--- zzzz-none-000/linux-3.10.107/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt	2021-02-04 17:41:59.000000000 +0000
@@ -1,11 +1,11 @@
 NVIDIA Tegra20/Tegra30/Tegra114 I2C controller driver.
 
 Required properties:
-- compatible : should be:
-	"nvidia,tegra114-i2c"
-	"nvidia,tegra30-i2c"
-	"nvidia,tegra20-i2c"
-	"nvidia,tegra20-i2c-dvc"
+- compatible : For Tegra20, must be one of "nvidia,tegra20-i2c-dvc" or
+  "nvidia,tegra20-i2c".  For Tegra30, must be "nvidia,tegra30-i2c".
+  For Tegra114, must be "nvidia,tegra114-i2c".  Otherwise, must be
+  "nvidia,<chip>-i2c", plus at least one of the above, where <chip> is
+  tegra124, tegra132, or tegra210.
   Details of compatible are as follows:
   nvidia,tegra20-i2c-dvc: Tegra20 has specific I2C controller called as DVC I2C
 	controller. This only support master mode of I2C communication. Register
@@ -39,12 +39,23 @@
 - interrupts: Should contain I2C controller interrupts.
 - address-cells: Address cells for I2C device address.
 - size-cells: Size of the I2C device address.
-- clocks: Clock ID as per
-		Documentation/devicetree/bindings/clock/tegra<chip-id>.txt
-	for I2C controller.
-- clock-names: Name of the clock:
-	Tegra20/Tegra30 I2C controller: "div-clk and "fast-clk".
-	Tegra114 I2C controller: "div-clk".
+- clocks: Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  Tegra20/Tegra30:
+  - div-clk
+  - fast-clk
+  Tegra114:
+  - div-clk
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - i2c
+- dmas: Must contain an entry for each entry in clock-names.
+  See ../dma/dma.txt for details.
+- dma-names: Must include the following entries:
+  - rx
+  - tx
 
 Example:
 
@@ -56,5 +67,9 @@
 		#size-cells = <0>;
 		clocks = <&tegra_car 12>, <&tegra_car 124>;
 		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 12>;
+		reset-names = "i2c";
+		dmas = <&apbdma 16>, <&apbdma 16>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};