--- zzzz-none-000/linux-3.10.107/Documentation/devicetree/bindings/mfd/mc13xxx.txt	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/Documentation/devicetree/bindings/mfd/mc13xxx.txt	2021-02-04 17:41:59.000000000 +0000
@@ -10,9 +10,47 @@
 - fsl,mc13xxx-uses-touch : Indicate the touchscreen controller is being used
 
 Sub-nodes:
+- codec: Contain the Audio Codec node.
+  - adc-port: Contain PMIC SSI port number used for ADC.
+  - dac-port: Contain PMIC SSI port number used for DAC.
+- leds : Contain the led nodes and initial register values in property
+  "led-control". Number of register depends of used IC, for MC13783 is 6,
+  for MC13892 is 4, for MC34708 is 1. See datasheet for bits definitions of
+  these registers.
+  - #address-cells: Must be 1.
+  - #size-cells: Must be 0.
+  Each led node should contain "reg", which used as LED ID (described below).
+  Optional properties "label" and "linux,default-trigger" is described in
+  Documentation/devicetree/bindings/leds/common.txt.
 - regulators : Contain the regulator nodes. The regulators are bound using
   their names as listed below with their registers and bits for enabling.
 
+MC13783 LED IDs:
+    0  : Main display
+    1  : AUX display
+    2  : Keypad
+    3  : Red 1
+    4  : Green 1
+    5  : Blue 1
+    6  : Red 2
+    7  : Green 2
+    8  : Blue 2
+    9  : Red 3
+    10 : Green 3
+    11 : Blue 3
+
+MC13892 LED IDs:
+    0  : Main display
+    1  : AUX display
+    2  : Keypad
+    3  : Red
+    4  : Green
+    5  : Blue
+
+MC34708 LED IDs:
+    0  : Charger Red
+    1  : Charger Green
+
 MC13783 regulators:
     sw1a      : regulator SW1A      (register 24, bit 0)
     sw1b      : regulator SW1B      (register 25, bit 0)
@@ -89,6 +127,18 @@
 		interrupt-parent = <&gpio0>;
 		interrupts = <8>;
 
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			led-control = <0x000 0x000 0x0e0 0x000>;
+
+			sysled {
+				reg = <3>;
+				label = "system:red:live";
+				linux,default-trigger = "heartbeat";
+			};
+		};
+
 		regulators {
 			sw1_reg: mc13892__sw1 {
 				regulator-min-microvolt = <600000>;