--- zzzz-none-000/linux-3.10.107/Makefile 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/Makefile 2021-02-04 17:41:59.000000000 +0000 @@ -1,8 +1,8 @@ -VERSION = 3 -PATCHLEVEL = 10 -SUBLEVEL = 107 +VERSION = 4 +PATCHLEVEL = 4 +SUBLEVEL = 60 EXTRAVERSION = -NAME = TOSSUG Baby Fish +NAME = Blurry Fish Butt # *DOCUMENTATION* # To see a list of typical targets execute "make help" @@ -10,11 +10,10 @@ # Comments in this file are targeted only to the developer, do not # expect to learn how to build the kernel reading this file. -# Do not: -# o use make's built-in rules and variables -# (this increases performance and avoids hard-to-debug behaviour); -# o print "Entering directory ..."; -MAKEFLAGS += -rR --no-print-directory +# o Do not use make's built-in rules and variables +# (this increases performance and avoids hard-to-debug behaviour); +# o Look for make include files relative to root of kernel src +MAKEFLAGS += -rR --include-dir=$(CURDIR) # Avoid funny character set dependencies unexport LC_ALL @@ -22,6 +21,9 @@ LC_NUMERIC=C export LC_COLLATE LC_NUMERIC +# Avoid interference with shell env settings +unexport GREP_OPTIONS + # We are using a recursive build, so we need to do a little thinking # to get the ordering right. # @@ -38,6 +40,29 @@ # descending is started. They are now explicitly listed as the # prepare rule. +# Beautify output +# --------------------------------------------------------------------------- +# +# Normally, we echo the whole command before executing it. By making +# that echo $($(quiet)$(cmd)), we now have the possibility to set +# $(quiet) to choose other forms of output instead, e.g. +# +# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ +# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< +# +# If $(quiet) is empty, the whole command will be printed. +# If it is set to "quiet_", only the short version will be printed. +# If it is set to "silent_", nothing will be printed at all, since +# the variable $(silent_cmd_cc_o_c) doesn't exist. +# +# A simple variant is to prefix commands with $(Q) - that's useful +# for commands that shall be hidden in non-verbose mode. +# +# $(Q)ln $@ :< +# +# If KBUILD_VERBOSE equals 0 then the above command will be hidden. +# If KBUILD_VERBOSE equals 1 then the above command is displayed. +# # To put more focus on warnings, be less verbose as default # Use 'make V=1' to see the full commands @@ -48,33 +73,28 @@ KBUILD_VERBOSE = 0 endif -# Call a source code checker (by default, "sparse") as part of the -# C compilation. -# -# Use 'make C=1' to enable checking of only re-compiled files. -# Use 'make C=2' to enable checking of *all* source files, regardless -# of whether they are re-compiled or not. -# -# See the file "Documentation/sparse.txt" for more details, including -# where to get the "sparse" utility. +ifeq ($(KBUILD_VERBOSE),1) + quiet = + Q = +else + quiet=quiet_ + Q = @ +endif -ifeq ("$(origin C)", "command line") - KBUILD_CHECKSRC = $(C) +# If the user is running make -s (silent mode), suppress echoing of +# commands + +ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4 +ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),) + quiet=silent_ endif -ifndef KBUILD_CHECKSRC - KBUILD_CHECKSRC = 0 +else # make-3.8x +ifneq ($(filter s% -s%,$(MAKEFLAGS)),) + quiet=silent_ endif - -# Use make M=dir to specify directory of external module to build -# Old syntax make ... SUBDIRS=$PWD is still supported -# Setting the environment variable KBUILD_EXTMOD take precedence -ifdef SUBDIRS - KBUILD_EXTMOD ?= $(SUBDIRS) endif -ifeq ("$(origin M)", "command line") - KBUILD_EXTMOD := $(M) -endif +export quiet Q KBUILD_VERBOSE # kbuild supports saving output files in a separate directory. # To locate output files in a separate directory two syntaxes are supported. @@ -91,7 +111,6 @@ # The O= assignment takes precedence over the KBUILD_OUTPUT environment # variable. - # KBUILD_SRC is set on invocation of make in OBJ directory # KBUILD_SRC is not intended to be used by the regular user (for now) ifeq ($(KBUILD_SRC),) @@ -102,10 +121,6 @@ KBUILD_OUTPUT := $(O) endif -ifeq ("$(origin W)", "command line") - export KBUILD_ENABLE_EXTRA_GCC_CHECKS := $(W) -endif - # That's our default target when none is given on the command line PHONY := _all _all: @@ -113,13 +128,18 @@ # Cancel implicit rules on top Makefile $(CURDIR)/Makefile Makefile: ; +ifneq ($(words $(subst :, ,$(CURDIR))), 1) + $(error main directory cannot contain spaces nor colons) +endif + ifneq ($(KBUILD_OUTPUT),) # Invoke a second make in the output directory, passing relevant variables # check that the output directory actually exists saved-output := $(KBUILD_OUTPUT) -KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd) +KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \ + && /bin/pwd) $(if $(KBUILD_OUTPUT),, \ - $(error output directory "$(saved-output)" does not exist)) + $(error failed to create output directory "$(saved-output)")) PHONY += $(MAKECMDGOALS) sub-make @@ -127,10 +147,8 @@ @: sub-make: FORCE - $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \ - KBUILD_SRC=$(CURDIR) \ - KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \ - $(filter-out _all sub-make,$(MAKECMDGOALS)) + $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \ + -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS)) # Leave processing to above invocation of make skip-makefile := 1 @@ -140,6 +158,39 @@ # We process the rest of the Makefile if this is the final invocation of make ifeq ($(skip-makefile),) +# Do not print "Entering directory ...", +# but we want to display it when entering to the output directory +# so that IDEs/editors are able to understand relative filenames. +MAKEFLAGS += --no-print-directory + +# Call a source code checker (by default, "sparse") as part of the +# C compilation. +# +# Use 'make C=1' to enable checking of only re-compiled files. +# Use 'make C=2' to enable checking of *all* source files, regardless +# of whether they are re-compiled or not. +# +# See the file "Documentation/sparse.txt" for more details, including +# where to get the "sparse" utility. + +ifeq ("$(origin C)", "command line") + KBUILD_CHECKSRC = $(C) +endif +ifndef KBUILD_CHECKSRC + KBUILD_CHECKSRC = 0 +endif + +# Use make M=dir to specify directory of external module to build +# Old syntax make ... SUBDIRS=$PWD is still supported +# Setting the environment variable KBUILD_EXTMOD take precedence +ifdef SUBDIRS + KBUILD_EXTMOD ?= $(SUBDIRS) +endif + +ifeq ("$(origin M)", "command line") + KBUILD_EXTMOD := $(M) +endif + # If building an external module we do not care about the all: rule # but instead _all depend on modules PHONY += all @@ -149,8 +200,18 @@ _all: modules endif -srctree := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR)) -objtree := $(CURDIR) +ifeq ($(KBUILD_SRC),) + # building in the source tree + srctree := . +else + ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR))) + # building in a subdirectory of the source tree + srctree := .. + else + srctree := $(KBUILD_SRC) + endif +endif +objtree := . src := $(srctree) obj := $(objtree) @@ -158,11 +219,10 @@ export srctree objtree VPATH - # SUBARCH tells the usermode build what the underlying arch is. That is set # first, and if a usermode build is happening, the "ARCH=um" on the command # line overrides the setting of ARCH below. If a native build is happening, -# then ARCH is assigned, getting whatever value it gets normally, and +# then ARCH is assigned, getting whatever value it gets normally, and # SUBARCH is subsequently ignored. SUBARCH := $(shell uname -m | sed -e s/i.86/x86/ -e s/x86_64/x86/ \ @@ -244,24 +304,29 @@ HOSTCFLAGS = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -std=gnu89 HOSTCXXFLAGS = -O2 +ifeq ($(shell $(HOSTCC) -v 2>&1 | grep -c "clang version"), 1) +HOSTCFLAGS += -Wno-unused-value -Wno-unused-parameter \ + -Wno-missing-field-initializers -fno-delete-null-pointer-checks +endif + # Decide whether to build built-in, modular, or both. # Normally, just do built-in. KBUILD_MODULES := KBUILD_BUILTIN := 1 -# If we have only "make modules", don't compile built-in objects. -# When we're building modules with modversions, we need to consider -# the built-in objects during the descend as well, in order to -# make sure the checksums are up to date before we record them. +# If we have only "make modules", don't compile built-in objects. +# When we're building modules with modversions, we need to consider +# the built-in objects during the descend as well, in order to +# make sure the checksums are up to date before we record them. ifeq ($(MAKECMDGOALS),modules) KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1) endif -# If we have "make modules", compile modules -# in addition to whatever we do anyway. -# Just "make" or "make all" shall build modules as well +# If we have "make modules", compile modules +# in addition to whatever we do anyway. +# Just "make" or "make all" shall build modules as well ifneq ($(filter all _all