--- zzzz-none-000/linux-3.10.107/Documentation/devicetree/bindings/media/video-interfaces.txt	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/Documentation/devicetree/bindings/media/video-interfaces.txt	2021-02-04 17:41:59.000000000 +0000
@@ -88,6 +88,8 @@
 - field-even-active: field signal level during the even field data transmission.
 - pclk-sample: sample data on rising (1) or falling (0) edge of the pixel clock
   signal.
+- sync-on-green-active: active state of Sync-on-green (SoG) signal, 0/1 for
+  LOW/HIGH respectively.
 - data-lanes: an array of physical data lane indexes. Position of an entry
   determines the logical lane number, while the value of an entry indicates
   physical lane, e.g. for 2-lane MIPI CSI-2 bus we could have
@@ -101,6 +103,15 @@
   array contains only one entry.
 - clock-noncontinuous: a boolean property to allow MIPI CSI-2 non-continuous
   clock mode.
+- link-frequencies: Allowed data bus frequencies. For MIPI CSI-2, for
+  instance, this is the actual frequency of the bus, not bits per clock per
+  lane value. An array of 64-bit unsigned integers.
+- lane-polarities: an array of polarities of the lanes starting from the clock
+  lane and followed by the data lanes in the same order as in data-lanes.
+  Valid values are 0 (normal) and 1 (inverted). The length of the array
+  should be the combined length of data-lanes and clock-lanes properties.
+  If the lane-polarities property is omitted, the value must be interpreted
+  as 0 (normal). This property is valid for serial busses only.
 
 
 Example
@@ -157,7 +168,7 @@
 	i2c0: i2c@0xfff20000 {
 		...
 		ov772x_1: camera@0x21 {
-			compatible = "omnivision,ov772x";
+			compatible = "ovti,ov772x";
 			reg = <0x21>;
 			vddio-supply = <&regulator1>;
 			vddcore-supply = <&regulator2>;