--- zzzz-none-000/linux-3.10.107/arch/arm/boot/dts/armada-370.dtsi 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/arch/arm/boot/dts/armada-370.dtsi 2021-02-04 17:41:59.000000000 +0000 @@ -7,15 +7,49 @@ * Gregory CLEMENT * Thomas Petazzoni * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. * * Contains definitions specific to the Armada 370 SoC that are not * common to all Armada SoCs. */ -/include/ "armada-370-xp.dtsi" +#include "armada-370-xp.dtsi" /include/ "skeleton.dtsi" / { @@ -29,46 +63,101 @@ }; soc { - ranges = <0 0xd0000000 0x0100000 /* internal registers */ - 0xe0000000 0xe0000000 0x8100000 /* PCIe */>; - internal-regs { - system-controller@18200 { - compatible = "marvell,armada-370-xp-system-controller"; - reg = <0x18200 0x100>; + compatible = "marvell,armada370-mbus", "simple-bus"; + + bootrom { + compatible = "marvell,bootrom"; + reg = ; + }; + + pcie-controller { + compatible = "marvell,armada-370-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + msi-parent = <&mpic>; + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 + 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ + 0x82000000 0x2 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x2 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>; + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; }; + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 9>; + status = "disabled"; + }; + }; + + internal-regs { L2: l2-cache { compatible = "marvell,aurora-outer-cache"; reg = <0x08000 0x1000>; cache-id-part = <0x100>; + cache-level = <2>; + cache-unified; wt-override; }; - interrupt-controller@20000 { - reg = <0x20a00 0x1d0>, <0x21870 0x58>; + /* + * Default SPI pinctrl setting, can be overwritten on + * board level if a different configuration is used. + */ + spi0: spi@10600 { + compatible = "marvell,armada-370-spi", + "marvell,orion-spi"; + pinctrl-0 = <&spi0_pins1>; + pinctrl-names = "default"; + }; + + spi1: spi@10680 { + compatible = "marvell,armada-370-spi", + "marvell,orion-spi"; + pinctrl-0 = <&spi1_pins>; + pinctrl-names = "default"; }; - pinctrl { - compatible = "marvell,mv88f6710-pinctrl"; - reg = <0x18000 0x38>; - - sdio_pins1: sdio-pins1 { - marvell,pins = "mpp9", "mpp11", "mpp12", - "mpp13", "mpp14", "mpp15"; - marvell,function = "sd0"; - }; - - sdio_pins2: sdio-pins2 { - marvell,pins = "mpp47", "mpp48", "mpp49", - "mpp50", "mpp51", "mpp52"; - marvell,function = "sd0"; - }; + i2c0: i2c@11000 { + reg = <0x11000 0x20>; + }; - sdio_pins3: sdio-pins3 { - marvell,pins = "mpp48", "mpp49", "mpp50", - "mpp51", "mpp52", "mpp53"; - marvell,function = "sd0"; - }; + i2c1: i2c@11100 { + reg = <0x11100 0x20>; }; gpio0: gpio@18100 { @@ -78,7 +167,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupts-cells = <2>; + #interrupt-cells = <2>; interrupts = <82>, <83>, <84>, <85>; }; @@ -89,7 +178,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupts-cells = <2>; + #interrupt-cells = <2>; interrupts = <87>, <88>, <89>, <90>; }; @@ -100,14 +189,28 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupts-cells = <2>; + #interrupt-cells = <2>; interrupts = <91>; }; - coreclk: mvebu-sar@18230 { - compatible = "marvell,armada-370-core-clock"; - reg = <0x18230 0x08>; - #clock-cells = <1>; + /* + * Default UART pinctrl setting without RTS/CTS, can + * be overwritten on board level if a different + * configuration is used. + */ + uart0: serial@12000 { + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; + }; + + uart1: serial@12100 { + pinctrl-0 = <&uart1_pins>; + pinctrl-names = "default"; + }; + + system-controller@18200 { + compatible = "marvell,armada-370-xp-system-controller"; + reg = <0x18200 0x100>; }; gateclk: clock-gating-control@18220 { @@ -117,6 +220,65 @@ #clock-cells = <1>; }; + coreclk: mvebu-sar@18230 { + compatible = "marvell,armada-370-core-clock"; + reg = <0x18230 0x08>; + #clock-cells = <1>; + }; + + thermal@18300 { + compatible = "marvell,armada370-thermal"; + reg = <0x18300 0x4 + 0x18304 0x4>; + status = "okay"; + }; + + sscg@18330 { + reg = <0x18330 0x4>; + }; + + interrupt-controller@20a00 { + reg = <0x20a00 0x1d0>, <0x21870 0x58>; + }; + + timer@20300 { + compatible = "marvell,armada-370-timer"; + clocks = <&coreclk 2>; + }; + + watchdog@20300 { + compatible = "marvell,armada-370-wdt"; + clocks = <&coreclk 2>; + }; + + cpurst@20800 { + compatible = "marvell,armada-370-cpu-reset"; + reg = <0x20800 0x8>; + }; + + cpu-config@21000 { + compatible = "marvell,armada-370-cpu-config"; + reg = <0x21000 0x8>; + }; + + audio_controller: audio-controller@30000 { + #sound-dai-cells = <1>; + compatible = "marvell,armada370-audio"; + reg = <0x30000 0x4000>; + interrupts = <93>; + clocks = <&gateclk 0>; + clock-names = "internal"; + status = "disabled"; + }; + + usb@50000 { + clocks = <&coreclk 0>; + }; + + usb@51000 { + clocks = <&coreclk 0>; + }; + xor@60800 { compatible = "marvell,orion-xor"; reg = <0x60800 0x100 @@ -155,72 +317,133 @@ }; }; - usb@50000 { - clocks = <&coreclk 0>; + ethernet@70000 { + compatible = "marvell,armada-370-neta"; }; - usb@51000 { - clocks = <&coreclk 0>; + ethernet@74000 { + compatible = "marvell,armada-370-neta"; }; - thermal@18300 { - compatible = "marvell,armada370-thermal"; - reg = <0x18300 0x4 - 0x18304 0x4>; - status = "okay"; + crypto@90000 { + compatible = "marvell,armada-370-crypto"; + reg = <0x90000 0x10000>; + reg-names = "regs"; + interrupts = <48>; + clocks = <&gateclk 23>; + clock-names = "cesa0"; + marvell,crypto-srams = <&crypto_sram>; + marvell,crypto-sram-size = <0x7e0>; }; + }; - pcie-controller { - compatible = "marvell,armada-370-pcie"; - status = "disabled"; - device_type = "pci"; + crypto_sram: sa-sram { + compatible = "mmio-sram"; + reg = ; + reg-names = "sram"; + clocks = <&gateclk 23>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x09, 0x01) 0 0x800>; + + /* + * The Armada 370 has an erratum preventing the use of + * the standard workflow for CPU idle support (relying + * on the BootROM code to enter/exit idle state). + * Reserve some amount of the crypto SRAM to put the + * cpuidle workaround. + */ + idle-sram@0 { + reg = <0x0 0x20>; + }; + }; + }; +}; - #address-cells = <3>; - #size-cells = <2>; +&pinctrl { + compatible = "marvell,mv88f6710-pinctrl"; + + spi0_pins1: spi0-pins1 { + marvell,pins = "mpp33", "mpp34", + "mpp35", "mpp36"; + marvell,function = "spi0"; + }; - bus-range = <0x00 0xff>; + spi0_pins2: spi0_pins2 { + marvell,pins = "mpp32", "mpp63", + "mpp64", "mpp65"; + marvell,function = "spi0"; + }; - reg = <0x40000 0x2000>, <0x80000 0x2000>; + spi1_pins: spi1-pins { + marvell,pins = "mpp49", "mpp50", + "mpp51", "mpp52"; + marvell,function = "spi1"; + }; - reg-names = "pcie0.0", "pcie1.0"; + uart0_pins: uart0-pins { + marvell,pins = "mpp0", "mpp1"; + marvell,function = "uart0"; + }; - ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ - 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ - - pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 5>; - status = "disabled"; - }; + uart1_pins: uart1-pins { + marvell,pins = "mpp41", "mpp42"; + marvell,function = "uart1"; + }; - pcie@2,0 { - device_type = "pci"; - assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 62>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 9>; - status = "disabled"; - }; - }; - }; + sdio_pins1: sdio-pins1 { + marvell,pins = "mpp9", "mpp11", "mpp12", + "mpp13", "mpp14", "mpp15"; + marvell,function = "sd0"; + }; + + sdio_pins2: sdio-pins2 { + marvell,pins = "mpp47", "mpp48", "mpp49", + "mpp50", "mpp51", "mpp52"; + marvell,function = "sd0"; + }; + + sdio_pins3: sdio-pins3 { + marvell,pins = "mpp48", "mpp49", "mpp50", + "mpp51", "mpp52", "mpp53"; + marvell,function = "sd0"; + }; + + i2c0_pins: i2c0-pins { + marvell,pins = "mpp2", "mpp3"; + marvell,function = "i2c0"; + }; + + i2s_pins1: i2s-pins1 { + marvell,pins = "mpp5", "mpp6", "mpp7", + "mpp8", "mpp9", "mpp10", + "mpp12", "mpp13"; + marvell,function = "audio"; + }; + + i2s_pins2: i2s-pins2 { + marvell,pins = "mpp49", "mpp47", "mpp50", + "mpp59", "mpp57", "mpp61", + "mpp62", "mpp60", "mpp58"; + marvell,function = "audio"; + }; + + mdio_pins: mdio-pins { + marvell,pins = "mpp17", "mpp18"; + marvell,function = "ge"; + }; + + ge0_rgmii_pins: ge0-rgmii-pins { + marvell,pins = "mpp5", "mpp6", "mpp7", "mpp8", + "mpp9", "mpp10", "mpp11", "mpp12", + "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "ge0"; + }; + + ge1_rgmii_pins: ge1-rgmii-pins { + marvell,pins = "mpp19", "mpp20", "mpp21", "mpp22", + "mpp23", "mpp24", "mpp25", "mpp26", + "mpp27", "mpp28", "mpp29", "mpp30"; + marvell,function = "ge1"; }; };