--- zzzz-none-000/linux-3.10.107/arch/arm/boot/dts/armada-370-rd.dts 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/arch/arm/boot/dts/armada-370-rd.dts 2021-02-04 17:41:59.000000000 +0000 @@ -6,20 +6,65 @@ * * Copyright (C) 2013 Florian Fainelli * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Note: this Device Tree assumes that the bootloader has remapped the + * internal registers to 0xf1000000 (instead of the default + * 0xd0000000). The 0xf1000000 is the default used by the recent, + * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier + * boards were delivered with an older version of the bootloader that + * left internal registers mapped at 0xd0000000. If you are in this + * situation, you should either update your bootloader (preferred + * solution) or the below Device Tree should be adjusted. */ /dts-v1/; -/include/ "armada-370.dtsi" +#include +#include +#include "armada-370.dtsi" / { model = "Marvell Armada 370 Reference Design"; compatible = "marvell,a370-rd", "marvell,armada370", "marvell,armada-370-xp"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { @@ -28,9 +73,28 @@ }; soc { + ranges = ; + + pcie-controller { + status = "okay"; + + /* Internal mini-PCIe connector */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Internal mini-PCIe connector */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + }; + internal-regs { serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; sata@a0000 { @@ -39,13 +103,11 @@ }; mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; phy0: ethernet-phy@0 { reg = <0>; }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; }; ethernet@70000 { @@ -54,9 +116,14 @@ phy-mode = "sgmii"; }; ethernet@74000 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; - phy = <&phy1>; phy-mode = "rgmii-id"; + fixed-link { + speed = <1000>; + full-duplex; + }; }; mvsdio@d4000 { @@ -64,6 +131,7 @@ pinctrl-names = "default"; status = "okay"; /* No CD or WP GPIOs */ + broken-cd; }; usb@50000 { @@ -80,10 +148,103 @@ #size-cells = <0>; button@1 { label = "Software Button"; - linux,code = <116>; - gpios = <&gpio0 6 1>; + linux,code = ; + gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-fan { + compatible = "gpio-fan"; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = <0 0 3000 1>; + pinctrl-0 = <&fan_pins>; + pinctrl-names = "default"; + }; + + gpio_leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + sw_led { + label = "370rd:green:sw"; + gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + }; + + nand@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + + partition@0 { + label = "U-Boot"; + reg = <0 0x800000>; + }; + partition@800000 { + label = "Linux"; + reg = <0x800000 0x800000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; }; }; }; }; + + dsa@0 { + compatible = "marvell,dsa"; + #address-cells = <2>; + #size-cells = <0>; + + dsa,ethernet = <ð1>; + dsa,mii-bus = <&mdio>; + + switch@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10 0>; /* MDIO address 16, switch 0 in tree */ + + port@0 { + reg = <0>; + label = "lan0"; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + }; + }; + }; }; + +&pinctrl { + fan_pins: fan-pins { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + + led_pins: led-pins { + marvell,pins = "mpp32"; + marvell,function = "gpio"; + }; +};