modules,$(MAKECMDGOALS)),) KBUILD_MODULES := 1 @@ -274,56 +339,11 @@ export KBUILD_MODULES KBUILD_BUILTIN export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD -# Beautify output -# --------------------------------------------------------------------------- -# -# Normally, we echo the whole command before executing it. By making -# that echo $($(quiet)$(cmd)), we now have the possibility to set -# $(quiet) to choose other forms of output instead, e.g. -# -# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ -# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< -# -# If $(quiet) is empty, the whole command will be printed. -# If it is set to "quiet_", only the short version will be printed. -# If it is set to "silent_", nothing will be printed at all, since -# the variable $(silent_cmd_cc_o_c) doesn't exist. -# -# A simple variant is to prefix commands with $(Q) - that's useful -# for commands that shall be hidden in non-verbose mode. -# -# $(Q)ln $@ :< -# -# If KBUILD_VERBOSE equals 0 then the above command will be hidden. -# If KBUILD_VERBOSE equals 1 then the above command is displayed. - -ifeq ($(KBUILD_VERBOSE),1) - quiet = - Q = -else - quiet=quiet_ - Q = @ -endif - -# If the user is running make -s (silent mode), suppress echoing of -# commands - -ifneq ($(filter s% -s%,$(MAKEFLAGS)),) - quiet=silent_ -endif - -export quiet Q KBUILD_VERBOSE - - -# Look for make include files relative to root of kernel src -MAKEFLAGS += --include-dir=$(srctree) - # We need some generic definitions (do not try to remake the file). -$(srctree)/scripts/Kbuild.include: ; -include $(srctree)/scripts/Kbuild.include +scripts/Kbuild.include: ; +include scripts/Kbuild.include # Make variables (CC, etc...) - AS = $(CROSS_COMPILE)as LD = $(CROSS_COMPILE)ld CC = $(CROSS_COMPILE)gcc @@ -338,6 +358,7 @@ INSTALLKERNEL := installkernel DEPMOD = /sbin/depmod PERL = perl +PYTHON = python CHECK = sparse CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \ @@ -347,7 +368,7 @@ LDFLAGS_MODULE = CFLAGS_KERNEL = AFLAGS_KERNEL = -CFLAGS_GCOV = -fprofile-arcs -ftest-coverage +CFLAGS_GCOV = -fprofile-arcs -ftest-coverage -fno-tree-loop-im # Use USERINCLUDE when you must reference the UAPI directories only. @@ -356,15 +377,18 @@ -Iarch/$(hdr-arch)/include/generated/uapi \ -I$(srctree)/include/uapi \ -Iinclude/generated/uapi \ - -include $(srctree)/include/linux/kconfig.h + $(USERINCLUDE_AVM_SUBPROJECTS) \ + -include $(srctree)/include/linux/kconfig.h # Use LINUXINCLUDE when you must reference the include/ directory. # Needed to be compatible with the O= option LINUXINCLUDE := \ -I$(srctree)/arch/$(hdr-arch)/include \ + -Iarch/$(hdr-arch)/include/generated/uapi \ -Iarch/$(hdr-arch)/include/generated \ $(if $(KBUILD_SRC), -I$(srctree)/include) \ -Iinclude \ + $(LINUXINCLUDE_AVM_SUBPROJECTS) \ $(USERINCLUDE) KBUILD_CPPFLAGS := -D__KERNEL__ @@ -373,15 +397,17 @@ -fno-strict-aliasing -fno-common \ -Werror-implicit-function-declaration \ -Wno-format-security \ - -fno-delete-null-pointer-checks \ - -std=gnu89 + -Wno-unused-parameter \ + -Wno-sign-compare\ + -std=gnu89 $(call cc-option,-fno-PIE) + KBUILD_AFLAGS_KERNEL := KBUILD_CFLAGS_KERNEL := -KBUILD_AFLAGS := -D__ASSEMBLY__ +KBUILD_AFLAGS := -D__ASSEMBLY__ $(call cc-option,-fno-PIE) KBUILD_AFLAGS_MODULE := -DMODULE KBUILD_CFLAGS_MODULE := -DMODULE -KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds +KBUILD_LDFLAGS_MODULE = -T $(srctree)/scripts/module-common.lds # Read KERNELRELEASE from include/config/kernel.release (if it exists) KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null) @@ -390,11 +416,11 @@ export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC export CPP AR NM STRIP OBJCOPY OBJDUMP -export MAKE AWK GENKSYMS INSTALLKERNEL PERL UTS_MACHINE +export MAKE AWK GENKSYMS INSTALLKERNEL PERL PYTHON UTS_MACHINE export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS -export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV +export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV CFLAGS_KASAN export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL @@ -407,8 +433,9 @@ # Files to ignore in find ... statements -RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS \ - -o -name .pc -o -name .hg -o -name .git \) -prune -o +export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \ + -name CVS -o -name .pc -o -name .hg -o -name .git \) \ + -prune -o export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \ --exclude CVS --exclude .pc --exclude .hg --exclude .git @@ -452,9 +479,10 @@ # of make so .config is not included in this case either (for *config). version_h := include/generated/uapi/linux/version.h +old_version_h := include/linux/version.h no-dot-config-targets := clean mrproper distclean \ - cscope gtags TAGS tags help %docs check% coccicheck \ + cscope gtags TAGS tags help% %docs check% coccicheck \ $(version_h) headers_% archheaders archscripts \ kernelversion %src-pkg @@ -471,19 +499,33 @@ ifeq ($(KBUILD_EXTMOD),) ifneq ($(filter config %config,$(MAKECMDGOALS)),) config-targets := 1 - ifneq ($(filter-out config %config,$(MAKECMDGOALS)),) + ifneq ($(words $(MAKECMDGOALS)),1) mixed-targets := 1 endif endif endif +# install and module_install need also be processed one by one +ifneq ($(filter install,$(MAKECMDGOALS)),) + ifneq ($(filter modules_install,$(MAKECMDGOALS)),) + mixed-targets := 1 + endif +endif ifeq ($(mixed-targets),1) # =========================================================================== # We're called with mixed targets (*config and build targets). # Handle them one by one. -%:: FORCE - $(Q)$(MAKE) -C $(srctree) KBUILD_SRC= $@ +PHONY += $(MAKECMDGOALS) __build_one_by_one + +$(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one + @: + +__build_one_by_one: + $(Q)set -e; \ + for i in $(MAKECMDGOALS); do \ + $(MAKE) -f $(srctree)/Makefile $$i; \ + done else ifeq ($(config-targets),1) @@ -494,15 +536,13 @@ # Read arch specific Makefile to set KBUILD_DEFCONFIG as needed. # KBUILD_DEFCONFIG may point out an alternative default configuration # used for 'make defconfig' -include $(srctree)/arch/$(SRCARCH)/Makefile +include arch/$(SRCARCH)/Makefile export KBUILD_DEFCONFIG KBUILD_KCONFIG config: scripts_basic outputmakefile FORCE - $(Q)mkdir -p include/linux include/config $(Q)$(MAKE) $(build)=scripts/kconfig $@ %config: scripts_basic outputmakefile FORCE - $(Q)mkdir -p include/linux include/config $(Q)$(MAKE) $(build)=scripts/kconfig $@ else @@ -525,6 +565,7 @@ net-y := net/ libs-y := lib/ core-y := usr/ +virt-y := virt/ endif # KBUILD_EXTMOD ifeq ($(dot-config),1) @@ -572,13 +613,29 @@ # Defaults to vmlinux, but the arch makefile usually adds further targets all: vmlinux +# The arch Makefile can set ARCH_{CPP,A,C}FLAGS to override the default +# values of the respective KBUILD_* variables +ARCH_CPPFLAGS := +ARCH_AFLAGS := +ARCH_CFLAGS := +include arch/$(SRCARCH)/Makefile + +KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks,) +KBUILD_CFLAGS += $(call cc-disable-warning,maybe-uninitialized,) +KBUILD_CFLAGS += $(call cc-disable-warning,frame-address,) + ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE -KBUILD_CFLAGS += -Os $(call cc-disable-warning,maybe-uninitialized,) +KBUILD_CFLAGS += -Os $(EXTRA_OPTIMIZATION) else +ifdef CONFIG_PROFILE_ALL_BRANCHES KBUILD_CFLAGS += -O2 +else +KBUILD_CFLAGS += -O2 -fno-reorder-blocks -fno-tree-ch $(EXTRA_OPTIMIZATION) +endif endif -include $(srctree)/arch/$(SRCARCH)/Makefile +# Tell gcc to never replace conditional load with a non-conditional one +KBUILD_CFLAGS += $(call cc-option,--param=allow-store-data-races=0) ifdef CONFIG_READABLE_ASM # Disable optimizations that make assembler listings hard to read. @@ -594,14 +651,63 @@ KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN}) endif -# Force gcc to behave correct even for buggy distributions -ifndef CONFIG_CC_STACKPROTECTOR -KBUILD_CFLAGS += $(call cc-option, -fno-stack-protector) +# Handle stack protector mode. +# +# Since kbuild can potentially perform two passes (first with the old +# .config values and then with updated .config values), we cannot error out +# if a desired compiler option is unsupported. If we were to error, kbuild +# could never get to the second pass and actually notice that we changed +# the option to something that was supported. +# +# Additionally, we don't want to fallback and/or silently change which compiler +# flags will be used, since that leads to producing kernels with different +# security feature characteristics depending on the compiler used. ("But I +# selected CC_STACKPROTECTOR_STRONG! Why did it build with _REGULAR?!") +# +# The middle ground is to warn here so that the failed option is obvious, but +# to let the build fail with bad compiler flags so that we can't produce a +# kernel when there is a CONFIG and compiler mismatch. +# +ifdef CONFIG_CC_STACKPROTECTOR_REGULAR + stackp-flag := -fstack-protector + ifeq ($(call cc-option, $(stackp-flag)),) + $(warning Cannot use CONFIG_CC_STACKPROTECTOR_REGULAR: \ + -fstack-protector not supported by compiler) + endif +else +ifdef CONFIG_CC_STACKPROTECTOR_STRONG + stackp-flag := -fstack-protector-strong + ifeq ($(call cc-option, $(stackp-flag)),) + $(warning Cannot use CONFIG_CC_STACKPROTECTOR_STRONG: \ + -fstack-protector-strong not supported by compiler) + endif +else + # Force off for distro compilers that enable stack protector by default. + stackp-flag := $(call cc-option, -fno-stack-protector) +endif endif +KBUILD_CFLAGS += $(stackp-flag) -# This warning generated too much noise in a regular build. -# Use make W=1 to enable this warning (see scripts/Makefile.build) +ifeq ($(cc-name),clang) +KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,) +KBUILD_CPPFLAGS += $(call cc-option,-Wno-unknown-warning-option,) +KBUILD_CFLAGS += $(call cc-disable-warning, unused-variable) +KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier) +KBUILD_CFLAGS += $(call cc-disable-warning, gnu) +# Quiet clang warning: comparison of unsigned expression < 0 is always false +KBUILD_CFLAGS += $(call cc-disable-warning, tautological-compare) +# CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the +# source of a reference will be _MergedGlobals and not on of the whitelisted names. +# See modpost pattern 2 +KBUILD_CFLAGS += $(call cc-option, -mno-global-merge,) +KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior) +else + +# These warnings generated too much noise in a regular build. +# Use make W=1 to enable them (see scripts/Makefile.build) KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable) +KBUILD_CFLAGS += $(call cc-disable-warning, unused-const-variable) +endif ifdef CONFIG_FRAME_POINTER KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls @@ -619,8 +725,15 @@ KBUILD_CFLAGS += $(call cc-option, -fno-var-tracking-assignments) ifdef CONFIG_DEBUG_INFO +ifdef CONFIG_DEBUG_INFO_SPLIT +KBUILD_CFLAGS += $(call cc-option, -gsplit-dwarf, -g) +else KBUILD_CFLAGS += -g -KBUILD_AFLAGS += -gdwarf-2 +endif +KBUILD_AFLAGS += -Wa,-gdwarf-2 +endif +ifdef CONFIG_DEBUG_INFO_DWARF4 +KBUILD_CFLAGS += $(call cc-option, -gdwarf-4,) endif ifdef CONFIG_DEBUG_INFO_REDUCED @@ -629,10 +742,14 @@ endif ifdef CONFIG_FUNCTION_TRACER +ifndef CC_FLAGS_FTRACE +CC_FLAGS_FTRACE := -pg +endif +export CC_FLAGS_FTRACE ifdef CONFIG_HAVE_FENTRY CC_USING_FENTRY := $(call cc-option, -mfentry -DCC_USING_FENTRY) endif -KBUILD_CFLAGS += -pg $(CC_USING_FENTRY) +KBUILD_CFLAGS += $(CC_FLAGS_FTRACE) $(CC_USING_FENTRY) KBUILD_AFLAGS += $(CC_USING_FENTRY) ifdef CONFIG_DYNAMIC_FTRACE ifdef CONFIG_HAVE_C_RECORDMCOUNT @@ -663,18 +780,32 @@ # conserve stack if available KBUILD_CFLAGS += $(call cc-option,-fconserve-stack) +# disallow errors like 'EXPORT_GPL(foo);' with missing header +KBUILD_CFLAGS += $(call cc-option,-Werror=implicit-int) + +# require functions to have arguments in prototypes, not empty 'int foo()' +KBUILD_CFLAGS += $(call cc-option,-Werror=strict-prototypes) + +# Prohibit date/time macros, which would make the build non-deterministic +KBUILD_CFLAGS += $(call cc-option,-Werror=date-time) + # use the deterministic mode of AR if available KBUILD_ARFLAGS := $(call ar-option,D) # check for 'asm goto' ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC)), y) KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO + KBUILD_AFLAGS += -DCC_HAVE_ASM_GOTO endif -# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments -KBUILD_CPPFLAGS += $(KCPPFLAGS) -KBUILD_AFLAGS += $(KAFLAGS) -KBUILD_CFLAGS += $(KCFLAGS) +include scripts/Makefile.kasan +include scripts/Makefile.extrawarn + +# Add any arch overrides and user supplied CPPFLAGS, AFLAGS and CFLAGS as the +# last assignments +KBUILD_CPPFLAGS += $(ARCH_CPPFLAGS) $(KCPPFLAGS) +KBUILD_AFLAGS += $(ARCH_AFLAGS) $(KAFLAGS) +KBUILD_CFLAGS += $(ARCH_CFLAGS) $(KCFLAGS) # Use --build-id when available. LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\ @@ -699,6 +830,13 @@ export INSTALL_PATH ?= /boot # +# INSTALL_DTBS_PATH specifies a prefix for relocations required by build roots. +# Like INSTALL_MOD_PATH, it isn't defined in the Makefile, but can be passed as +# an argument if needed. Otherwise it defaults to the kernel install path +# +export INSTALL_DTBS_PATH ?