--- zzzz-none-000/linux-3.10.107/Documentation/devicetree/bindings/clock/altr_socfpga.txt	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/Documentation/devicetree/bindings/clock/altr_socfpga.txt	2021-02-04 17:41:59.000000000 +0000
@@ -9,6 +9,9 @@
 	"altr,socfpga-pll-clock" - for a PLL clock
 	"altr,socfpga-perip-clock" - The peripheral clock divided from the
 		PLL clock.
+	"altr,socfpga-gate-clk" - Clocks that directly feed peripherals and
+		can get gated.
+
 - reg : shall be the control register offset from CLOCK_MANAGER's base for the clock.
 - clocks : shall be the input parent clock phandle for the clock. This is
 	either an oscillator or a pll output.
@@ -16,3 +19,12 @@
 
 Optional properties:
 - fixed-divider : If clocks have a fixed divider value, use this property.
+- clk-gate : For "socfpga-gate-clk", clk-gate contains the gating register
+        and the bit index.
+- div-reg : For "socfpga-gate-clk" and "socfpga-periph-clock", div-reg contains
+	the divider register, bit shift, and width.
+- clk-phase : For the sdmmc_clk, contains the value of the clock phase that controls
+	the SDMMC CIU clock. The first value is the clk_sample(smpsel), and the second
+	value is the cclk_in_drv(drvsel). The clk-phase is used to enable the correct
+	hold/delay times that is needed for the SD/MMC CIU clock. The values of both
+	can be 0-315 degrees, in 45 degree increments.