--- zzzz-none-000/linux-3.10.107/Documentation/devicetree/bindings/regulator/tps65090.txt	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/Documentation/devicetree/bindings/regulator/tps65090.txt	2021-02-04 17:41:59.000000000 +0000
@@ -21,6 +21,10 @@
   number should be provided. If it is externally controlled and no GPIO
   entry then driver will just configure this rails as external control
   and will not provide any enable/disable APIs.
+- ti,overcurrent-wait: This is applicable to FET registers, which have a
+  poorly defined "overcurrent wait" field.  If this property is present it
+  should be between 0 - 3.  If this property isn't present we won't touch the
+  "overcurrent wait" field and we'll leave it to the BIOS/EC to deal with.
 
 Each regulator is defined using the standard binding for regulators.
 
@@ -41,8 +45,8 @@
 		infet5-supply = <&some_reg>;
 		infet6-supply = <&some_reg>;
 		infet7-supply = <&some_reg>;
-		vsys_l1-supply = <&some_reg>;
-		vsys_l2-supply = <&some_reg>;
+		vsys-l1-supply = <&some_reg>;
+		vsys-l2-supply = <&some_reg>;
 
 		regulators {
 			dcdc1 {