= $(INSTALL_PATH)/dtbs/$(KERNELRELEASE) + +# # INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory # relocations required by build roots. This is not defined in the # makefile but the argument can be passed to make if needed. @@ -708,10 +846,10 @@ export MODLIB # -# INSTALL_MOD_STRIP, if defined, will cause modules to be -# stripped after they are installed. If INSTALL_MOD_STRIP is '1', then -# the default option --strip-debug will be used. Otherwise, -# INSTALL_MOD_STRIP value will be used as the options to the strip command. +# INSTALL_MOD_STRIP, if defined, will cause modules to be +# stripped after they are installed. If INSTALL_MOD_STRIP is '1', then +# the default option --strip-debug will be used. Otherwise, +# INSTALL_MOD_STRIP value will be used as the options to the strip command. ifdef INSTALL_MOD_STRIP ifeq ($(INSTALL_MOD_STRIP),1) @@ -724,12 +862,38 @@ endif # INSTALL_MOD_STRIP export mod_strip_cmd +# CONFIG_MODULE_COMPRESS, if defined, will cause module to be compressed +# after they are installed in agreement with CONFIG_MODULE_COMPRESS_GZIP +# or CONFIG_MODULE_COMPRESS_XZ. + +mod_compress_cmd = true +ifdef CONFIG_MODULE_COMPRESS + ifdef CONFIG_MODULE_COMPRESS_GZIP + mod_compress_cmd = gzip -n -f + endif # CONFIG_MODULE_COMPRESS_GZIP + ifdef CONFIG_MODULE_COMPRESS_XZ + mod_compress_cmd = xz -f + endif # CONFIG_MODULE_COMPRESS_XZ +endif # CONFIG_MODULE_COMPRESS +export mod_compress_cmd + +# Select initial ramdisk compression format, default is gzip(1). +# This shall be used by the dracut(8) tool while creating an initramfs image. +# +INITRD_COMPRESS-y := gzip +INITRD_COMPRESS-$(CONFIG_RD_BZIP2) := bzip2 +INITRD_COMPRESS-$(CONFIG_RD_LZMA) := lzma +INITRD_COMPRESS-$(CONFIG_RD_XZ) := xz +INITRD_COMPRESS-$(CONFIG_RD_LZO) := lzo +INITRD_COMPRESS-$(CONFIG_RD_LZ4) := lz4 +# do not export INITRD_COMPRESS, since we didn't actually +# choose a sane default compression above. +# export INITRD_COMPRESS := $(INITRD_COMPRESS-y) ifdef CONFIG_MODULE_SIG_ALL -MODSECKEY = ./signing_key.priv -MODPUBKEY = ./signing_key.x509 -export MODPUBKEY -mod_sign_cmd = perl $(srctree)/scripts/sign-file $(CONFIG_MODULE_SIG_HASH) $(MODSECKEY) $(MODPUBKEY) +$(eval $(call config_filename,MODULE_SIG_KEY)) + +mod_sign_cmd = scripts/sign-file $(CONFIG_MODULE_SIG_HASH) $(MODULE_SIG_KEY_SRCPREFIX)$(CONFIG_MODULE_SIG_KEY) certs/signing_key.x509 else mod_sign_cmd = true endif @@ -737,16 +901,14 @@ ifeq ($(KBUILD_EXTMOD),) -core-y += kernel/ mm/ fs/ ipc/ security/ crypto/ block/ +core-y += kernel/ certs/ mm/ fs/ ipc/ security/ crypto/ block/ vmlinux-dirs := $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \ $(core-y) $(core-m) $(drivers-y) $(drivers-m) \ - $(net-y) $(net-m) $(libs-y) $(libs-m))) + $(net-y) $(net-m) $(libs-y) $(libs-m) $(virt-y))) vmlinux-alldirs := $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \ - $(init-n) $(init-) \ - $(core-n) $(core-) $(drivers-n) $(drivers-) \ - $(net-n) $(net-) $(libs-n) $(libs-)))) + $(init-) $(core-) $(drivers-) $(net-) $(libs-) $(virt-)))) init-y := $(patsubst %/, %/built-in.o, $(init-y)) core-y := $(patsubst %/, %/built-in.o, $(core-y)) @@ -755,14 +917,15 @@ libs-y1 := $(patsubst %/, %/lib.a, $(libs-y)) libs-y2 := $(patsubst %/, %/built-in.o, $(libs-y)) libs-y := $(libs-y1) $(libs-y2) +virt-y := $(patsubst %/, %/built-in.o, $(virt-y)) # Externally visible symbols (used by link-vmlinux.sh) export KBUILD_VMLINUX_INIT := $(head-y) $(init-y) -export KBUILD_VMLINUX_MAIN := $(core-y) $(libs-y) $(drivers-y) $(net-y) +export KBUILD_VMLINUX_MAIN := $(core-y) $(libs-y) $(drivers-y) $(net-y) $(virt-y) export KBUILD_LDS := arch/$(SRCARCH)/kernel/vmlinux.lds export LDFLAGS_vmlinux # used by scripts/pacmage/Makefile -export KBUILD_ALLDIRS := $(sort $(filter-out arch/%,$(vmlinux-alldirs)) arch Documentation include samples scripts tools virt) +export KBUILD_ALLDIRS := $(sort $(filter-out arch/%,$(vmlinux-alldirs)) arch Documentation include samples scripts tools) vmlinux-deps := $(KBUILD_LDS) $(KBUILD_VMLINUX_INIT) $(KBUILD_VMLINUX_MAIN) @@ -782,9 +945,12 @@ ifdef CONFIG_BUILD_DOCSRC $(Q)$(MAKE) $(build)=Documentation endif +ifdef CONFIG_GDB_SCRIPTS + $(Q)ln -fsn `cd $(srctree) && /bin/pwd`/scripts/gdb/vmlinux-gdb.py +endif +$(call if_changed,link-vmlinux) -# The actual objects are generated when descending, +# The actual objects are generated when descending, # make sure no implicit rule kicks in $(sort $(vmlinux-deps)): $(vmlinux-dirs) ; @@ -798,10 +964,13 @@ $(vmlinux-dirs): prepare scripts $(Q)$(MAKE) $(build)=$@ -# Store (new) KERNELRELASE string in include/config/kernel.release +define filechk_kernel.release + echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" +endef + +# Store (new) KERNELRELEASE string in include/config/kernel.release include/config/kernel.release: