--- zzzz-none-000/linux-3.10.107/Documentation/devicetree/bindings/sound/tlv320aic3x.txt	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/Documentation/devicetree/bindings/sound/tlv320aic3x.txt	2021-02-04 17:41:59.000000000 +0000
@@ -3,7 +3,15 @@
 The tlv320aic3x serial control bus communicates through I2C protocols
 
 Required properties:
-- compatible - "string" -  "ti,tlv320aic3x"
+
+- compatible - "string" - One of:
+    "ti,tlv320aic3x" - Generic TLV320AIC3x device
+    "ti,tlv320aic33" - TLV320AIC33
+    "ti,tlv320aic3007" - TLV320AIC3007
+    "ti,tlv320aic3106" - TLV320AIC3106
+    "ti,tlv320aic3104" - TLV320AIC3104
+
+
 - reg - <int> -  I2C slave address
 
 
@@ -11,16 +19,49 @@
 
 - gpio-reset - gpio pin number used for codec reset
 - ai3x-gpio-func - <array of 2 int> - AIC3X_GPIO1 & AIC3X_GPIO2 Functionality
+				    - Not supported on tlv320aic3104
 - ai3x-micbias-vg - MicBias Voltage required.
 	1 - MICBIAS output is powered to 2.0V,
 	2 - MICBIAS output is powered to 2.5V,
 	3 - MICBIAS output is connected to AVDD,
 	If this node is not mentioned or if the value is incorrect, then MicBias
 	is powered down.
+- AVDD-supply, IOVDD-supply, DRVDD-supply, DVDD-supply : power supplies for the
+  device as covered in Documentation/devicetree/bindings/regulator/regulator.txt
+
+CODEC output pins:
+  * LLOUT
+  * RLOUT
+  * MONO_LOUT
+  * HPLOUT
+  * HPROUT
+  * HPLCOM
+  * HPRCOM
+
+CODEC input pins for TLV320AIC3104:
+  * MIC2L
+  * MIC2R
+  * LINE1L
+  * LINE1R
+
+CODEC input pins for other compatible codecs:
+  * MIC3L
+  * MIC3R
+  * LINE1L
+  * LINE2L
+  * LINE1R
+  * LINE2R
+
+The pins can be used in referring sound node's audio-routing property.
 
 Example:
 
 tlv320aic3x: tlv320aic3x@1b {
 	compatible = "ti,tlv320aic3x";
 	reg = <0x1b>;
+
+	AVDD-supply = <&regulator>;
+	IOVDD-supply = <&regulator>;
+	DRVDD-supply = <&regulator>;
+	DVDD-supply = <&regulator>;
 };