot(s) using the controls in the BCR */
+  mask = 0;
+
+  switch (configure->sock)
+  {
+    case 0 : mask = FHH_BCR_CF1_RST; break;
+    case 1 : mask = FHH_BCR_CF2_RST; break;
+  }
+
+  save_flags_cli(flags);
+
+  value = flexanet_BCR;
+  value = (configure->reset) ? (value | mask) : (value & ~mask);
+  FHH_BCR = flexanet_BCR = value;
+
+  restore_flags(flags);
+
+  return 0;
 }