--- zzzz-none-000/linux-3.10.107/Documentation/devicetree/bindings/arm/atmel-at91.txt	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/Documentation/devicetree/bindings/arm/atmel-at91.txt	2021-02-04 17:41:59.000000000 +0000
@@ -1,6 +1,46 @@
 Atmel AT91 device tree bindings.
 ================================
 
+Boards with a SoC of the Atmel AT91 or SMART family shall have the following
+properties:
+
+Required root node properties:
+compatible: must be one of:
+ * "atmel,at91rm9200"
+
+ * "atmel,at91sam9" for SoCs using an ARM926EJ-S core, shall be extended with
+   the specific SoC family or compatible:
+    o "atmel,at91sam9260"
+    o "atmel,at91sam9261"
+    o "atmel,at91sam9263"
+    o "atmel,at91sam9x5" for the 5 series, shall be extended with the specific
+      SoC compatible:
+       - "atmel,at91sam9g15"
+       - "atmel,at91sam9g25"
+       - "atmel,at91sam9g35"
+       - "atmel,at91sam9x25"
+       - "atmel,at91sam9x35"
+    o "atmel,at91sam9g20"
+    o "atmel,at91sam9g45"
+    o "atmel,at91sam9n12"
+    o "atmel,at91sam9rl"
+    o "atmel,at91sam9xe"
+ * "atmel,sama5" for SoCs using a Cortex-A5, shall be extended with the specific
+   SoC family:
+    o "atmel,sama5d2" shall be extended with the specific SoC compatible:
+       - "atmel,sama5d27"
+    o "atmel,sama5d3" shall be extended with the specific SoC compatible:
+       - "atmel,sama5d31"
+       - "atmel,sama5d33"
+       - "atmel,sama5d34"
+       - "atmel,sama5d35"
+       - "atmel,sama5d36"
+    o "atmel,sama5d4" shall be extended with the specific SoC compatible:
+       - "atmel,sama5d41"
+       - "atmel,sama5d42"
+       - "atmel,sama5d43"
+       - "atmel,sama5d44"
+
 PIT Timer required properties:
 - compatible: Should be "atmel,at91sam9260-pit"
 - reg: Should contain registers location and length
@@ -8,10 +48,13 @@
   shared across all System Controller members.
 
 System Timer (ST) required properties:
-- compatible: Should be "atmel,at91rm9200-st"
+- compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd"
 - reg: Should contain registers location and length
 - interrupts: Should contain interrupt for the ST which is the IRQ line
   shared across all System Controller members.
+- clocks: phandle to input clock.
+Its subnodes can be:
+- watchdog: compatible should be "atmel,at91rm9200-wdt"
 
 TC/TCLIB Timer required properties:
 - compatible: Should be "atmel,<chip>-tcb".
@@ -20,6 +63,10 @@
 - interrupts: Should contain all interrupts for the TC block
   Note that you can specify several interrupt cells if the TC
   block has one interrupt per channel.
+- clock-names: tuple listing input clock names.
+	Required elements: "t0_clk", "slow_clk"
+	Optional elements: "t1_clk", "t2_clk"
+- clocks: phandles to input clocks.
 
 Examples:
 
@@ -28,6 +75,8 @@
 		compatible = "atmel,at91rm9200-tcb";
 		reg = <0xfff7c000 0x100>;
 		interrupts = <18 4>;
+		clocks = <&tcb0_clk>;
+		clock-names = "t0_clk";
 	};
 
 One interrupt per TC channel in a TC block:
@@ -35,25 +84,30 @@
 		compatible = "atmel,at91rm9200-tcb";
 		reg = <0xfffdc000 0x100>;
 		interrupts = <26 4 27 4 28 4>;
+		clocks = <&tcb1_clk>;
+		clock-names = "t0_clk";
 	};
 
 RSTC Reset Controller required properties:
 - compatible: Should be "atmel,<chip>-rstc".
-  <chip> can be "at91sam9260" or "at91sam9g45"
+  <chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3"
 - reg: Should contain registers location and length
+- clocks: phandle to input clock.
 
 Example:
 
 	rstc@fffffd00 {
 		compatible = "atmel,at91sam9260-rstc";
 		reg = <0xfffffd00 0x10>;
+		clocks = <&clk32k>;
 	};
 
 RAMC SDRAM/DDR Controller required properties:
-- compatible: Should be "atmel,at91sam9260-sdramc",
+- compatible: Should be "atmel,at91rm9200-sdramc", "syscon"
+			"atmel,at91sam9260-sdramc",
 			"atmel,at91sam9g45-ddramc",
+			"atmel,sama5d3-ddramc",
 - reg: Should contain registers location and length
-  For at91sam9263 and at91sam9g45 you must specify 2 entries.
 
 Examples:
 
@@ -62,18 +116,13 @@
 		reg = <0xffffe800 0x200>;
 	};
 
-	ramc0: ramc@ffffe400 {
-		compatible = "atmel,at91sam9g45-ddramc";
-		reg = <0xffffe400 0x200
-		       0xffffe600 0x200>;
-	};
-
 SHDWC Shutdown Controller
 
 required properties:
 - compatible: Should be "atmel,<chip>-shdwc".
   <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
 - reg: Should contain registers location and length
+- clocks: phandle to input clock.
 
 optional properties:
 - atmel,wakeup-mode: String, operation mode of the wakeup mode.
@@ -92,7 +141,24 @@
 
 Example:
 
-	rstc@fffffd00 {
-		compatible = "atmel,at91sam9260-rstc";
-		reg = <0xfffffd00 0x10>;
+	shdwc@fffffd10 {
+		compatible = "atmel,at91sam9260-shdwc";
+		reg = <0xfffffd10 0x10>;
+		clocks = <&clk32k>;
+	};
+
+Special Function Registers (SFR)
+
+Special Function Registers (SFR) manage specific aspects of the integrated
+memory, bridge implementations, processor and other functionality not controlled
+elsewhere.
+
+required properties:
+- compatible: Should be "atmel,<chip>-sfr", "syscon".
+  <chip> can be "sama5d3" or "sama5d4".
+- reg: Should contain registers location and length
+
+	sfr@f0038000 {
+		compatible = "atmel,sama5d3-sfr", "syscon";
+		reg = <0xf0038000 0x60>;
 	};