--- zzzz-none-000/linux-3.10.107/Documentation/devicetree/bindings/arm/fsl.txt	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/Documentation/devicetree/bindings/arm/fsl.txt	2021-02-04 17:41:59.000000000 +0000
@@ -74,3 +74,72 @@
 i.MX6q generic board
 Required root node properties:
     - compatible = "fsl,imx6q";
+
+Freescale Vybrid Platform Device Tree Bindings
+----------------------------------------------
+
+For the Vybrid SoC familiy all variants with DDR controller are supported,
+which is the VF5xx and VF6xx series. Out of historical reasons, in most
+places the kernel uses vf610 to refer to the whole familiy.
+The compatible string "fsl,vf610m4" is used for the secondary Cortex-M4
+core support.
+
+Required root node compatible property (one of them):
+    - compatible = "fsl,vf500";
+    - compatible = "fsl,vf510";
+    - compatible = "fsl,vf600";
+    - compatible = "fsl,vf610";
+    - compatible = "fsl,vf610m4";
+
+Freescale LS1021A Platform Device Tree Bindings
+------------------------------------------------
+
+Required root node compatible properties:
+  - compatible = "fsl,ls1021a";
+
+Freescale LS1021A SoC-specific Device Tree Bindings
+-------------------------------------------
+
+Freescale SCFG
+  SCFG is the supplemental configuration unit, that provides SoC specific
+configuration and status registers for the chip. Such as getting PEX port
+status.
+  Required properties:
+  - compatible: should be "fsl,ls1021a-scfg"
+  - reg: should contain base address and length of SCFG memory-mapped registers
+
+Example:
+	scfg: scfg@1570000 {
+		compatible = "fsl,ls1021a-scfg";
+		reg = <0x0 0x1570000 0x0 0x10000>;
+	};
+
+Freescale DCFG
+  DCFG is the device configuration unit, that provides general purpose
+configuration and status for the device. Such as setting the secondary
+core start address and release the secondary core from holdoff and startup.
+  Required properties:
+  - compatible: should be "fsl,ls1021a-dcfg"
+  - reg : should contain base address and length of DCFG memory-mapped registers
+
+Example:
+	dcfg: dcfg@1ee0000 {
+		compatible = "fsl,ls1021a-dcfg";
+		reg = <0x0 0x1ee0000 0x0 0x10000>;
+	};
+
+Freescale ARMv8 based Layerscape SoC family Device Tree Bindings
+----------------------------------------------------------------
+
+LS2080A ARMv8 based Simulator model
+Required root node properties:
+    - compatible = "fsl,ls2080a-simu", "fsl,ls2080a";
+
+LS2080A ARMv8 based QDS Board
+Required root node properties:
+    - compatible = "fsl,ls2080a-qds", "fsl,ls2080a";
+
+LS2080A ARMv8 based RDB Board
+Required root node properties:
+    - compatible = "fsl,ls2080a-rdb", "fsl,ls2080a";
+