--- zzzz-none-000/linux-4.4.60/include/net/cfg80211.h 2017-04-08 07:53:53.000000000 +0000 +++ scorpion-1750e-727/linux-4.4.60/include/net/cfg80211.h 2021-02-04 17:41:59.000000000 +0000 @@ -402,6 +402,22 @@ }; /** + * struct cfg80211_fils_aad - FILS AAD data + * @macaddr: STA MAC address + * @kek: FILS KEK + * @kek_len: FILS KEK length + * @snonce: STA Nonce + * @anonce: AP Nonce + */ +struct cfg80211_fils_aad { + const u8 *macaddr; + const u8 *kek; + u8 kek_len; + const u8 *snonce; + const u8 *anonce; +}; + +/** * cfg80211_get_chandef_type - return old channel type from chandef * @chandef: the channel definition * @@ -712,6 +728,8 @@ * @p2p_opp_ps: P2P opportunistic PS * @acl: ACL configuration used by the drivers which has support for * MAC address based access control + * @pbss: If set, start as a PCP instead of AP. Relevant for DMG + * networks. */ struct cfg80211_ap_settings { struct cfg80211_chan_def chandef; @@ -730,6 +748,7 @@ u8 p2p_ctwindow; bool p2p_opp_ps; const struct cfg80211_acl_data *acl; + bool pbss; }; /** @@ -1723,11 +1742,16 @@ * @ASSOC_REQ_DISABLE_HT: Disable HT (802.11n) * @ASSOC_REQ_DISABLE_VHT: Disable VHT * @ASSOC_REQ_USE_RRM: Declare RRM capability in this association + * @CONNECT_REQ_EXTERNAL_AUTH_SUPPORT: User space indicates external + * authentication capability. Drivers can offload authentication to + * userspace if this flag is set. Only applicable for cfg80211_connect() + * request (connect callback). */ enum cfg80211_assoc_req_flags { - ASSOC_REQ_DISABLE_HT = BIT(0), - ASSOC_REQ_DISABLE_VHT = BIT(1), - ASSOC_REQ_USE_RRM = BIT(2), + ASSOC_REQ_DISABLE_HT = BIT(0), + ASSOC_REQ_DISABLE_VHT = BIT(1), + ASSOC_REQ_USE_RRM = BIT(2), + CONNECT_REQ_EXTERNAL_AUTH_SUPPORT = BIT(3), }; /** @@ -1888,6 +1912,8 @@ * @ht_capa_mask: The bits of ht_capa which are to be used. * @vht_capa: VHT Capability overrides * @vht_capa_mask: The bits of vht_capa which are to be used. + * @pbss: if set, connect to a PCP instead of AP. Valid for DMG + * networks. */ struct cfg80211_connect_params { struct ieee80211_channel *channel; @@ -1910,6 +1936,7 @@ struct ieee80211_ht_cap ht_capa_mask; struct ieee80211_vht_cap vht_capa; struct ieee80211_vht_cap vht_capa_mask; + bool pbss; }; /** @@ -2222,6 +2249,33 @@ }; /** + * struct cfg80211_external_auth_params - Trigger External authentication. + * + * Commonly used across the external auth request and event interfaces. + * + * @action: action type / trigger for external authentication. Only significant + * for the authentication request event interface (driver to user space). + * @bssid: BSSID of the peer with which the authentication has + * to happen. Used by both the authentication request event and + * authentication response command interface. + * @ssid: SSID of the AP. Used by both the authentication request event and + * authentication response command interface. + * @key_mgmt_suite: AKM suite of the respective authentication. Used by the + * authentication request event interface. + * @status: status code, %WLAN_STATUS_SUCCESS for successful authentication, + * use %WLAN_STATUS_UNSPECIFIED_FAILURE if user space cannot give you + * the real status code for failures. Used only for the authentication + * response command interface (user space to driver). + */ +struct cfg80211_external_auth_params { + enum nl80211_external_auth_action action; + u8 bssid[ETH_ALEN] __aligned(2); + struct cfg80211_ssid ssid; + unsigned int key_mgmt_suite; + u16 status; +}; + +/** * struct cfg80211_ops - backend description for wireless