--- zzzz-none-000/linux-3.10.107/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt	2021-02-04 17:41:59.000000000 +0000
@@ -1,15 +1,18 @@
 * Marvell Armada 370 / Armada XP Ethernet Controller (NETA)
 
 Required properties:
-- compatible: should be "marvell,armada-370-neta".
+- compatible: "marvell,armada-370-neta" or "marvell,armada-xp-neta".
 - reg: address and length of the register set for the device.
 - interrupts: interrupt for the device
-- phy: A phandle to a phy node defining the PHY address (as the reg
-  property, a single integer).
-- phy-mode: The interface between the SoC and the PHY (a string that
-  of_get_phy_mode() can understand)
+- phy: See ethernet.txt file in the same directory.
+- phy-mode: See ethernet.txt file in the same directory
 - clocks: a pointer to the reference clock for this device.
 
+Optional properties:
+- tx-csum-limit: maximum mtu supported by port that allow TX checksum.
+  Value is presented in bytes. If not used, by default 1600B is set for
+  "marvell,armada-370-neta" and 9800B for others.
+
 Example:
 
 ethernet@d0070000 {
@@ -17,6 +20,7 @@
 	reg = <0xd0070000 0x2500>;
 	interrupts = <8>;
 	clocks = <&gate_clk 4>;
+	tx-csum-limit = <9800>
 	status = "okay";
 	phy = <&phy0>;
 	phy-mode = "rgmii-id";