--- zzzz-none-000/linux-3.10.107/Documentation/hwmon/lm95245 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/Documentation/hwmon/lm95245 2021-02-04 17:41:59.000000000 +0000 @@ -2,10 +2,14 @@ ================== Supported chips: - * National Semiconductor LM95245 + * TI LM95235 + Addresses scanned: I2C 0x18, 0x29, 0x4c + Datasheet: Publicly available at the TI website + http://www.ti.com/lit/ds/symlink/lm95235.pdf + * TI / National Semiconductor LM95245 Addresses scanned: I2C 0x18, 0x19, 0x29, 0x4c, 0x4d - Datasheet: Publicly available at the National Semiconductor website - http://www.national.com/mpf/LM/LM95245.html + Datasheet: Publicly available at the TI website + http://www.ti.com/lit/ds/symlink/lm95245.pdf Author: Alexander Stein @@ -13,10 +17,10 @@ Description ----------- -The LM95245 is an 11-bit digital temperature sensor with a 2-wire System +LM95235 and LM95245 are 11-bit digital temperature sensors with a 2-wire System Management Bus (SMBus) interface and TruTherm technology that can monitor the temperature of a remote diode as well as its own temperature. -The LM95245 can be used to very accurately monitor the temperature of +The chips can be used to very accurately monitor the temperature of external devices such as microprocessors. All temperature values are given in millidegrees Celsius. Local temperature @@ -24,8 +28,12 @@ given within a range of -127 to +255 degrees. Resolution depends on temperature input and range. -Each sensor has its own critical limit, but the hysteresis is common to all -two channels. +Each sensor has its own critical limit. Additionally, there is a relative +hysteresis value common to both critical limits. To make life easier to +user-space applications, two absolute values are exported, one for each +channel, but these values are of course linked. Only the local hysteresis +can be set from user-space, and the same delta applies to the remote +hysteresis. The lm95245 driver can change its update interval to a fixed set of values. It will round up to the next selectable interval. See the datasheet for exact