--- zzzz-none-000/linux-3.10.107/Documentation/devicetree/bindings/mtd/gpmi-nand.txt	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/Documentation/devicetree/bindings/mtd/gpmi-nand.txt	2021-02-04 17:41:59.000000000 +0000
@@ -1,7 +1,7 @@
 * Freescale General-Purpose Media Interface (GPMI)
 
 The GPMI nand controller provides an interface to control the
-NAND flash chips. We support only one NAND chip now.
+NAND flash chips.
 
 Required properties:
   - compatible : should be "fsl,<chip>-gpmi-nand"
@@ -17,6 +17,24 @@
 Optional properties:
   - nand-on-flash-bbt: boolean to enable on flash bbt option if not
                        present false
+  - fsl,use-minimum-ecc: Protect this NAND flash with the minimum ECC
+                       strength required. The required ECC strength is
+                       automatically discoverable for some flash
+                       (e.g., according to the ONFI standard).
+                       However, note that if this strength is not
+                       discoverable or this property is not enabled,
+                       the software may chooses an implementation-defined
+                       ECC scheme.
+  - fsl,no-blockmark-swap: Don't swap the bad block marker from the OOB
+                       area with the byte in the data area but rely on the
+                       flash based BBT for identifying bad blocks.
+                       NOTE: this is only valid in conjunction with
+                             'nand-on-flash-bbt'.
+                       WARNING: on i.MX28 blockmark swapping cannot be
+                       disabled for the BootROM in the FCB. Thus,
+                       partitions written from Linux with this feature
+                       turned on may not be accessible by the BootROM
+                       code.
 
 The device tree may optionally contain sub-nodes describing partitions of the
 address space. See partition.txt for more detail.