--- zzzz-none-000/linux-3.10.107/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt	2021-02-04 17:41:59.000000000 +0000
@@ -4,8 +4,17 @@
 - compatible : should be "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart".
 - reg: Should contain UART controller registers location and length.
 - interrupts: Should contain UART controller interrupts.
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
-  request selector for this UART controller.
+- clocks: Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - serial
+- dmas : Must contain an entry for each entry in clock-names.
+  See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+  - rx
+  - tx
 
 Optional properties:
 - nvidia,enable-modem-interrupt: Enable modem interrupts. Should be enable
@@ -18,7 +27,11 @@
 	reg = <0x70006000 0x40>;
 	reg-shift = <2>;
 	interrupts = <0 36 0x04>;
-	nvidia,dma-request-selector = <&apbdma 8>;
 	nvidia,enable-modem-interrupt;
+	clocks = <&tegra_car 6>;
+	resets = <&tegra_car 6>;
+	reset-names = "serial";
+	dmas = <&apbdma 8>, <&apbdma 8>;
+	dma-names = "rx", "tx";
 	status = "disabled";
 };