include/config/auto.conf FORCE - $(Q)rm -f $@ - $(Q)echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" > $@ + $(call filechk,kernel.release) # Things we need to do before we recursively start building the kernel @@ -864,6 +1033,7 @@ $(version_h): $(srctree)/Makefile FORCE $(call filechk,version.h) + $(Q)rm -f $(old_version_h) include/generated/utsrelease.h: include/config/kernel.release FORCE $(call filechk,utsrelease.h) @@ -874,12 +1044,6 @@ $(srctree)/scripts/headerdep.pl -I$(srctree)/include # --------------------------------------------------------------------------- - -PHONY += depend dep -depend dep: - @echo '*** Warning: make $@ is unnecessary now.' - -# --------------------------------------------------------------------------- # Firmware install INSTALL_FW_PATH=$(INSTALL_MOD_PATH)/lib/firmware export INSTALL_FW_PATH @@ -895,8 +1059,6 @@ #Default location for installed headers export INSTALL_HDR_PATH = $(objtree)/usr -hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj - # If we do an all arch process set dst to asm-$(hdr-arch) hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm) @@ -931,6 +1093,16 @@ $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/asm $(hdr-dst) HDRCHECK=1 # --------------------------------------------------------------------------- +# Kernel selftest + +PHONY += kselftest +kselftest: + $(Q)$(MAKE) -C tools/testing/selftests run_tests + +kselftest-clean: + $(Q)$(MAKE) -C tools/testing/selftests clean + +# --------------------------------------------------------------------------- # Modules ifdef CONFIG_MODULES @@ -939,11 +1111,11 @@ all: modules -# Build modules +# Build modules # -# A module can be listed more than once in obj-m resulting in -# duplicate lines in modules.order files. Those are removed -# using awk while concatenating to the final file. +# A module can be listed more than once in obj-m resulting in +# duplicate lines in modules.order files. Those are removed +# using awk while concatenating to the final file. PHONY += modules modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin @@ -972,10 +1144,10 @@ @rm -rf $(MODLIB)/kernel @rm -f $(MODLIB)/source @mkdir -p $(MODLIB)/kernel - @ln -s $(srctree) $(MODLIB)/source + @ln -s `cd $(srctree) && /bin/pwd` $(MODLIB)/source @if [ ! $(objtree) -ef $(MODLIB)/build ]; then \ rm -f $(MODLIB)/build ; \ - ln -s $(objtree) $(MODLIB)/build ; \ + ln -s $(CURDIR) $(MODLIB)/build ; \ fi @cp -f $(objtree)/modules.order $(MODLIB)/ @cp -f $(objtree)/modules.builtin $(MODLIB)/ @@ -1022,12 +1194,12 @@ # Directories & files removed with 'make mrproper' MRPROPER_DIRS += include/config usr/include include/generated \ - arch/*/include/generated -MRPROPER_FILES += .config .config.old .version .old_version $(version_h) \ + arch/*/include/generated .tmp_objdiff +MRPROPER_FILES += .config .config.old .version .old_version \ Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \ - signing_key.priv signing_key.x509 x509.genkey \ - extra_certificates signing_key.x509.keyid \ - signing_key.x509.signer + signing_key.pem signing_key.priv signing_key.x509 \ + x509.genkey extra_certificates signing_key.x509.keyid \ + signing_key.x509.signer vmlinux-gdb.py # clean - Delete most, but leave enough to build external modules # @@ -1066,15 +1238,14 @@ @find $(srctree) $(RCS_FIND_IGNORE) \ \( -name '*.orig' -o -name '*.rej' -o -name '*~' \ -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \ - -o -name '.*.rej' \ - -o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \ + -o -name '.*.rej' -o -name '*%' -o -name 'core' \) \ -type f -print | xargs rm -f # Packaging of the kernel to various formats # --------------------------------------------------------------------------- # rpm target kept for backward compatibility -package-dir := $(srctree)/scripts/package +package-dir := scripts/package %src-pkg: FORCE $(Q)$(MAKE) $(build)=$(package-dir) $@ @@ -1088,7 +1259,7 @@ # --------------------------------------------------------------------------- boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig) -boards := $(notdir $(boards)) +boards := $(sort $(notdir $(boards))) board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig)) board-dirs := $(sort $(notdir $(board-dirs:/=))) @@ -1110,7 +1281,7 @@ @echo ' firmware_install- Install all firmware to INSTALL_FW_PATH' @echo ' (default: $$(INSTALL_MOD_PATH)/lib/firmware)' @echo ' dir/ - Build all files in dir and below' - @echo ' dir/file.[oisS] - Build specified target only' + @echo ' dir/file.