--- zzzz-none-000/linux-3.10.107/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt	2021-02-04 17:41:59.000000000 +0000
@@ -5,9 +5,14 @@
 controller, or the HW block containing it, is referred to occasionally
 as "armctrl" in the SoC documentation, hence naming of this binding.
 
+The BCM2836 contains the same interrupt controller with the same
+interrupts, but the per-CPU interrupt controller is the root, and an
+interrupt there indicates that the ARMCTRL has an interrupt to handle.
+
 Required properties:
 
-- compatible : should be "brcm,bcm2835-armctrl-ic"
+- compatible : should be "brcm,bcm2835-armctrl-ic" or
+                 "brcm,bcm2836-armctrl-ic"
 - reg : Specifies base physical address and size of the registers.
 - interrupt-controller : Identifies the node as an interrupt controller
 - #interrupt-cells : Specifies the number of cells needed to encode an
@@ -20,6 +25,12 @@
   The 2nd cell contains the interrupt number within the bank. Valid values
   are 0..7 for bank 0, and 0..31 for bank 1.
 
+Additional required properties for brcm,bcm2836-armctrl-ic:
+- interrupt-parent : Specifies the parent interrupt controller when this
+  controller is the second level.
+- interrupts : Specifies the interrupt on the parent for this interrupt
+  controller to handle.
+
 The interrupt sources are as follows:
 
 Bank 0:
@@ -102,9 +113,21 @@
 
 Example:
 
+/* BCM2835, first level */
 intc: interrupt-controller {
 	compatible = "brcm,bcm2835-armctrl-ic";
 	reg = <0x7e00b200 0x200>;
 	interrupt-controller;
 	#interrupt-cells = <2>;
 };
+
+/* BCM2836, second level */
+intc: interrupt-controller {
+	compatible = "brcm,bcm2836-armctrl-ic";
+	reg = <0x7e00b200 0x200>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+
+	interrupt-parent = <&local_intc>;
+	interrupts = <8>;
+};