--- zzzz-none-000/linux-3.10.107/Documentation/devicetree/bindings/gpio/gpio-fan.txt	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/Documentation/devicetree/bindings/gpio/gpio-fan.txt	2021-02-04 17:41:59.000000000 +0000
@@ -2,15 +2,20 @@
 
 Required properties:
 - compatible : "gpio-fan"
+
+Optional properties:
 - gpios: Specifies the pins that map to bits in the control value,
   ordered MSB-->LSB.
 - gpio-fan,speed-map: A mapping of possible fan RPM speeds and the
   control value that should be set to achieve them. This array
   must have the RPM values in ascending order.
-
-Optional properties:
 - alarm-gpios: This pin going active indicates something is wrong with
   the fan, and a udev event will be fired.
+- cooling-cells: If used as a cooling device, must be <2>
+  Also see: Documentation/devicetree/bindings/thermal/thermal.txt
+  min and max states are derived from the speed-map of the fan.
+
+Note: At least one the "gpios" or "alarm-gpios" properties must be set.
 
 Examples:
 
@@ -23,3 +28,13 @@
 				      6000 2>;
 		alarm-gpios = <&gpio1 15 1>;
 	};
+	gpio_fan_cool: gpio_fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio2 14 1
+			 &gpio2 13 1>;
+		gpio-fan,speed-map =	<0    0>,
+					<3000 1>,
+					<6000 2>;
+		alarm-gpios = <&gpio2 15 1>;
+		#cooling-cells = <2>; /* min followed by max */
+	};