configuration * * This struct is registered by fullmac card drivers and/or wireless stacks @@ -2321,6 +2375,8 @@ * the driver, and will be valid until passed to cfg80211_scan_done(). * For scan results, call cfg80211_inform_bss(); you can call this outside * the scan/scan_done bracket too. + * @abort_scan: Tell the driver to abort an ongoing scan. The driver shall + * indicate the status of the scan through cfg80211_scan_done(). * * @auth: Request to authenticate with the specified peer * (invoked with the wireless_dev mutex held) @@ -2492,6 +2548,11 @@ * and returning to the base channel for communication with the AP. * @tdls_cancel_channel_switch: Stop channel-switching with a TDLS peer. Both * peers must be on the base channel when the call completes. + * + * @external_auth: indicates result of offloaded authentication processing from + * user space + * @set_fils_aad: Set FILS AAD data to driver so that driver can use those to + * encrypt/decrypt (Re)Association Request/Response frame. */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -2593,6 +2654,7 @@ int (*scan)(struct wiphy *wiphy, struct cfg80211_scan_request *request); + void (*abort_scan)(struct wiphy *wiphy, struct wireless_dev *wdev); int (*auth)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_auth_request *req); @@ -2756,6 +2818,11 @@ void (*tdls_cancel_channel_switch)(struct wiphy *wiphy, struct net_device *dev, const u8 *addr); + int (*external_auth)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_external_auth_params *params); + + int (*set_fils_aad)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_fils_aad *fils_aad); }; /* @@ -3486,6 +3553,10 @@ * registered for unexpected class 3 frames (AP mode) * @conn: (private) cfg80211 software SME connection state machine data * @connect_keys: (private) keys to set after connection is established + * @conn_bss_type: connecting/connected BSS type + * @conn_owner_nlportid: (private) connection owner socket port ID + * @disconnect_wk: (private) auto-disconnect work + * @disconnect_bssid: (private) the BSSID to use for auto-disconnect * @ibss_fixed: (private) IBSS is using fixed BSSID * @ibss_dfs_possible: (private) IBSS may change to a DFS channel * @event_list: (private) list for internal event processing @@ -3516,6 +3587,11 @@ u8 ssid_len, mesh_id_len, mesh_id_up_len; struct cfg80211_conn *conn; struct cfg80211_cached_keys *connect_keys; + enum ieee80211_bss_type conn_bss_type; + u32 conn_owner_nlportid; + + struct work_struct disconnect_wk; + u8 disconnect_bssid[ETH_ALEN]; struct list_head event_list; spinlock_t event_lock; @@ -5314,6 +5390,9 @@ { u8 *ft_byte; + if (ftidx >= NUM_NL80211_EXT_FEATURES) + return; + ft_byte = &wiphy->ext_features[ftidx / 8]; *ft_byte |= BIT(ftidx % 8); } @@ -5333,6 +5412,9 @@ { u8 ft_byte; + if (ftidx >= NUM_NL80211_EXT_FEATURES) + return false; + ft_byte = wiphy->ext_features[ftidx / 8]; return (ft_byte & BIT(ftidx % 8)) != 0; } @@ -5340,6 +5422,17 @@ /* ethtool helper */ void cfg80211_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info); +/** + * cfg80211_external_auth_request - userspace request for authentication + * @netdev: network device + * @params: External authentication parameters + * @gfp: allocation flags + * Returns: 0 on success, < 0 on error + */ +int cfg80211_external_auth_request(struct net_device *netdev, + struct cfg80211_external_auth_params *params, + gfp_t gfp); + /* Logging, debugging and troubleshooting/diagnostic helpers. */ /* wiphy_printk helpers, similar to dev_printk */