--- zzzz-none-000/linux-3.10.107/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt	2021-02-04 17:41:59.000000000 +0000
@@ -6,27 +6,18 @@
 and additions :
 
 Required properties :
- - compatible : Should be "nvidia,tegra20-ehci" for USB controllers
-   used in host mode.
- - phy_type : Should be one of "ulpi" or "utmi".
- - nvidia,vbus-gpio : If present, specifies a gpio that needs to be
-   activated for the bus to be powered.
- - nvidia,phy : phandle of the PHY instance, the controller is connected to.
-
-Required properties for phy_type == ulpi:
-  - nvidia,phy-reset-gpio : The GPIO used to reset the PHY.
+ - compatible : For Tegra20, must contain "nvidia,tegra20-ehci".
+   For Tegra30, must contain "nvidia,tegra30-ehci".  Otherwise, must contain
+   "nvidia,<chip>-ehci" plus at least one of the above, where <chip> is
+   tegra114, tegra124, tegra132, or tegra210.
+ - nvidia,phy : phandle of the PHY that the controller is connected to.
+ - clocks : Must contain one entry, for the module clock.
+   See ../clocks/clock-bindings.txt for details.
+ - resets : Must contain an entry for each entry in reset-names.
+   See ../reset/reset.txt for details.
+ - reset-names : Must include the following entries:
+   - usb
 
 Optional properties:
-  - dr_mode : dual role mode. Indicates the working mode for
-   nvidia,tegra20-ehci compatible controllers.  Can be "host", "peripheral",
-   or "otg".  Default to "host" if not defined for backward compatibility.
-      host means this is a host controller
-      peripheral means it is device controller
-      otg means it can operate as either ("on the go")
-  - nvidia,has-legacy-mode : boolean indicates whether this controller can
-    operate in legacy mode (as APX 2500 / 2600). In legacy mode some
-    registers are accessed through the APB_MISC base address instead of
-    the USB controller. Since this is a legacy issue it probably does not
-    warrant a compatible string of its own.
-  - nvidia,needs-double-reset : boolean is to be set for some of the Tegra2
-    USB ports, which need reset twice due to hardware issues.
+ - nvidia,needs-double-reset : boolean is to be set for some of the Tegra20
+   USB ports, which need reset twice due to hardware issues.