--- zzzz-none-000/linux-3.10.107/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt	2021-02-04 17:41:59.000000000 +0000
@@ -2,103 +2,17 @@
 
 Required properties:
 
-- compatible : should be "allwinner,sun4i-ic"
+- compatible : should be "allwinner,sun4i-a10-ic"
 - reg : Specifies base physical address and size of the registers.
 - interrupt-controller : Identifies the node as an interrupt controller
 - #interrupt-cells : Specifies the number of cells needed to encode an
   interrupt source. The value shall be 1.
 
-The interrupt sources are as follows:
-
-0: ENMI
-1: UART0
-2: UART1
-3: UART2
-4: UART3
-5: IR0
-6: IR1
-7: I2C0
-8: I2C1
-9: I2C2
-10: SPI0
-11: SPI1
-12: SPI2
-13: SPDIF
-14: AC97
-15: TS
-16: I2S
-17: UART4
-18: UART5
-19: UART6
-20: UART7
-21: KEYPAD
-22: TIMER0
-23: TIMER1
-24: TIMER2
-25: TIMER3
-26: CAN
-27: DMA
-28: PIO
-29: TOUCH_PANEL
-30: AUDIO_CODEC
-31: LRADC
-32: SDMC0
-33: SDMC1
-34: SDMC2
-35: SDMC3
-36: MEMSTICK
-37: NAND
-38: USB0
-39: USB1
-40: USB2
-41: SCR
-42: CSI0
-43: CSI1
-44: LCDCTRL0
-45: LCDCTRL1
-46: MP
-47: DEFEBE0
-48: DEFEBE1
-49: PMU
-50: SPI3
-51: TZASC
-52: PATA
-53: VE
-54: SS
-55: EMAC
-56: SATA
-57: GPS
-58: HDMI
-59: TVE
-60: ACE
-61: TVD
-62: PS2_0
-63: PS2_1
-64: USB3
-65: USB4
-66: PLE_PFM
-67: TIMER4
-68: TIMER5
-69: GPU_GP
-70: GPU_GPMMU
-71: GPU_PP0
-72: GPU_PPMMU0
-73: GPU_PMU
-74: GPU_RSV0
-75: GPU_RSV1
-76: GPU_RSV2
-77: GPU_RSV3
-78: GPU_RSV4
-79: GPU_RSV5
-80: GPU_RSV6
-82: SYNC_TIMER0
-83: SYNC_TIMER1
-
 Example:
 
 intc: interrupt-controller {
-	compatible = "allwinner,sun4i-ic";
+	compatible = "allwinner,sun4i-a10-ic";
 	reg = <0x01c20400 0x400>;
 	interrupt-controller;
-	#interrupt-cells = <2>;
+	#interrupt-cells = <1>;
 };