[ois] - Build specified target only' @echo ' dir/file.lst - Build specified mixed source/assembly target only' @echo ' (requires a recent binutils and recent build (System.map))' @echo ' dir/file.ko - Build module including final link' @@ -1118,8 +1289,9 @@ @echo ' tags/TAGS - Generate tags file for editors' @echo ' cscope - Generate cscope index' @echo ' gtags - Generate GNU GLOBAL index' - @echo ' kernelrelease - Output the release version string' - @echo ' kernelversion - Output the version stored in Makefile' + @echo ' kernelrelease - Output the release version string (use with make -s)' + @echo ' kernelversion - Output the version stored in Makefile (use with make -s)' + @echo ' image_name - Output the image name (use with make -s)' @echo ' headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \ echo ' (default: $(INSTALL_HDR_PATH))'; \ echo '' @@ -1133,6 +1305,12 @@ @echo ' headerdep - Detect inclusion cycles in headers' @$(MAKE) -f $(srctree)/scripts/Makefile.help checker-help @echo '' + @echo 'Kernel selftest' + @echo ' kselftest - Build and run kernel selftest (run as root)' + @echo ' Build, install, and boot kernel before' + @echo ' running kselftest on it' + @echo ' kselftest-clean - Remove all generated kselftest files' + @echo '' @echo 'Kernel packaging:' @$(MAKE) $(build)=$(package-dir) help @echo '' @@ -1173,7 +1351,7 @@ help-boards: $(help-board-dirs) -boards-per-dir = $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig)) +boards-per-dir = $(sort $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig))) $(help-board-dirs): help-%: @echo 'Architecture specific targets ($(SRCARCH) $*):' @@ -1186,7 +1364,7 @@ # Documentation targets # --------------------------------------------------------------------------- %docs: scripts_basic FORCE - $(Q)$(MAKE) $(build)=scripts build_docproc + $(Q)$(MAKE) $(build)=scripts build_docproc build_check-lc_ctype $(Q)$(MAKE) $(build)=Documentation/DocBook $@ else # KBUILD_EXTMOD @@ -1274,6 +1452,8 @@ @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \ \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ -o -name '*.ko.*' \ + -o -name '*.dwo' \ + -o -name '*.su' \ -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \ -o -name '*.symtypes' -o -name 'modules.order' \ -o -name modules.builtin -o -name '.tmp_*.o.*' \ @@ -1314,7 +1494,7 @@ endif #ifeq ($(config-targets),1) endif #ifeq ($(mixed-targets),1) -PHONY += checkstack kernelrelease kernelversion +PHONY += checkstack kernelrelease kernelversion image_name # UML needs a little special treatment here. It wants to use the host # toolchain, so needs $(SUBARCH) passed to checkstack.pl. Everyone @@ -1335,14 +1515,17 @@ kernelversion: @echo $(KERNELVERSION) +image_name: + @echo $(KBUILD_IMAGE) + # Clear a bunch of variables before executing the submake tools/: FORCE $(Q)mkdir -p $(objtree)/tools - $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(filter --j% -j,$(MAKEFLAGS))" O=$(objtree) subdir=tools -C $(src)/tools/ + $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(filter --j% -j,$(MAKEFLAGS))" O=$(shell cd $(objtree) && /bin/pwd) subdir=tools -C $(src)/tools/ tools/%: FORCE $(Q)mkdir -p $(objtree)/tools - $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(filter --j% -j,$(MAKEFLAGS))" O=$(objtree) subdir=tools -C $(src)/tools/ $* + $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(filter --j% -j,$(MAKEFLAGS))" O=$(shell cd $(objtree) && /bin/pwd) subdir=tools -C $(src)/tools/ $* # Single targets # --------------------------------------------------------------------------- @@ -1383,6 +1566,8 @@ $(cmd_crmodverdir) $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ $(build)=$(build-dir) +# Make sure the latest headers are built for Documentation +Documentation/: headers_install %/: prepare scripts FORCE $(cmd_crmodverdir) $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ @@ -1393,7 +1578,7 @@ $(build)=$(build-dir) $(@:.ko=.o) $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost -# FIXME Should go into a make.lib or something +# FIXME Should go into a make.lib or something # =========================================================================== quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs))) @@ -1422,10 +1607,7 @@ include $(cmd_files) endif -# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir -# Usage: -# $(Q)$(MAKE) $(clean)=dir -clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj +-include $(srctree)/avm/make/generated/linux.make endif # skip-makefile